Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Noise Reduction Potential of Phase Control for Distributed Propulsion Vehicles

Phase control is a noise reduction technique leveraging destructive interference of the coherent acoustic source field between a system of propellers rotating at equivalent rates. Carefully selecting the relative azimuthal blade positions (phase), the overall directivity of the blade passage frequency noise can be modified, potentially steering these tonal components away from sensitive areas. A modeling technique is described and validated using measurements of a dual-rotor system. The sensitivity of noise reduction through phase control is studied in a typical parameter space, i.e., dependence on rotation rate, number of propellers, spacing and layout, and rotation direction. Additionally, estimates of how realistic conditions, e.g., error in the phase controller, degrade potential benefits are described based on the generalized coherence of the system. From this, it is observed that the deviation from the nominal rotation rate should not exceed approximately 0.5% to achieve a 6 dB decrease at the blade passage frequency.

Kyle A Pascioni↗
NASA NTRS1986

Evidence for explosive chromospheric evaporation in a solar flare observed with SMM

SMM soft X-ray data and Sacramento Peak Observatory H-alpha observations are combined in a study of the impulsive phase of a solar flare. A blue asymmetry, indicative of upflow motions, was observed in the coronal Ca XIX line during the soft X-ray rise phase. H-alpha redshifts, indicative of downward motions, were observed simultaneously in bright flare kernels during the period of hard X-ray emission. It is shown that, to within observational errors, the impulsive phase momentum transported by the upflowing soft X-ray plasma is equivalent to that of the downward moving chromospheric material.

Zarro, D. M.↗
NASA NTRS1975

The influence of radio altimeter errors on pilot performance during the final approach and landing phase of an RPV mission

Due to the fact that remotely piloted vehicles (RPV's) are currently being flown from fixed base control centers, kinesthetic and real world peripheral vision cues are absent. The absence of these cues complicates the piloting task, particularly during the final approach and landing phase of a mission. The pilot's task is futher complicated by errors in the displayed altitude information. To determine the influence of these errors on pilot performance during the final approach and landing phase of a mission, an experiment was conducted in which pilot subjects were asked to fly a fixed base simulation of a Piper PA-30 aircraft, using degraded altitude information. For this experiment, the chevron component of the display configuration was driven by a radio altimeter. Four altimeters were used, each with a different error characteristic, but within the range specified for the Sperry series of radio altimeters. Results indicate that for range of errors considered, there is no significant difference in landing performance that can be attributed to errors in altitude information.

Howard, J. C.↗
NASA NTRS1996

Automated SEM Modal Analysis Applied to the Diogenites

Analysis of volume proportions of minerals, or modal analysis, is routinely accomplished by point counting on an optical microscope, but the process, particularly on brecciated samples such as the diogenite meteorites, is tedious and prone to error by misidentification of very small fragments, which may make up a significant volume of the sample. Precise volume percentage data can be gathered on a scanning electron microscope (SEM) utilizing digital imaging and an energy dispersive spectrometer (EDS). This form of automated phase analysis reduces error, and at the same time provides more information than could be gathered using simple point counting alone, such as particle morphology statistics and chemical analyses. We have previously studied major, minor, and trace-element chemistry of orthopyroxene from a suite of diogenites. This abstract describes the method applied to determine the modes on this same suite of meteorites and the results of that research. The modal abundances thus determined add additional information on the petrogenesis of the diogenites. In addition, low-abundance phases such as spinels were located for further analysis by this method.

Bowman, L. E.↗
NASA NTRS1991

Harmonic drive gear error: Characterization and compensation for precision pointing and tracking

Imperfections and geometry effects in harmonic drive gear reducers cause a cyclic gear error, which at a systems level, results in high frequency torque fluctuations. To address this problem, gear error testing was performed on a wide variety of sizes and types of harmonic drives. It was found that although all harmonic drives exhibit a significant first harmonic, higher harmonics varied greatly with each unit. From life tests, small changes were found in harmonic content, phase shift, and error magnitude (on the order of .008 deg peak-to-peak maximum) occurred for drives with many millions of degrees of output travel. Temperature variations also influenced gear error. Over a spread of approximately 56 C (100 F), the error varied in magnitude approximately 20 percent but changes in a repeatable and predictable manner. Concentricity and parallelness tests of harmonic drive parts resulted in showing alignment influence gear error amplitude. Tests on dedoidaled harmonic drives showed little effect on gear error; surprisingly, in one case for a small drive, gear error actually improved. Electronic compensation of gear error in harmonic drives was shown to be substantially effective for units that are first harmonic dominant.

Nye, Ted W.↗
NASA NTRS1992

A prototype automatic phase compensation module

The growing demands for high gain and accurate satellite communication systems will necessitate the utilization of large reflector systems. One area of concern of reflector based satellite communication is large scale surface deformations due to thermal effects. These distortions, when present, can degrade the performance of the reflector system appreciable. This performance degradation is manifested by a decrease in peak gain, and increase in sidelobe level, and pointing errors. It is essential to compensate for these distortion effects and to maintain the required system performance in the operating space environment. For this reason the development of a technique to offset the degradation effects is highly desirable. Currently, most research is direct at developing better material for the reflector. These materials have a lower coefficient of linear expansion thereby reducing the surface errors. Alternatively, one can minimize the distortion effects of these large scale errors by adaptive phased array compensation. Adaptive phased array techniques have been studied extensively at NASA and elsewhere. Presented in this paper is a prototype automatic phase compensation module designed and built at NASA Lewis Research Center which is the first stage of development for an adaptive array compensation module.

Terry, John D.↗
NASA NTRS1991

Phase ambiguity resolution for offset QPSK modulation systems

A demodulator for Offset Quaternary Phase Shift Keyed (OQPSK) signals modulated with two words resolves eight possible combinations of phase ambiguity which may produce data error by first processing received I(sub R) and Q(sub R) data in an integrated carrier loop/symbol synchronizer using a digital Costas loop with matched filters for correcting four of eight possible phase lock errors, and then the remaining four using a phase ambiguity resolver which detects the words to not only reverse the received I(sub R) and Q(sub R) data channels, but to also invert (complement) the I(sub R) and/or Q(sub R) data, or to at least complement the I(sub R) and Q(sub R) data for systems using nontransparent codes that do not have rotation direction ambiguity.

Nguyen, Tien M.↗
NASA NTRS1978

Continued investigation of potential application of Omega navigation to civil aviation

Major attention is given to an analysis of receiver repeatability in measuring OMEGA phase data. Repeatability is defined as the ability of two like receivers which are co-located to achieve the same LOP phase readings. Specific data analysis is presented. A propagation model is described which has been used in the analysis of propagation anomalies. Composite OMEGA analysis is presented in terms of carrier phase correlation analysis and the determination of carrier phase weighting coefficients for minimizing composite phase variation. Differential OMEGA error analysis is presented for receiver separations. Three frequency analysis includes LOP error and position error based on three and four OMEGA transmissions. Results of phase amplitude correlation studies are presented.

Baxa, E. G., Jr.↗
NASA NTRS2008

On-Orbit Multi-Field Wavefront Control with a Kalman Filter

A document describes a multi-field wavefront control (WFC) procedure for the James Webb Space Telescope (JWST) on-orbit optical telescope element (OTE) fine-phasing using wavefront measurements at the NIRCam pupil. The control is applied to JWST primary mirror (PM) segments and secondary mirror (SM) simultaneously with a carefully selected ordering. Through computer simulations, the multi-field WFC procedure shows that it can reduce the initial system wavefront error (WFE), as caused by random initial system misalignments within the JWST fine-phasing error budget, from a few dozen micrometers to below 50 nm across the entire NIRCam Field of View, and the WFC procedure is also computationally stable as the Monte-Carlo simulations indicate. With the incorporation of a Kalman Filter (KF) as an optical state estimator into the WFC process, the robustness of the JWST OTE alignment process can be further improved. In the presence of some large optical misalignments, the Kalman state estimator can provide a reasonable estimate of the optical state, especially for those degrees of freedom that have a significant impact on the system WFE. The state estimate allows for a few corrections to the optical state to push the system towards its nominal state, and the result is that a large part of the WFE can be eliminated in this step. When the multi-field WFC procedure is applied after Kalman state estimate and correction, the stability of fine-phasing control is much more certain. Kalman Filter has been successfully applied to diverse applications as a robust and optimal state estimator. In the context of space-based optical system alignment based on wavefront measurements, a KF state estimator can combine all available wavefront measurements, past and present, as well as measurement and actuation error statistics to generate a Maximum-Likelihood optimal state estimator. The strength and flexibility of the KF algorithm make it attractive for use in real-time optical system alignment when WFC alone cannot effectively align the system.

Lou, John↗
NASA NTRS2001

Timing the Geminga Pulsar with Gamma-Ray Observations

We present the COS-B/EGRET 1997 ephemeris for the rotation of the Geminga pulsar. This ephemeris is derived from high-energy gamma-ray observations that span 24 yr. The recently obtained accurate position and proper motion are assumed. A cubic ephemeris predicts the rotational phase of Geminga with errors smaller than 50 milliperiods for all existing high-energy gamma-ray observations that span a 24.2 yr timing baseline. The braking index obtained is 17 +/- 1. Further observation is required to ascertain whether this high value truly reflects the rotational energy loss mechanism, or whether it is a manifestation of timing noise. The ephemeris parameters are sufficiently constrained so that timing noise will be the limitation on forward extrapolation. If Geminga continues to rotate without a glitch, as it has for at least 23 yr, we expect this ephemeris to continue to describe the phase, with an error of less than 100 milliperiods, until 2008. Statistically significant timing residuals are detected in the EGRET data that depart from the cubic ephemeris at a level of 30 milliperiods. Although this could simply be an additional manifestation of timing noise, the EGRET timing residuals appear to have a sinusoidal modulation that is consistent with a planet of mass 1.7/sin i solar mass, orbiting Geminga at a radius of 3.3 AU.

Mattox, J. R.↗
NASA NTRS1984

MMIC devices for active phased array antennas

The study of printed circuit discontinuities is necessary in order to design, for example, transitions between rectangular waveguides and printed circuits. New developments with respect to the analytical approaches to this problem are discussed. A summary of the progress in the experimental approach is presented. The accurate solution for the modes in various millimeter-wave waveguides is essential in the analysis of many integrated circuit components, such as filters and impedance transformers. Problems associated with the numerical computation of these modes in two frequently used waveguide forms, namely, the finline and microstrip, are presented. The spectral domain method of formulation, with a moment method solution, is considered. This approach can be readily extended to analyze an arbitrary configuration of dielectric and metallized regions in a shielded enclosure. Galerkin's method is used, where the testing and basic functions are the same. It is shown that the mode functions, or eigenfunctions, are more sensitive to errors than the phase constants, or eigenvalues. The approximate mode functions do not satisfy the orthogonality relationship well, resulting in difficulties when these modal solutions are used to form an approximate Green's function or are used in a mode matching analysis.

Mittra, R.↗
NASA NTRS1972

Error analysis of bent ray radio occultation measurments

There are two types of experimental measurement errors of the Doppler data associated with the radio occultation, random and systematic. Random errors are due to thermal noise in the transmission channel, and the phase lock loop, and quantization error in the digital circuitry. These are called noise type errors. The systematic errors are due to geometric uncertainty and equipment phase instability. Considered is the amount of uncertainty, due to random measurement errors, in the refractivity profiles reconstructed by this type of indirect sensing experiment. A class of refractivity profiles is defined which approximately fit the set of measured data. Bounds are placed on the extent of this class of solution profiles. To accomplish this, the sensivity of the reconstructed refractivity profiles to errors in the measured quantity and the statistics of the errors in the measurement are examined.

Saintgermain, R. L.↗
NASA NTRS1971

Two-way coherent tracking systems.

Review of some results pertinent to the development of nonlinear theory on two-way coherent tracking systems. In particular, the model of cascaded systems is presented, and approximations to steady state probability density functions of the two-way system phase and Doppler error are developed. From these, certain numerical results required in the design and planning of these systems are derived.

Lindsey, W. C.↗
NASA NTRS1974

Decimal digit generator for commutated data: A Concept

Perform analog-to-digital conversion on input signal with staircase circuit having 10% resolution, convert digital result to analog voltage, subtract it from original input signal; read out feedback signals as decimal digit representation during one clock phase and servo-error difference between input and feedback as analog portion during following clock phase.

Rusk, S. J.↗
NASA NTRS1976

Observation of gamma rays with a 4.8 hour periodicity from CYG X-3

Energetic (E35 MeV) Gamma rays were observed from Cyg X-3 with the SAS-2 Gamma ray telescope. They are modulated at the 4.8 sup h period observed in the X-ray and infrared regions, and within the statistical error are in phase with this emission. The flux above 100 MeV has an average value of (4.4 + or - 1.1)x 10 to the -6 power/sq cm/sec. If the distance to Cyg X-3 is 10 kpcs, this flux implies a luminosity of more than 10 to the 37th power ergs/s if the radiation is isotropic and about 10 to the 36th power ergs/s if the radiation is restricted to a cone of one steradian, as it might be in a pulsar.

Lamb, R. C.↗