Search NASA⌕ Search

SEARCH · Search NASA

Results for “numerical diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Charge Transport and Space-Charge Formation in Cd 1 - x Zn x Te 1 - y Se y Radiation Detectors

The electron- and hole-transport properties in cadmium zinc telluride selenide (CZTS) crystals are studied using a laser-induced transient-current technique with pulsed and dc bias. The internal electric field profile and velocity of surface recombination are determined by Monte Carlo simulations of electron and hole transient currents combined with a numerical solution of the drift-diffusion equation coupled with Poisson’s equation. Electron and hole drift mobilities of μe = 830 cm 2 /Vs and μh = 40 cm 2 /Vs, respectively, are determined. We also develop a simple technique for evaluating surface recombination directly from measured current waveforms without the need for numerical simulation. The good quality of the prepared detector at pulsed bias, with electron- and hole-mobility-lifetime products of (μτ)e = 1.9 × 10 -3 cm 2 /V and (μτ)h = 1.4 × 10 -4 cm 2 /V, respectively, are observed. The formation of a positive space charge, originating from hole injection combined with a recombination level, is found. We observe a significant position dependence of the lifetime of electrons and holes in dc bias due to hole injection. The experiment is successfully fitted by a simple model dominated by a single deep recombination level with an energy of E t =E C -0.73eV; concentration of 7.3 × 10 11 cm -3 ; and electron- and hole-capture cross sections of 3.5 × 10 -14 cm 2 and 6.5 × 10 -14 cm 2 , respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature-Dependent Short-Circuit Capability of Silicon Carbide Power MOSFETs

Our paper presents a comprehensive short-circuit ruggedness evaluation and numerical investigation of up-to-date commercial silicon carbide (SiC) MOSFETs. The short-circuit capability of three types of commercial 1200-V SiC MOSFETs is tested under various conditions, with case temperatures from 25 to 200 degrees C and dc bus voltages from 400 to 750 V. It is found that the commercial SiC MOSFETs can withstand short-circuit current for only several microseconds with a dc bus voltage of 750 V and case temperature of 200 degrees C. Moreover, the experimental short-circuit behaviors are compared, and analyzed through numerical thermal dynamic simulation. Specifically, an electrothermal model is built to estimate the device internal temperature distribution, considering the temperature-dependent thermal properties of SiC material. Based on the temperature information, a leakage current model is derived to calculate the main leakage current components (i.e., thermal, diffusion, and avalanche generation currents). Finally, numerical results show that the short-circuit failure mechanisms of SiC MOSFETs can be thermal generation current induced thermal runaway or high-temperature-related gate oxide damage.

4H↗

Positive column of a glow discharge in neon with charged dust grains (a review)

The effect of charged micron-size dust grains (microparticles) on the electric parameters of the positive column of a low-pressure dc glow discharge in neon has been studied experimentally and numerically. Numerical analysis is carried out in the diffusion-drift approximation with allowance for the interaction of dust grains with metastable neon atoms. In a discharge with a dust grain cloud, the longitudinal electric field increases. As the number density of dust grains in an axisymmetric cylindrical dust cloud rises, the growth of the electric field saturates. It is shown that the contribution of metastable atoms to ionization is higher in a discharge with dust grains, in spite of the quenching of metastable atoms on dust grains. The processes of charging of dust grains and the dust cloud are considered. As the number density of dust grains rises, their charge decreases, while the space charge of the dust cloud increases. The results obtained can be used in plasma technologies involving microparticles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transient spatiotemporal chaos in the Morris-Lecar neuronal ring network

Transient behavior is thought to play an integral role in brain functionality. Numerical simulations of the firing activity of diffusively coupled, excitable Morris-Lecar neurons reveal transient spatiotemporal chaos in the parameter regime below the saddle-node on invariant circle bifurcation point. The neighborhood of the chaotic saddle is reached through perturbations of the rest state, in which few initially active neurons at an effective spatial distance can initiate spatiotemporal chaos. The system escapes from the neighborhood of the chaotic saddle to either the rest state or to a state of pulse propagation. The lifetime of the chaotic transients is manipulated in a statistical sense through a singular application of a synchronous perturbation to a group of neurons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of the Soret effect on binary-species boundary layers at high pressure

Direct numerical simulations of binary-species temporal boundary layers at high pressure are performed. The main objective is to investigate the influence of the Soret effect on flow physics of binary-species boundary layers where the fluid has a uniform composition. The working fluid is a mixture of 25 % methane and 75 % nitrogen in mass fraction. Although the fluid composition is uniform at the initial condition, the mass fraction of methane increases near the wall when the wall temperature is hotter than the free stream temperature, whereas it decreases when the wall temperature is colder. The non-uniform mass fraction indicates that the uphill diffusion occurs near the wall. Investigation of fluctuations of the mass fraction reveals that the mass fraction fluctuates in the whole boundary layer, indicating that the uphill diffusion occurs even far from the wall. Examination of the species-mass diffusion balance for mean flow fields clarified that the Soret effect flux becomes large near the wall, and the large flux causes the non-uniform profile of the mass fraction near the wall.

Binary Diffusion Coefficient↗

Basis adaptation and domain decomposition for steady-state partial differential equations with random coefficients

We present a novel approach for solving steady-state stochastic partial differential equations in high-dimensional random parameter space. The proposed approach combines spatial domain decomposition with basis adaptation for each subdomain. The basis adaptation is used to address the curse of dimensionality by constructing an accurate low-dimensional representation of the stochastic PDE solution (probability density function and/or its leading statistical moments) in each subdomain. Restricting the basis adaptation to a specific subdomain affords finding a locally accurate solution. Then, the solutions from all of the subdomains are stitched together to provide a global solution. We support our construction with numerical experiments for a steady-state diffusion equation with a random spatially dependent coefficient. Our results show that accurate global solutions can be obtained with significantly reduced computational costs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical prediction of ion current from a small methane jet flame

This paper compares numerical simulations with experiments to describe the underlying mechanisms responsible for the voltage-current characteristic (VCC) response of a capillary-fed methane diffusion flame in an electric field. The numerical simulations, which include both combustion and electric phenomena, show good agreement with previously published experimental results, though computed flame temperatures were higher than those experimentally measured. Sub-saturated, saturated and super-saturated ion current regions are shown in the range of applied potentials: 0-2.5 kV, 2.5-3.4 kV and over 3.4 kV, respectively. The transition between the sub-saturated and saturated region is explored by predicting an evolution of the H{sub 3}O{sup +} ion profile. Furthermore, the transition between the saturated and super-saturated current region is considered by following the rate of ion production. The simulations show an enhancement of ion production at high voltages suggesting that the main factor behind the increased ion production is the entrainment of air by the ion-driven wind into the fuel jet before the reaction zone, producing a partially premixed flame. Additionally, the change in chemical reaction pathways as a result of air entrainment is discussed. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and numerical study of the effects of solution concentration and temperature on concrete under external sulfate attack

The work reports on an experimental programme, conducted to validate comprehensively our previously proposed coupled chemo-transport model for external sulfate attack on concrete. Specifically, the effects of the concentration of sulfate solution and temperature on the distribution of sulfate ions in concrete are experimentally investigated and used to demonstrate the accuracy of the modeling framework. Further, the profile of aluminate depletion and the leaching depth numerically are investigated. For all cases the model predictions are in good agreement with the experimental results, showing increases of the concentration of sulfate ions in concrete with higher concentrations of sulfate solution and higher temperatures. It is concluded that higher sulfate solution concentration and temperature enhance the processes involved in the external sulfate attack on concrete, namely diffusion of sulfate ions and their chemical reactions with concrete. It is found that these parameters affect the external sulfate attack predominantly via the chemical reaction process.

36 MATERIALS SCIENCE↗

Development of a Novel Accelerator for Neutron Transport Solution Using the Galerkin Spectral Element Methods (Final Report)

This report summarizes the results of a three-year research project sponsored by the U.S. Department of Energy (DOE) Nuclear Energy University Program (NEUP) to develop and implement advanced acceleration schemes for the DOE NEAMS neutronics code PROTEUSSN. The project team included the University of Massachusetts Lowell, The Ohio State University, University of Michigan, and Argonne National Laboratory. The PROTEUS code is a high-fidelity capable deterministic neutron transport code based on unstructured finite element meshes, which solves the steady-state and transient neutron transport problem using the 2nd-order discrete ordinate method (SN2ND), the method of characteristics (MOC), and the advanced nodal transport method (NODAL). The DSA scheme has been implemented in PROTEUS to speed up SN transport calculations. The existing DSA scheme employs a consistent finite element formulation on the same fine mesh structure as the SN solution While the use of consistent discretizations makes the DSA method effective, it does not necessarily make it efficient because the numerical solution of a discretized elliptic diffusion problem itself can be costly, particularly when the problem size becomes large. We developed a new discontinuous Galerkin (DG) discretization of the diffusion equation, called DG-DSA, which can effectively and efficiently accelerate the SN transport iterations. As compared with the previous work, the novelty of our method is that the diffusion equation is solved on a coarse-mesh grid using the DG methods, and the DG diffusion discretization incorporates local hp adaptation, i.e., local adaptation of mesh size and/or polynomial degree, based on local total cross section (or optical thickness). Therefore, the resulting number of degrees of freedom (DOF) of the DG discretization is much less than the conventional consistent DSA discretizations, and thus DG-DSA can achieve significant improvement in computational efficiency. We implemented this scheme in PROTEUS-SN. In addition, we developed a new stabilization scheme named linear prolongation CMFD (lpCMFD). A novel feature of this scheme is that the conventional flat flux ratio–based scaling approach is replaced with a linear interpolation of the scalar flux differences at the coarse-mesh cell edges between the neutron transport and CMFD calculations. Fourier convergence analysis and numerical results show that lpCMFD is unconditionally stable and more effective than other CMFD based on acceleration schemes such as pCMFD, odCMFD. We also developed a new nonlinear diffusion acceleration scheme for solving neutron transport equations. This scheme, called LR-NDA, employs a local refinement approach on the framework of CMFD by solving a local boundary value problem of the scalar flux on the coarse-mesh structure to replace the piecewise constant scalar flux obtained by CMFD. The refined flux is then used to update the scalar flux in the neutron transport source iteration. It has been demonstrated that that LR-NDA is much more effective and stable than CMFD for a wide range of optical thicknesses. LR-NDA is a local adaptive method, which means LR-NDA does not necessarily require local refinement for all the coarse-mesh cells on the problem domain, i.e., it can be used only for relatively optically thick regions where the standard CMFD scheme would encounter the convergence problem.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fluid–Solid Reaction Kinetics for Solids of Nonbasic Geometries and Determination of the Appropriate Shape Factors

The rate analysis involving a solid of nonbasic geometry in general requires a complex numerical solution. A closed-form expression of the reaction rate for such a solid would be very convenient and greatly simplify the analysis. A method for this purpose was developed in this work for solids with shapes of finite cylinders and finite rectangular parallelepipeds reacting under the rate control by chemical reaction or mass transfer, which may be extended to other irregular shapes. In this method, an appropriate shape factor is first obtained under the conditions of a topochemical reaction, which is then applied to the unified rate expressions previously obtained for solids of three basic shapes. Good agreements between the rates predicted with the appropriate shape factors and the exact or numerical solutions were obtained for both reaction-controlled and pore-diffusion-controlled reactions.

36 MATERIALS SCIENCE↗

Comparison of analytic models of instability of rarefied gas flow in a channel

Numerical and analytical results are compared concerning the limit properties of the trajectories, attractors and bifurcations of rarefied gas flows in channels. The cascade of bifurcations obtained in our previous analytical and numerical investigations is simulated numerically for different scattering functions V generalizing the ray-diffuse reflection of gas particles from the surface. The main purpose of numerical simulation by Monte Carlo method is the investigation of the properties of different analytic nonlinear dynamic systems corresponding to rarefied gas flow in a channel. The results are compared as well for the models suggested originally by R. N. Miroshin, as for the approximations considered for the first time or for studied in our subsequent papers. Analytical solutions we obtained earlier for the ray reflection which means only one determined velocity of scattered from the walls gas atoms, generally different from the specular reflection. The nonlinear iterative equation describing a rarefied gas flow in a long channel becomes unstable in some regions of corresponding parameters of V (it means the sensitivity to boundary conditions). The values of the parameters are found from analytical approximations in these regions. Numerical results show that the chaotic behavior of the nonlinear dynamic system corresponds to strange attractors and distinguishes clearly from Maxwellian distribution and from the equilibrium on the whole. In the regions of instability (as the dimension of the attractor increases) the search for a corresponding state requires a lot more computation time and a lot of data (the amount of data required increases exponentially with embedding dimension). Therefore the main complication in the computation is reducing as well the computing time as the amount of data to find a suitably close solution. To reduce the computing time our analytical results are applied. Flow conditions satisfying the requirements to the experiment are indicated where the instability of considered type can be detected. The advantages and the drawbacks of considered approximations are detected and the features of obtained solutions are indicated. The recommendations are given for applying the results in practical applications and in numerical calculations of rarefied gas flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diffusion coefficient of three-dimensional Yukawa liquids

The purpose of this work is an investigation of the diffusion coefficient of the dust component in complex plasma. The computer simulation of the Yukawa liquids was made on the basis of the Langevin equation, which takes into account the influence of buffer plasma on the dust particles dynamics. The Green–Kubo relation was used to calculate the diffusion coefficient. Calculations of the diffusion coefficient for a wide range of the system parameters were performed. Using obtained numerical data, we constructed the interpolation formula for the diffusion coefficient. We also show that the interpolation formula correctly describes experimental data obtained under microgravity conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Novel type of chimera spiral waves arising from decoupling of a diffusible component

Spiral waves composed of coherent traveling waves surrounding a core containing stochastically distributed stationary areas are found in numerical simulations of a three-variable reaction-diffusion system with one diffusible species. In the spiral core, diffusion of this component (w) mediates transitions between dynamic states of the subsystem formed by the other two components, whose dynamics is more rapid than that of w. Diffusive coupling between adjacent sites can be “on” or “off” depending on the subsystem state. The incoherent structures in the spiral core are produced by this decoupling of the slow diffusive component from the fast non-diffusing subsystem. The phase diagram reveals that the region of incoherent behavior in chimera spirals grows drastically, leading to modulation and breakup of the spirals, in the transition zones between 1{sup n-1} and 1{sup n} local mixed-mode oscillations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A THEORY OF PHOTOSPHERIC EMISSION FROM RELATIVISTIC OUTFLOWS

We derive the optical depth and photospheric radius of relativistic outflows using a model of a relativistic wind with a finite duration. We also discuss the role of radiative diffusion in such an outflow. We numerically solve the radiative transfer equation and obtain light curves and observed spectra of the photospheric emission. The spectra we obtain are nonthermal and in some cases have Band shapes.

79 ASTRONOMY AND ASTROPHYSICS↗

Analytical homogenization techniques applied to the Fickian diffusion: Effective diffusivity coefficient

For multiple applications in nuclear energy, the ability to accurately represent material behavior with a simplified model is important to facilitate practical engineering-scale simulations. In this work, we focus on the homogenized thermal response of a medium containing spherical inclusions, similar to a fuel form (compact or pebble) containing TRISO particles. An extensive survey on effective thermal conductivity modeling was performed in our previous study, considering a random distribution of mono-sized spherical inclusions in a continuous matrix. Using the analogy between heat conduction and the simplified Fickian diffusion (or fission product species conservation), we can use the same analytical homogenization methods to obtain ETC as for the effective diffusivity coefficient (EDC). We performed several numerical experiments at varying conditions to assess the validity of our hypothesis for EDC calculations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Homogenization method based on the inverse problem

We present a method for deriving homogeneous multi-group cross sections to replace a heterogeneous region's multi-group cross sections; providing that the fluxes and the currents on the external boundary, and the region averaged fluxes are preserved. The method is developed using diffusion approximation to the neutron transport equation in a symmetrical slab geometry. Assuming that the boundary fluxes are given, two response matrices (RMs) can be defined. The first derives the boundary current from the boundary flux, the second derives the flux integral over the region from the boundary flux. Assuming that these RMs are known, we present a formula which reconstructs the multi-group cross-section matrix and the diffusion coefficients from the RMs of a homogeneous slab. Applying this formula to the RMs of a slab with multiple homogeneous regions yields a homogenization method; which produce such homogenized multi-group cross sections and homogenized diffusion coefficients, that the fluxes and the currents on the external boundary, and the region averaged fluxes are preserved. The method is based on the determination of the eigenvalues and the eigenvectors of the RMs. We reproduce the four-group cross section matrix and the diffusion constants from the RMs in numerical examples. We give conditions for replacing a heterogeneous region by a homogeneous one so that the boundary current and the region-averaged flux are preserved for a given boundary flux. (authors)

97 MATHEMATICS AND COMPUTING↗

NON-RELATIVISTIC RADIATION-MEDIATED SHOCK BREAKOUTS. I. EXACT BOLOMETRIC PLANAR BREAKOUT SOLUTIONS

The problem of a non-steady planar radiation-mediated shock (RMS) breaking out from a surface with a power-law density profile, {rho}{proportional_to}x{sup n} , is numerically solved in the approximation of diffusion with constant opacity. For an appropriate choice of time, length, and energy scales, determined by the breakout opacity, velocity, and density, the solution is universal, i.e., depends only on the density power-law index n. The resulting luminosity depends weakly on the value of n. An approximate analytic solution, based on the self-similar hydrodynamic solutions and on the steady RMS solutions, is constructed and shown to agree with the numerical solutions as long as the shock is far from the surface, {tau} >> c/v{sub sh}. Approximate analytic expressions, calibrated based on the exact solutions, are provided, which describe the escaping luminosity as a function of time. These results can be used to calculate the bolometric properties of the bursts of radiation produced during supernova shock breakouts. For completeness, we also use the exact breakout solutions to provide an analytic approximation for the maximum surface temperature for fast (v{sub sh} {approx}> 0.1) non-thermal breakouts and show that it is a few times smaller than inferred based on steady state RMS solutions.

79 ASTRONOMY AND ASTROPHYSICS↗

Phonons, Diffusons, and the Boson Peak in Two-Dimensional Lattices with Random Bonds

Within the model of stable random matrices possessing translational invariance, a two-dimensional (on a square lattice) disordered oscillatory system with random strongly fluctuating bonds is considered. By a numerical analysis of the dynamic structure factor S(q, ω), it is shown that vibrations with frequencies below the Ioffe-Regel frequency ω{sub IR} are ordinary phonons with a linear dispersion law ω(q) ∝ q and a reciprocal lifetime δ~ q{sup 3}. Vibrations with frequencies above ω{sub IR}, although being delocalized, cannot be described by plane waves with a definite dispersion law ω(q). They are characterized by a diffusion structure factor with a reciprocal lifetime δ ~ q{sup 2}, which is typical of a diffusion process. In the literature, they are often referred to as diffusons. It is shown that, as in the three-dimensional model, the boson peak at the frequency ωb in the reduced density of vibrational states g(ω)/ω is on the order of the frequency ω{sub IR}. It is located in the transition region between phonons and diffusons and is proportional to the Young’s modulus of the lattice, ω{sub b}≃E.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗