Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxidation state analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Rare Earth and Transition Metal Containing Glasses

Transition metal (TM) and rare earth (RE) ions have been incorporated into many glass systems such as silicate, phosphate, and borosilicate-based oxide glasses, as well as in halide and chalcogenide glasses, that find applications ranging from optical, photonic, and magnetic devices, solid-state battery, to nuclear waste disposal. Understanding the structural role of RE and TM in these glasses can help to develop glass compositions for targeted applications with either high-optical emission efficiency, electrical conductivity, or chemical durability. In this chapter, we first provide a general introduction of the applications and structural features of RE and TM in glasses, then the critical aspects of molecular dynamics (MD) simulations of these glasses such as interatomic potentials, structural analysis tools to study RE and TM ions in glasses and their clustering behaviors, Quantitative Structure–Property Analysis (QSPR), diffusion and dynamic property calculations, and electronic structure calculations to understand electronic defects such as charge trapping and radiation effects are introduced. Three representative case studies are presented: the first one is on MD simulations of erbium- and europium-doped silica and silicate glasses, as well as cerium doped aluminophosphate glasses, that revealed the effect of glass composition on RE ion local structure and clustering behavior. Electronic structure calculations of cerium-doped glass show how the existence of multioxidation states help to mediate radiation-induced damages caused by excited electron–hole pairs was also discussed. The second one focuses on alkali vanadophosphate glasses where the existence of two vanadium oxidation states help to provide electronic conduction in the glasses while alkali ions provide ionic conduction. MD simulations were used to understand vanadium environments and other structural aspects in the phosphate glasses, as well as the ionic transport behaviors of alkali ions. The third case study is on zirconium-containing borosilicate and aluminosilicate glasses that find wide applications in nuclear waste disposal. MD simulations help to provide structural details of zirconium ions that are validated by diffraction and EXAFS spectra. The structural information was used to interpret changes of mechanical properties and chemical durability by using QSPR and other analyses-based MD-generated structure models.

Du, Jincheng↗
DOE OSTI2022

Charge ordering in Ir dimers in the ground state of Ba 5 AlIr 2 O 11

It has been well established experimentally that the interplay of electronic correlations and spin-orbit interactions in Ir 4+ and Ir 5+ oxides results in insulating J eff = 1/2 and J eff = 0 ground states, respectively. However, in compounds where the structural dimerization of iridium ions is favorable, the direct Ir d-d hybridization can be significant and takes a key role. Here, in this study, we investigate the effects of direct Ir d-d hybridization in comparison with electronic correlations and spin-orbit coupling in Ba 5 AlIr 2 O 11 , a compound with Ir dimers. Using a combination of ab initio many-body wave-function quantum chemistry calculations and resonant inelastic x-ray scattering experiments, we elucidate the electronic structure of Ba 5 AlIr 2 O 11 . We find excellent agreement between the calculated and the measured spin-orbit excitations. Contrary to expectations, the analysis of the many-body wave function shows that the two Ir (Ir 4+ and Ir 5+ ) ions in the Ir 2 O 9 dimer unit in this compound preserve their local J eff character close to 1/2 and 0, respectively. The local point group symmetry at each of the Ir ions plays an important role, significantly limiting the direct d-d hybridization. Our results emphasize that minute details in the local crystal field environment can lead to dramatic differences in the electronic states in iridates and 5d oxides in general.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Design, Analysis, Comparison, and Experimental Validation of Insulated Metal Substrates for High-Power Wide-Bandgap Power Modules

Direct bonded copper (DBC) substrates used in power modules have limited heat spreading and manufacturing capability due to ceramic properties and manufacturing technology. The ceramic and copper bonding is also subject to high mechanical stress due to coefficient of thermal expansion mismatch between the copper and the ceramic. For wide-bandgap (WBG) devices, it is of interest exploring new substrate technologies that can overcome some of the challenges of direct bonded copper substrates. In this technical paper, the design, analysis, and comparison of insulated metal substrates (IMSs) for high-power wide-bandgap semiconductor-based power modules are discussed. This paper starts with technical description and discussion of state-of-the-art DBC substrates with different ceramic insulators such as aluminum nitride (AlN), Al 2 O 3 , and Si 3 N 4 . Next, an introduction of IMSs and their material properties, and a design approach for SiC (silicon carbide) metal-oxide-semiconductor field-effect transistor (MOSFET)-based power modules for high-power applications is provided. The influence of dielectric thickness on the power handling capability of the substrate are also discussed. The designed IMS and DBC substrates were characterized in terms of steady-state and transient thermal performance using finite element simulation. Finally, the performance of the IMS and DBC are validated in an experimental setup under different loading and cooling temperature conditions. We report the simulation and experimental results showed that the IMS can provide high steady-state thermal performance for high-power modules based on SiC MOSFETs. Furthermore, the IMS provided enhanced transient thermal performance, which provided a reduced junction temperature when the module is operated at low fundamental output frequencies in traction drive systems.

42 ENGINEERING↗
DOE OSTI2020

A New Family of Proton‐Conducting Electrolytes for Reversible Solid Oxide Cells: BaHf x Ce 0.8− x Y 0.1 Yb 0.1 O 3− δ

Abstract Reversible solid oxide cells based on ceramic proton conductors have potential to be the most efficient system for large‐scale energy storage. The performance and long‐term durability of these systems, however, are often limited by the ionic conductivity or stability of the proton‐conducting electrolyte. Here new family of solid oxide electrolytes, BaHf x Ce 0.8− x Y 0.1 Yb 0.1 O 3− δ (BHCYYb), which demonstrate a superior ionic conductivity to stability trade‐off than the state‐of‐the‐art proton conductors, BaZr x Ce 0.8− x Y 0.1 Yb 0.1 O 3− δ (BZCYYb), at similar Zr/Hf concentrations, as confirmed by thermogravimetric analysis, Raman, and X‐ray diffraction analysis of samples over 500 h of testing are reported. The increase in performance is revealed through thermodynamic arguments and first‐principle calculations. In addition, lab scale full cells are fabricated, demonstrating high peak power densities of 1.1, 1.4, and 1.6 W cm −2 at 600, 650, and 700 °C, respectively. Round‐trip efficiencies for steam electrolysis at 1 A cm −2 are 78%, 72%, and 62% at 700, 650, and 600 °C, respectively. Finally, CO 2 H 2 O electrolysis is carried out for over 700 h with no degradation.

Murphy, Ryan↗
DOE OSTI2023

Impact of heating and cooling loads on battery energy storage system sizing in extreme cold climates

Efficient operation of battery energy storage systems requires that battery temperature remains within a specific range. Current techno-economic models neglect the parasitic loads heating and cooling operations have on these devices, assuming they operate at constant temperature. In this work, these effects are investigated considering the optimal sizing of battery energy storage systems when deployed in cold environments. Here, a peak shaving application is presented as a linear programming problem which is then formulated in the PYOMO optimization programming language. The building energy simulation software EnergyPlus is used to model the heating, ventilation, and air conditioning load of the battery energy storage system enclosure. Case studies are conducted for eight locations in the United States considering a nickel manganese cobalt oxide lithium ion battery type and whether the power conversion system is inside or outside the enclosure. The results show an increase of 42% to 300% in energy capacity size, 43% to 217% in power rating, and 43% to 296% increase in capital cost dependent on location. This analysis shows that the heating, ventilation, and air conditioning load can have a large impact on the optimal sizes and cost of a battery energy storage system and merit consideration in techno-economic studies.

25 ENERGY STORAGE↗
DOE OSTI2022

Unusual aliovalent doping effects on oxygen non-stoichiometry in medium-entropy compositionally complex perovskite oxides

Aliovalent doping of perovskite oxides can tune the oxygen vacancy formation energy. This work discovers normal vs. abnormal aliovalent doping effects on redox behaviors in medium-entropy compositionally complex perovskite oxides (CCPOs) (La 1–x Sr x )(Mn 1/3 Fe 1/3 Ti 1/3 )O 3–δ (LS_MFT) vs. (La 1–x Sr x )(Mn 1/3 Fe 1/3 Cr 1/3 )O 3–δ (LS_MFC). In the LS_MFC series, the oxygen non-stoichiometry range Δδ (= δ red – δ ox ) linearly depends on the Sr molar ratio x, while the LS_MFT series shows a V-shape dependence of Δδ on x. This unusual observation is investigated and explained based on the analysis of the energy loss near edge structure (ELNES) in STEM electron energy loss spectroscopy, along with density functional theory (DFT) calculations. In LS_MFC, Cr–L 2,3 , Mn–L 2,3 and Fe–L 2,3 peaks have a similar linear shift to higher energy with increasing x, which indicates higher oxidation states of Cr, Mn, and Fe with lower oxygen vacancy formation energies. In LS_MFT, the V-shape of the Δδ vs. x curve is caused by the stable Ti 4+ state and a V-shape Mn/Fe valency dependence on x. Furthermore, this study suggests the possible existence of different (including unexpected) coupled aliovalent doping effects in CCPOs with multiple B-site redox active elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1972

Mechanisms of oxidation in the Co-Cr system.

Oxidation has been studied both as a function of temperature in the range from 900 to 1300 C and of the partial pressure of oxygen in the range from 0.05 to 760 torr. In addition, microstructures of oxide scales have been studied and characterized in more detail utilizing metallographic and X-ray techniques combined with electron microprobe analysis. The parabolic rate constants in 1100 C and at 100 and 10 torr oxygen are presented in a graph as a function of chromium content. Three main different mechanisms of oxidation in the Co-Cr system have been identified. In two of these, the rate determining process controlling the oxidation is the solid state diffusion of cobalt through the oxide CoO. The rate controlling process governing the oxidation for the third mechanism is chromium diffusion in dichromium trioxide.

Kofstad, P. K.↗
DOE OSTI2022

Synchrotron-based techniques for characterizing STCH water-splitting materials

Understanding the role of oxygen vacancy–induced atomic and electronic structural changes to complex metal oxides during water-splitting processes is paramount to advancing the field of solar thermochemical hydrogen production (STCH). The formulation and confirmation of a mechanism for these types of chemical reactions necessitate a multifaceted experimental approach, featuring advanced structural characterization methods. Synchrotron X-ray techniques are essential to the rapidly advancing field of STCH in part due to properties such as high brilliance, high coherence, and variable energy that provide sensitivity, resolution, and rapid data acquisition times required for the characterization of complex metal oxides during water-splitting cycles. X-ray diffraction (XRD) is commonly used for determining the structures and phase purity of new materials synthesized by solid-state techniques and monitoring the structural integrity of oxides during water-splitting processes (e.g., oxygen vacancy–induced lattice expansion). X-ray absorption spectroscopy (XAS) is an element-specific technique and is sensitive to local atomic and electronic changes encountered around metal coordination centers during redox. While in operando measurements are desirable, the experimental conditions required for such measurements (high temperatures, controlled oxygen partial pressures, and H 2 O) practically necessitate in situ measurements that do not meet all operating conditions or ex situ measurements. Here, we highlight the application of synchrotron X-ray scattering and spectroscopic techniques using both in situ and ex situ measurements, emphasizing the advantages and limitations of each method as they relate to water-splitting processes. The best practices are discussed for preparing quenched states of reduction and performing synchrotron measurements, which focus on XRD and XAS at soft (e.g., oxygen K-edge, transition metal L-edges, and lanthanide M-edges) and hard (e.g., transition metal K-edges and lanthanide L-edges) X-ray energies. The X-ray absorption spectra of these complex oxides are a convolution of multiple contributions with accurate interpretation being contingent on computational methods. The state-of-the-art methods are discussed that enable peak positions and intensities to be related to material electronic and structural properties. Through careful experimental design, these studies can elucidate complex structure–property relationships as they pertain to nonstoichiometric water splitting. A survey of modern approaches for the evaluation of water-splitting materials at synchrotron sources under various experimental conditions is provided, and available software for data analysis is discussed.

08 HYDROGEN↗
DOE OSTI2023

Techno-Economic Analysis of a Thermally Integrated Solid Oxide Fuel Cell and Compressed Air Energy Storage Hybrid System

Natural-gas-fueled solid oxide fuel cell (SOFC) systems have the potential for high-efficiency conversion of carbon to power due to the underlying electrochemical conversion process while readily facilitating carbon capture through the separation of the fuel and oxidant sources. Compressed air energy storage (CAES) technology can potentially store significant quantities of energy for later use with a high round-trip efficiency and lower cost when compared with state-of-the-art battery technology. The base load generation capability of SOFC can be coupled with CAES technology to provide a potentially flexible, low-carbon solution to meet the fluctuating electricity demands imposed by the increasing share of intermittent variable renewable energy (VRE) production. SOFC and CAES can be hybridized through thermal integration to maximize power output during periods of high electrical demand and then store power when either demand is low or renewable generation reduces power prices. The techno-economics of a low-carbon hybrid SOFC and CAES system was developed and investigated in the present study. The proposed hybrid system was found to be cost-competitive with other power-generating base-load facilities when power availability was considered. The hybrid system shows increased resilience to changes in a high VRE grid market scenario.

25 ENERGY STORAGE↗
DOE OSTI2026

Raman spectroscopic investigation of ianthinite [U$_2^{4+}$(UO$_2$)$_4$O$_6$(OH)$_4$(H$_2$O)$_4$]·$5$H$_2$O, a rare mixed-valence uranium oxide hydrate

Ianthinite ([[U$_2^{4+}$(UO$_2$)$_4$O$_6$(OH)$_4$(H$_2$O)$_4$]·$5$H$_2$O) is an exotic mineral that possesses U in both tetravalent and hexavalent oxidation states and is structurally related to the U 3 O 8 polymorphs, which are commonly encountered technogenic materials in the nuclear fuel cycle. Despite the similarities between U 3 O 8 and ianthinite, and the importance of ianthinite in U paragenesis, no Raman spectra have been reported for this mineral. Here, to gain a more complete understanding of how structural attributes of ianthinite give rise to observable spectroscopic features and how these may relate to important materials in the nuclear fuel cycle, we provide, for the first time, Raman spectra of ianthinite. Ianthinite readily oxidizes at ambient conditions, complicating analysis of phase-pure material. Several analytical methods are employed herein to decouple the Raman features of ianthinite from its alteration product(s). First, a simple difference spectrum is presented, then results of Raman spectroscopic mapping are employed, and finally, we use a novel processing and analysis method. Each analysis method provides different insight into structural features that are unique to ianthinite, in particular, features that are attributable to U(IV) in distorted octahedral coordination in both ianthinite and U 3 O 8 phases.

Spano, Tyler L. [Oak Ridge National Laboratory (OR↗
NASA NTRS1973

Optical and chemical analysis of iron in Luna 20 plagioclase.

Review of analytical data on the iron content of Luna 20 anorthitic plagioclase, obtained by a highly sensitive technique for measuring polarized absorption related to crystal-field splittings and by automated electron microprobe analysis of oriented single crystals. The iron content is found to range from a few hundredths to a few tenths of a weight per cent from crystal to crystal. The optical and chemical properties of the iron appear to be caused by postcrystallization migration and exsolution. Postcrystallization effects may obscure evidence of the original oxidation state and iron concentration of these crystals.

Bell, P. M.↗
DOE OSTI2025

In Situ Characterization of Surface Recombination in p-Si/SiO x Based Photoelectrochemical Cells

Time-resolved infrared (TRIR) and electrochemical impedance spectroscopy (EIS) were utilized to quantify surface states present at silicon oxide (SiO x ) protected crystalline p-Si electrolyte interfaces. The primary goal was to identify p-Si/SiO x photoelectrodes with both low surface recombination rates and efficient multi-electron transfer to an acceptor present in the external electrolyte. Three SiO x layers were investigated: native oxide (nOx), chemical oxide (cOx), and rapid thermal annealed (RTA) thermal oxide (tOx). Comparative study with [Ru(bpy) 3 ](PF 6 ) 2 as the electron acceptor indicated that tOx was most optimal with a small effective recombination rate, multi-electron transfer capability, and photovoltage of 500 ± 50 mV. A secondary goal was to analyze the surface recombination rates with the Shockley–Read–Hall (SRH) kinetic model. Two surface states were identified from this analysis, one closer to the CB edge (V t,1 ) and the other near the midgap (V t,2 ). EIS and SRH analyses revealed that a forming gas (5% H 2 /N 2 ) anneal (FGA) decreased surface recombination for tOx and nOx through a lower density of surface states. In the case of tOx, the infrared data indicated that V t,2 was completely removed. Here, the energetic positions of the band edges were correlated with the surface state density; low densities corresponded to more favorable potentials for inversion layer formation, which is expected to be most optimal for photocatalysis. Collectively this study indicates that the free carrier dynamics provided by TRIR represent a powerful in situ probe of the band edge and the surface state energetics in silicon based photoelectrochemical cells.

Electrochemical Impedance Spectroscopy↗
DOE OSTI2022

High manganese redox variability and manganate predominance in temperate soil profiles as determined by X-ray absorption spectroscopy

Manganese speciation is a key to understanding the fate of contaminants, nutrients, and organic matter in soils. To date, quantification of Mn species in bulk soils has been performed mainly by sequential extraction methods and rarely supported by spectroscopic analysis. In order to obtain quantitative information on the Mn species inventory of soils, we investigated 46 soil horizons (<2-mm fraction, 45.1–2,280 mg/kg Mn) of nine typical Central European soils (Cambisols, Chernozems, Luvisols, Podzol, Stagnosol) by chemical Mn analyses and Mn K-edge X-ray absorption spectroscopy, and related speciation results to major soil properties. Amounts of Mn 2+ , Mn 3+ , and Mn 4+ and the average oxidation state of Mn were evaluated by linear combination fitting (LCF) of X-ray absorption near edge structure (XANES) spectra. Additionally, we used extended X-ray absorption fine structure (EXAFS) spectroscopy to identify and quantify major Mn species. For this, EXAFS spectra of 20 organic and mineral soil samples from five soils (Cambisols, Chernozem, Luvisol) were analyzed by LCF and shell fitting. XANES analyses revealed a high Mn redox variability in organic surface layers, with Mn 2+ being most abundant (≤100%, $\overline{x}$ = 54%), followed by Mn 3+ (≤80%, $\overline{x}$ = 32%) and Mn 4+ (≤55%, $\overline{x}$ = 14%). Mineral soil horizons contained significantly less Mn 2+ (≤56%, $\overline{x}$ = 23%), about equal quantities of Mn 3+ (≤68%, $\overline{x}$ = 31%), and were enriched in Mn 4+ (≤89%, $\overline{x}$ = 46%). EXAFS analyses implied the presence of six major Mn species groups: manganates, organically complexed Mn, Mn(III) oxyhydroxides, silicate-bound Mn, Mn oxides without tunnel- or layer structure, and physisorbed Mn. In litter horizons, Mn was mainly present in organic complexes (58–91%, $\overline{x}$ = 78%) and as physisorbed Mn (≤15%), but individual horizons also comprised manganates, Mn(III) oxyhydroxides, and silicate-bound Mn. Manganates, likely mixtures of phyllomanganates with hexagonal layer symmetry and tectomanganates, dominated in all mineral soil horizons (37–94%, $\overline{x}$ = 67%). Correlation analysis showed that manganates dissolve completely during dithionite-citrate and acid ammonium oxalate extractions, and suggested that Mn 4+ -rich manganates preferentially form under less acidic soil conditions, partly by oxidation of organically complexed Mn(II), and that they are enriched in the soil clay fraction. Mineral soil horizons also contained minor quantities of organically complexed Mn (≤39%, $\overline{x}$ = 11%), silicate-bound Mn (≤30%, $\overline{x}$ = 8%), Mn(III) oxyhydroxides (≤37%, $\overline{x}$ = 7%), Mn oxides without tunnel- or layer structure (≤18%, $\overline{x}$ = 5%), and physisorbed Mn (≤14%, $\overline{x}$ <1%). The detection of Mn(III) oxyhydroxides such as feitknechtite (β-MnOOH) or groutite (α-MnOOH) as well as the spinel hausmannite (Mn 3 O 4 ) in acidic soils is remarkable, since their formation is normally linked to neutral or alkaline pH conditions. Minor contributions of silicate-bound Mn indicate the release of Mn from primary minerals already at early stages of soil formation, and low concentrations of physisorbed Mn suggest that exchangeable Mn is rapidly converted into manganates in oxic soils. In conclusion, the predominance of manganates in mineral soils has far-reaching implications for the functioning of soils and biogeochemical element cycles, as these minerals play an important role in metal binding, plant nutrition, and redox-related processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Estimation Methodology to Evaluate Hypothetical Downwind Impacts from Fusion Plants

The continuing move toward establishing fusion systems for power generation and the associated research to that end is prompting examination of the potential health and safety impacts of such plants to the environment and human health. As many fusion facilities will have tritium inventories on site as part of the fusion fuel, evaluating the potential for downwind impacts from fusion facilities or power plants resulting from accident or routine emissions is a general requirement for assessing location and impacts to workers and the public. As part of siting considerations and permitting, the fusion facilities would be evaluated for potential for downwind concentration and dose impacts. For accident assessment scenarios, the downwind impacts are usually modeled as an instantaneous (or near-instantaneous) release of material transported following the wind. A range of meteorological conditions are usually assessed to determine a bounding case which results in a dose exceeding a specified threshold (e.g., 95 th or 99 th percentile; DOE 2015). This report provides initial estimates of the downwind dose impacts from a potential tritium release at a fusion power plant-relevant facility and identifies potential distances required to limit impacts to nearby population. This effort is meant to provide a bounding analysis and theoretical understanding of impacts of tritium releases for facilities subject to various environmental and atmospheric conditions. Using a Gaussian dispersion model to simulate a brief plume, downwind concentration and dose is projected for tritium oxide. Releases are assumed to consist entirely of tritium oxide due to the increased dose impacts from the oxide form relative to the elemental form of tritium. We also briefly identify how climatological conditions could potentially be used to support risk profile determination.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Etching-Chemistry-Driven Ruthenium Doping on Ti 3 C 2 T x MXene for Optimizing Electrochemical Performance

We demonstrate that the etching chemistry used during MXene synthesis from Ti 3 AlC 2 MAX phase significantly influences surface functionalization and structural vacancies, which in turn affect ruthenium (Ru) ion interactions. Using hydrofluoric acid (HF) and ammonium bifluoride (NH 4 HF 2 ) as etchants, we obtained MXene surfaces with distinct functional groups and Ti vacancies that impact Ru ion interactions and electrochemical performance. Both MXene variants (labeled MX(H) and MX(N), respectively) exhibited negative zeta potentials in their pristine state, but upon the addition of Ru the zeta potential for MX(H) reached 12.9 mV while that for MX(N) remained negative at −6.4 mV. This adsorption resulted in a 14.4-fold increase in the specific capacitance of MX(H)/Ru compared to pristine MX(H), whereas MX(N)/Ru exhibited only a 4.4-fold increase over its pristine counterpart. X-ray diffraction analysis identified the formation of ammonium titanium oxide fluoride, (NH 4 ) 3 TiOF 5 , on MX(N), which likely contributed to its reduced Ru adsorption. X-ray photoelectron spectroscopy suggested the presence of Ti vacancies in both MXene variants; however, their behavior toward Ru accommodation differed markedly, with MX(H) showing the most obvious shift in the Ti 2p peak in the XPS survey spectrum, while MX(N) showed the most obvious shift in the C 1s peak. Electron paramagnetic resonance spectroscopy further demonstrated a distinct alteration in the spectral signatures of MX(H) upon Ru addition, in contrast to the negligible changes in MX(N), indicating effective passivation of the Ti defect sites in MX(H) via vacancy-assisted Ru doping. Cyclic voltammetry showed that Ru-incorporated MX(H) nanocomposites exhibit more efficient redox-active sites, as reflected in their higher capacitance values. These findings highlight the pivotal role of MXene surface chemistry in controlling cation adsorption, providing valuable insights for the rational design of high-performance electrodes.

2D surface engineering↗
DOE OSTI2025

Atmospheric methane consumption in arid ecosystems acts as a reverse chimney and is accelerated by plant-methanotroph biomes

Drylands cover one-third of the Earth’s surface and are one of the largest terrestrial sinks for methane. Understanding the structure–function interplay between members of arid biomes can provide critical insights into mechanisms of resilience toward anthropogenic and climate-change-driven environmental stressors—water scarcity, heatwaves, and increased atmospheric greenhouse gases. This study integrates in situ measurements with culture-independent and enrichment-based investigations of methane-consuming microbiomes inhabiting soil in the Anza-Borrego Desert, a model arid ecosystem in Southern California, United States. The atmospheric methane consumption ranged between 2.26 and 12.73 μmol m 2 h −1 , peaking during the daytime at vegetated sites. Metagenomic studies revealed similar soil-microbiome compositions at vegetated and unvegetated sites, with Methylocaldum being the major methanotrophic clade. Eighty-four metagenome-assembled genomes were recovered, six represented by methanotrophic bacteria (three Methylocaldum , two Methylobacter , and uncultivated Methylococcaceae ). The prevalence of copper-containing methane monooxygenases in metagenomic datasets suggests a diverse potential for methane oxidation in canonical methanotrophs and uncultivated Gammaproteobacteria. Five pure cultures of methanotrophic bacteria were obtained, including four Methylocaldum . Genomic analysis of Methylocaldum isolates and metagenome-assembled genomes revealed the presence of multiple stand-alone methane monooxygenase subunit C paralogs, which may have functions beyond methane oxidation. Furthermore, these methanotrophs have genetic signatures typically linked to symbiotic interactions with plants, including tryptophan synthesis and indole-3-acetic acid production. Based on in situ fluxes and soil microbiome compositions, we propose the existence of arid-soil reverse chimneys, an empowered methane sink represented by yet-to-be-defined cooperation between desert vegetation and methane-consuming microbiomes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Efficient Nighttime Biogenic SOA Formation in a Polluted Residual Layer

Abstract Organic nitrates formed from nighttime reaction between anthropogenic nitrate radicals (NO3) and biogenic volatile organic compounds (BVOCs) are potentially an important but highly uncertain source of secondary organic aerosol (SOA). Here we report on the enhanced nighttime biogenic SOA formation observed in a polluted residual layer over Sacramento, California, the morning of 15 June 2010 during the Carbonaceous Aerosols and Radiative Effects Study (CARES). Trajectory analysis showed that the residual layer air, containing trace amounts of isoprene and monoterpenes left over after nighttime oxidation, was influenced by the San Francisco Bay Area emissions the previous evening. The residual layer aerosol was also enriched in nitrate, with about 64% of it estimated to be in the form of organic nitrates. The nitrate:organic mass ratio of the SOA was about 0.47±0.044, which corresponds to the range typically found in isoprene mononitrates. Assuming the SOA was composed of organic mononitrates, its nominal molecular weight was estimated at 186±11 g mol-1, consistent with the highly functionalized isoprene hydroxynitrates that have been observed in the particle phase in the southeast United States. Overall, our findings show that the efficiency of nighttime biogenic SOA formation, expressed as the change in organic aerosol mass relative to carbon monoxide (?OA/?CO), was about 100 µg m-3 ppmv, which falls in the range 77-157 µg m-3 ppmv previously estimated for enhanced daytime SOA formation from mixed anthropogenic and biogenic emissions during CARES.

Zaveri, Rahul A.↗
DOE OSTI2026

Interfacial and Kinetic Origins of Voltage Loss in Neutral Zinc‐Air Batteries

Rechargeable zinc-air batteries are promising candidates for grid-scale energy storage; however, their practical deployment is limited by oxygen electrocatalysis inefficiencies and interfacial instabilities, particularly outside conventional alkaline electrolytes. Here, in this work, zinc-air batteries operating under neutral electrolyte conditions using ZnCl 2 soaked KC-PAA-PAM gel polymer electrolytes and electrochemically synthesized Ni/Fe layered double hydroxide electrocatalysts is investigated. Ni/Fe-LDH is intentionally employed as an OER-biased benchmark catalyst to diagnose electrolyte and interface driven limitations rather than as a bifunctional ORR/OER solution. Full cells exhibit highly stable cycling over hundreds of hours, yet operate at substantially suppressed charge and discharge voltages relative to the thermodynamic value. Electrochemical impedance analysis shows that ohmic losses contribute only minimally to this voltage suppression. Post-mortem X-ray photoelectron spectroscopy reveals metallic zinc accumulation on the air cathode and chloride-containing species on the anode, indicating parasitic interfacial processes. Synchrotron-based soft X-ray absorption spectroscopy confirms stable Ni 2+ and Fe 3+ oxidation states during cycling, consistent with OER-biased catalytic behavior, while neutral-electrolyte oxygen evolution measurements demonstrate strong electrolyte-induced suppression of oxygen kinetics. Together, these results show that electrolyte chemistry and cathode-side parasitic processes, rather than catalyst identity alone, dominate voltage losses in neutral zinc-air batteries, providing mechanistic insight into the fundamental challenges associated with neutral electrolyte operation.

Long duration energy storage↗