Search NASA⌕ Search

SEARCH · Search NASA

Results for “methane production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Investigation of the Mechanisms Underpinning Plasma-Catalyst Interaction for the Conversion of Methane to Oxygenates

Plasma catalysis is a promising approach to further enhance the conversion of methane into value-added products such as methanol. In this work, the mechanisms enabling the conversion of methane to CO, CO 2 and methanol enabled by plasma-enhanced catalysis were investigated. A catalyst reactor was incorporated downstream of the plasma jet to enable the separation between plasma generation and the catalyst bed. An enhancement in CH 3 OH and CO 2 production was observed for the shortest distance between the plasma and catalyst compared to the plasma-only case. Plasma-enabled gas heating was shown not to be responsible for the observed synergy while a gas temperature increase as low as 30-40 K significantly impacted desorption rates of CH 3 OH/C 2 H 5 OH on alumina particles. Correlations between molecular beam mass spectrometry (MBMS) measurements at the inlet and outlet of the catalytic reactor suggest that the observed synergistic effect was caused by radical species most likely the CH 3 O 2 radical. As a result, this study shows that surface reactions induced by radicals such as alkylperoxy radicals might play an important role in surface reactions in plasma-catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic Studies of a Primitive Homolog of Nitrogenase Involved in Coenzyme F430 Biosynthesis (Final Report)

Methyl-coenzyme M reductase (MCR) is the key enzyme in the biological formation and anaerobic oxidation of methane (AOM). Methane is a potent greenhouse gas and the major component of natural gas. Given the abundance of natural gas reserves in remote areas, there is great current interest in a scalable bio-based process for the conversion of methane to liquid fuel and other high-value chemicals. MCR holds much promise for use in such a methane bioconversion strategy. However, MCR cannot currently be produced in an active form in a heterologous host, due in large part to the lack of genetic and biochemical information about the production of holo MCR. In an effort to overcome this deficiency, our laboratory recently elucidated the biosynthetic pathway of the unique nickel-containing coenzyme of MCR, F430. The key step in coenzyme F430 biosynthesis (Cfb) was found to involve an unprecedented reductive cyclization reaction. This remarkable transformation, which involves a 6-electron reduction, the formation of a γ-lactam ring, and the generation of 7 stereocenters, is catalyzed by a primitive homolog of nitrogenase (CfbCD). Nitrogenase is a two-component metalloenzyme that catalyzes the adenosine triphosphate (ATP)-dependent reduction of dinitrogen to ammonia (nitrogen fixation). Homologs of nitrogenase are also involved in the biosynthesis of the photosynthetic pigments chlorophyll and bacteriochlorophyll. Phylogenetic analysis of the CfbCD complex suggests that it is representative of a more ancient lineage of the nitrogenase superfamily, and a thorough investigation of its structure and function is likely to shed light on the mechanisms and evolution of these important metalloenzymes. Moreover, a detailed understanding of the mechanism of the CfbCD complex may aid in the development of specific inhibitors to help reduce natural greenhouse gas emissions and can be exploited for the heterologous production of MCR for methane bioconversion. Towards these goals, specific aims were pursued for the 1) identification of physiological electron donors and in vivo coenzyme F430 synthesis, 2) analysis of the iron sulfur centers, structure, and oligomerization state changes, and 3) characterization of transient intermediates and the intercomponent electron transfer.

03 NATURAL GAS↗
NASA NTRS2016

Hydrogen Purification and Recycling for an Integrated Oxygen Recovery System Architecture

The United States Atmosphere Revitalization life support system on the International Space Station (ISS) performs several services for the crew including oxygen generation, trace contaminant control, carbon dioxide (CO2) removal, and oxygen recovery. Oxygen recovery is performed using a Sabatier reactor developed by Hamilton Sundstrand, wherein CO2 is reduced with hydrogen in a catalytic reactor to produce methane and water. The water product is purified in the Water Purification Assembly and recycled to the Oxygen Generation Assembly (OGA) to provide O2 to the crew. This architecture results in a theoretical maximum oxygen recovery from CO2 of approximately 54% due to the loss of reactant hydrogen in Sabatier-produced methane that is currently vented outside of ISS. Plasma Methane Pyrolysis technology (PPA), developed by Umpqua Research Company, provides the capability to further close the Atmosphere Revitalization oxygen loop by recovering hydrogen from Sabatier-produced methane. A key aspect of this technology approach is to purify the hydrogen from the PPA product stream which includes acetylene, unreacted methane and byproduct water and carbon monoxide. In 2015, four sub-scale hydrogen separation systems were delivered to NASA for evaluation. These included two electrolysis single-cell hydrogen purification cell stacks developed by Sustainable Innovations, LLC, a sorbent-based hydrogen purification unit using microwave power for sorbent regeneration developed by Umpqua Research Company, and a LaNi4.6Sn0.4 metal hydride produced by Hydrogen Consultants, Inc. Here we report the results of these evaluations, discuss potential architecture options, and propose future work.

Abney, Morgan B.↗
NASA NTRS2018

Dust Mitigation on Mars Using an Electrostatic Precipitator

The Martian atmosphere contains large amounts of dust, which are lofted by dust devils and dust storms. Some of this dust, particles on the order of 2-4 m, never settle and are constantly present in the atmosphere. Therefore, in order to utilize the planet's atmosphere for production of consumables, like oxygen and methane, this dust must be removed before the commodity production can begin. The electrostatic precipitator is currently being studied at Kennedy Space Center as a realistic option for removing this dust. This project covers the results, to date, of the dust flow initiation, control, and analysis inside the electrostatic precipitator, which is to be modelled after various dusty Martian atmospheric conditions.

electrostatic precipitator↗
NASA NTRS2016

Hydrogen Purification and Recycling for an Integrated Oxygen Recovery System Architecture

The United States Atmosphere Revitalization life support system on the International Space Station (ISS) performs several services for the crew including oxygen generation, trace contaminant control, carbon dioxide (CO2) removal, and oxygen recovery. Oxygen recovery is performed using a Sabatier reactor developed by Hamilton Sundstrand, wherein CO2 is reduced with hydrogen in a catalytic reactor to produce methane and water. The water product is purified in the Water Purification Assembly and recycled to the Oxygen Generation Assembly (OGA) to provide O2 to the crew. This architecture results in a theoretical maximum oxygen recovery from CO2 of approx.54% due to the loss of reactant hydrogen in Sabatier-produced methane that is currently vented outside of ISS. Plasma Pyrolysis Assembly (PPA) technology, developed by Umpqua Research Company, provides the capability to further close the Atmosphere Revitalization oxygen loop by recovering hydrogen from Sabatier-produced methane. A key aspect of this technology approach is the need to purify the hydrogen from the PPA product stream which includes acetylene, unreacted methane and byproduct water and carbon monoxide. In 2015, four sub-scale hydrogen separation systems were delivered to NASA for evaluation. These included two electrolysis single-cell hydrogen purification cell stacks developed by Sustainable Innovations, LLC, a sorbent-based hydrogen purification unit using microwave power for sorbent regeneration developed by Umpqua Research Company, and a LaNi4.6Sn0.4 metal hydride produced by Hydrogen Consultants, Inc. Here we report the results of these evaluations to-date, discuss potential architecture options, and propose future work.

Abney, Morgan B.↗
DOE OSTI2020

Microbial ecology and biogeochemistry of hypersaline sediments in Orca Basin

In deep ocean hypersaline basins, the combination of high salinity, unusual ionic composition and anoxic conditions represents significant challenges for microbial life. We used geochemical porewater characterization and DNA sequencing based taxonomic surveys to enable environmental and microbial characterization of anoxic hypersaline sediments and brines in the Orca Basin, the largest brine basin in the Gulf of Mexico. Full-length bacterial 16S rRNA gene clone libraries from hypersaline sediments and the overlying brine were dominated by the uncultured halophilic KB1 lineage, Deltaproteobacteria related to cultured sulfate-reducing halophilic genera, and specific lineages of heterotrophic Bacteroidetes. Archaeal clones were dominated by members of the halophilic methanogen genus Methanohalophilus, and the ammonia-oxidizing Marine Group I (MG-I) within the Thaumarchaeota. Illumina sequencing revealed higher phylum- and subphylum-level complexity, especially in lower-salinity sediments from the Orca Basin slope. Illumina and clone library surveys consistently detected MG-I Thaumarchaeota and halotolerant Deltaproteobacteria in the hypersaline anoxic sediments, but relative abundances of the KB1 lineage differed between the two sequencing methods. The stable isotopic composition of dissolved inorganic carbon and methane in porewater, and sulfate concentrations decreasing downcore indicated methanogenesis and sulfate reduction in the anoxic sediments. While anaerobic microbial processes likely occur at low rates near their maximal salinity thresholds in Orca Basin, long-term accumulation of reaction products leads to high methane concentrations and reducing conditions within the Orca Basin brine and sediments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Feasibility of Process Intensification of Water-Gas Shift Reaction Using a Microreactor with Integrated Cooling

Hydrogen is an increasingly attractive low-carbon energy carrier for a variety of stationary and mobile applications. The water-gas shift (WGS) reaction is a key processing step used for large-scale hydrogen production via the steam methane reforming process. However, the thermodynamics and kinetics of the reaction are such that standard two-stage adiabatic reactors used in these systems are large, increasing catalyst volume and cost. To intensify the process and realize the economical distributed production of hydrogen, adiabatic WGS microreactors with integrated cooling directly regulate the reaction temperature via integrated coolant channels to promote higher conversion within a smaller reactor volume. This study investigates the conversion efficiency of a single WGS microchannel operating under such cooling conditions. A COMSOL Multiphysics model is developed and validated with isothermal experimental data from the literature. The model is then used to evaluate improvements in conversion efficiency when the reaction is cooled via a specified wall temperature profile. Lastly, the model is modified to include cooling channels with a secondary fluid that can practically achieve a similar conversion profile as the specified wall temperature profile previously applied. Initial results show that reactor conversion can be significantly increased by the inclusion of appropriate cooling and that there is a potential for the recovery of energy from the reaction stream that can be used for other applications within the overall process.

energy recovery↗
NASA NTRS2003

Dynamical Study of Prebiotic Processing by Comet Impact

Comets and meteoroids that bombarded the Earth, other planets and moons are considered possible deliverers of prebiotic materials manufactured in space. Simultaneously, chemical processing can be initiated by the large kinetic energy imparted to the planetary atmosphere during comet/meteoroid entry. The efficiency of organic synthesis and the diversity of products by impact shock are known to decrease as the reducing power of the atmosphere decreases. It is generally accepted that rich organic products are produced in a methane atmosphere whereas a carbon dioxide atmosphere is reported to yield a dearth of products In order to understand the details of impact chemistry and how it depends on the atmospheric composition, we carried out simulations of the chemistry initiated by comet/meteoroid impact upon a planetary atmosphere using different atmospheric compositions. The simulations were done by solving the set of coupled equations for mass, momentum, and energy conservations, chemical kinetics, and transport, that describe a high-energy impact shock, subsequent expansion and cooling of the hot shocked gas by mixing with the ambient gas, and the eventual steady state composition.

Huo, Winifred M.↗
DOE OSTI2024

Quantifying the thermal effect and methyl radical production in nanosecond repetitively pulsed glow discharges applied to a methane-air flame

In this work, we investigated non-equilibrium plasma produced by nanosecond repetitively pulsed glow discharges applied across a lean premixed methane-air flame. The flame is stationary, axisymmetric, and laminar. The discharges are applied on the symmetry axis crossing the reactant gases, flame front, and product gases, allowing phase-locked averaged measurements and comparisons with axisymmetric numerical simulations. The thermal effect and methyl radical production are quantified in the discharge in the reactant gas region. One-dimensional, two-beam, hybrid, femtosecond-picosecond, coherent anti-Stokes Raman scattering is used to acquire spatial and temporal profiles of temperature and oxygen-to-nitrogen concentration ratio. Photo-fragmentation laser-induced fluorescence is used to acquire quantitative two-dimensional profiles of methyl radicals in the discharge providing the first quantitative imaging of methyl produced ahead of a flame by plasma-induced methane dissociation. The spatial profiles of temperature and oxygen-to-nitrogen concentration ratio are in steady state, indicating that individual discharges have an insignificant heating effect. Upper and lower bounds of the produced mole fraction of methyl radicals in the plasma are obtained due to uncertainties in the collisional quenching rates of excited state methylidyne radicals in the plasma. The discharges produce a maximum of 600–1100 ppm of methyl radicals upstream of the flame front within 25 ns. This amount is similar to the predicted methyl mole fraction for the flame without plasma and thus represents a significant chemical perturbation to the reactants upstream of the flame front. The produced methyl follows an exponential decay in the first microsecond after the discharge with a decay constant of 8 µs close to the flame, and 0.8 µs further from the flame. The decay then deviates from the exponential curve and the methyl persists for tens of microseconds. The results suggest that for the tested configuration, the thermal effect of individual discharges through fast gas heating is negligible, while active chemical species are produced in large quantities in the reactant gases, upstream of the flame front.

hybrid fs-ps CARS↗
DOE OSTI2025

Microwave-Assisted Activation of Mo/HZSM5 in Methane Dehydroaromatization

Natural gas flaring is a significant challenge for oil and gas producers. One viable option to mitigate flaring is the conversion of natural gas into valuable chemicals. Applying microwave energy to heterogenous catalyst materials offers advantages in terms of higher rates and product selectivities in comparison to traditional thermal systems which can be designed for on-demand chemical production in modular reactor systems. Methane dehydroaromatization (MDHA) produces transportable, liquid aromatic products directly from natural gas, which is ideal for remote production but is hindered by low thermodynamic yields and rapid deactivation. The stability and performance of the Mo/ZSM5 catalyst is often determined by the state and nature of Mo in the catalyst, which in turn is dictated by the temperature and gaseous environment during catalyst activation. In this study, the Mo/HZSM5 catalyst was activated under three different heating modes (thermal, microwave E-field, and microwave H-field) and four different gas environments (CO, He, CH4+H2, and H2). All the activated catalysts were characterized using different tools and performance evaluated in MDHA.

methane dehydroaromatization↗
DOE OSTI2020

Ethylene yield in oxidative dehydrogenation of ethane and ethane containing hydrocarbon mixtures

Methods and systems are provided for oxidative dehydrogenation of a hydrocarbon feed stream to produce a product stream with improved ethylene yield. The methods can include the steps of (i) combining a recycle stream with the feed stream to form a reactor feed stream, (ii) contacting the reactor feed stream with an oxide-based redox catalyst to produce the product stream comprising ethylene and one or more byproducts selected from the group consisting of methane, ethane, other byproducts, and mixtures thereof, and (iii) removing all or a part of the methane and ethane from the product stream to produce the recycle stream. Systems for the oxidative dehydrogenation (ODH) of a hydrocarbon feed stream are also provided to produce a product stream with improved ethylene yield. The systems and methods can include an oxide-based redox catalyst, such as Mg6MnO8, Cu6PbO8, and Ni6MnO8.

03 NATURAL GAS↗
DOE OSTI2025

A review on advances in oxidative coupling of methane (OCM) for industrial use and prospects of CO 2 –H 2 O splitting integration

The discovery of shale gas reserves has encouraged the development of direct methods for methane conversion into valuable chemicals, offering an alternative to indirect approaches that involve an energy-intensive and intermittent syngas production step, leading to high CO 2 emissions. Amongst the direct methods, the oxidative coupling of methane (OCM) is a potential pathway to reduce CO 2 emissions and can produce commodity chemicals such as ethylene, a chemical regarded as central to the petrochemical industry. Even though OCM has been studied for over four decades, the technology still has not found commercial application. Amongst the challenges regarding industrial deployment of OCM, the most significant one is the requirement of a high ethylene yield of 30 % which is currently reported to be around 20 %. Moreover, the highly exothermic nature of the process and controlling the carbon selectivity over oxides of carbon (COx) is the heart of the problem. Numerous researchers have presented promising results in terms of catalysts, reactor designs and feeding strategies for OCM. However, due to lack of inclusiveness in the results, none of the combination of catalysts, reactors and system optimizations has been able to bring about its industrial viability. The current paper presents an extensive review of the noteworthy attempts to achieve industrial targets for OCM. Moreover, a comprehensive criteria is presented which highlights the desired end state for the industrial deployment of OCM technology. Furthermore, the criteria is based on literature survey and a comparison with industrially deployed ethylene production plants i.e., naphtha or ethane steam cracker plants. Finally, a novel integration technology is presented which includes a combination of OCM and CO 2 -H 2 O splitting in a chemical looping reactor design to enable efficient energy utilization and minimal heat losses to the environment.

CO2 Splitting↗
DOE OSTI2023

Investigation of methane mass transfer and sorption in Marcellus shale under variable net-stress

Natural gas in shale exists as free and adsorbed gas, subject to prevailing pore pressures and stress conditions. Accordingly, to accurately estimate/predict the shale gas recovery potential, a central requirement is to represent gas transport and sorption behavior under varying stress conditions. The objective of this work is to facilitate the interpretation of laboratory-scale experiments, at relevant conditions, in an attempt to bridge the gap in scales between laboratory- and field-scale observations. We have conducted a series of high-pressure experiments on a full-diameter core sample from the Marcellus shale. These include gas loading (pressure-decay) and depletion (production) experiments with pure methane (CH 4 ) at variable stress conditions to characterize transport and sorption behavior under reservoir-relevant conditions. Here we have formulated and applied a novel integral model for mass transfer and storage in multi-porosity shale systems that allows us to effectively investigate transport and sorption phenomena: We delineate gas transport by interpreting helium (He) pressure-decay experiments and demonstrate how to use the information gained to calculate the relevant transport coefficients of CH 4 and other gases. A separate measurement of the CH 4 sorption isotherm on a smaller sample (a shale cube) was interpreted and combined with the transport description to predict the production behavior of CH 4 from the experiments with the full-diameter core. Our experiments demonstrate that the representation of sorption hysteresis is crucial for predicting and guiding shale gas production: At the end of both gas production experiments, approximately 20% of the initial gas in place remained in the core. Without accounting for sorption hysteresis, our modeling demonstrates that the CH 4 production could be overestimated by 10%. We demonstrate that our integral, triple-porosity model provides an effective approach for the interpretation and prediction of gas transport and sorption behavior during loading and production experiments on shale cores under variable net-stress conditions. In summary, our work combines measurements and modeling of mass transfer and sorption in shales at different scales to validate a characterization approach that facilitates an improved understanding of shale gas production. Furthermore, the triple-porosity model utilized in our work defines a potential pathway for the translation of laboratory-scale experimentation to larger-scale applications.

58 GEOSCIENCES↗
DOE OSTI2024

The hidden roots of wetland methane emissions

Abstract Wetlands are the largest natural source of methane (CH 4 ) globally. Climate and land use change are expected to alter CH 4 emissions but current and future wetland CH 4 budgets remain uncertain. One important predictor of wetland CH 4 flux, plants, play an important role in providing substrates for CH 4 ‐producing microbes, increasing CH 4 consumption by oxygenating the rhizosphere, and transporting CH 4 from soils to the atmosphere. Yet, there remain various mechanistic knowledge gaps regarding the extent to which plant root systems and their traits influence wetland CH 4 emissions. Here, we present a novel conceptual framework of the relationships between a range of root traits and CH 4 processes in wetlands. Based on a literature review, we propose four main CH 4 ‐relevant categories of root function: gas transport, carbon substrate provision, physicochemical influences and root system architecture. Within these categories, we discuss how individual root traits influence CH 4 production, consumption, and transport (PCT). Our findings reveal knowledge gaps concerning trait functions in physicochemical influences, and the role of mycorrhizae and temporal root dynamics in PCT. We also identify priority research needs such as integrating trait measurements from different root function categories, measuring root‐CH 4 linkages along environmental gradients, and following standardized root ecology protocols and vocabularies. Thus, our conceptual framework identifies relevant belowground plant traits that will help improve wetland CH 4 predictions and reduce uncertainties in current and future wetland CH 4 budgets.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1976

The Langley thermal protection system test facility: A description including design operating boundaries

A description of the Langley thermal protection system test facility is presented. This facility was designed to provide realistic environments and times for testing thermal protection systems proposed for use on high speed vehicles such as the space shuttle. Products from the combustion of methane-air-oxygen mixtures, having a maximum total enthalpy of 10.3 MJ/kg, are used as a test medium. Test panels with maximum dimensions of 61 cm x 91.4 cm are mounted in the side wall of the test region. Static pressures in the test region can range from .005 to .1 atm and calculated equilibrium temperatures of test panels range from 700 K to 1700 K. Test times can be as long as 1800 sec. Some experimental data obtained while using combustion products of methane-air mixtures are compared with theory, and calibration of the facility is being continued to verify calculated values of parameters which are within the design operating boundaries.

Klich, G. F.↗
DOE OSTI2020

Designing Catalysts for Dehydrogenation of Methane for Reducing Greenhouse Gas during Natural Gas Extraction

Catalytic conversion of methane (CH 4 ) into useful products is critical for maximizing the utility of natural gas output and for reducing green house gas release associated with flaring (burning off CH 4 at natural gas extraction sites). One particular useful technique is methane dry reforming (DRM), which involves the chemical reaction of CH 4 with carbon dioxide (CO 2 ) to generate carbon monoxide (CO), hydrogen gas (H 2 ), and subsequently other useful products. New and improved catalysts are required to facilitate efficient dry methane reforming. In this report, we apply the Density Functional Theory (DFT) computational technique to investigate a catalyst consisting of small nickel clusters (Ni n , n < 10) on ceria (Ce0 2 (111) surfaces) support. One main thrust of this project is to study the initial CH 4 and CO 2 reactions with the catalyst. We find that CH 4 exhibits barrierless reactive adsorption on to the catalyst. In order words, this step is likely not the rate-determining step. A second thrust is to perform detailed studies of the catalyst itself and examine the role of oxygen vacancies. Using a specific DFT method and a hypothesis about the absence of the Ce(III) redox state, we obtain predictions about oxygen vacancies in good agreement with experimental observations.

03 NATURAL GAS↗
DOE OSTI2025

AUTOIGNITION DELAY TIMES FOR REFORMATE GAS MIXTURES FROM METHANE GAS ENGINES

Methane slip is a prominent issue in natural gas reciprocating engines that are used in transportation and marine applications. The incomplete combustion that results in methane slip can be resolved with the introduction of hydrogen within the combustion mixture to improve methane oxidation and further enable combustion within the engine crevices where methane has previously remained unreacted. Steam methane reforming (SMR) is a common method used to produce hydrogen and can be used to design an onboard device to reduce methane slip from reciprocating engines. The development of this reformer device requires the validation of high-fidelity chemical kinetic models at the low temperatures of the crevice volumes of these engines. In this work, auto-ignition data is obtained using a shock tube at lean (φ—0.714 or λ—1.4) and stoichiometric (φ, λ = 1) equivalence ratios spanning a temperature range of 1042–1234 K at the 80-bar operating pressure of the test engine. Blends of methane, hydrogen, and reformate products from the SMR reaction are shock-heated in synthetic air, with the ignition delay time measured using an OH* chemiluminescence detector at 310 nm and a CH* detector at 430 nm. The experimental results are compared to several state-of-the-art chemical kinetic mechanisms from the literature. In general, most of the mechanisms show very good agreement with experiments at higher temperatures, with simulation results showing little deviation from experiments at lower temperatures. A sensitivity analysis was conducted, and the results reveal that the reaction H2 + CH3O2 = H + CH3O2H has a very significant role in determining low-temperature ignition delay times (IDTs) of SMR mixtures. These findings provide valuable insights into the chemical kinetics governing methane reformate combustion and contribute to the optimization of onboard reformer designs aimed at mitigating methane slip in natural gas-fueled engines.

Fraze, Matthew↗