Search NASA⌕ Search

SEARCH · Search NASA

Results for “microwave brightness temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

A Method to Retrieve Rainfall Rate over Land from TRMM Observations

Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) observations over mesoscale convective systems (MCSs) reveal that there are localized maxima in the rain rate with a scale of about 10 to 20 km that represent thunderstorms (Cbs). Some of these Cbs are developing or intense, while others are decaying or weak. These Cbs constitute only about 20 % of the rain area of a given MCS. Outside of Cbs, the average rain rate is much weaker than that within Cbs. From an analysis of the PR data, we find that the spatial distribution of rain and its character, convective or stratiform, is highly inhomogeneous. This complex nature of rain exists on a scale comparable to that of a Cb. The 85 GHz brightness temperature, T85, observations of the TRMM Microwave Imager (TMI) radiometer taken over an MCS reflect closely the PR rain rate pattern over land. Local maxima in rain rate shown by PR are observed as local minima in T85. Where there are no minima in T85, PR observations indicate there is light rain. However, the TMI brightness temperature measurements (Tbs) have poor ability to discriminate convective rain from stratiform rain. For this reason, a TMI rain retrieval procedure that depends primarily on the magnitude of Tbs performs poorly. In order to retrieve rain rate from TMI data on land one has to include the spatial distribution information deduced from the T85 data in the retrieval method. Then, quantitative estimation of rain rate can be accomplished. A TMI rain retrieval method developed along these lines can yield estimates of rain rate and its frequency distribution which agree closely with that given by PR. We find the current TRMM project TMI (Version 5) rain retrieval algorithm on land could be improved with the retrieval scheme developed here. To support the conceptual frame work of the rain retrieval method developed here, a theoretical analysis of the TMI brightness temperatures in convective and stratiform regions is presented.

Prabhakara, C.↗

Precision and Radiosonde Validation of Satellite Gridpoint Temperature Anomalies. Part I; MSU Channel 2: MSU Channel 2 - Pt. 1

In Part 1 of this study, monthly 2.5 deg. gridpoint anomalies in the TIROS-N (Television and Infrared Operational Satellite-N) series Microwave Sounding Unit (MSU) channel 2 brightness temperatures during 1979-88 are evaluated with multiple satellites and radiosonde data for their climate temperature monitoring capability. The MSU anomalies we computed about a 10-year mean annual cycle at each grid point, with the MSUs intercalibrated to a common arbitrary level. The intercalibrations remove relative biases between instruments of up to several tenths of a degree celsius. The monthly gridpoint anomaly agreement between concurrently operating satellites reveals single-satellite precision on generally better than 0.07 C in the tropics and better than 0.15 C at higher latitudes. Monthly anomalies in radiosonde channel 2 brightness temperatures computed with the radiative transfer equation compare very closely to the MSU measured anomalies in all climate zones, with correlations generally from 0.94 to 0.98 and standard errors of 0.15 C in the tropics to 0.30 C at high latitudes. Simplification of these radiative transfer calculations to a static weighting profile applied to the radiosonde temperature profile leads to an average degradation of only 0.02 deg. in the monthly skill. In terms of a more traditionally measured quantity, the MSU channel 2 anomalies match best with either the radiosonde 100-20-kPa or 100-15-kPa layer anomalies. No significant spurious trends were found in the 10-yr satellite dataset compared to the radiosondes that would indicate a calibration drift in either system. Thus, sequentially launched, overlapping passive microwave radiometers provide a useful system for monitoring intraseasonal to interannual climate anomalies and offer hope for monitoring of interdecadal trends from space. The Appendix includes previously unpublished details of the MSU gridpoint anomaly dataset construction. Part II of this study addresses the removal from channel 2 of the temperature influence above the 30-kPa level, providing a sharper and thus potentially more useful weighting function for monitoring lower tropospheric temperatures.

Spencer, Roy W.↗

Saturns Thermal Emission at 2.2-cm Wavelength as Imaged by the Cassini RADAR Radiometer

We present well-calibrated, high-resolution maps of Saturn's thermal emission at 2.2-cm wavelength obtained by the Cassini RADAR radiometer through the Prime and Equinox Cassini missions, a period covering approximately 6 years. The absolute brightness temperature calibration of 2% achieved is more than twice better than for all previous microwave observations reported for Saturn, and the spatial resolution and sensitivity achieved each represent nearly an order of magnitude improvement. The brightness temperature of Saturn in the microwave region depends on the distribution of ammonia, which our radiative transfer modeling shows is the only significant source of absorption in Saturn's atmosphere at 2.2-cm wavelength. At this wavelength the thermal emission comes from just below and within the ammonia cloud-forming region, and yields information about atmospheric circulations and ammonia cloud-forming processes. The maps are presented as residuals compared to a fully saturated model atmosphere in hydrostatic equilibrium. Bright regions in these maps are readily interpreted as due to depletion of ammonia vapor in, and, for very bright regions, below the ammonia saturation region. Features seen include the following: a narrow equatorial band near full saturation surrounded by bands out to about 10deg planetographic latitude that demonstrate highly variable ammonia depletion in longitude; narrow bands of depletion at -35deg latitude; occasional large oval features with depleted ammonia around -45deg latitude; and the 2010-2011 storm, with extensive saturated and depleted areas as it stretched halfway around the planet in the northern hemisphere. Comparison of the maps over time indicates a high degree of stability outside a few latitudes that contain active regions.

composition↗

A Microwave Technique for Mapping Ice Temperature in the Arctic Seasonal Sea Ice Zone

A technique for deriving ice temperature in the Arctic seasonal sea ice zone from passive microwave radiances has been developed. The algorithm operates on brightness temperatures derived from the Special Sensor Microwave/Imager (SSM/I) and uses ice concentration and type from a previously developed thin ice algorithm to estimate the surface emissivity. Comparisons of the microwave derived temperatures with estimates derived from infrared imagery of the Bering Strait yield a correlation coefficient of 0.93 and an RMS difference of 2.1 K when coastal and cloud contaminated pixels are removed. SSM/I temperatures were also compared with a time series of air temperature observations from Gambell on St. Lawrence Island and from Point Barrow, AK weather stations. These comparisons indicate that the relationship between the air temperature and the ice temperature depends on ice type.

St.Germain, Karen M.↗

Microwave emission from steady and moving sunspots

Force-free extrapolations of photospheric magnetic field observations from Marshall Space Flight Center have been used to compute the total intensity and circular polarizaton of sunspot associated emission from active region 2502 in the period June 13 to 15, 1980. The computed maps were compared to high resolution observations of the same active region obtained with the Westerbork Synthesis Radio Telescope. The most interesting aspect of the active region was the development of a new spot between the preceding and the following spots on June 14, which subsequently merged with the preceding with the preceding spot. The new spot was associated with enhanced microwave emission with a peak brightness temperature in excess of 4 x 10 to the 6th K. It is shown that unrealistic values of the conductive flux are required for the interpretation of the emission of the new sunspot in terms of thermal processes. It is suggested that this source is due to gyrosynchrotron radiation from mildly relativistic electrons accelerated by resistive instabilities in the evolving magnetic field.

Alissandrakis, C. E.↗

Improving a Spectral Bin Microphysical Scheme Using TRMM Satellite Observations

Comparisons between cloud model simulations and observations are crucial in validating model performance and improving physical processes represented in the mod Tel.hese modeled physical processes are idealized representations and almost always have large rooms for improvements. In this study, we use data from two different sensors onboard TRMM (Tropical Rainfall Measurement Mission) satellite to improve the microphysical scheme in the Goddard Cumulus Ensemble (GCE) model. TRMM observed mature-stage squall lines during late spring, early summer in central US over a 9-year period are compiled and compared with a case simulation by GCE model. A unique aspect of the GCE model is that it has a state-of-the-art spectral bin microphysical scheme, which uses 33 different bins to represent particle size distribution of each of the seven hydrometeor species. A forward radiative transfer model calculates TRMM Precipitation Radar (PR) reflectivity and TRMM Microwave Imager (TMI) 85 GHz brightness temperatures from simulated particle size distributions. Comparisons between model outputs and observations reveal that the model overestimates sizes of snow/aggregates in the stratiform region of the squall line. After adjusting temperature-dependent collection coefficients among ice-phase particles, PR comparisons become good while TMI comparisons worsen. Further investigations show that the partitioning between graupel (a high-density form of aggregate), and snow (a low-density form of aggregate) needs to be adjusted in order to have good comparisons in both PR reflectivity and TMI brightness temperature. This study shows that long-term satellite observations, especially those with multiple sensors, can be very useful in constraining model microphysics. It is also the first study in validating and improving a sophisticated spectral bin microphysical scheme according to long-term satellite observations.

Li, Xiaowen↗

Precipitation Phase Determination by Brightness Temperatures From ATMS

Previous studies used the temperature-related variables from model outputs (e.g., 2-m temperature) for precipitation phase determination (i.e., rain–snow separation). This study presents a new idea for precipitation phase determination using brightness temperatures (TBs) from Advanced Technology Microwave Sounder (ATMS). It is found that TB-based phase discrimination shows comparable determination performance to that from model outputs over land. In contrast, TB-based phase discrimination over the ocean performs noticeably worse than that from model outputs. Further analyses reveal that the phase determination performance over land from TBs slightly depends on the satellite’s local zenith angle. However, the determination performance over the ocean strongly depends on the satellite’s local zenith angle, with the skill score decreasing sharply from 0.74 near the nadir to 0.55 near the edge. These results imply that over land, TBs may be used directly for phase determination, which can be extended to other operational and future microwave sounders with similar channels available.

Yalei You↗

A model for microwave emission from vegetation-covered fields

The measured brightness temperatures over vegetation-covered fields are simulated by a radiative transfer model which treats the vegetation as a uniform canopy with a constant temperature, over a moist soil which emits polarized microwave radiation. The analytic formula for the microwave emission has four parameters: roughness height, polarization mixing factor, effective canopy optical thickness, and single scattering albedo. A good representation has been obtained with the model for both the horizontally and vertically polarized brightness temperatures at 1.4 and 5 GHz frequencies, over fields covered with grass, soybean and corn. A directly proportional relation is found between effective canopy optical thickness and the amount of water present in the vegetation canopy. The effective canopy single scattering albedo depends on vegetation type.

Mo, T.↗

Estimating the Uncertainty in Passive-Microwave Rain-Retrievals

Current passive-microwave rain-retrieval methods are largely based on databases built off-line using cloud models. The vertical distribution of hydrometeors within the cloud has a large impact on upwelling brightness temperatures ([31,[5]). Thus, a forward radiative transfer model can predict off-line the radiance associated with different rain scenarios. To estimate the rain from measured brightness temperatures, one simply looks for the rain scenario whose associated radiances are closest to the measurements. To understand the uncertainties in this process, we first study the dependence of the simulated brightness temperatures on different hydrometeor size distribution (DSD) models. We then analyze the marginal and joint distributions of the radiances observed by the Tropical Rainfall Measuring Mission satellite and of those in the databases used in the TRMM rain retrievals. We finally calculate the covariances of the rain profiles and brightness temperatures in the TRMM passive-microwave database and derive a simple parametric model for the conditional uncertainty, given measured radiances. These results are used to characterize the uncertainty inherent in the passive-microwave retrieval.

Coppens, Dorothee↗

Analysis of Saturn's Thermal Emission at 2.2-cm Wavelength: Spatial Distribution of Ammonia Vapor

This work focuses on determining the latitudinal structure of ammonia vapor in Saturn's cloud layer near 1.5 bars using the brightness temperature maps derived from the Cassini RADAR (Elachi et al., 2004) instrument, which works in a passive mode to measure thermal emission from Saturn at 2.2-cm wavelength. We perform an analysis of five brightness temperature maps that span epochs from 2005 to 2011, which are presented in a companion paper by Janssen et al. (2013a, this issue). The brightness temperature maps are representative of the spatial distribution of ammonia vapor, since ammonia gas is the only effective opacity source in Saturn's atmosphere at 2.2-cm wavelength. Relatively high brightness temperatures indicate relatively low ammonia relative humidity (RH), and vice versa. We compare the observed brightness temperatures to brightness temperatures computed using the Juno atmospheric microwave radiative transfer (JAMRT) program which includes both the means to calculate a tropospheric atmosphere model for Saturn and the means to carry out radiative transfer calculations at microwave frequencies. The reference atmosphere to which we compare has a 3x solar deep mixing ratio of ammonia (we use 1.352x10(exp -4) for the solar mixing ratio of ammonia vapor relative to H2; see Atreya, 2010) and is fully saturated above its cloud base. The maps are comprised of residual brightness temperatures-observed brightness temperature minus the model brightness temperature of the saturated atmosphere.

Atmospheres↗

Satellite passive microwave rain rate measurement over croplands during spring, summer and fall

Rain-rate algorithms for spring, summer and fall that have been developed from comparisons between the brightness temperatures measured by the Nimbus-7 Scanning Multichannel Microwave Radiometer (SMMR) and rain rates derived from operational WSR-57 radars over land are described. Data were utilized from a total of 25 SMMR passes and 234 radars, resulting in about 12,000 observations of about 1600 sq/km areas. Multiple correlation coefficients of 0.63, 0.80 and 0.75 are achieved for the spring, summer and fall algorithms, respectively. Most of this information is in the form of multifrequency contrast in brightness temperature, which is interpreted as a measurement of the degree to which the land-emitted radiation is attenuated by the rain systems. The SMMR 37-GHz channel has more information on rain rate than any other channel. By combining the lower frequency channels with the 37-GHz observations, variations in land and precipitation thermometric temperatures can be removed, leaving rain attenuation as the major effect on brightness temperature. Polarization screening at 37 GHz is found to be sufficient to screen out cases of wet ground, which is only important when the ground is relatively vegetation free. Heavy rain cases are found to be significant part of the algorithms' success, because of the strong microwve signatures (low-brightness temperatures) that result from the presence of precipitation-sized ice in the upper portions of heavily precipitating storms. If IR data are combined with the summer microwave data, an improved (0.85) correlation with radar rain rates is achieved.

Spencer, R. W.↗

A Method to Retrieve Rainfall Rate Over Land from TRMM Microwave Imager Observations

Over tropical land regions, rain rate maxima in mesoscale convective systems revealed by the Precipitation Radar (PR) flown on the Tropical Rainfall Measuring Mission (TRMM) satellite are found to correspond to thunderstorms, i.e., Cbs. These Cbs are reflected as minima in the 85 GHz brightness temperature, T85, observed by the TRMM Microwave Imager (TMI) radiometer. Because the magnitude of TMI observations do not discriminate satisfactorily convective and stratiform rain, we developed here a different TMI discrimination method. In this method, two types of Cbs, strong and weak, are inferred from the Laplacian of T85 at minima. Then, to retrieve rain rate, where T85 is less than 270 K, a weak (background) rain rate is deduced using T85 observations. Furthermore, over a circular area of 10 km radius centered at the location of each T85 minimum, an additional Cb component of rain rate is added to the background rain rate. This Cb component of rain rate is estimated with the help of (T19-T37) and T85 observations. Initially, our algorithm is calibrated with the PR rain rate measurements from 20 MCS rain events. After calibration, this method is applied to TMI data taken from several tropical land regions. With the help of the PR observations, we show that the spatial distribution and intensity of rain rate over land estimated from our algorithm are better than those given by the current TMI-Version-5 Algorithm. For this reason, our algorithm may be used to improve the current state of rain retrievals on land.

Prabhakara, C.↗

Airborne Microwave Radiometry on a Semi-Arid Area During HAPEX-Sahel

Airborne microwave radiometric measurements in the framework of the HAPEX-Sahel Experiment were performed by the Push Broom Microwave Radiometer (PBMR) and the PORTOS radiometer. The flights of both radiometers produced an original set of data covering the 1.4-90 GHz range of frequency. The East and West Central Super Sites were the areas most intensively observed by the microwave radiometers. Over those sites, several brightness temperature (TB) maps are available at seven dates distributed over a 1 month period in the middle of the rainy season. A comparison of the two radiometers demonstrates their radiometric quality and the precision of the localization of the microwave observations. At 1.4 GHz, the vegetation had very little effect on the soil microwave emission. Maps of soil moisture were developed using a single linear relationship between TB and the surface soil moisture. There is an important spatial heterogeneity in the soil moisture distribution, which is explained by both the soil moisture hydrodynamic properties and the localization of the precipitation fields. At 5.05 GHz, the vegetation must be accounted for to infer soil moisture from the microwave observations. A method based on a simple radiative transfer model and on microwave data has shown encouraging results.

Chanzy, A↗

Retrieval of Ocean Surface Windspeed and Rainrate from the Hurricane Imaging Radiometer (HIRAD) Brightness Temperature Observations

The Hurricane Imaging Radiometer (HIRAD) is a new airborne synthetic aperture passive microwave radiometer capable of wide swath imaging of the ocean surface wind speed under heavy precipitation e.g. in tropical cyclones. It uses interferometric signal processing to produce upwelling brightness temperature (Tb) images at its four operating frequencies 4, 5, 6 and 6.6 GHz [1,2]. HIRAD participated in NASA s Genesis and Rapid Intensification Processes (GRIP) mission during 2010 as its first science field campaign. It produced Tb images with ~70 km swath width and 3 km resolution from a ~ 20 km altitude. From this, ocean surface wind speed and column averaged atmospheric liquid water content can be retrieved across the swath. The column averaged liquid water then could be related to an average rain rate. The retrieval algorithm (and the HIRAD instrument itself) is a direct descendant of the nadir-only Stepped Frequency Microwave Radiometer that is used operationally by the NOAA Hurricane Research Division to monitor tropical cyclones [3,4]. However, due to HIRAD s slant viewing geometry (compared to nadir viewing SFMR) a major modification is required in the algorithm. Results based on the modified algorithm from the GRIP campaign will be presented in the paper.

Biswas, Sayak K.↗

Objectives of the Mariner Venus Microwave Radiometer Experiment

At present, there are several models involving the surface, atmosphere (and ionosphere), and cloud conditions of the planet Venus which attempt to account for the observed high brightness temperature of 600 degrees Kelvin in the microwave temperature region. None of these models can be definitely accepted or rejected on the basis of presently available data, and it is the goal of the microwave radiometer experiment planned for the Mariner Venus mission to determine which of the proposed models most nearly approximates Venusian conditions. The disc of the planet will be scanned at 4 wavelengths - 4, 8, 13.5 and 19 millimeters - to measure the temperature distribution across the planet. Measurement accuracy is expected to be to within 2 percent. In addition to the study of gross thermal characteristics of surface and atmosphere (or ionosphere), some information regarding the fine-scale thermal variations will be obtained. Since Venus appears to be continuously covered by clouds, it is obvious that only in the microwave region can one be sure of penetrating clear to the solid surface. Because of the absorbing characteristics of the Earth's atmosphere, and because of the relatively poor resolution obtainable in this region of the spectrum, one is forced to utilize the platform afforded by a planetary flyby or orbiter in order to conduct a reliable high resolution study of the planet. To do so from Earth (neglecting terrestrial atmospheric attenuation ) would require colossal radio telescopes.

RADIO ASTRONOMY↗

Design and Development of the SMAP Microwave Radiometer Electronics

The SMAP microwave radiometer will measure land surface brightness temperature at L-band (1413 MHz) in the presence of radio frequency interference (RFI) for soil moisture remote sensing. The radiometer design was driven by the requirements to incorporate internal calibration, to operate synchronously with the SMAP radar, and to mitigate the deleterious effects of RFI. The system design includes a highly linear super-heterodyne microwave receiver with internal reference loads and noise sources for calibration and an innovative digital signal processor and detection system. The front-end comprises a coaxial cable-based feed network, with a pair of diplexers and a coupled noise source, and radiometer front-end (RFE) box. Internal calibration is provided by reference switches and a common noise source inside the RFE. The RF back-end (RBE) downconverts the 1413 MHz channel to an intermediate frequency (IF) of 120 MHz. The IF signals are then sampled and quantized by high-speed analog-to-digital converters in the radiometer digital electronics (RDE) box. The RBE local oscillator and RDE sampling clocks are phase-locked to a common reference to ensure coherency between the signals. The RDE performs additional filtering, sub-band channelization, cross-correlation for measuring third and fourth Stokes parameters, and detection and integration of the first four raw moments of the signals. These data are packetized and sent to the ground for calibration and further processing. Here we discuss the novel features of the radiometer hardware particularly those influenced by the need to mitigate RFI.

radio frequency interference↗

Global temperature variations

Intercalibration statistics of all Microwave Sounding Units (MSUs) operating through 1990 were computed and brightness temperature anomalies on various space and time scales were compiled for MSU channels 2 (troposphere) and 4 (lower stratosphere). A tropospheric retrieval was developed through combination of channel 2 data from various view angles across the MSU scan swath to achieve cancellation of the influence of the lower stratosphere, and much of the upper troposphere, on that channel. Radiosonde validation of the MSU channel 2 and tropospheric retrieval anomalies was performed with 10 years of data at all U.S. controlled stations.

Spencer, Roy W.↗

Multiple GISS AGCM Hindcasts and MSU Versions of 1979-1998

Multiple realizations of the 1979-1998 time period have been simulated by the Goddard Institute for Space Studies Atmospheric General Circulation Model (GISS AGCM) to explore its responsiveness to accumulated forcings, particularly over sensitive agricultural regions. A microwave radiative transfer postprocessor has produced the AGCM's lower tropospheric, tropospheric and lower stratospheric brightness temperature (Tb) time series for correlations with the various Microwave Sounding Unit (MSU) time series available. MSU maps of monthly means and anomalies were also used to assess the AGCM's mean annual cycle and regional variability. Seven realizations by the AGCM were forced by observed sea surface temperatures (sst) through 1992 to gather rough standard deviations associated with internal model variability. Subsequent runs hindcast January 1979 through April 1998 with an accumulation of forcings: observed ssts, greenhouse gases, stratospheric volcanic aerosols. stratospheric and tropospheric ozone and tropospheric sulfate and black carbon aerosols. The goal of narrowing gaps between AGCM and MSU time series was complicated by MSU time series, by Tb simulation concerns and by unforced climatic variability in the AGCM and in the real world. Lower stratospheric Tb correlations between the AGCM and MSU for 1979-1998 reached as high as 0.91 +/-0.16 globally with sst, greenhouse gases, volcanic aerosol, stratospheric ozone forcings and tropospheric aerosols. Mid-tropospheric Tb correlations reached as high as 0.66 +/-.04 globally and 0.84 +/-.02 in the tropics. Oceanic lower tropospheric Tb correlations similarly reached 0.61 +/-.06 globally and 0.79 +/-.02 in the tropics. Of the sensitive agricultural areas considered, Nordeste in northeastern Brazil was simulated best with mid-tropospheric Tb correlations up to 0.75 +/- .03. The two other agricultural regions, in Africa and in the northern mid-latitudes, suffered from higher levels of non-sst variability. Zimbabwe had a maximum mid-tropospheric correlation of 0.54 +/- 0.11 while the U.S. Cornbelt had only 0.25 +/- .10. Precipitation and surface temperature performance are also examined over these regions. Correlations of MSU and AGCM time series mostly improved with addition of explicit atmospheric forcings in zonal bands but not in agricultural regional bins each encompassing only six AGCM gridcells.

Shah, Kathryn Pierce↗