Search NASA⌕ Search

SEARCH · Search NASA

Results for “jet algorithms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Aerodynamic Interference Due to MSL Reaction Control System

An investigation of effectiveness of the reaction control system (RCS) of Mars Science Laboratory (MSL) entry capsule during atmospheric flight has been conducted. The reason for the investigation is that MSL is designed to fly a lifting actively guided entry with hypersonic bank maneuvers, therefore an understanding of RCS effectiveness is required. In the course of the study several jet configurations were evaluated using Langley Aerothermal Upwind Relaxation Algorithm (LAURA) code, Data Parallel Line Relaxation (DPLR) code, Fully Unstructured 3D (FUN3D) code and an Overset Grid Flowsolver (OVERFLOW) code. Computations indicated that some of the proposed configurations might induce aero-RCS interactions, sufficient to impede and even overwhelm the intended control torques. It was found that the maximum potential for aero-RCS interference exists around peak dynamic pressure along the trajectory. Present analysis largely relies on computational methods. Ground testing, flight data and computational analyses are required to fully understand the problem. At the time of this writing some experimental work spanning range of Mach number 2.5 through 4.5 has been completed and used to establish preliminary levels of confidence for computations. As a result of the present work a final RCS configuration has been designed such as to minimize aero-interference effects and it is a design baseline for MSL entry capsule.

Dyakonov, Artem A.↗

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

The Large Hadron Collider (LHC) at CERN promises a major step forward in the understanding of the fundamental nature of matter. The ATLAS experiment is a general-purpose detector for the LHC, whose design was guided by the need to accommodate the wide spectrum of possible physics signatures. The major remit of the ATLAS experiment is the exploration of the TeV mass scale where groundbreaking discoveries are expected. In the focus are the investigation of the electroweak symmetry breaking and linked to this the search for the Higgs boson as well as the search for Physics beyond the Standard Model. In this report a detailed examination of the expected performance of the ATLAS detector is provided, with a major aim being to investigate the experimental sensitivity to a wide range of measurements and potential observations of new physical processes. An earlier summary of the expected capabilities of ATLAS was compiled in 1999 [1]. A survey of physics capabilities of the CMS detector was published in [2]. The design of the ATLAS detector has now been finalised, and its construction and installation have been completed [3]. An extensive test-beam programme was undertaken. Furthermore, the simulation and reconstruction software code and frameworks have been completely rewritten. Revisions incorporated reflect improved detector modelling as well as major technical changes to the software technology. Greatly improved understanding of calibration and alignment techniques, and their practical impact on performance, is now in place. The studies reported here are based on full simulations of the ATLAS detector response. A variety of event generators were employed. The simulation and reconstruction of these large event samples thus provided an important operational test of the new ATLAS software system. In addition, the processing was distributed world-wide over the ATLAS Grid facilities and hence provided an important test of the ATLAS computing system - this is the origin of the expression 'CSC studies' ('computing system commissioning'), which is occasionally referred to in these volumes. The work reported does generally assume that the detector is fully operational, and in this sense represents an idealised detector: establishing the best performance of the ATLAS detector with LHC proton-proton collisions is a challenging task for the future. The results summarised here therefore represent the best estimate of ATLAS capabilities before real operational experience of the full detector with beam. Unless otherwise stated, simulations also do not include the effect of additional interactions in the same or other bunch-crossings, and the effect of neutron background is neglected. Thus simulations correspond to the low-luminosity performance of the ATLAS detector. This report is broadly divided into two parts: firstly the performance for identification of physics objects is examined in detail, followed by a detailed assessment of the performance of the trigger system. This part is subdivided into chapters surveying the capabilities for charged particle tracking, each of electron/photon, muon and tau identification, jet and missing transverse energy reconstruction, b-tagging algorithms and performance, and finally the trigger system performance. In each chapter of the report, there is a further subdivision into shorter notes describing different aspects studied. The second major subdivision of the report addresses physics measurement capabilities, and new physics search sensitivities. Individual chapters in this part discuss ATLAS physics capabilities in Standard Model QCD and electroweak processes, in the top quark sector, in b-physics, in searches for Higgs bosons, supersymmetry searches, and finally searches for other new particles predicted in more exotic models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Automated Approach to Accurate, Precise, and Fast Detector Simulation and Reconstruction

Detector simulation and reconstruction are a significant computational bottleneck in particle physics. Here, we develop particle-flow neural-assisted simulations (parnassus) to address this challenge. Our deep learning model takes as input a point cloud (particles impinging on a detector) and produces a point cloud (reconstructed particles). By combining detector simulations and reconstruction into one step, we aim to minimize resource utilization and enable fast surrogate models suitable for application both inside and outside large collaborations. We demonstrate this approach using a publicly available dataset of jets passed through the full simulation and reconstruction pipeline of the Compact Muon Solenoid (CMS) experiment. We show that parnassus accurately mimics the CMS particle flow algorithm on the (statistically) same events it was trained on and can generalize to jet momentum and type outside of the training distribution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sensor failure detection for jet engines

Revisions to the advanced sensor failure detection, isolation, and accommodation (DIA) algorithm, developed under the sensor failure detection system program were studied to eliminate the steady state errors due to estimation filter biases. Three algorithm revisions were formulated and one revision for detailed evaluation was chosen. The selected version modifies the DIA algorithm to feedback the actual sensor outputs to the integral portion of the control for the nofailure case. In case of a failure, the estimates of the failed sensor output is fed back to the integral portion. The estimator outputs are fed back to the linear regulator portion of the control all the time. The revised algorithm is evaluated and compared to the baseline algorithm developed previously.

Beattie, E. C.↗

Acoustic analysis using numerical solutions of the Navier-Stokes equations

Numerical solutions of the time-dependent compressible Navier-Stokes equations are employed to analyze the unsteady features of jet flows which contribute to jet noise. The turbulent-mass flux spectra are examined in detail in the numerical analysis, and MacCormack's explicit finite difference algorithm is used to solve the governing equations. The computational grid is based on an axisymmetric jet with simple exponential stretching used to optimize the resolution of critical unsteady flow features. The time-varying numerical data are analyzed, and the time averages of the velocity and turbulence-intensity profiles are shown to agree with experimental data. Grid refinement and longer run times improved the prediction of the experimental mass-flux spectra. The numerical procedure can be extended to 3D jet-flow configurations to study the related 3D unsteady flow features.

Scott, James N.↗

Measurement of exclusive dijet production in diffractive DIS with the ZEUS detector at HERA

The exclusive production of dijets in diffractive deep inelastic lepton–proton scattering has been measured with the ZEUS detector at HERA with an integrated luminosity of 372 pb{sup −1}. Jets have been reconstructed in the photon–Pomeron rest frame using the exclusive k{sub T} algorithm. The shape of the differential cross-section as a function of the angle between the plane spanned by the incoming and scattered lepton momenta and the plane spanned by the virtual photon and jets momenta is presented. The shape is determined by the jet production mechanism and provides information about the Pomeron structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diquark scalar production of a vectorlike quark pair at the LHC

We study the discovery potential of LHC experiments for resonantly produced vectorlike quarks ($\chi$) when the $s$-channel resonance is an ultraheavy scalar diquark ($S_{uu}$) with a mass in the 7–8.5 TeV range. Focusing on the process $pp \rightarrow S_{uu} \rightarrow \chi \chi \rightarrow (W^+b)(W^+b)$ we target the fully hadronic decay mode of both $W^+$ bosons, resulting in a six-jet final state. Signal–background separation is performed using Machine Learning algorithms trained to construct a multidimensional classifier. Our results show that ATLAS or CMS searches in this channel, with an integrated luminosity of 3000 fb$^{-1}$, could discover or exclude a scalar diquark with a mass near 8 TeV even for a relatively small Yukawa coupling to up quarks, $y_{uu} \simeq 0.2$. We also present preliminary studies of the four-jet final state from $pp \rightarrow S_{uu} \rightarrow u \chi \rightarrow u (W^+b)$.

Duminica, Ioana [Bucharest, IFIN-HH; Bucharest U.]↗

Velocity field measurement of a round jet using quantitative schlieren

This paper utilizes the background oriented schlieren (BOS) technique to measure the velocity field of a variable density round jet. The density field of the jet is computed based on the light deflection created during the passage of light through the understudy jet. The deflection vector estimation was carried out using phase-based optical flow algorithms. The density field is further exploited to extract the axial and radial velocity vectors with the aid of continuity and energy equations. The experiment is conducted at six different jet-exit temperature values. Additional turbulence parameters, such as velocity variance and power spectral density of the vector field, are also computed. Finally, the measured velocity parameters are compared with the hot wire anemometer measurements and their correlation is displayed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Concentration fluctuations and flammability of cryo-compressed hydrogen and methane jets

Compressed hydrogen stored at cryogenic temperatures has a much higher density than room-temperature storage, which enables large-scale hydrogen storage and transport. An understanding of the release of cryogenic hydrogen from pressurized vessels is needed to evaluate the risk and safety concerns with the use of this fuel. Here, the present work extends the analysis of previous experimental studies that measured the gas concentrations of cryo-compressed hydrogen jets and methane jets using a laser Raman scattering diagnostic system. Since the Raman signals are very small, a denoising algorithm was applied to significantly reduce the noise to enable statistical analysis of the data. The transient features of the turbulent jets were characterized by their concentration intermittencies and probability density functions (PDFs). A two-part PDF was developed to predict the bimodal features of the jet concentration distributions. Then, the flammability factors of the cryogenic jets were calculated based on the intermittency and the PDF.

33 ADVANCED PROPULSION SYSTEMS↗

Centrality dependence of charged jet production in p–Pb collisions at $\sqrt{s_\mathrm{NN}}$ = 5.02 TeV

Measurements of charged jet production as a function of centrality are presented for p–Pb collisions recorded at $\sqrt{s_\mathrm{NN}}$= 5.02 TeV with the ALICE detector. Centrality classes are determined via the energy deposit in neutron calorimeters at zero degree, close to the beam direction, to minimise dynamical biases of the selection. The corresponding number of participants or binary nucleon–nucleon collisions is determined based on the particle production in the Pb-going rapidity region. Jets have been reconstructed in the central rapidity region from charged particles with the anti-k T algorithm for resolution parameters R = 0.2 and R = 0.4 in the transverse momentum range 20 to 120 GeV/c. The reconstructed jet momentum and yields have been corrected for detector effects and underlying-event background. In the five centrality bins considered, the charged jet production in p–Pb collisions is consistent with the production expected from binary scaling from pp collisions. The ratio of jet yields reconstructed with the two different resolution parameters is also independent of the centrality selection, demonstrating the absence of major modifications of the radial jet structure in the reported centrality classes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparative Analysis of Direct and Indirect Cooling of Wide-Bandgap Power Modules and Performance Enhancement of Jet Impingement-Based Direct Substrate Cooling

With the development of high-power and high-torque machines, requirements for high-power density electronics are increasing. Thermal management of such systems requires high heat extraction. Conventional air cooling based heat sinks and cold plate based liquid cooling have their own benefits for various applications but has limitations for high power density applications. The current study explores a jet impingement based direct substrate cooling system that was implemented for a SiC based direct bonded Cu substrate for various power losses. Numerical comparison between jet impingement cooling and conventional horizontal/indirect cooling (pin fin heat sink and genetic algorithm-optimized heat sink) showed that the area weighted average of the heat transfer coefficient (HTC) is high for both horizontal cooling designs, and the local HTC is higher for jet impingement. Design iterations were undertaken to resolve the bottleneck of this cooling system. Increasing the number of nozzles helped to cover more area at the direct bonded Cu bottom plate, which drops the chip temperature considerably. With a constant flow rate, increasing the number of nozzles would decrease local jet velocity, which reduces the heat extraction by jet impingement. This issue can be addressed by reducing the diameter of nozzle but doing so results in a high pressure drop where the design constraint is 2 psi. A flared nozzle design is proposed, which has a higher spreading angle of the jet that increases the flow coverage and reduces the pressure drop of the coolant loop.

Barua, Himel↗

Genetic Algorithm for Optimization of Neural Networks for Bayesian Inference of Model Uncertainty

The objective of this work was to develop a genetic optimization algorithm that can design a neural network capable of producing uncertainty estimates along with predictions. This algorithm is necessary because the inclusion of uncertainty modeling in a neural network greatly complicates the network’s design space, making the development of a converging model extremely difficult and time consuming. The genetic algorithm presented in this work uses a number of value ranges for various configurable neural network parameters to create a randomly generated population of network architectures. The initially generated population is then evolved over the course of several generations, with the best performing models breeding to produce novel network configurations. Mutations are randomly applied to the network designs to facilitate the development of adaptations beneficial to the task being performed. An experiment was conducted to validate the proposed algorithm, in which the genetic optimizer was tasked with producing a neural network capable of predicting the sound pressure level (SPL) resulting from jet-surface interaction (JSI) noise. The data used for this task was generated at the NASA Glenn Research Center in the Aero-Acoustic Propulsion Laboratory. Starting with an initial population size of 35 randomly generated networks, and evolved over the course of 10 generations, the genetic algorithm produced a design able to predict SPL as a result of JSI noise within 0.272 dB, on average.

Genetic algorithm↗

Measurement of the ratio $B(t \to W b)/B(t \to W q)$ in $t\bar{t}$ dilepton channel at CDF

My analysis is based on the number of b-jets found in t¯t events using the dilepton sample with at least 2 jets in the final state. The charged leptons could be either electrons or muons. Tau leptons are not included. We use SecVtx algorithm, based on the reconstruction of a secondary vertex in the event, in order to identify a jet coming from b-quark fragmentation (b-tagging). Due to the high purity of the t¯t signal in dilepton events it is possible to perform a kinematic measurement of the t¯t cross section. Our strategy is to use this result to make prediction on the number of t¯t events. We divide our sample in subsets according to dilepton type (combination of the lepton type), number of jets in the final states and events with zero, one or two tags. The comparison between events and the prediction, given by the sum of the expected t¯t estimate and the background yield, in each subsample is made using a Likelihood function. Our measured value for R is the one which maximizes the Likelihood, i.e. gives the best match between our expectation and the observed data. We measure: p¯p!t¯t = 7.05±0.53stat±0.42lumi , R= 0.86±0.06 (stat+syst) and, in the hypothesis of CKM matrix unitarity with three quark generations, | Vtb | = 0.93 ± 0.03. Our analysis on the p¯p!t¯t was performed independently of the official dilepton analisys on the t¯t production cross section. So it represents also a valuable crosscheck for the official analysis. In chapter 1, a brief introduction to the theoretical framework is given. The standard model of elementary particles and the Quantum Cromodynamic theories are introduced. Then the top quark is presented, with a short descpription of its properties, as its mass, its production mode and its cross section. Some previous results on R are listed as well. Later we present the experiment that collected our data, both the collider (chapter 2) and the detector (CDF)(chapter 3). In chapter 4 we describe the physics object reconstruction, so how we collect the detector signals and translate those into physical particles traversing our detector. The event selection is described in chapter 5, where we report the complete list of the selection requirements and we estimate our sample composition. In chapters 6 and 7 we report our results for the t¯t production cross section and R. An indirect measurement for |Vtb| is given as well.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Development of Spectral and Atomic Models for Diagnosing Energetic Particle Characteristics in Fast Ignition Experiments

This Final Report summarizes work performed under DOE STTR Phase II Grant No. DE-FG02-05ER86258 during the project period from August 2006 to August 2009. The project, “Development of Spectral and Atomic Models for Diagnosing Energetic Particle Characteristics in Fast Ignition Experiments,” was led by Prism Computational Sciences (Madison, WI), and involved collaboration with subcontractors University of Nevada-Reno and Voss Scientific (Albuquerque, NM). In this project, we have: Developed and implemented a multi-dimensional, multi-frequency radiation transport model in the LSP hybrid fluid-PIC (particle-in-cell) code [1,2]. Updated the LSP code to support the use of accurate equation-of-state (EOS) tables generated by Prism’s PROPACEOS [3] code to compute more accurate temperatures in high energy density physics (HEDP) plasmas. Updated LSP to support the use of Prism’s multi-frequency opacity tables. Generated equation of state and opacity data for LSP simulations for several materials being used in plasma jet experimental studies. Developed and implemented parallel processing techniques for the radiation physics algorithms in LSP. Benchmarked the new radiation transport and radiation physics algorithms in LSP and compared simulation results with analytic solutions and results from numerical radiation-hydrodynamics calculations. Performed simulations using Prism radiation physics codes to address issues related to radiative cooling and ionization dynamics in plasma jet experiments. Performed simulations to study the effects of radiation transport and radiation losses due to electrode contaminants in plasma jet experiments. Updated the LSP code to generate output using NetCDF to provide a better, more flexible interface to SPECT3D [4] in order to post-process LSP output. Updated the SPECT3D code to better support the post-processing of large-scale 2-D and 3-D datasets generated by simulation codes such as LSP. Updated atomic physics modeling to provide for more comprehensive and accurate atomic databases that feed into the radiation physics modeling (spectral simulations and opacity tables). Developed polarization spectroscopy modeling techniques suitable for diagnosing energetic particle characteristics in HEDP experiments. A description of these items is provided in this report. The above efforts lay the groundwork for utilizing the LSP and SPECT3D codes in providing simulation support for DOE-sponsored HEDP experiments, such as plasma jet and fast ignition physics experiments. We believe that taken together, the LSP and SPECT3D codes have unique capabilities for advancing our understanding of the physics of these HEDP plasmas. Based on conversations early in this project with our DOE program manager, Dr. Francis Thio, our efforts emphasized developing radiation physics and atomic modeling capabilities that can be utilized in the LSP PIC code, and performing radiation physics studies for plasma jets. A relatively minor component focused on the development of methods to diagnose energetic particle characteristics in short-pulse laser experiments related to fast ignition physics. The period of performance for the grant was extended by one year to August 2009 with a one-year no-cost extension, at the request of subcontractor University of Nevada-Reno.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Event structure and double helicity asymmetry in jet production from polarized p+p collisions at (sq rt) s = 200 GeV

We report on the event structure and double helicity asymmetry (A{sub LL}) of jet production in longitudinally polarized p+p collisions at {radical}s = 200 GeV. Photons and charged particles were measured by the PHENIX experiment at midrapidity |{eta}| < 0.35 with the requirement of a high-momentum (> 2 GeV/c) photon in the event. Event structure, such as multiplicity, p{sub T} density and thrust in the PHENIX acceptance, were measured and compared with the results from the pythia event generator and the geant detector simulation. The shape of jets and the underlying event were well reproduced at this collision energy. For the measurement of jet ALL, photons and charged particles were clustered with a seed-cone algorithm to obtain the cluster p{sub T} sum (p{sub T}{sup reco}). The effect of detector response and the underlying events on p{sub T}{sup reco} was evaluated with the simulation. The production rate of reconstructed jets is satisfactorily reproduced with the next-to-leading-order and perturbative quantum chromodynamics jet production cross section. For 4 < p{sub T}{sup reco} < 12 GeV/c with an average beam polarization of <P> = 49% we measured A{sub LL} = -0.0014 {+-} 0.0037{sup stat} at the lowest p{sub T}{sup reco} bin (4-5 GeV/c) and -0.0181 {+-} 0.0282{sup stat} at the highest p{sub T}{sup reco} bin (10-12 GeV/c) with a beam polarization scale error of 9.4% and a p{sub T} scale error of 10%. Jets in the measured p{sub T}{sup reco} range arise primarily from hard-scattered gluons with momentum fraction 0.02 < x < 0.3 according to pythia. The measured A{sub LL} is compared with predictions that assume various {Delta}G(x) distributions based on the Gluck-Reya-Stratmann-Vogelsang parameterization. The present result imposes the limit -1.1 < {integral}{sub 0.02}{sup 0.3}dx{Delta}G(x,{mu}{sup 2} = 1 GeV{sup 2}) < 0.4 at 95% confidence level or {integral}{sub 0.02}{sup 0.3}dx{Delta}G(x,{mu}2 = 1 GeV{sup 2}) < 0.5 at 99% confidence level.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Jet-hadron correlations with respect to the event plane in $\sqrt{s_{NN}}$ = 200 GeV Au + Au collisions in STAR

Angular distributions of charged particles relative to jet axes are studied in $\sqrt{s_{NN}}$ = 200 GeV Au+Au collisions as a function of the jet orientation with respect to the event plane. This differential study tests the expected path-length dependence of energy loss experienced by a hard-scattered parton as it traverses the hot and dense medium formed in heavy-ion collisions. A second-order event plane is used in the analysis as an experimental estimate of the reaction plane formed by the collision impact parameter and the beam direction. Charged-particle jets with 15 < 𝑝 T,jet < 20 and 20 < 𝑝 T,jet < 40 ⁢GeV/𝑐 were reconstructed with the anti-𝑘 T algorithm with radius parameter setting of 𝑅 = 0.4 in the 20–50% centrality bin to maximize the initial-state eccentricity of the interaction region. The reaction plane fit method is implemented to remove the flow-modulated background with better precision than prior methods. Yields and widths of jet-associated charged-hadron distributions are extracted in three angular bins between the jet axis and the event plane. The event-plane (EP) dependence is further quantified by ratios of the associated yields in different EP bins. No dependence on orientation of the jet axis with respect to the event plane is seen within the uncertainties in the kinematic regime studied. This finding is consistent with a similar experimental observation by ALICE in $\sqrt{s_{NN}}$ = 2.76 TeV Pb-Pb collision data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evolution of the bounded magnetized jet and comparison with Helimak experiments

Magnetized jets are important features of many systems of physical interest. To date, most interest has focused on solar and space physics and astrophysical applications, and hence the unbounded magnetized jet, and its cousin, the unbounded magnetized wake, have received the most attention. This work presents calculations of a bounded, magnetized jet for a laboratory experiments in the Helimak device [K. W. Gentle and H. He, Plasma Sci. Technol. 10, 284 (2008)]. The Helimak device has a toroidal magnetic field with a controlled velocity flow that represents jets in bounded systems. Experimental and theoretical features include three spatial dimensions, the inclusion of resistivity and viscosity, and the presence of no-slip walls. The results of the linearized model are computed with a Chebyshev-{tau} algorithm. The bounding walls stabilize the ideal varicose mode found in unbounded magnetized jets. The ideal sinuous mode persists in the bounded system. A comparison theorem is proved showing that two-dimensional modes are more unstable than the corresponding three-dimensional modes for any given set of system parameters. This result is a generalization of the hydrodynamic Squires theorem. An energy-stress theorem indicates that the Maxwell stress is crucial for the growth of the instability. The results of the analysis are consistent with the observed plasma fluctuations with in the limits of using a simple model for the more complex measured jet velocity flow profile. The working gas is singly ionized argon and the jet velocity profile is accurately measured with Doppler shift spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Formation and inflammation of a turbulent jet

The formation and inflammation of a planar, turbulent jet in an incompressible medium is modeled numerically by the use of the random vortex method amended by a flame propagation algorithm. The results demonstrate the dominant influence of turbulent eddies and their interactions upon the development of the jet. Its growth is shown to consist of three stages: formation of small eddies, pairing of eddies with the same sign of circulation, and pairing of eddies of opposite signs. On this basis a number of features of the jet mechanism are revealed, namely penetration, engulfment, entrainment, and intermittency. Two cases of inflammation are considered. In one, the jet is ignited at the center of the orifice, the solution tracing its own inflammation. In the other, combustion is initiated across its full cross section, the results modeling the action of a turbulent torch as it spreads the flame into the combustible surroundings. In both cases the flow field is still dominated by the turbulent eddies and their interactions. However, the coherence among them is encumbered as a consequence of expansion due to the exothermicity of the combustion process.

Ghoniem, A. F.↗