Search NASA⌕ Search

SEARCH · Search NASA

Results for “modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Design and preliminary tests of a blade tip air mass injection system for vortex modification and possible noise reduction on a full-scale helicopter rotor

Full-scale tests were conducted on the Langley helicopter rotor test facility as part of a study to evaluate the effectiveness of a turbulent blade tip air mass injection system in alleviating the impulsive noise (blade slap) caused by blade-vortex interaction. Although blade-slap conditions could not be induced during these tests, qualitative results from flow visualization studies using smoke showed that the differential velocity between the jet velocity and the rotor tip speed was a primary parameter controlling the vortex modification.

Pegg, R. J.↗
NASA NTRS1975

Evaluation of materials and design modifications for aircraft brakes

A test program is described which was carried out to evaluate several proposed design modifications and several high-temperature friction materials for use in aircraft disk brakes. The evaluation program was carried out on a specially built test apparatus utilizing a disk brake and wheel half from a small het aircraft. The apparatus enabled control of brake pressure, velocity, and braking time. Tests were run under both constant and variable velocity conditions and covered a kinetic energy range similar to that encountered in aircraft brake service. The results of the design evaluation program showed that some improvement in brake performance can be realized by making design changes in the components of the brake containing friction material. The materials evaluation showed that two friction materials show potential for use in aircraft disk brakes. One of the materials is a nickel-based sintered composite, while the other is a molybdenum-based material. Both materials show much lower wear rates than conventional copper-based materials and are better able to withstand the high temperatures encountered during braking. Additional materials improvement is necessary since both materials show a significant negative slope of the friction-velocity curve at low velocities.

Ho, T. L.↗
NASA NTRS1976

Modification of Moore measuring machine/Leitz microscope

Quality assurance mechanical inspection, anticipating the need for improved measuring techniques for the various laboratory programs, has perfected a modification of the Leitz microscope for the Moore measuring machine that has the capability of significantly reducing inspection time with increased reliability.

Greth, H. A.↗
NASA NTRS1976

Transonic stability and control characteristics of a 0.015 scale model 69-0 of the space shuttle orbiter with forebody RSI modification in the NASA/LaRC 8 foot TPT (LA72)

Tests were conducted in the NASA/LaRC 8 foot transonic wind tunnel from March 26 through 31, 1976. The model was a 0.015 scale SSV Orbiter with forebody modifications to simulate slight reductions in the reusable surface insulation (RSI) thickness. Six component aerodynamic force and moment data were obtained at Mach numbers from 0.35 to 1.20 over an angle of attack range from -2 deg to 20 deg at sideslip angles of 0 deg and 5 deg.

Ball, J. W.↗
NASA NTRS1976

Structural analyses for the modification and verification of the Viking aeroshell

The Viking aeroshell is an extremely lightweight flexible shell structure that has undergone thorough buckling analyses in the course of its development. The analytical tools and modeling technique required to reveal the structural behavior are presented. Significant results are given which illustrate the complex failure modes not usually observed in simple models and analyses. Both shell-of-revolution analysis for the pressure loads and thermal loads during entry and a general shell analysis for concentrated tank loads during launch were used. In many cases fixes or alterations to the structure were required, and the role of the analytical results in determining these modifications is indicated.

Stephens, W. B.↗
NASA NTRS1977

Modification of the DSN radio frequency angular tropospheric refraction model

The previously derived DSN Radio Frequency Angular Tropospheric Refraction Model contained an assumption which was subsequently seen to be at a variance with the theoretical basis of angular refraction. The modification necessary to correct the model is minor in that the value of a constant is changed.

Berman, A. L.↗
NASA NTRS1976

Some modifications of the theory of colloidal plasmas

Two effects leading to significant modifications of the theory of colloidal plasmas are discussed. The first concerns the fact that depending on the sign of the electric potential on a droplet in a colloidal plasma, the electrons or the ions impact on the droplet with a much higher effective temperature than their background plasma temperature. The analytical expression for this temperature is derived in the first part of the paper. In the second part, it is shown that the electron-droplet collision rate in a wet alkali-metal vapor plasma may be substantially modified by the effect of the attractive potential between a droplet and an electron because of the image of the electron in the droplet. This effect is found to be important when the droplet sizes are in the submicron range.

De, B. R.↗
NASA NTRS1977

Some measured and calculated effects of a tip vortex modification device on impulsive noise

The results of a recent wind tunnel test program to evaluate the effectiveness of the Tip Air Mass Injection (TAMI) system in modifying the blade tip vortex occurring during helicopter flight is described with attention to the effect of this modification on the impulsive noise. The measurement program is explained, and the correlation between experimental and predicted results is discussed. Topics considered include the effect of descent rate on noise pressure time histories, the effect of air mass injection on noise, and the analysis based on a dB(A) weighted approach. Impulsive noise generated by the interaction of a helicopter rotor blade and the concentrated tip vortex during forward flight descent is a primary contributor to acoustic annoyance as it draws early attention to the presence of the helicopter.

Pegg, R. J.↗
NASA NTRS1978

The modification and application of Kuo's parameterization of cumulus convection in middle latitudes

An evaluation to reveal physical insight into the involved mechanisms through a combination of the large scale heat and moisture budgets and formulation of the latent heat released was performed. To improve upon the treatment of the interaction of deep convection with the environment, modifications consisting of considerations of the large scale moisture supply and of the vertical transport of moisture and of dry static energy inside the cloud are made. Also, a two layer cloud ensemble model is combined with the modified scheme. An examination of the modified scheme is performed by combining the large scale heat and moisture budgets and the modified formulation of the latent heat released. The modified parameterization procedures are compared with the original scheme, and the results of tests of both schemes are discussed. A variational optimization scheme is developed to analyze the wind field such that the integrated continuity equation and the global boundary condition are satisfied.

Liang, W. J.↗
NASA NTRS1976

USB noise reduction by nozzle and flap modifications

The development of concepts for reducing upper surface blown flap noise at the source through flap modifications and special nozzles is reviewed. In particular, recent results obtained on the aerodynamic and acoustic performance of flaps with porous surfaces near the trailing edge and multi-slotted nozzles are reviewed. Considerable reduction (6-10 db) of the characteristic low frequency peak is shown. The aerodynamic performance is compared with conventional systems, and prospects for future improvements are discussed.

Hayden, R. E.↗
NASA NTRS1977

Complex mixer system modifications

Modifications of the complex mixer system to increase bandwidth and number of channels were made. Three modified complex mixers were installed at DSS 14 and were used to process planetary radar signals in March and April of 1977.

Stevens, G. L.↗
NASA NTRS1978

Modifications to the WDTVOR and VORTWD computer programs for converting input data between VORLAX and wave drag input formats

Computer programs, WDTVOR and VORTWD, were developed to convert input data between wave drag and VORLAX input formats. Both programs were modified to include the capability of converting multisegment fuselage data. The capability of converting VORLAX geometric data to wave drag format without camber as well as with camber was added to the VORTWD program. Listings of the original program, the modifications, and the modified program are included for both programs.

Martin, G. L.↗
NASA NTRS1978

Modification of fresh crater landforms - Evidence from the moon and Mercury

The morphology of fresh lunar and Mercurian craters provides insight into processes of crater formation and modification. Measurements determined for Mercurian craters and compared to previously presented lunar data are depth/diameter, central peak and wall-related mass movement frequencies as functions of diameter, crater rim wall width/rim diameter, rim diameter/floor diameter, and central peak height/rim diameter. Two important results are as follows: (1) there is no evidence for direct gravity scaling of crater morphology, although some slight scaling relationship may be indicated, and (2) mass movements are responsible for the change in depth/diameter relationship observed near 2-km depth and 10-km diameter. The latter result is helpful in explaining gravitational and topographic data which suggest low-density regions beneath large fresh craters.

Malin, M. C.↗
NASA NTRS1979

A modification to linearized theory for prediction of pressure loadings on lifting surfaces at high supersonic Mach numbers and large angles of attack

A new linearized-theory pressure-coefficient formulation was studied. The new formulation is intended to provide more accurate estimates of detailed pressure loadings for improved stability analysis and for analysis of critical structural design conditions. The approach is based on the use of oblique-shock and Prandtl-Meyer expansion relationships for accurate representation of the variation of pressures with surface slopes in two-dimensional flow and linearized-theory perturbation velocities for evaluation of local three-dimensional aerodynamic interference effects. The applicability and limitations of the modification to linearized theory are illustrated through comparisons with experimental pressure distributions for delta wings covering a Mach number range from 1.45 to 4.60 and angles of attack from 0 to 25 degrees.

Carlson, H. W.↗
NASA NTRS1979

Modifications to give HOPE/MDC 2.0 the capability to solve for or consider vent forces: Mission planning, mission analysis, and software formulation

The modifications are described as necessary to give the Houston Operations Predictor/Estimator (HOPE) program the capability to solve for or consider vent forces for orbit determination. The model implemented in solving for vent forces is described along with the integrator problems encountered. A summary derivation of the mathematical principles applicable to solve/consider methodology is provided.

Zyla, L. V.↗
NASA NTRS1974

Evaluation of exercise-respiratory system modifications and integration schemes for physiological systems

Exercise subroutine modifications are implemented in an exercise-respiratory system model yielding improvement of system response to exercise forcings. A more physiologically desirable respiratory ventilation rate in addition to an improved regulation of arterial gas tensions and cerebral blood flow is observed. A respiratory frequency expression is proposed which would be appropriate as an interfacing element of the respiratory-pulsatile cardiovascular system. Presentation of a circulatory-respiratory system integration scheme along with its computer program listing is given. The integrated system responds to exercise stimulation for both nonstressed and stressed physiological states. Other integration possibilities are discussed with respect to the respiratory, pulsatile cardiovascular, thermoregulatory, and the long-term circulatory systems.

Gallagher, R. R.↗
NASA NTRS1979

Space shuttle orbiter trimmed center-of-gravity extension study. Volume 5: Effects of configuration modifications on the aerodynamic characteristics of the 140A/B orbiter at Mach numbers of 2.5, 3.95 and 4.6

Supersonic aerodynamic characteristics are presented for the 140A/B space shuttle orbiter configuration (0.010 scale) and for the configuration modified to incorporate geometry changes in the wing planform fillet region. The modifications designed to extend the orbiter's longitudinal trim capability to more forward center-of-gravity locations, included reshaping of the baseline wing planform fillet and adding canards. The investigation was made in the high Mach number test section of the Langley Unitary Plan Wind Tunnel at a Reynolds number of approximately 2.2 million based on fuselage reference length. The angle-of-attack range for the investigation extended from -1 deg to 31 deg. Data were obtained with the elevators and body flap deflected at appropriate negative and positive conditions to assess the trim limits.

Phillips, W. P.↗