Search NASA⌕ Search

SEARCH · Search NASA

Results for “leaf area index”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Canopy architecture of a walnut orchard

A detailed dataset describing the canopy geometry of a walnut orchard was acquired to support testing and comparison of the predictions of canopy microwave and optical inversion models. Measured canopy properties included the quantity, size, and orientation of stems, leaves, and fruit. Eight trees receiving 100 percent of estimated potential evapotranspiration water use and eight trees receiving 33 percent of potential water use were measured. The vertical distributions of stem, leaf, and fruit properties are presented with respect to irrigation treatment. Zenith and probability distributions for stems and leaf normals are presented. These data show that, after two years of reduced irrigation, the trees receiving only 33 percent of their potential water requirement had reduced fruit yields, lower leaf area index, and altered allocation of biomass within the canopy.

Ustin, Susan L.↗

Calculated sensitivities of several optical radiometric indices for vegetation canopies

The present study employs a radiative transfer model for a vegetation canopy to compute several quantities used in remote sensing applications and to determine the sensitivity of these radiometric quantities to several of the important problem parameters. Attention is given to the ratio of near IR to visible reflected intensities in the nadir direction, the ratio of the fraction of incident energy reflected in the near IR to that in the visible, the normalized difference between the near IR and visible nadir-reflected intensities, and the visible intensity transmitted in a given downward direction. A realistic radiative transfer model is proposed for calculating these radiometric quantities. With these models, the sensitivity of the reflected and transmitted quantities to various canopy and illumination conditions are then determined. The sensitivity of the calculated quantities are presented as a function of the leaf area index of the canopy, and, for the reflected quantities, also as a function of the fraction of visible light absorbed in the canopy.

Shultis, J. K.↗

Seasonal LAI in slash pine estimated with Landsat TM

The leaf area index (LAI, total area of leaves per unit area of ground) of most forest canopies varies throughout the year, yet for logistical reasons it is difficult to estimate anything more detailed than a seasonal maximum LAI. To determine if remotely sensed data can be used to estimate LAI seasonally, field measurements of LAI were compared to normalized difference vegetation index (NDVI) values derived using Lnandsat Thematic Mapper (TM) data, for 16 fertilized and control slash pine plots on 3 dates. Linear relationships existed between NDVI and LAI with R (sup 2) values of 0.35, 0.75, and 0.86 for February 1988, September 1988, and March, 1989, respectively. This is the first reported study in which NDVI is related to forest LAI recorded during the month of sensor overpass. Predictive relationships based on data from eight of the plots were used to estimate the LAI of the other eight plots with a root-mean-square error of 0.74 LAI, which is 15.6 percent of the mean LAI. This demonstrates the potential use of Landsat TM data for studying seasonal dynamics in forest canopies.

Curran, Paul J.↗

Carbon dioxide budget in a temperature grassland ecosystem

Eddy correlation measurements of CO2 flux made during May-October 1987 and June-August 1989 were employed, in conjunction with simulated data, to examine the net exchange of CO2 in a temperature grassland ecosystem. Simulated estimates of CO2 uptake were used when flux measurements were not available. These estimates were based on daily intercepted photosynthetically active radiation, air temperature, and extractable soil water. Soil CO2 flux and dark respiration of the aerial part of plants were estimated using the relationships developed by Norman et al. (1992) and Polley et al. (1992) at the study site. The results indicate that the CO2 exchange between this ecosystem and the atmosphere is highly variable. The net ecosystem CO2 exchange reached its peak value (12-18 g/sq m d) during the period when the leaf area index was maximum. Drought, a frequent occurrence in this region, can change this ecosystem from a sink to a source for atmospheric CO2. Comparison with data on dry matter indicated that the aboveground biomass accounted for about 45-70 percent of the net carbon uptake, suggesting the importance of the below ground biomass in estimating net primary productivity in this ecosystem.

Kim, Joon↗

Shinnery oak bidirectional reflectance properties and canopy model inversion

Field measurements are presented, together with the results of a 3D canopy-model inversion for sand shinnery oak community in western Texas. The spectral bidirectional radiance measurements were in three spectral channels encompassing both the complete land surface and sky hemispheres. The changes in canopy reflectance that occur with variations in solar zenith angle and view direction for two seasons of the year were evaluated, and the 3D radiation-interaction model was inverted to estimate the oak leaf area index and canopy density from the reflectance data.

Deering, Donald W.↗

Leaf Areas And Spectral Properties Of Slash Pine

NASA technical memorandum describes experiments to test feasibility of estimating seasonal leaf areas of forest canopies from spectral radiances measured by remote instruments. Accurate estimates of seasonal leaf areas of forests necessary for studies of seasonal exchanges of energy between forest canopies and atmosphere. Potential use of remote sensing in estimating seasonal changes in leaf area index (LAI).

Curran, Paul J.↗

Botswana water and surface energy balance research program. Part 1: Integrated approach and field campaign results

The Botswana water and surface energy balance research program was developed to study and evaluate the integrated use of multispectral satellite remote sensing for monitoring the hydrological status of the Earth's surface. Results of the first part of the program (Botswana 1) which ran from 1 Jan. 1988 - 31 Dec. 1990 are summarized. Botswana 1 consisted of two major, mutually related components: a surface energy balance modeling component, built around an extensive field campaign; and a passive microwave research component which consisted of a retrospective study of large scale moisture conditions and Nimbus scanning multichannel microwave radiometer microwave signatures. The integrated approach of both components in general are described and activities performed during the surface energy modeling component including the extensive field campaign are summarized. The results of the passive microwave component are summarized. The key of the field campaign was a multilevel approach, whereby measurements by various similar sensors were made at several altitudes and resolution. Data collection was performed at two adjacent sites of contrasting surface character. The following measurements were made: micrometeorological measurements, surface temperatures, soil temperatures, soil moisture, vegetation (leaf area index and biomass), satellite data, aircraft data, atmospheric soundings, stomatal resistance, and surface emissivity.

Vandegriend, A. A.↗

Comparison of surface fluxes and conductances at two contrasting sites within the FIFE area

Surface flux measurements from two contrasting sites within the FIFE study area are analyzed. The seasonal variation of midday latent heat fluxes and surface conductances at the two sites was found to be very similar even though the ratio of their average total leaf area indices was greater than two to one. Concurrent measurements made at another six flat sites within the FIFE area confirmed the independence of latent heat flux with respect to leaf area index. The surface conductance stress function related to specific humidity deficit was the same for the two sites, whereas the solar radiation stress function showed a difference of 30 percent at a solar radiation input of 300 W/sq m and the soil moisture stress function showed a difference of 16 percent when half the extractable soil moisture had been taken up. However, when the stress functions were combined to determine the surface conductance, these differences virtually canceled out.

Stewart, J. B.↗

Soil surface CO2 fluxes and the carbon budget of a grassland

Measurements of soil surface CO2 fluxes are reported for three sites within the First International Satellite Land Surface Climatology Project (ISLSCP) Field Experiment (FIFE) area, and simple empirical equations are fit to the data to provide predictions of soil fluxes from environmental observations. A prototype soil chamber, used to make the flux measurements, is described and tested by comparing CO2 flux measurements to a 40-L chamber, a 1-m/cu chamber, and eddy correlation. Results suggest that flux measurements with the prototype chamber are consistent with measurements by other methods to within about 20 percent. A simple empirical equation based on 10-cm soil temperature, 0- to 10-cm soil volumetric water content, and leaf area index predicts the soil surface CO2 flux with a rms error of 1.2 micro-mol sq m/s for all three sites. Further evidence supports using this equation to evaluate soil surface CO2 during the 1987 FIFE experiment. The soil surface CO2 fluxes when averaged over 24 hours are comparable to daily gross canopy photosynthetic rates. For 6 days of data the net daily accumulation of carbon is about 0.6 g CO2 sq m/d; this is only a few percent of the daily gross accumulation of carbon by photosynthesis. As the soil became drier in 1989, the net accumulation of carbon by the prairie increased, suggesting that the soil flux is more sensitive to temperature and drought than the photosynthetic fluxes.

Norman, J. M.↗

Estimation of surface heat and moisture fluxes over a prairie grassland. IV - Impact of satellite remote sensing of slow canopy variables on performance of a hybrid biosphere model

Numerical experiments are conducted using the Ex-BATS model of Crosson and Weng (1993), which is an adaptation the Dickinson (1983, 1984) and Dickinson et al. (1986) biosphere model BATS. The purpose of these experiments is the assessment of the Ex-BATS performance when using remotely sensed data for the estimation of three key canopy variables retrieved from NOAA-AVHRR measurements: the total surface albedo, the leaf area index (LAI), and the nondiurnally varying component of stomatal resistance, r(s). The results of the simulations, which cover the entire FIFE 1987 time period, show that the satellite retrievals of r(s) are only 20 to 30 percent less accurate than the idealized results of the control experiment. The performance of the model which used satellite retrieval of the surface albedo and LAI was essentially equivalent to the hypothetical version.

Crosson, William L.↗

LAI inversion from optical reflectance using a neural network trained with a multiple scattering model

The inversion of the leaf area index (LAI) canopy parameter from optical spectral reflectance measurements is obtained using a backpropagation artificial neural network trained using input-output pairs generated by a multiple scattering reflectance model. The problem of LAI estimation over sparse canopies (LAI < 1.0) with varying soil reflectance backgrounds is particularly difficult. Standard multiple regression methods applied to canopies within a single homogeneous soil type yield good results but perform unacceptably when applied across soil boundaries, resulting in absolute percentage errors of >1000 percent for low LAI. Minimization methods applied to merit functions constructed from differences between measured reflectances and predicted reflectances using multiple-scattering models are unacceptably sensitive to a good initial guess for the desired parameter. In contrast, the neural network reported generally yields absolute percentage errors of <30 percent when weighting coefficients trained on one soil type were applied to predicted canopy reflectance at a different soil background.

Smith, James A.↗

Radar measurement of forested areas during OTTER

To test a forest ecosystem model in the OTTER (Oregon ecosystem research) project, it is desirable to find forest canopy parameters via radar remote sensing measurements. Conventionally, forest biomass, along with quantities such as the leaf area index, drive the model. It is shown that the radar backscatter is not uniquely related to biomass. A sensitivity study is carried out using a forward scattering model to determine the variation of radar cross section as a function of several forest parameters. The results are used to find suitable quantities to recover via radar experiments. A parameter estimation scheme is developed to calculate some preliminary statistical properties of the forest.

Moghaddam, M.↗

A simple bidirectional-reflectance model applied to a tallgrass canopy

The present bidirectional reflectance model is used to simulate spectral reflectance direction-changes in a tallgrass canopy; comparisons with field measurements show generally good agreement. An examination of the effects of 'hot spot' and soil-reflection inhomogeneous canopy characteristics indicates that both modeled and observed reflectances are strongly backscattered in the red band, but there is a more symmetric back/forward-scattering distribution in the near-IR. Modeled simulations for three leaf-angle distributions show that hemispherical reflectance errors could be reduced at an optimal solar zenith angle having the same magnitude for the three leaf-angle distributions, but decreasing with increasing canopy leaf-area index.

Gao, W.↗

Radar response of vegetation: An overview

This document contains a number of viewgraphs on surface and vegetation backscattering. A classification of vegetation based on general scattering properties is presented. Radar scattering mechanisms are discussed, and backscattering and reflection coefficients for soil back scattering models are given. Radar response to vegetation is presented, with the objectives to discriminate and classify vegetation; to estimate biomass, leaf area index (LAI), and soil moisture; and to monitor changes, including deforestation and growth. Both theory and observation (laboratory, field, air SAR, and European Remote Sensing Satellite (ERS-1) observations) are used to present backscatter coefficients and other data for various vegetation types. ERS-1 results include class statistics, comparison with theory, and biomass response and seasonal variation (LAI) for deciduous and coniferous forests.

Ulaby, Fawwaz T.↗

Classification of simple vegetation types using POLSAR image data

Mapping basic vegetation or land cover types is a fairly common problem in remote sensing. Knowledge of the land cover type is a key input to algorithms which estimate geophysical parameters, such as soil moisture, surface roughness, leaf area index or biomass from remotely sensed data. In an earlier paper, an algorithm for fitting a simple three-component scattering model to POLSAR data was presented. The algorithm yielded estimates for surface scatter, double-bounce scatter and volume scatter for each pixel in a POLSAR image data set. In this paper, we show how the relative levels of each of the three components can be used as inputs to simple classifier for vegetation type. Vegetation classes include no vegetation cover (e.g. bare soil or desert), low vegetation cover (e.g. grassland), moderate vegetation cover (e.g. fully developed crops), forest and urban areas. Implementation of the approach requires estimates for the three components from all three frequencies available using the NASA/JPL AIRSAR, i.e. C-, L- and P-bands. The research described in this paper was carried out by the Jet Propulsion Laboratory, California Institute of Technology under a contract with the National Aeronautics and Space Administration.

Freeman, A.↗

Session on coupled land surface/hydrological/atmospheric models

The current model capabilities in the context of land surface interactions with the atmosphere include only one-dimensional characteristics of vegetation and soil surface heat, moisture, momentum, and selected other trace gas fluxes (e.g., CO2). The influence of spatially coherent fluxes that result from landscape heterogeneity were not included. Valuable representations of several aspects of the landscape pattern currently exist. These include digital elevation data and measures of the leaf area index (i.e., Normalized Difference Vegetation Index (NDVI) from Advanced Very High Resolution Radiometer (AVHRR) data). A major deficiency, however, is the lack of an ability to sample spatially representative shallow and (especially) deep soil moisture. Numerous mesoscale modeling and observed studies demonstrated the sensitivity of planetary boundary layer structure and deep convection to the magnitude of the surface moisture flux.

Pielke, Roger↗

VEG: An intelligent workbench for analysing spectral reflectance data

An Intelligent Workbench (VEG) was developed for the systematic study of remotely sensed optical data from vegetation. A goal of the remote sensing community is to infer the physical and biological properties of vegetation cover (e.g. cover type, hemispherical reflectance, ground cover, leaf area index, biomass, and photosynthetic capacity) using directional spectral data. VEG collects together, in a common format, techniques previously available from many different sources in a variety of formats. The decision as to when a particular technique should be applied is nonalgorithmic and requires expert knowledge. VEG has codified this expert knowledge into a rule-based decision component for determining which technique to use. VEG provides a comprehensive interface that makes applying the techniques simple and aids a researcher in developing and testing new techniques. VEG also provides a classification algorithm that can learn new classes of surface features. The learning system uses the database of historical cover types to learn class descriptions of one or more classes of cover types.

Harrison, P. Ann↗

Synergy between optical and microwave remote sensing to derive soil and vegetation parameters from MAC Europe 1991 Experiment

The ability of remote sensing for monitoring vegetation density and soil moisture for agricultural applications is extensively studied. In optical bands, vegetation indices (NDVI, WDVI) in visible and near infrared reflectances are related to biophysical quantities as the leaf area index, the biomass. In active microwave bands, the quantitative assessment of crop parameters and soil moisture over agricultural areas by radar multiconfiguration algorithms remains prospective. Furthermore the main results are mostly validated on small test sites, but have still to be demonstrated in an operational way at a regional scale. In this study, a large data set of radar backscattering has been achieved at a regional scale on a French pilot watershed, the Orgeval, along two growing seasons in 1988 and 1989 (mainly wheat and corn). The radar backscattering was provided by the airborne scatterometer ERASME, designed at CRPE, (C and X bands and HH and VV polarizations). Empirical relationships to estimate water crop and soil moisture over wheat in CHH band under actual field conditions and at a watershed scale are investigated. Therefore, the algorithms developed in CHH band are applied for mapping the surface conditions over wheat fields using the AIRSAR and TMS images collected during the MAC EUROPE 1991 experiment. The synergy between optical and microwave bands is analyzed.

Taconet, O.↗