Search NASA⌕ Search

SEARCH · Search NASA

Results for “pulling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Evaporative coolers and wildfire smoke exposure: a climate justice issue in hot, dry regions

Low-income families in dry regions, including in the Southwestern United States, frequently cool their homes with evaporative ("swamp") coolers (ECs). While inexpensive and energy efficient compared to central air conditioners, ECs pull unfiltered outdoor air into the home, creating a health hazard to occupants when wildfire smoke and heat events coincide. A community-engaged research project to reduce wildfire smoke in homes was conducted in California's San Joaquin Valley in homes of Spanish-speaking agricultural workers. A total of 88 study participants with ECs were asked about their level of satisfaction with their EC and their willingness to pay for air filtration. About 47% of participants reported dissatisfaction with their EC, with the most frequently reported reason being that it brings in dust and air pollution. Participants were highly satisfied with air cleaners and air filters that were offered to them free-of-charge. However, a willingness to pay analysis showed that air filtration solutions would not be adopted without significant subsidies; furthermore, air filtration would be an ongoing cost to participants due to the need to regularly replace filters. Short-term filtration solutions for EC users are feasible to implement and may reduce smoke exposure during wildfire events. Such solutions would need to be offered at low-or no-cost to reduce barriers to adoption. Longer term solutions include prioritizing homes with ECs in wildfire smoke exposed regions for replacement with air cooling technologies that provide clean air. Because ECs are disproportionately in low-income homes, addressing smoke intrusion through these devices is an environmental justice issue.

Solomon, Gina M↗

NOvA 2024 official data release (26.61E20 neutrino + 12.5E20 antineutrino)

This data release corresponds to the Bayesian 2024 analysis of NOvA $\nu_e$ appearance and $\nu_{\mu}$ disappearance data, corresponding to analysis described in https://arxiv.org/abs/2509.04361. File `NOvA_2024_data_histograms.root` contains data histograms for all the NOvA data samples. Exposure: * neutrino-enhanced beam: 26.61E20 protons on target * antineutrino-enhanced beam: 12.5E20 protons on target External constraints: * ss2th12=0.851, dm21=7.53e-5 are fixed at 2019 PDG values, with negligible effect on NOvA predictions. * ss2th13 & dm32: * RCDB1D: 1D constraint from Daya Bay for ss2th13, 0.0851+/-0.0024 * RCDB2D: Correlated 2D constraint from Daya Bay on ss2th13 & dm32, available in their official 2023 data release: https://journals.aps.org/prl/abstract/10.1103/PhysRevLett.130.161802#supplemental An additional file containing the predictions (`NOvA_2024_prediction_with_systs_histograms.root`) for all channels’ signal and background components computed at the NOvA best-fit oscillation parameters and systematic pull terms. Numu samples include the no-oscillation case as well. Please note that any fits performed with these histograms are not expected to exactly reproduce the official NOvA results as parameterizations of the numerous systematic uncertainties considered in the official fits are not included in this release. The zip file also contains the 2D credible interval contours, with details in a README.md

Sztuc, Artur [University Coll. London] (ORCID:0000↗

SCILLA nitrogen oxide (NOx) airborne data

Nitrogen oxides mixing ratios in ppb are measured using a Teledyne API Model T200UP. The analyzer uses chemiluminescence to determine NO concentration. Alternating measurement of the concentrations of total NOx (NO + NO2) and just NO are made by directing the sample through a blue light converter that photolyzes NO2 to NO and bypassing it, respectively, with the NO2 concentration calculated as the difference between the two. Sampled air was pulled from above the Naval Postgraduate School’s (NPS) Twin Otter aircraft through a rear-facing, ¼” OD PFA Teflon tube. The sample stream was split between several other gas analyzers (CO, O3, and H2O) and an oxidation flow reactor. The NO, NO2, and NOx mixing ratios were recorded once per minute.

NOx concentration↗

SCILLA ozone (O3) airborne data

Ozone mixing ratios in ppb are measured using a Teledyne API Model T400U. The analyzer uses UV absorption at 254 nm to determine O3 concentration. Sampled air was pulled from above the Naval Postgraduate School’s (NPS) Twin Otter aircraft through a rear-facing, ¼” OD PFA Teflon tube. The sample stream was split between several other gas analyzers (CO, NOx, and H2O) and an oxidation flow reactor. The data were recorded at 0.1 Hz.

Ozone concentration↗

SCILLA Secondary Aerosol Volume Concentration Airborne Data

This data set contains secondary aerosol volume concentration in cubic micrometers per cubic centimeter (um^3/cm^3). The aerosol was generated in an oxidation flow reactor (OFR) and its volume concentration measured with a scanning mobility particle sizer (SMPS). Both components were designed and built at the University of California Riverside. Ambient particles were removed with a Teflon filter upstream of the OFR and then pure ammonium sulfate particles were added to create a stable aerosol surface area on which low-volatility oxidation products condense. High concentrations of hydroxyl radical (OH) formed inside the OFR accelerate the oxidative chemistry that would typically occur over a period of several days in the atmosphere, resulting in the production of secondary aerosol from precursor gases present in the ambient air. Concentrations of added ozone and water vapor were controlled to produce the desired and approximately constant level of photochemical aging. The reactor temperature was controlled, while the pressure was not, and was always slightly lower than that of the sampled outside air. Sampled air was pulled from above the Naval Postgraduate School’s (NPS) Twin Otter aircraft through a rear-facing, ¼” OD PFA Teflon tube. The sample stream was split between the OFR and several gas analyzers (NOx, CO, O3, and H2O). Though not contained in these files, data from an aerosol mass spectrometer intermittently operated downstream of the OFR are also available.

{"secondary aerosol concentration",aerosol_concent↗

A Climatology of Dust Deposition in the Upper Colorado River Basin for February-May 1980-2023

This data set is a long-term climatology of the average monthly total dust deposition, wet and dry, for the months of February-May 1980-2023 pulled from the MERRA-2 reanalysis data set over the Upper Colorado River Basin. This data set can be used to study the long-term spatiotemporal patterns of dust deposition, especially on snow. This data set is associated with the preprint article “A multi-decadal climatology of dust-on-snow from wet deposition in the Upper Colorado River Basin”.

dry_dust_deposition↗

Fast Growth of Ga2O3 on Highly Offcut (100)-Oriented Substrates

Beta-Ga2O3 has emerged as a leading candidate for next-generation power electronics, radio frequency (RF) switches, and extreme environment electronics due to a wide band gap (4.6 - 4.9 eV), high dopability (approximately 40 meV activation energy for an isolated silicon donor), and melt growth characteristics resulting in commercially available 4-inch substrates and commercial demonstrations of 6-inch substrates by multiple techniques. The (100) surface of Ga2O3 is highly desirable from a device and epitaxy standpoint - bulk growth of (100) material is more scalable than (010), the surface is nearly lattice-matched to p-type partner NiO, and Al2O3 incorporates at higher concentrations without phase separation. More importantly, the impact ionization coefficients along the [100] direction are low, leading to the highest possible critical fields. This is advantageous compared to the current state of the art, (001), due to reduced surface defects and increased possible breakdown voltage. However, the epitaxial growth rate on (100) surfaces is less than 10% of other faces due to weak bonding and favorable desorption, and on-axis (100) growth easily forms twin domains. Recent demonstrations have shown growth rate improvements from 0.4 nm/min to 1.5 nm/min by growing on (100) wafers that are offcut 6 degrees in the -c direction. These films show step-flow growth from (20-1) step-edges and high electron mobility due to suppressed twins. Despite these exciting results, offcuts greater than 6 degrees have not been explored due to the waste associated with grinding and polishing large offcuts. In this talk we will discuss the molecular beam epitaxy (MBE) growth and properties of Beta-Ga2O3 grown on (100) substrates offcut in the -c direction up to 13.4 degrees. These large offcuts are enabled by edge-fed film-defined growth (EFG) where the offcut is grown into the surface by pulling the crystal through the EFG die with the seed crystal rotated by the desired offcut angle. We will demonstrate that 13.4 degrees offcut substrates still exhibit a terraced (100) surface, and that a >10x increase (>5 nm/min) in growth rate is achieved. As previously reported on lower offcuts, we observe reversal of substrate twin domains around the (001) direction at the substrate-epilayer interface. We will discuss electrical properties including record-low (by MBE) unintentional doping densities of < 5E15 cm-3 and critical breakdown field in Schottky barrier diodes comparable with state-of-the-art (001) Ga2O3 without edge termination.

36 MATERIALS SCIENCE↗

Eight Ways Agrivoltaics Installations Can Impact Communities: Insights from the Energy to Communities Peer-Learning Cohort

From July to December of 2024, the National Laboratory of the Rockies partnered with World Resources Institute to run a peer-learning cohort for local governments and community-based organizations on "Implementing an Agrivoltaics Project." This cohort effort, funded by the U.S. Department of Energy's Energy to Communities program, provided 15 organizations with expert presentations, peer-learning opportunities, and technical assistance related to agrivoltaics project development. Pulling from cohort discussions, this document shares a summary of the benefits that agrivoltaics projects can provide to surrounding communities.

14 SOLAR ENERGY↗

Self sealing disconnect for tubing forms metal seal after breakaway

Disconnect fittings form a positive metal seal when the fill tube pulls against a metal sleeve when disconnected by force. A specially designed sleeve surrounds the fill tube. O-rings in the shoulder of the sleeve and near the outer end of the fill tube seal against leakage.

Gernandt, H. H.↗

Technique simulates effect of reduced gravity

To simulate the effects of lunar gravity, an arrangement of near-vertical cables has been devised. These suspend the test subject perpendicular to an inclined walkway to give the effect of reduced gravitational pull.

Hewes, D. E.↗

Spring loaded beaded cable makes efficient wire puller

An efficient wire puller consists of a steel probe with a hole in one end fastened to a steel cable which is strung with metal beads compressed by spring loaded ferrules. This device allows cables to be pulled or forced around bends and elbows in pipes or tubes.

Source record↗

Epoxy-coated containers easily opened by wire band

Epoxy coating reduces punctures, abrasions, and contamination of synthetic cellular containers used for shipping and storing fragile goods and equipment. A wire band is wound around the closure joint, followed by the epoxy coating. The container can then be easily opened by pulling the wire through the epoxy around the joint.

Mc Coy, J. W.↗

Temperature-stabilized, triggerable microelectronic astable multivibrator starts reliably

Multiple chip custom block, MIC construction is used to fabricate an ultracompact, low-power astable multivibrator. The design provides a multivibrator that free runs, eliminating lockup, is triggerable, pulling into synchronization with an external signal source, and permits design flexibility for controlling the frequency variations with temperature.

Stebbins, W. J.↗

Adaptive control circuit prevents amplifier saturation

Adaptive control circuit prevents saturation of push-pull output amplifiers used in low-power, low-torque suspension system. The adaptive control circuit senses how near the output amplifiers are to saturation and sets the B voltage in such a way as to keep them just clear of saturation.

Nondsieck, A. J.↗