Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxygen evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Cobalt-Doped Black TiO 2 Nanotube Array as a Stable Anode for Oxygen Evolution and Electrochemical Wastewater Treatment

TiO 2 has long been recognized as a stable and reusable photocatalyst for water splitting and pollution control. However, it is an inefficient anode material in the absence of photoactivation due to its low electron conductivity. To overcome this limitation, a series of conductive TiO 2 nanotube array electrodes have been developed. Even though nanotube arrays are effective for electrochemical oxidation initially, deactivation is often observed within a few hours. To overcome the problem of deactivation, we have synthesized cobalt-doped Black-TiO 2 nanotube array (Co-Black NTA) electrodes that are stable for more than 200 h of continuous operation in a NaClO 4 electrolyte at 10 mA cm -2 . Using X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, electron paramagnetic resonance spectroscopy, and DFT simulations, we are able to show that bulk oxygen vacancies (Ov) are the primary source of the enhanced conductivity of Co-Black. Cobalt doping both creates and stabilizes surficial oxygen vacancies, Ov, and thus prevents surface passivation. The Co-Black electrodes outperform dimensionally stable IrO 2 anodes (DSA) in the electrolytic oxidation of organic-rich wastewater. Increasing the loading of Co leads to the formation of a CoO x film on top of Co-Black electrode. The CoO x /Co-Black composite electrode was found to have a lower OER overpotential (352 mV) in comparison to a DSA IrO 2 (434 mV) electrode and a stability that is greater than 200 h in a 1.0 M KOH electrolyte at a current density of 10 mA cm -2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing Photoelectrochemical Hydrogen and Oxygen Evolution at Individual Al:SrTiO 3 /Rh 2–y Cr y O 3 Photocatalyst Particles

Particle-based photocatalysts for overall water splitting convert solar energy into hydrogen fuel without the use of any photovoltaic devices. As such they have the potential to revolutionize renewable energy production on Earth. While proven efficiencies have reached 1.1%, further improvements of photocatalyst technology depend on a better understanding of energy loss mechanisms on the individual particle level. Here, we conduct the first in operando photoelectrochemical measurements on individual micrometer-sized Al-doped SrTiO 3 /Rh 2–y CryO 3 photocatalyst particles. We find that the photocatalyst particles behave mainly as water oxidation photoanodes reaching up to 0.5 mA cm −2 at 0.8 V versus RHE and a photovoltage of ∼1.00 V under 4.7 mW cm −2 ultraviolet illumination. This proves that charge separation in the unbiased Al:SrTiO 3 /Rh 2–y Cr y O 3 catalyst is driven by a junction at the n-semiconductor-liquid contact. While O 2 is detected symmetrically around photocatalyst particles, uneven H 2 evolution profiles reflect an irregular Rh 2–y Cr y O 3 cocatalyst distribution. Additionally, the H 2 evolution activity varies significantly between different photocatalyst particles. Furthermore, this suggests that performance gains are possible by better controlling catalyst composition on the microscale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Physical and photoelectrochemical characterizations of hematite {alpha}-Fe{sub 2}O{sub 3}: Application to photocatalytic oxygen evolution

The physical properties and photoelectrochemical characterization of {alpha}-Fe{sub 2}O{sub 3}, synthesized by co-precipitation, have been investigated in regard to solar energy conversion. The optical gap is found to be 1.94 eV and the transition is indirectly allowed. The chemical analysis reveals an oxygen deficiency and the oxide exhibits n-type conductivity, confirmed by a negative thermopower. The plot log {sigma} vs 1/T shows linearity in the range (400-670 K) with the donor levels at 0.14 eV below the conduction band and a break at {proportional_to}590 K, attributed to the ionization of the donors. The conduction occurs by small polaron hopping through mixed valences Fe{sup 2+/3+} with an electron mobility {mu}{sub 400} {sub K} of 10{sup -3} V cm{sup 2} s{sup -1}. {alpha}-Fe{sub 2}O{sub 3} exhibits long term chemical stability in neutral solution and has been characterized photoelectrochemically to assess its activity as bias-free O{sub 2}-photoanode. The flat band potential V{sub fb} (-0.45V{sub SCE}) and the electron density N{sub D} (1.63 x 10{sup 18} cm{sup -3}) were determined, respectively, by extrapolating the linear part to C{sup -2} = 0 and the slope of the Mott Schottky plot. At pH 6.5, the valence band (+1.35V{sub SCE}) is suitably positioned with respect to the O{sub 2}/H{sub 2}O level (+0.62 V) and {alpha}-Fe{sub 2}O{sub 3} has been evaluated for the chemical energy storage through the photocatalytic reaction: (2SO{sub 3}{sup 2-}+2 H{sup +}{yields} S{sub 2} O{sub 3}{sup 2-}+ O{sub 2}+ H{sub 2} O, {delta}G = 213.36 kJ mol{sup -1}). The best photoactivity occurs in SO{sub 3}{sup 2-} solution (0.025 M, pH 8) with an oxygen rate evolution of 7.8 cm{sup 3} (g catalyst){sup -1} h{sup -1}. (author)

14 SOLAR ENERGY↗

Tailoring Selectivity for Electrocatalytic Oxygen Evolution on Ruthenium Oxides by Zn Substitution

Controlling gas emissions: Versatile control of the selectivity of an oxide electrocatalyst in the oxygen- and chlorine-evolution reactions was demonstrated by Zn substitution in RuO{sub 2}. The incorporation of Zn into the rutile structure alters the cation sequence along the [001] direction and modifies the structure of the active sites for both gas-evolution processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the Structure–Function Relationship in Iridium–Cobalt Oxide Catalyst for Oxygen Evolution Reaction across Different Electrolyte Media

Renewable hydrogen generation from water electrolysis offers a viable path to decarbonization if the costs can be reduced. The iridium-based anode catalyst is one of the most expensive components in electrolyzers. We propose reducing iridium usage by substituting Ir with Co, a more affordable metal, in the mixed oxide phase to enhance the catalytic activity while minimizing Ir consumption. A modified surfactant-assisted Adams fusion synthesis technique was developed as a scalable method for producing IrCo oxide nanoparticles. The synthesized material outperforms the commercial baseline, iridium oxide with carbon (IrOx_C), in both acidic and alkaline media. Acid etching (IrCo_ae) further enhances activity by selectively removing Co to expose more active sites. IrCo_ae achieved a significantly lower overpotential at 10 mA/cm 2 compared to IrOx_C, with reductions of approximately 18% under acidic conditions and 14% under alkaline conditions. This work demonstrates that the proposed synthesis method enables efficient Ir utilization and can be adapted to enhance catalyst stability for renewable hydrogen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reimagining the $e_g$ 1 Electronic State in Oxygen Evolution Catalysis: Oxidation-State-Modulated Superlattices as a New Type of Heterostructure for Maximizing Catalysis

We report that the discovery of solid-phase, inexpensive transition-metal-based water oxidation catalysts is a central goal for renewable energy, and has led to a general consensus that a partially populated metal e g d-electronic state is desirable, leading to favorable catalysis for certain elements in specific oxidation states. In manganese systems, the key species is manganese(III), whose high-spin d 4 electronic configuration places an unpaired electron in the e g orbital, which is postulated to contribute to electronic and structural features that support catalysis. Based on density functional theory calculations, it is predicted that electron transfer would be facilitated by a catalyst with alternating low- and high-Mn III -content sheets, which positions neighboring band edges in closer energetic proximity. The preparation of such catalysts is demonstrated for the first time and it is shown that the catalytic activity is maximized in these systems over more uniform, but more Mn III -rich systems. The best catalyst possesses alternating high-and low-average oxidation state sheets with interlayer Cs + ions, and has an overpotential of 450 mV at 10 mA, which represents an improvement of 250 mV over the best unmodified synthetic potassium birnessites. Using scanning tunneling spectroscopy, bandgap modulations consistent with the theoretically predicted band edge shifts are detected.

36 MATERIALS SCIENCE↗