Search NASA⌕ Search

SEARCH · Search NASA

Results for “nematicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Strain-Induced Quantum Phase Transitions in Magic-Angle Graphene

In this work, we investigate the effect of uniaxial heterostrain on the interacting phase diagram of magic-angle twisted bilayer graphene. Using both self-consistent Hartree-Fock and density-matrix renormalization group calculations, we find that small strain values (ε~0.1%-0.2%) drive a zero-temperature phase transition between the symmetry-broken "Kramers intervalley-coherent" insulator and a nematic semimetal. The critical strain lies within the range of experimentally observed strain values, and we therefore predict that strain is at least partly responsible for the sample-dependent experimental observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Identification of Non-Fermi Liquid Physics in a Quantum Critical Metal via Quantum Loop Topography

Non-Fermi liquid physics is ubiquitous in strongly correlated metals, manifesting itself in anomalous transport properties, such as a $\textit{T}$-linear resistivity in experiments. However, its theoretical understanding in terms of microscopic models is lacking, despite decades of conceptual work and attempted numerical simulations. In this work, we demonstrate that a combination of sign-problem-free quantum Monte Carlo sampling and quantum loop topography, a physics-inspired machine-learning approach, can map out the emergence of non-Fermi liquid physics in the vicinity of a quantum critical point (QCP) with little prior knowledge. Using only three parameter points for training the underlying neural network, we are able to robustly identify a stable non-Fermi liquid regime tracing the fans of metallic QCPs at the onset of both spin-density wave and nematic order. In particular, we establish for the first time that a spin-density wave QCP commands a wide fan of non-Fermi liquid region that funnels into the quantum critical point. Our study thereby provides an important proof-of-principle example that new physics can be detected via unbiased machine-learning approaches.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Possible Superconductivity with a Bogoliubov Fermi Surface in a Lightly Doped Kagome U(1) Spin Liquid

Whether the doped t-J model on the Kagome lattice supports exotic superconductivity has not been decisively answered. In this paper, we propose a new class of variational states for this model and perform large-scale variational Monte Carlo simulation on it. The proposed variational states are parameterized by the SU(2)-gauge-rotation angles, as the SU(2)-gauge structure hidden in the Gutzwiller-projected mean-field ansatz for the undoped model is broken upon doping. These variational doped states smoothly connect to the previously studied U(1) π-flux or 0-flux states, and energy minimization among them yields a chiral noncentrosymmetric nematic superconducting state with 2 × 2-enlarged unit cell. Moreover, this pair density wave state possesses a finite Fermi surface for the Bogoliubov quasi particles. We further study experimentally relevant properties of this intriguing pairing state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Unlocking New Regimes in Fractional Quantum Hall Effect with Quaternions

We demonstrate that formulating the composite-fermion theory of the fractional quantum Hall (FQH) effect in terms of quaternions greatly expands its reach and opens the door into many interesting issues that were previously not amenable to quantitative theoretical investigation. As an illustration, we explore the possibility of a nematic or a charge-density wave instability of the composite-fermion Fermi sea at half-filled Landau level and of the nearby FQH states by looking for a gap closing instability of the neutral magneto-roton excitation. As a result, our quaternion formulation of the FQH effect has been inspired by mathematical developments in the theoretical analyses of gravitational wave modes and cosmic microwave background radiation, where an important role is played by spin-weighted spherical harmonics that are nothing but monopole harmonics appearing in the spherical geometry for the FQH effect.

Composite fermions↗
DOE OSTI2021

Orbital ordering in the layered perovskite material CsVF 4

In strongly correlated electronic systems, several novel physical properties are induced by the orbital degree of freedom. In particular, orbital degeneracy near the Fermi level leads to spontaneous symmetry breaking, such as the nematic state in FeSe and the orbital ordering in several perovskite systems. Here, the novel layered perovskite material CsVF 4 , with a 3 d 2 electronic configuration, was systematically studied using density-functional theory and a multiorbital Hubbard model within the Hatree-Fock approximation. Furthermore, our results show that CsVF 4 should be magnetic, with a G-type antiferromagnetic arrangement in the a b plane and weak antiferromagnetic exchange along the c axis, in agreement with experimental results. Driven by the Jahn-Teller distortion in the VF 6 octahedra that shorten the c axis, the system displays an interesting electron occupancy d x y 1 ( d x z d y z ) 1 corresponding to the lower nondegenerate d x y orbital being half-filled and the other two degenerate d y z and d x z orbitals sharing one electron per site. We show that this degeneracy is broken and a novel d y z / d x z staggered orbital pattern is here predicted by both the first-principles and Hubbard model calculations. This orbital ordering is driven by the electronic instability associated with degeneracy removal to lower the energy.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nanoscale visualization of the thermally driven evolution of antiferromagnetic domains in FeTe thin films

Antiferromagnetic order, being a ground state of a number of exotic quantum materials, is of immense interest both from the fundamental physics perspective and for driving potential technological applications. For a complete understanding of antiferromagnetism in materials, nanoscale visualization of antiferromagnetic domains, domain walls, and their robustness to external perturbations is highly desirable. Here, we synthesize antiferromagnetic FeTe thin films using molecular-beam epitaxy. We visualize local antiferromagnetic ordering and domain formation using spin-polarized scanning tunneling microscopy. From the atomically resolved scanning tunneling microscopy topographs, we calculate local structural distortions to find a high correlation with the distribution of the antiferromagnetic order. This is consistent with the monoclinic structure in the antiferromagnetic state. Interestingly, we observe a substantial domain-wall change by small temperature variations, unexpected for the low-temperature changes used compared to the much higher antiferromagnetic ordering temperature of FeTe. This is in contrast to electronic nematic domains in the cousin FeSe multilayer films, where we find no electronic or structural change within the same temperature range. Further, our experiments provide the atomic-scale imaging of perturbation-driven magnetic domain evolution simultaneous with the ensuing structural response of the system. The results reveal surprising thermally driven modulations of antiferromagnetic domains in FeTe thin films well below the Néel temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Magnetic anisotropy and two-dimensional short-range chemical ordering in Ba 1−𝑥 ⁢Na 𝑥 ⁢Fe 2 ⁢As 2

A true understanding of the properties of pnictide superconductors requires the development of high-quality materials and performing measurements designed to unravel their intrinsic properties and short-range nematic correlations which are often obscured by extrinsic effects such as poor crystallinity, inhomogeneity, domain formation, and twinning. Here, in this paper, we report the systematic growth of high-quality Na-substituted BaFe 2 As 2 single crystals and their characterization using pulsed magnetic fields x-ray diffraction and x-ray diffuse scattering. Analysis of the properties and compositions of the highest-quality crystals shows that their actual Na stoichiometry is about 50-60% of the nominal content and that the targeted production of crystals with specific compositions is accessible. We derived a reliable equation to estimate the Na stoichiometry based on the measured superconducting T c of these materials. Attempting to force spin reorientation and induce tetragonality, orthorhombic Ba 1-x Na x Fe 2 As 2 single crystals subjected to out-of-plane magnetic fields up to 31.4T are found to exhibit strong in-plane magnetic anisotropy demonstrated by the insufficiency of such high fields in manipulating the relative population of their twinned domains or in suppressing the orthorhombic order. Broad x-ray diffuse-intensity rods observed at temperatures between 30 and 300 K uncover short-range structural correlations. Local structure modeling together with 3D-Δ pair-distribution function mapping of real-space interatomic vectors show that the diffuse scattering arises from in-plane short-range chemical correlations of the Ba and Na atoms coupled with short-range atomic displacements within the same plane due to an effective size difference between the two atomic species.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Kondo enabled transmutation between spinons and superconducting vortices: Origin of magnetic memory in 4 H b − TaS 2

Recent experiments [Persky , ] demonstrate a magnetic memory effect in 4 H b − TaS 2 above its superconducting transition temperature, where Abriokosov vortices are spontaneously generated by lowering the temperature at zero magnetic field after field training the normal state. Motivated by the experiment, we propose the chiral quantum spin liquid (QSL) stabilized in the constituent layers of 4 H b − TaS 2 as a mechanism. We model 4 H b − TaS 2 as coupled layers of the chiral QSL and the superconductor. Through the Kondo coupling between the localized moments and conduction electrons, there is mutual transmutation between spinons and vortices during the thermal-cycling process, which yields the magnetic memory effect observed in experiments. We also propose a mechanism to stabilize chiral and nematic superconductivity in 4 H b − TaS 2 through the Kondo coupling of conduction electrons to the chiral QSL. Our picture suggests 4 H b − TaS 2 as an exciting platform to explore the interplay between QSL and superconductivity through the Kondo effect. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Interplay of 𝑑- and 𝑝-states in RbTi3⁢Bi5 and CsTi3⁢Bi5 flat-band kagome metals

Shifting the Fermi level of the celebrated 𝐴⁢𝑀3⁢𝑋5 (135) compounds into proximity of flat bands strongly enhances electronic correlations and severely affects the formation of density waves and superconductivity. Our broadband infrared spectroscopy measurements of RbTi3⁢Bi5 and CsTi3⁢Bi5 combined with density-functional band-structure calculations reveal that the correlated Ti 𝑑-states are intricately coupled with the Bi 𝑝-states that form a tilted Dirac crossing. Electron-phonon coupling manifests itself in the strong damping of itinerant carriers and in the anomalous shape of the phonon line in RbTi3⁢Bi5. An anomaly in these spectral features around 150 K can be paralleled to the onset of nematicity detected by low-temperature probes. Our findings show that the materials with low band filling open unexplored directions in the physics of kagome metals and involve electronic states of different nature strongly coupled with lattice dynamics.

Wenzel, Matthew [ORNL]↗
DOE OSTI2025

Odd-Parity Magnetism Driven by Antiferromagnetic Exchange

Realizing odd-parity, time-reversal-preserving, nonrelativistic spin splitting is a central goal for spintronics applications. We propose a group-theory-based microscopic framework to induce odd-parity spin splitting from coplanar antiferromagnetic (AFM) states without spin-orbit coupling (SOC). We develop phenomenological models for 421 conventional period-doubling AFM systems in nonsymmorphic space groups and construct minimal microscopic models for 119 of these. We find that these AFM states can attain three possible competing ground states. These ground states all break symmetries in addition to those broken by the usual AFM order. Specifically, they give rise to either odd-parity spin-splitting, nematic order, or scalar odd-parity order related to multiferroicity. Our microscopic theories reveal that the odd-parity spin-splitting energy scale is generically large and further reveal that the scalar odd-parity order gives a nonzero Berry curvature dipole without SOC. We identify 67 materials in the Magndata database for which our theory applies. We provide density-functional theory (DFT) calculations on Fe-based materials that reveal an ℎ-wave spin splitting consistent with our symmetry arguments and apply our microscopic model to determine the nonrelativistic Edelstein response for CeNiAsO.

Antiferromagnets↗
DOE OSTI2021

Aligned 2D carbon nanotube liquid crystals for wafer-scale electronics

Semiconducting carbon nanotubes promise faster performance and lower power consumption than Si in field-effect transistors (FETs) if they can be aligned in dense arrays. Here, we demonstrate that nanotubes collected at a liquid/liquid interface self-organize to form two-dimensional (2D) nematic liquid crystals that globally align with flow. The 2D liquid crystals are transferred onto substrates in a continuous process generating dense arrays of nanotubes aligned within ±6°, ideal for electronics. Nanotube ordering improves with increasing concentration and decreasing temperature due to the underlying liquid crystal phenomena. The excellent alignment and uniformity of the transferred assemblies enable FETs with exceptional on-state current density averaging 520 μA μm -1 at only -0.6 V, and variation of only 19%. FETs with ion gel top gates demonstrate subthreshold swing as low as 60 mV decade -1 . Deposition across a 10-cm substrate is achieved, evidencing the promise of 2D nanotube liquid crystals for commercial semiconductor electronics.

42 ENGINEERING↗
DOE OSTI2023

Strain-switchable field-induced superconductivity

Field-induced superconductivity is a rare phenomenon where an applied magnetic field enhances or induces superconductivity. Here, we use applied stress as a control switch between a field-tunable superconducting state and a robust non–field-tunable state. This marks the first demonstration of a strain-tunable superconducting spin valve with infinite magnetoresistance. We combine tunable uniaxial stress and applied magnetic field on the ferromagnetic superconductor Eu(Fe 0.88 Co 0.12 ) 2 As 2 to shift the field-induced zero-resistance temperature between 4 K and a record-high value of 10 K. We use x-ray diffraction and spectroscopy measurements under stress and field to reveal that strain tuning of the nematic order and field tuning of the ferromagnetism act as independent control parameters of the superconductivity. Combining comprehensive measurements with DFT calculations, we propose that field-induced superconductivity arises from a novel mechanism, namely, the uniquely dominant effect of the Eu dipolar field when the exchange field splitting is nearly zero.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Emergent tetragonality in a fundamentally orthorhombic material

Symmetry plays a key role in determining the physical properties of materials. By Neumann’s principle, the properties of a material remain invariant under the symmetry operations of the space group to which the material belongs. Continuous phase transitions are associated with a spontaneous reduction in symmetry. Less common are examples where proximity to a continuous phase transition leads to an increase in symmetry. We find signatures of an emergent tetragonal symmetry close to a charge density wave (CDW) bicritical point in a fundamentally orthorhombic material, ErTe 3 , for which the two distinct CDW phase transitions are tuned via anisotropic strain. We first establish that tension along the a axis favors an abrupt rotation of the CDW wave vector from the c to a axis and infer the presence of a bicritical point where the two continuous phase transitions meet. We then observe a divergence of the nematic elastoresistivity approaching this putative bicritical point, indicating an emergent tetragonality in the critical behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Fast and programmable locomotion of hydrogel-metal hybrids under light and magnetic fields

The design of soft matter in which internal fuels or an external energy input can generate locomotion and shape transformations observed in living organisms is a key challenge. Such materials could assist in productive functions that may range from robotics to smart management of chemical reactions and communication with cells. In this context, hydrated matter that can function in aqueous media would be of great interest. Here, we report the design of hydrogels containing a scaffold of high–aspect ratio ferromagnetic nanowires with nematic order dispersed in a polymer network that change shape in response to light and experience torques in rotating magnetic fields. The synergistic response enables fast walking motion of macroscopic objects in water on either flat or inclined surfaces and also guides delivery of cargo through rolling motion and light-driven shape changes. The theoretical description of the response to the external energy input allowed us to program specific trajectories of hydrogel objects that were verified experimentally.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Wide bandgap photoconductor (SiC:V)-based optically addressed light valve for high fluence operation

Optically addressable light valves based on wide bandgap 4H- and 6H-SiC as photoconductors were designed to withstand higher operational laser fluences than the state of-the-art bismuth silicon oxide (BSO; Bi 12 SiO 20 ) based devices. Vanadium-doped SiC was selected as the photoconductors due to their reasonable photoresponsivity while many fold improvement in laser induced damage threshold as compared to BSO. The laser induced damage threshold values of the materials were measured after exposing ~ 200 sites on the samples to increasing levels of fluence of a gaussian pulsed Nd: YAG laser system (1064 nm) with a 5 Hz repetition rate. The measured damage threshold values for BSO, 4H- and 6H-SiC were 0.4 J/cm 2 , 1.75 J/cm 2 and 1.8 J/cm 2 , respectively. Photoconductive switches based on 4H and 6H-SiC samples were characterized at wavelengths of 380 nm, 405 nm, and 447 nm. The peak photoresponsivity values of the 4H- and 6H-SiC materials were measured to be under 380 nm and 405 nm, respectively. The photoconductor was bonded to a BK7 optical window with 5 μm diameter microspheres as spacers. A twisted nematic type E7 liquid crystal (LC) was filled in the 5 μm gap in a vacuum chamber. The desired alignment of the liquid crystal was achieved by mutually orthogonal orientation of LC alignment layers on the two mating faces (SiC and BK7). The fabricated devices were modulated using address beams of wavelengths 380 nm, 405 nm, and 447 nm. In conclusion, required transmission levels of > 90% was achieved for the fabricated OALVs for a sinusoidal voltage waveform that meets the lifetime requirement of the device.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Plasmonic gold-cellulose nanofiber aerogels

Assembly of plasmonic nanomaterials into a low refractive index medium, such as an aerogel, holds a great promise for optical metamaterials, optical sensors, and photothermal energy converters. However, conventional plasmonic aerogels are opaque and optically isotropic composites, impeding them from being used as low-loss or polarization-dependent optical materials. Here we demonstrate a plasmonic-cellulose nanofiber composite aerogel that comprises of well-dispersed gold nanorods within a cellulose nanofiber network. The cellulose aerogel host is highly transparent owing to the small scattering cross-section of the nanofibers and forms a nematic liquid crystalline medium with strong optical birefringence. We find that the longitudinal surface plasmon resonance peak of gold nanorods shows a dramatic shift when probed for the cellulose aerogel compared with the wet gels. Simulations reveal the shift of surface plasmon resonance peak with gel drying can be attributed to the change of the effective refractive index of the gels. This composite material may provide a platform for three- dimensional plasmonic devices ranging from optical sensors to metamaterials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Final Technical Report for DE-FG02-86ER45268

This work addresses several key issues for understanding the unusual superconductivity in IBS, already shown to be technologically useful materials. 1a). Are reactive gasses like fluorine, chlorine, or water vapor behaving simply as electron donors to cause the superconductivity (at T conset =21 K) in undoped IBS like BaFe 2 As 2 ? 1b). Does exposure to fluorine increase T c in electron-doped IBS materials that are underdoped, e. g. Ba(Fe 0.96 Co 0.04 ) 2 As 2 ? 1c). Can fluorine as a reactive electron-donor, with its relatively greater ease of introduction into the lattice, be used as a rapid tool to search for superconductivity in new materials under investigation? Method of investigation: Using electron probe microanalysis, x-ray photoemission spectroscopy, and dynamical mean field theory calculations, we found that fluorine substitutes for As in the BaFe 2 As 2 lattice, and should therefore behave as an electron donor. We will F-dope Ba(Fe 0.96 Co 0.04 ) 2 As 2 and several new compounds under investigation for superconductivity upon doping to determine fluorine’s effect. Potential impact: If – like for fluorine - a brief exposure to hydrogen indeed causes superconductivity to a depth of 10 microns, this technique could be useful in creating long lengths of superconducting tape without the chemical aggressiveness of fluorine. Using the F ion, which substitutes for As - away from the Fe planes, in underdoped IBS like Ba(Fe 0.96 Co 0.04 ) 2 As 2 may form optimally doped IBS with less impurity scattering of the superconducting Fe 3d electrons resulting in improved superconducting properties. Another potential impact is the speed of checking for superconductivity in new materials under investigation for superconductivity upon doping. 2. What are the effects of Be substitution into IBS, beginning with FeSe and its derivatives (FeSe 1-x S x and FeSe 1-x Te x ) and BaFe 2-x Co x As 2 ? Method of investigation: We recently succeeded in adding Be to the FeSe lattice and found, surprisingly, a factor of four improvement of the low temperature residual resistivity ratio, consistent with improved electronic ordering. Using single crystal x-ray diffraction and x-ray dispersive spectroscopy, determine the concentration and location of the Be dopant. Using resistivity, determine if there is improvement in the residual resistivity achieved by Be doping in the FeSe derivatives (using AlCl 3 :KCl flux growth) and Co-doped BaFe 2 As 2 (using self-flux single crystal growth). Measuring resistivity under strain, determine the changes of the nematic susceptibility at the structural ordering transition causes by the increase in electronic order caused by Be doping in FeSe. Potential impact: Further understanding of IBS, including FeSe which - under physical pressure - has a T c increase to 40 K and -prepared as a monolayer - has a T c reported to be over 100 K. 3. In collaboration, prepare light atom compounds involving Be and look for high pressure-induced superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Command of active and responsive elastomers by topological defects and patterns

The project resulted in the development of stimuli-responsive elastomer coatings formed by photopolymerized liquid crystal molecules. The molecular orientation of the liquid crystal elastomers is coupled to rubber-like elasticity. The project developed an approach to produce complex patterns of molecular orientation in elastomers by employing photopatterning technique based on plasmonic metamasks that convert unpolarized incoming light into a transmitted light beam with spatially-varying linear polarization. The polarization-modulated light beam aligns the film of azodye molecules, which serves as the substrate for liquid crystal elastomer coating. The alignment of the azodye molecules follows the polarization pattern with a phase shift of the alignment direction by 90 degrees. The azodye substrate imposes orientation of molecules in the adjacent liquid crystal layer which is preserved after the monomers are polymerized into a liquid crystal elastomer. By using differently aligned substrates one could produce various patterns of molecular orientation in the elastomer, which dictate the mechanical properties of the elastomers and their response to external stimuli such as temperature, humidity, and ultraviolet irradiation. In particular, the predesigned molecular orientation produces deterministically defined topography response of the liquid crystal coatings, in which their free surface changes from flat to either locally elevated or locally compressed, depending on whether the pre-inscribed molecular orientation is predesigned with a splay or bend deformation. The research established that the mechanism of this deterministic relation between the dynamic topography and pre-inscribed molecular orientation is rooted in the change of the tensorial order parameter that characterizes the degree of orientational order, and in the contraction/expansion of polymer molecules in response to the order parameter changes. In particular, lowering the order causes contraction of polymer globules. The work demonstrated that the dynamic topography of elastomer coatings with three-dimensional pattern of orientational order includes up and down motion of the material (along the normal to the coating) and also shifts in lateral directions. We demonstrate that the deterministic relationship between the orientational patterns and variations of coatings’ profile is caused by forces that are mathematically equivalent to active forces in the system of “pullers” or “pushers” in active matter, demonstrating universality of the out-of-equilibrium behavior. The project resulted in theoretical models that predictively describe the dynamic response of coatings. The topography of liquid crystal elastomers is sensitive to stimuli such as temperature, ultraviolet irradiation, and humidity. The applicability of the patterned approach to produce dynamic coatings was expanded from nematic elastomers to their smectic counterparts. The project combined a battery of imaging techniques to unveil the dynamic properties of the coatings, ranging from the state-of-the-art dynamic holographic microscopy to fluorescent confocal polarizing microscopy and polscope microscopy. The research uncovered potential applications of dynamic elastomer coatings, such as control placement of colloidal particles, engineering of living tissues with alignment patterns of cells that follow the orientational order of elastomer coatings. The approach developed in the project can be used to design programmable dynamic coatings with functionalities that mimic biological tissues such as skin.

36 MATERIALS SCIENCE↗