Search NASA⌕ Search

SEARCH · Search NASA

Results for “radiation flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1963

Radiant Heat Transfer to Absorbing Gases Enclosed Between Parallel Flat Plates with Flow and Conduction

An analysis is presented for obtaining two-dimensional temperature profiles and heat transfer in a radiation-absorbing gray gas of uniform absorptivity under the combined influence of thermal radiation, conduction, and gas flow. The gas is enclosed in a channel of infinite width and finite length formed by two semi-infinite parallel flat plates. These plates are black emitting surfaces, and the ends of the channel are formed by porous black surfaces through which the gas can flow into or out of the channel. These porous black end surfaces are used to simulate the radiation environment external to the channel. First, results are obtained for heat transfer between the plates in the absence of both conduction and flow. These results are found to be in good agreement with those obtained for the same conditions by previous workers. Results are then presented for heat transfer between the plates for the case of a radiating and conducting, but stagnant, gas separating the plates. The effects of the interactions between radiation and conduction are discussed. It was found that the heat transfer for combined radiation and conduction in an absorbing gas is slightly greater than the sum for each process taken separately. Finally, results are given for heat transfer from the plates to a flowing, radiating gas in the absence of conduction. The two plates are at the same temperature, and the gas enters the channel with uniform velocity and temperature. The results obtained for this case indicate that the heat transferred to the flowing gas from the constant temperature surfaces goes through a maximum as the absorptivity of the gas increases. This is in qualitative agreement with earlier results obtained by other investigators. All the results are presented in terms of dimensionless parameters, for the sake of generality, and the derivation of the dimensionless parameters, which are indicative of the effects of conduction and flow is presented.

Gray Gas↗
DOE OSTI2023

Adaptive Angular Quadrature Scheme for a backwards-in-time Method of Characteristics Solution to the Radiative Transfer Equation [Slides]

Radiative transfer/radiation transport are important problems to solve in astrophysics and high energy density physics. Various methods exist to solve radiation transport, such as Monte Carlo (MC), Discrete Ordinates (S N ), Method of Characteristics (MOC), and the spherical harmonics (P N ) method. Method of Characteristics requires “launching” of rays in discrete directions. Unresolved details of angular mesh create ray effects and can miss sources in the domain. Ray effects can lead to unphysical “stepping” in solution and incorrect energy deposition. Adaptive quadrature schemes can be used to detect and mitigate these effects. The Method of Characteristics (MOC) is a common method for solving hyperbolic PDEs in radiation transport and supersonic flow problems. Generally in MOC for radiation transport, virtual particles are tracked from birth to the end of a timestep. This requires interpolation to go from final location to cell averaged or corner values of angular intensity. Backwards-in-Time (BIT) particle tracking avoids this by prescribing the final position of the virtual particle at the cell nodes/corners. Angular intensities are computed at time k + 1 by launching ray back to previous timestep(s), or t = 0. Scheme allows solution to be computed as the characteristic ray is traced backwards in time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1979

Modal propagation angles in a cylindrical duct with flow and their relation to sound radiation

The angles of propagation for the wave front making up a duct mode are presented with the Mach number in the duct. Approximate equations are derived to provide simple utilitarian expressions. These expressions are valid only near the outer wall which is the most important region since the bulk of the acoustic intensity is located there. Exact solutions using Hankel functions are given in an appendix. These data corroborate the approximate solution accuracy near the outer wall. The axial propagation angle is used to infer information about the far-field radiation pattern. The resultant axial angle of propagation in the duct is shown to agree exactly with the peak of the principal lobe to far-field radiation obtained from formal radiation calculations when the Mach number is uniform everywhere. The obtained solution is extended to cover the case of different Mach numbers inside and outside the duct for which exact calculations have not been available for engine inlet configurations.

Rice, E. J.↗
NASA NTRS1983

A holographic interferometry technique for measuring transonic flow near a rotor blade

A technique that uses holographic interferometry to record the first interferograms of the flow near a hovering transonic rotor blade is presented. A pulsed ruby laser is used to record interferograms of a 2 ft diam field of view near a rotor tip operating at a tip Mach number of 0.90. Several interferograms, recorded along planes perpendicular to the rotor's tip path plane at various azimuth angles around the flow, are presented. These interferograms yield quantitative information about shock structure and location, flow separation, and radiated noise that will help helicopter researchers understand the complexities of the flow around high speed rotor blades and thus improve performance and reduce noise.

Kittleson, J. K.↗
NASA NTRS1993

On radiating baroclinic instability of zonally varying flow

A quasi-geostrophic, two-layer, beta-plane model is used to study the baroclinic instability characteristics of a zonally inhomogeneous flow. It is assumed that the disturbance varied slowly in the cross-stream direction, and the stability problem was formulated as a 1D initial value problem. Emphasis is placed on determining how the vertically averaged wind, local maximum in vertical wind shear, and length of the locally supercritical region combine to yield local instabilities. Analysis of the local disturbance energetics reveals that, for slowly varying basic states, the baroclinic energy conversion predominates within the locally unstable region. Using calculations of the basic state tendencies, it is shown that the net effect of the local instabilities is to redistribute energy from the baroclinic to the barotropic component of the basic state flow.

Finley, Catherine A.↗
NASA NTRS1993

Measurement and analysis of nitric oxide radiation in an arc-jet flow

On the bases of the centerline enthalpy value deduced from heat transfer measurements and the NOZNT code, it is possible to predict the freestream conditions in an arcjet wind tunnel flow. The translational-rotational and vibrational temperature of NO is nearly reproducible by NOZNT. Relative to the electron and electronic temperatures, the vibrational temperature of N2 and NO are significantly lower at enthalpies of less than 45 MJ/kg. The enthalpy deduced from spectroscopic measurements is in rough agreement with that deduced from heat transfer measurements.

Babikian, Dikran S.↗
NASA NTRS1995

Active control of panel vibrations induced by a boundary layer flow

The problems of active and passive control of sound and vibration has been investigated by many researchers for a number of years. However, few of the articles are concerned with the sound and vibration with flow-structure interaction. Experimental and numerical studies on the coupling between panel vibration and acoustic radiation due to flow excitation have been done by Maestrello and his associates at NASA/Langley Research Center. Since the coupled system of nonlinear partial differential equations is formidable, an analytical solution to the full problem seems impossible. For this reason, we have to simplify the problem to that of the nonlinear panel vibration induced by a uniform flow or a boundary-layer flow with a given wall pressure distribution. Based on this simplified model, we have been able to consider the control and stabilization of the nonlinear panel vibration, which have not been treated satisfactorily by other authors. Although the sound radiation has not been included, the vibration suppression will clearly reduce the sound radiation power from the panel. The major research findings are presented in three sections. In section two we describe results on the boundary control of nonlinear panel vibration, with or without flow excitation. Sections three and four are concerned with some analytical and numerical results in the optimal control of the linear and nonlinear panel vibrations, respectively, excited by the flow pressure fluctuations. Finally, in section five, we draw some conclusions from research findings.

Chow, Pao-Liu↗
NASA NTRS1982

An experimental study of heat induced surface-tension driven flow

Laser Doppler anemometry, radiation thermometry, and time-lapse photography have been used to study heat induced surface-tension driven flows in silicone oil and Fluorinert FC-43 in large open containers. For silicone oil, the effect of the surface tension gradient on the velocity field was not apparent enough to be detected. Because of its high viscosity, the oil was insensitive to outside disturbances, and the flow was steady. In the case of FC-43, the fluid was noticeably influenced by outside disturbances, and the flow was unsteady. The work reported here is part of an effort to develop experimental techniques and select test fluids for future space experiments on fluid motion in materials processing.

Kamotani, Y.↗
NASA NTRS2007

Effects of Lewis Number on Temperatures of Spherical Diffusion Flames

Spherical diffusion flames supported on a porous sphere were studied numerically and experimentally. Experiments were performed in 2.2 s and 5.2 s microgravity facilities. Numerical results were obtained from a Chemkin-based program. The program simulates flow from a porous sphere into a quiescent environment, yields both steady-state and transient results, and accounts for optically thick gas-phase radiation. The low flow velocities and long residence times in these diffusion flames lead to enhanced radiative and diffusive effects. Despite similar adiabatic flame temperatures, the measured and predicted temperatures varied by as much as 700 K. The temperature reduction correlates with flame size but characteristic flow times and, importantly, Lewis number also influence temperature. The numerical results show that the ambient gas Lewis number would have a strong effect on flame temperature if the flames were steady and nonradiating. For example, a 10% decrease in Lewis number would increase the steady-state flame temperature by 200 K. However, for these transient, radiating flames the effect of Lewis number is small. Transient predictions of flame sizes are larger than those observed in microgravity experiments. Close agreement could not be obtained without either increasing the model s thermal and mass diffusion properties by 30% or reducing mass flow rate by 25%.

Santa, K. J.↗
NASA NTRS1993

Current status of liquid sheet radiator research

Initial research on the external flow, low mass liquid sheet radiator (LSR), has been concentrated on understanding its fluid mechanics. The surface tension forces acting at the edges of the sheet produce a triangular planform for the radiating surface of width, W, and length, L. It has been experimentally verified that (exp L)/W agrees with the theoretical result, L/W = (We/8)exp 1/2, where We is the Weber number. Instability can cause holes to form in regions of large curvature such as where the edge cylinders join the sheet of thickness, tau. The W/tau limit that will cause hole formation with subsequent destruction of the sheet has yet to be reached experimentally. Although experimental measurements of sheet emissivity have not yet been performed because of limited program scope, calculations of the emissivity and sheet lifetime is determined by evaporation losses were made for two silicon based oils; Dow Corning 705 and Me(sub 2). Emissivities greater than 0.75 are calculated for tau greater than or equal to 200 microns for both oils. Lifetimes for Me(sub 2) are much longer than lifetimes for 705. Therefore, Me(sub 2) is the more attractive working fluid for higher temperatures (T greater than or equal to 400 K).

Chubb, Donald L.↗
NASA NTRS1992

Proposed radiometric measurement of the wake of a blunt aerobrake

This paper describes the aerothermal environment in the afterbody region of a blunt entry body. Recent ground-based experiments and computational predictions of the afterbody flow structure and radiation are presented. The similarity between the flowfield structures observed in the ground-based experiments and that obtained by calculation is encouraging. Approximate calculations of the radiative heating rate to the base are presented. Many of the phenomena associated with the expanding flow at the corner and the formation of the wake neck, however, are not well understood and require further study. A flight experiment is described that would use spectral and total measurements of the wake radiation as a nonintrusive diagnostic method to provide insight into the thermodynamic state of the wake gas.

Strawa, A. W.↗
NASA NTRS1993

Opposed-Flow Flame Spreading in Reduced Gravity

Experimental results obtained in drop towers and in Space Shuttle based experiments coupled with modelling efforts are beginning to provide information that is allowing an understanding to be developed of the physics of opposed-flow flame spread at reduced gravity where the spread rate and flow velocity are comparable and of the role played by radiative and diffusive processes in flame spreading in microgravity. Here we describe one Space Shuttle based experiment on flame spreading in a quiescent environment, the Solid Surface Combustion Experiment, SSCE, one planned microgravity experiment on flame spreading in a radiatively-controlled, forced opposing flow environment, the Diffusive and Radiative Transport in Fires Experiment, DARTFire, modelling efforts to support these experiments, and some results obtained to date.

Altenkirch, Robert A.↗
NASA NTRS2023

Radiation Interaction with Particulates in Planetary Entry Flows

A hypersonic particle phase solver based on a continuum model is implemented in the NASA HyperSolve CFD code and used to predict particle phase conditions in a dusty Mars entry scenario. Black-body radiative emission from high temperature dust particles is predicted for a Mars relevant entry problem, and the emission integrated to an entry vehicle using a ray tracing approach to estimate surface heat flux. The surface heating due to this mechanism is found to be small relative to convective and radiation from the gas phase emission. Additionally, the effect of atmospheric haze particulates vaporizing in the Titan atmosphere is studied. The increase in carbon availability due to the composition of the haze particles is found to increase the gas radiative heating to the vehicle by up to 3% on the forebody of a representative Titan entry vehicle with approximately 0.15% haze in the freestream by mass.

Andrew Hinkle↗
NASA NTRS1993

Survey of nonequilibrium re-entry heating for entry flight conditions

A viscous shock layer method has been developed which includes the effects of chemical and thermal nonequilibrium and is coupled with a radiation analysis which includes thermodynamic nonequilibrium effects. This code has been used to obtain solutions for a wide variety of nonequilibrium re-entry conditions in air. The results are tabulated and displayed graphically. Comparisons are made to similar results obtained for radiatively coupled equilibrium flow and conclusions drawn on the effect of nonequilibrium and in particular thermodynamic nonequilibrium on the radiative environment about re-entry vehicles.

Gally, Thomas A.↗