SEARCH · Search NASA

Results for “oxygen reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Elucidating the impact of the ionomer equivalent weight on a platinum group metal-free PEMFC cathode via oxygen limiting current

Leveraging the interactions between ionomer and catalyst can increase the performance of proton exchange membrane fuel cells. The impacts of the equivalent weight (EW) of perfluorosulfonic acid–based ionomers on the platinum group metal-free electrode structure and fuel cell performance have not been fully explored. Four membrane electrode assemblies (MEAs) were prepared by using a commercial Fe–N–C catalyst, two perfluorosulfonic acid ionomers with different EWs, that is, Aquivion 720 (A720) and Nafion 1100 (N1100), and two ionomer-to-catalyst (I/C) ratios. The four MEAs were characterized to understand the impact of the ionomer EW and content on the capacitance, proton conductivity, and mass transport on the cathode. The mass transport resistance was measured for the first time using a new oxygen reduction reaction limiting current method enabling to couple the effects of oxygen diffusion with liquid water generation. Low EW ionomer combined with a moderate I/C results in improved performance due to its enhanced proton conductivity. However, when used at high I/C, it can cause severe water flooding at high current density due to the enhanced liquid water uptake, especially at high relative humidity, resulting in lower catalyst utilization and higher mass transport resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Binary Atomically Dispersed Metal-Site Catalysts with Core–Shell Nanostructures for O 2 and CO 2 Reduction Reactions

Engineering atomically dispersed metal site catalysts with controlled local coordination environments and 3D nanostructures effectively improves the catalytic performance for the oxygen reduction reaction (ORR) and the carbon dioxide reduction reaction (CO 2 RR), which are critical for clean energy conversion and chemical production. Herein, an innovative approach for preparing core-shell nanostructured catalysts with different single-metal sites in the core and the shell, respectively, is developed. In particular, as the shell precursors, covalent organic polymers with a thin layered structure that is polymerized in situ and coated on a metal-doped ZIF-derived carbon core are used, followed by a controlled thermal activation. The selective combination and construction of different metal sites increase active site density in the surface layers, promote structural robustness, facilitate mass/charge transfer, and yield a possible synergy of active sites in the core and the shell. The p-FeNC(shell)@CoNC(core), consisting of a polymerized FeTPPCl-derived carbon layer (p-FeNC) on a Co-doped ZIF-derived carbon (CoNC), exhibits remarkable ORR activity and stability in acidic media along with encouraging durability in H 2 –air fuel cells. Likewise, a p-FeNC(shell)@NiNC(core) catalyst demonstrates outstanding CO 2 RR activity and stability. Hence, integrating two appropriate single-metal sites in core and shell precursors, respectively, can modulate morphological and catalytic properties for a possible synergy toward different electrocatalysis processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Sulfonated Diels–Alder Poly(Phenylene)s in Membrane Electrode Assemblies for Fuel Cells

The transition to environmentally sustainable materials in fuel cells requires alternatives to persistent polyfluoroalkyl substances (PFAS) like Nafion. This study investigates the performance-limiting factors of membrane electrode assemblies (MEAs) utilizing sulfonated Diels–Alder poly(phenylene)s (sDAPPs) as PFAS-free polymer electrolytes. Among the configurations evaluated, the greatest performance loss occurred when sDAPP is used as the cathode binder, primarily due to phenyl group adsorption on catalyst surfaces, which reduces oxygen reduction reaction activity and impedes oxygen transport. Additional performance degradation arises from membrane-electrode interfacial incompatibility and insufficient ionomer hydrophobicity. By addressing ionomer adsorption and improving interfacial contact, an sDAPP-based cathode achieved a current density of 1.57 A cm −2 at 0.6 V under fully humidified H 2 /air conditions at 80 °C and 150 kPa abs . These results offer key insights for advancing high-performance, PFAS-free fuel cell technologies.

08 HYDROGEN↗

DOE OSTI2020

In Situ Strain Evolution on Pt Nanoparticles during Hydrogen Peroxide Decomposition

Fundamental understanding of structural changes during catalytic reactions is crucial to understanding the underlying mechanisms and optimizing efficiencies. Surface energy and related catalytic mechanisms are widely studied. However, the catalyst lattice deformation induced by catalytic processes is not well understood. Here, we study the strain in an individual platinum (Pt) nanoparticle (NP) using Bragg coherent diffraction imaging under in situ oxidation and reduction reactions. When Pt NPs are exposed to H 2 O 2 , a typical oxidizer and an intermediate during the oxygen reduction reaction process, alternating overall strain distribution near the surface and inside the NP is observed at the (111) Bragg reflection. In contrast, relatively insignificant changes appear in the (200) reflection. Density functional theory calculations are employed to rationalize the anisotropic lattice strain in terms of induced stress by H 2 O 2 adsorption and decomposition on the Pt NP surface. Our study provides deeper insight into the activity-structure relationship in this system.

3D imaging↗

DOE OSTI2025

Implementing hydrogen oxidation reaction on Pt for controlling counter electrode processes

The search for active, stable, and durable materials for electrochemical energy technologies requires increasing levels of precision to establish true structure-function relationships and guide materials design from atomic and molecular scale. This increases the level of control required over the experimental system for proper materials evaluation. The choice of counter electrode material become crucial, as Pt dissolution at high voltages may cause contamination to the working electrode, especially when studying reductive processes in reactions such as oxygen reduction reaction (ORR), H 2 evolution reaction (HER), and the CO 2 reduction reaction. The learnings from “old school” electrochemistry groups lead us to leverage H 2 reactions over Pt to construct a counter electrode system with controlled potential that eliminates Pt ion contamination concerns. In here we discuss the construction of such Pt|H 2 counter electrode where key experimental aspects such as the H 2 flow rate and effective distribution determines the maximum current this counter electrode can accommodate before switching to high voltage and triggering Pt dissolution. Lastly, we demonstrate the use of the Pt|H 2 counter electrode in aqueous electrolytes during HER occurring on the working electrode at varying currents, showing that the Pt content in the cell remains below parts per trillion (ppt) up to 10 mA, and below 50 ppt at 100 mA up to 1 h of constant current hold. This work provides a guide to the implementation of Pt|H 2 counter electrodes to improve the precision of electrochemical experiments in search of highly active, selective, and durable materials for energy technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2013

Nanostructured Platinum Alloys for Use as Catalyst Materials

A series of binary and ternary Pt-alloys, that promote the important reactions for catalysis at an alloy surface; oxygen reduction, hydrogen oxidation, and hydrogen and oxygen evolution. The first two of these reactions are essential when applying the alloy for use in a PEMFC.

Hays, Charles C.↗

NASA NTRS2015

Nanostructured Platinum Alloys for Use as Catalyst Materials

Hays, Charles C.↗

DOE OSTI2020

Effect of strain on the reactivity of graphene films

The effect of strain on the adsorption of atomic species (Cl, H, N, and O) on pristine and nitrogen-doped graphene is studied using density functional theory. Expansive strain increases surface reactivity by destabilizing graphene π orbitals, which is similar to the shift in the d-band center observed on stretched metal surfaces. However, compressive strain leads to the formation of nanoripples that strongly bind atomic species at ridge sites, which is fundamentally different from adsorption on compressed metal surfaces. Furthermore, our findings suggest that strain can be used as an effective means of manipulating graphene’s reactivity, which is explicitly shown here for the oxygen reduction reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Critical Assessment of Electronic Structure Descriptors for Predicting Perovskite Catalytic Properties

The discovery and design of materials which can efficiently catalyze the oxygen reduction and evolution reactions at reduced temperatures is important for facilitating the widespread adoption of fuel cell and electrolyzer technologies. Numerous studies have produced correlations between catalytic properties, such as oxygen surface exchange or electrode area specific resistance (ASR), and properties of the catalyst material. However, correlations have historically been limited in scope (e.g., using only a few materials or at a single temperature) and it has been difficult to provide detailed assessments of their robustness. Here, in this study, we assess the ability of the O p-band center electronic structure descriptor, obtained from density functional theory (DFT) calculations, to correlate with oxygen surface exchange rates, diffusivities, and area specific resistances for a large database of perovskite oxide catalytic properties. By data mining the literature, we obtain 747 catalytic property value data points spanning 299 unique perovskite compositions from 313 studies. We assess linear correlations of each property with the O p-band center and find generally modest correlations that are qualitatively useful (prediction mean absolute errors of about 0.5 log units are typical), where the correlations are improved at higher temperatures (e.g., 800 °C vs. 500 °C) and significantly improve when considering fits to the subset of materials which have multiple independent measurements. These findings suggest that the spread of property data is significantly influenced by experimental uncertainty, and subsequent measurements of additional materials will likely improve the O p-band center correlations.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2021

Oxygen Vacancies Enriched Bi Based Catalysts for Enhancing Electrocatalytic CO2 Reduction to Formate

The practical application of CO2 conversion through electrochemical reduction is still hindered by the lack of high performance and cost-effective catalysts. It is thus imperative to explore feasible strategies for scalable fabrication of catalysts for CO2 reduction to targeting products with high efficiency. Herein, for the first time, a hybrid of BiOx encapsulated in carbon thin layer is developed as high active electrocatalyst for CO2 conversion, which is synthesized by pyrolysis using Bi MOF as precursor and sacrificial template. The carbon layer overcoating BiOx catalyst exhibits superior performance for CO2 reduction to formate, achieving a maximum Faradaic efficiency of 89.3 % and a maximum current density of 37.8 mA cm-2. It is found that the as-prepared BiOx catalyst is enriched with oxygen vacancies stabilized by the encapsulating carbon layer. Both the carbon layer and oxygen vacancies improve the charge transfer of the catalyst, in favor of the high formate current density. The defects of oxygen vacancies play a vital role in CO2 adsorption and activation and thereby further enhancing the electrocatalytic ability for formate production.

oxygen vacancy, bismuth, carbon coating, CO2 elect↗

DOE OSTI2024

Machine Learning Design of Perovskite Catalytic Properties

Abstract Discovering new materials that efficiently catalyze the oxygen reduction and evolution reactions is critical for facilitating the widespread adoption of solid oxide fuel cell and electrolyzer (SOFC/SOEC) technologies. Here, machine learning (ML) models are developed to predict perovskite catalytic properties critical for SOFC/SOEC applications, including oxygen surface exchange, oxygen diffusivity, and area specific resistance (ASR). The models are based on trivial‐to‐calculate elemental features and are more accurate and dramatically faster than the best models based on ab initio‐derived features, potentially eliminating the need for ab initio calculations in descriptor‐based screening. The model of ASR enables temperature‐dependent predictions, has well calibrated uncertainty estimates and online accessibility. Use of temporal cross‐validation reveals the model to be effective at discovering new promising materials prior to their initial discovery, demonstrating the model can make meaningful predictions. Using the SHapley Additive ExPlanations (SHAP) approach, detailed discussion of different approaches of model featurization is provided for ML property prediction. Finally, the model is used to screen more than 19 million perovskites to develop a list of promising cheap, earth‐abundant, stable, and high performing materials, and find some top materials contain mixtures of less‐explored elements (e.g., K, Bi, Y, Ni, Cu) worth exploring in more detail.

25 ENERGY STORAGE↗

DOE OSTI2020

Intramolecular Electrostatic Effects on O 2 , CO 2 , and Acetate Binding to a Cationic Iron Porphyrin

Noncovalent electrostatic interactions are important in many biological and chemical reactions, especially those that involve charged intermediates. There has been a growing interest in using electrostatic ligand designs—placing charges in the second coordination sphere—to improve molecular reactivity, catalysis, and electrocatalysis. For instance, an iron porphyrin bearing four cationic ortho -trimethylanilinium groups, Fe( o -TMA), has been reported to be an exceptional electrocatalyst for both the carbon dioxide reduction reaction (CO 2 RR) and the oxygen reduction reaction (ORR). These reactions involve many different steps, and it is not evident which steps are affected by the four positive charges, or why. By comparing Fe( o -TMA) with the related iron-tetraphenylporphyrin, this work examines how covalently positioned charged groups affect substrate binding and other key pre-equilibria of both the ORR and CO 2 RR, specifically acetate, dioxygen, and carbon dioxide binding. This study is among the first to directly measure the effects of electrostatics on ligand-binding. The results show that adding electrostatic groups to a catalyst design often results in a complex interplay of multiple effects, including changes in pre-equilibria prior to substrate binding, combinations of through-space and inductive contributions, and effects of ionic strength and solution dielectric. The inverse half-order dependence of binding constant on ionic strength is proposed as a clear marker for an electrostatic effect. Overall, the conclusions provide guidance for the increasingly popular electrostatic ligand designs in catalysis and other reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Carbon-Nanotube-Bridging Strategy for Integrating Single Fe Atoms and NiCo Nanoparticles in a Bifunctional Oxygen Electrocatalyst toward High-Efficiency and Long-Life Rechargeable Zinc–Air Batteries

The development of highly efficient and robust bifunctional electrocatalysts for oxygen reduction (ORR) and evolution reactions (OER) is the key issue for realizing high-performance and long-life rechargeable zinc–air batteries (ZABs). However, it is still a great challenge to integrate independent ORR and OER sites in a catalyst with high activity. Here, a carbon nanotube-bridging strategy is proposed to synthesize such a bifunctional oxygen electrocatalyst enriched with highly active single-atom Fe sites for the ORR and high-performance nanosized NiCo hydroxides for the OER. Consequently, the developed catalyst shows a small overpotential difference of 0.686 V. When used as an oxygen electrode catalyst, the corresponding ZAB exhibits a large power density of 219.5 mW cm ₋2 , a small charge–discharge voltage gap of 0.72 V at 10 mA cm ₋2 , and outstanding discharge–charge durability without attenuation after more than 700 cycles. This work proposes a new idea to realize multifunctional catalysts and drives the practical application of ZABs.

25 ENERGY STORAGE↗

DOE OSTI2021

A channel flow cell with double disk electrodes for oxygen electroreduction study at elevated temperatures and pressures: Theory

We report a new double-disk-electrode channel flow cell has been designed, constructed and tested. A theoretical treatment and implicit finite difference numerical simulations are presented, which permit the computation of the hydrodynamic behavior of this cell under steady state conditions, i.e., the diffusion limited current at the working electrode and the collection efficiency of the detector. The simulated results are consistent with those measured experimentally, indicating that our simulations appropriately describe the hydrodynamic behavior of this cell. The oxygen reduction reaction (ORR) on a carbon-supported nanoparticle Pt catalyst at both room temperature and 110 °C were preliminarily studied with this cell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Regulating Catalytic Properties and Thermal Stability of Pt and PtCo Intermetallic Fuel-Cell Catalysts via Strong Coupling Effects between Single-Metal Site-Rich Carbon and Pt

Developing low platinum-group-metal (PGM) catalysts for the oxygen reduction reaction (ORR) in proton-exchange membrane fuel cells (PEMFCs) for heavy-duty vehicles (HDVs) remains a great challenge due to the highly demanded power density and long-term durability. Here, this work explores the possible synergistic effect between single Mn site-rich carbon (Mn SA -NC) and Pt nanoparticles, aiming to improve intrinsic activity and stability of PGM catalysts. Density functional theory (DFT) calculations predicted a strong coupling effect between Pt and MnN 4 sites in the carbon support, strengthening their interactions to immobilize Pt nanoparticles during the ORR. The adjacent MnN 4 sites weaken oxygen adsorption at Pt to enhance intrinsic activity. Well-dispersed Pt (2.1 nm) and ordered L1 2 -Pt 3 Co nanoparticles (3.3 nm) were retained on the Mn SA -NC support after indispensable high-temperature annealing up to 800 °C, suggesting enhanced thermal stability. Both PGM catalysts were thoroughly studied in membrane electrode assemblies (MEAs), showing compelling performance and durability. The Pt@Mn SA -NC catalyst achieved a mass activity (MA) of 0.63 A mg Pt –1 at 0.9 V iR-free and maintained 78% of its initial performance after a 30,000-cycle accelerated stress test (AST). The L1 2 -Pt 3 Co@Mn SA -NC catalyst accomplished a much higher MA of 0.91 A mg Pt –1 and a current density of 1.63 A cm –2 at 0.7 V under traditional light-duty vehicle (LDV) H 2 –air conditions (150 kPa abs and 0.10 mg Pt cm –2 ). Furthermore, the same catalyst in an HDV MEA (250 kPa abs and 0.20 mg Pt cm –2 ) delivered 1.75 A cm –2 at 0.7 V, only losing 18% performance after 90,000 cycles of the AST, demonstrating great potential to meet the DOE targets.

25 ENERGY STORAGE↗

DOE OSTI2021

Rapid Atomic Ordering Transformation toward Intermetallic Nanoparticles

Chemically ordered intermetallic nanoparticles are promising candidates for energy-related applications such as electrocatalysis. However, the synthesis of intermetallics generally requires long annealing (several hours) to achieve the ordered structure, which causes nanoparticles agglomeration and diminished performance, particularly for catalysis. Herein, we demonstrate a new rapid Joule heating approach that can synthesize highly ordered and well-dispersed intermetallic nanoparticles. As a proof-of-concept, we synthesized fully ordered Pd 3 Pb intermetallic nanoparticles that feature small size distribution (~6 nm). Computational analysis of the L1 2 Pd 3 Pb material suggests that this rapid atomic ordering transformation can be attributed to a vacancy-mediated diffusion mechanism. Moreover, the nanoparticles demonstrate excellent electrocatalytic activity and exceptional stability for the oxygen reduction reaction (ORR), retaining >95% of the current density over 10 h of chronoamperometry test with negligible structural and compositional changes. Furthermore, this study demonstrates a new strategy of providing a new direction for intermetallic synthesis and catalyst discovery.

25 ENERGY STORAGE↗

DOE OSTI2020

Morphing Mn core @Pt shell nanoparticles: Effects of core structure on the ORR performance of Pt shell

Currently, the catalysts performance for the oxygen reduction reaction (ORR) is limited by two major factors, their price and the scaling relationship, i.e. constant offset, between the binding energy of reactants and reaction intermediates. Here we show that both limitations may be eased by using nanoparticle catalysts composed of a core of earth-abundant Mn and Pt shell of two atomic layers. We report the unusual atomic-structure of Mn core renders the distribution of coordination numbers and related atomic-level stresses on the Pt shell very broad in com- parison to pure Pt particles. This increases the chances of nearby sites on the shell to affect each other’s activity such that the dissociative absorption of molecular oxygen is facilitated without correspondingly increasing the binding strength of reaction intermediates, thereby promoting the ORR kinetics. Our findings introduce the concept of structural flexibility of the 3d-metal core and 5d-Pt shell as a strategy for catalysis performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Beyond Epitaxy: Ion Implantation as a Tool for Orbital Engineering

Manipulating electronic orbital states in quantum materials provides a powerful means of controlling their physical properties and technological functionality. Here, we demonstrate that orbital populations in strongly correlated oxide thin films can be continuously and reversibly tuned through postsynthesis He ion implantation. Using LaNiO 3 as a model system, we show that the orbital preference can be systematically adjusted from favoring in-plane d x 2 –y 2 occupation toward out-of-plane d z 2 states through precise control of ion fluence. Unlike conventional heteroepitaxial approaches that lock in orbital configurations during growth, this strain-doping technique enables continuous orbital tuning and the selective modification of specific film regions after device fabrication. We demonstrate the practical impact of this control by achieving a 7-fold enhancement in oxygen reduction reaction catalysis. This work establishes ion implantation as a powerful approach for orbital engineering that complements existing synthesis-based strategies while offering unique advantages for both basic research and device development.

Doping↗