Search NASA⌕ Search

SEARCH · Search NASA

Results for “remote data collection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Role of Inverter-Based Resources (IBRs) in Energizing Remote Generating Stations

The increasing integration of Inverter-Based Resources (IBRs) into the system has brought significant focus on their role in blackstart and restoration procedures. Their advantageous features, such as low startup power requirements, operational flexibility across a wide range of power factors, rapid controllability, and the ability to energize a network at lower voltage levels necessitate a reassessment of existing restoration protocols. This paper seeks to showcase how IBRs can utilize their grid-forming capabilities to provide power to a remote generating station through detailed EMT simulation studies using data collected from an existing portion of a network.

blackstart procedure↗

Landsat-4 thematic mapper (TM) for cold environments

Landsat-4 was launched into a near-polar, sun-synchronous orbit on July 16, 1982. It is the largest and most complex of NASA's earth resources satellites. Landsat-4's instrument payload includes two remote sensors. The Multispectral Scanner Subsystem (MSS) is an electro-optical scanning radiometer with four spectral bands in the visible and near infrared, which was also carried aboard Landsats 1, 2, and 3. The second sensor, the Thematic Mapper (TM), represents a more advanced remote sensing instrument than the MSS. It uses a scanning mirror assembly to collect data from a 15.4 deg angle on both forward and reverse scans. It is pointed out that the improved spatial, spectral, and radiometric characteristics of TM have significant implications for satellite remote sensing in cold environments. The expected improvements are discussed, giving attention to snow, ice, water, soil, and land cover.

Gervin, J. C.↗

A transportable hemispherical illumination system for making reflectance factor measurements

An artificial source of stable, hemispherical illumination has been developed to facilitate the collection of reflectance factor measurements of targets of interest in a laboratory environment. The light source consists of a 76 cm (30 in.) aluminum hemisphere which has been coated internally with barium sulfate paint. Illumination is provided by two banks of lamps, each consisting of eight 62-W quartz halogen bulbs which have tungsten filaments. An internal baffle precludes the viewing of any direct beam of light. A simple metal structure has been developed to hold the hemisphere and all peripheral equipment, such as spectrometers, radiometers, and cameras, in place during data collection. The entire setup can be easily disassembled and packed in airline approved shipping cases to facilitate transportation to remote laboratory facilities. This illumination system has been used during the past three years to collect spectral reflectance factor data of tree branch samples and seedlings in support of an on-going study to investigate the effect of acidic deposition on forest vegetation.

Williams, Darrel L.↗

Sensor Web Dynamic Measurement Techniques and Adaptive Observing Strategies

Sensor Web observing systems may have the potential to significantly improve our ability to monitor, understand, and predict the evolution of rapidly evolving, transient, or variable environmental features and events. This improvement will come about by integrating novel data collection techniques, new or improved instruments, emerging communications technologies and protocols, sensor mark-up languages, and interoperable planning and scheduling systems. In contrast to today's observing systems, "event-driven" sensor webs will synthesize real- or near-real time measurements and information from other platforms and then react by reconfiguring the platforms and instruments to invoke new measurement modes and adaptive observation strategies. Similarly, "model-driven" sensor webs will utilize environmental prediction models to initiate targeted sensor measurements or to use a new observing strategy. The sensor web concept contrasts with today's data collection techniques and observing system operations concepts where independent measurements are made by remote sensing and in situ platforms that do not share, and therefore cannot act upon, potentially useful complementary sensor measurement data and platform state information. This presentation describes NASA's view of event-driven and model-driven Sensor Webs and highlights several research and development activities at the Goddard Space Flight Center.

Talabac, Stephen J.↗

Plumes and Blooms: Modeling the Case II Waters of the Santa Barbara Channel

The goal of the Plumes and Blooms (PnB) project is to develop, validate and apply to imagery state-of-the-art ocean color algorithms for quantifying sediment plumes and phytoplankton blooms for the Case II environment of the Santa Barbara Channel. We conduct monthly to twice-monthly transect observations across the Santa Barbara Channel to develop an algorithm development and product validation data set. The PnB field program started in the summer of 1996. At each of the 7 PnB stations, a complete verification bio-geo-optical data set is collected. Included are redundant measures of apparent optical properties (remote sensing reflectance and diffuse attenuation spectra), as well as in situ profiles of spectral absorption, beam attenuation and backscattering coefficients. Water samples are analyzed for component in vivo absorption spectra, fluorometric chlorophyll, phytoplankton pigment (by the SDSU CHORS laboratory), and inorganic nutrient concentrations. A primary goal is to use the PnB field data set to objectively tune semi-analytical models of ocean color for this site and apply them using available satellite imagery (SeaWiFS and MODIS). In support of this goal, we have also been addressing SeaWiFS ocean color and AVHRR SST imagery. We also are using the PnB data set to address time/space variability of water masses in the Santa Barbara Channel and its relationship to the 1997/1998 El Nino. However, the comparison between PnB field observations and satellite estimates of primary products has been disappointing. We find that field estimates of water-leaving radiance, L(sub wN)(lambda), correspond poorly to satellite estimates for both SeaWiFS and MODIS local area coverage imagery. We believe this is due to poor atmospheric correction due to complex mixtures of aerosol types found in these near-coastal regions. Last, we remain active in outreach activities.

Siegel, D. A.↗

Plumes and Blooms: Observations, Analysis and Modeling for SIMBIOS

The goal of the Plumes and Blooms (PnB) project is to develop, validate and apply to imagery state-of-theart ocean color algorithms for quantifying sediment plumes and phytoplankton blooms for the Case I1 environment of the Santa Barbara Channel. We conduct monthly to twice-monthly transect observations across the Santa Barbara Channel to develop an algorithm development and product validation data set. The PnB field program started in the summer of 1996. At each of the 7 PnB stations, a complete verification bio-geo-optical data set is collected. Included are redundant measures of apparent optical properties (remote sensing reflectance and diffuse attenuation spectra), as well as in situ profiles of spectral absorption, beam attenuation and backscattering coefficients. Water samples are analyzed for component in vivo absorption spectra, fluorometric chlorophyll, phytoplankton pigment (by the SDSU CHORS laboratory), and inorganic nutrient concentrations (Table 1). A primary goal is to use the PnB field data set to objectively tune semi-analytical models of ocean color for this site and apply them using available satellite imagery (SeaWiFS and MODIS). In support of this goal, we have also been addressing SeaWiFS ocean color and AVHRR SST imagery (Otero and Siegel, 2003). We also are using the PnB data set to address time/space variability of water masses in the Santa Barbara Channel and its relationship to the 1997/1998 El Niiio. However, the comparison between PnB field observations and satellite estimates of primary products has been disappointing. We find that field estimates of water-leaving radiance, LwN(h), correspond poorly to satellite estimates for both SeaWiFS and MODIS local area coverage imagery. We believe this is due to poor atmospheric correction due to complex mixtures of aerosol types found in these near-coastal regions. Last, we remain active in outreach activities.

Siegel, D. A.↗

MAMS: High resolution atmospheric/surface properties

The Multispectral Atmospheric Mapping Sensor (MAMS) has been used for a number of investigations over the last 8 years. It has served as the basis for retrieval technique development, for atmospheric process studies, and to retrieve geophysical parameters at the surface (land and ocean). It was used most recently to collect high resolution visible and infrared imagery for the CaPE and STORMFEST experiments during FY91 and FY92. The Wildfire spectrometer (similar to MAMS but with different infrared channels) was also used during STORMFEST. The goals of MAMS during CaPE were: (1) to collect MAMS data to support the overall CaPE science objectives; (2) refine techniques for the retrieval of atmospheric moisture and surface geophysical parameters; (3) map the moisture distributions associated with the sea breeze front over Florida with MAMS ancillary satellite data on a case study basis; (4) identify surface features which may serve as local sources of heat and moisture and influence preferential convective regions over Florida, and (5) process MAMS data and derived relevant geophysical parameters to support other CaPE investigators. For STORMFEST both the MAMS and Wildfire spectrometers were used to collect unique multispectral data to study atmospheric processes. The Wildfire objectives were: (1) to collect high quality Wildfire data in conjunction with other in situ and remote measurements available during the STORMFEST field phase (1 February - 15 March 1992); (2) to develop algorithms to retrieve total ozone content and compare with those from TOMS and HIRS (IR); and (3) along with water vapor imagery, use the ozone data to better understand the 3-dimensional structure and dynamics of jet streaks and frontal systems in a case study investigation. The MAMS objectives were: (1) collect MAMS data to support a GSFC investigation of gravity waves; and (2) process the MAMS data to locate gravity wave features, and produce various moisture products in support of the gravity wave investigation. The research activities over the last year are presented and they focused on analyzing the CaPE data sets and collecting and starting preliminary analysis of the STORMFEST MAMS and Wildfire data.

Jedlovec, Gary J.↗

International Conference on Remote Sensing Applications for Archaeological Research and World Heritage Conservation

Contents include the following: Monitoring the Ancient Countryside: Remote Sensing and GIS at the Chora of Chersonesos (Crimea, Ukraine). Integration of Remote Sensing and GIS for Management Decision Support in the Pendjari Biosphere Reserve (Republic of Benin). Monitoring of deforestation invasion in natural reserves of northern Madagascar based on space imagery. Cartography of Kahuzi-Biega National Park. Cartography and Land Use Change of World Heritage Areas and the Benefits of Remote Sensing and GIS for Conservation. Assessing and Monitoring Vegetation in Nabq Protected Area, South Sinai, Egypt, using combine approach of Satellite Imagery and Land Surveys. Evaluation of forage resources in semi-arid savannah environments with satellite imagery: contribution to the management of a protected area (Nakuru National Park) in Kenya. SOGHA, the Surveillance of Gorilla Habitat in World Heritage sites using Space Technologies. Application of Remote Sensing to monitor the Mont-Saint-Michel Bay (France). Application of Remote Sensing & GIS for the Conservation of Natural and Cultural Heritage Sites of the Southern Province of Sri Lanka. Social and Environmental monitoring of a UNESCO Biosphere Reserve: Case Study over the Vosges du Nord and Pfalzerwald Parks using Corona and Spot Imagery. Satellite Remote Sensing as tool to Monitor Indian Reservation in the Brazilian Amazonia. Remote Sensing and GIS Technology for Monitoring UNESCO World Heritage Sites - A Pilot Project. Urban Green Spaces: Modern Heritage. Monitoring of the technical condition of the St. Sophia Cathedral and related monastic buildings in Kiev with Space Applications, geo-positioning systems and GIS tools. The Murghab delta palaeochannel Reconstruction on the Basis of Remote Sensing from Space. Acquisition, Registration and Application of IKONOS Space Imagery for the cultural World Heritage site at Mew, Turkmenistan. Remote Sensing and VR applications for the reconstruction of archaeological landscapes. Archaeology through Space: Experience in Indian Subcontinent. The creation of a GIS Archaeological Site Location Catalogue in Yucatan: A Tool to preserve its Cultural Heritage. Mapping the Ancient Anasazi Roads of Southeast Utah. Remote Sensing and GIS Technology for Identification of Conservation and Heritage sites in Urban Planning. Mapping Angkor: For a new appraisal of the Angkor region. Angkor and radar imaging: seeing a vast pre-industrial low-density, dispersed urban complex. Technical and methodological aspects of archaeological CRM integrating high resolution satellite imagery. The contribution of satellite imagery to archaeological survey: an example from western Syria. The use of satellite images, digital elevation models and ground truth for the monitoring of land degradation in the "Cinque Terre" National park. Remote Sensing and GIS Applications for Protection and Conservation of World Heritage Site on the coast - Case Study of Tamil Nadu Coast, India. Multispectral high resolution satellite imagery in combination with "traditional" remote sensing and ground survey methods to the study of archaeological landscapes. The case study of Tuscany. Use of Remotely-Sensed Imagery in Cultural Landscape. Characterisation at Fort Hood, Texas. Heritage Learning and Data Collection: Biodiversity & Heritage Conservation through Collaborative Monitoring & Research. A collaborative project by UNESCO's WHC (World Heritage Center) & The GLOBE Program (Global Learning and Observations to Benefit the Environment). Practical Remote Sensing Activities in an Interdisciplinary Master-Level Space Course.

Source record↗

Performance Considerations for the SIMPL Single Photon, Polarimetric, Two-Color Laser Altimeter as Applied to Measurements of Forest Canopy Structure and Composition

The Slope Imaging Multi-polarization Photon-counting Lidar (SIMPL) is a multi-beam, micropulse airborne laser altimeter that acquires active and passive polarimetric optical remote sensing measurements at visible and near-infrared wavelengths. SIMPL was developed to demonstrate advanced measurement approaches of potential benefit for improved, more efficient spaceflight laser altimeter missions. SIMPL data have been acquired for wide diversity of forest types in the summers of 2010 and 2011 in order to assess the potential of its novel capabilities for characterization of vegetation structure and composition. On each of its four beams SIMPL provides highly-resolved measurements of forest canopy structure by detecting single-photons with 15 cm ranging precision using a narrow-beam system operating at a laser repetition rate of 11 kHz. Associated with that ranging data SIMPL provides eight amplitude parameters per beam unlike the single amplitude provided by typical laser altimeters. Those eight parameters are received energy that is parallel and perpendicular to that of the plane-polarized transmit pulse at 532 nm (green) and 1064 nm (near IR), for both the active laser backscatter retro-reflectance and the passive solar bi-directional reflectance. This poster presentation will cover the instrument architecture and highlight the performance of the SIMPL instrument with examples taken from measurements for several sites with distinct canopy structures and compositions. Specific performance areas such as probability of detection, after pulsing, and dead time, will be highlighted and addressed, along with examples of their impact on the measurements and how they limit the ability to accurately model and recover the canopy properties. To assess the sensitivity of SIMPL's measurements to canopy properties an instrument model has been implemented in the FLIGHT radiative transfer code, based on Monte Carlo simulation of photon transport. SIMPL data collected in 2010 over the Smithsonian Environmental Research Center, MD are currently being modelled and compared to other remote sensing and in situ data sets. Results on the adaptation of FLIGHT to model micropulse, single'photon ranging measurements are presented elsewhere at this conference. NASA's ICESat-2 spaceflight mission, scheduled for launch in 2016, will utilize a multi-beam, micropulse, single-photon ranging measurement approach (although non-polarimetric and only at 532 nm). Insights gained from the analysis and modelling of SIMPL data will help guide preparations for that mission, including development of calibration/validation plans and algorithms for the estimation of forest biophysical parameters.

Dabney, Philip W.↗

Effect of Wind Speed on Aerosol Optical Depth over Remote Oceans, Based on Data from the Maritime Aerosol Network

The Maritime Aerosol Network (MAN) has been collecting data over the oceans since November 2006. The MAN archive provides a valuable resource for aerosol studies in maritime environments. In the current paper we investigate correlations between ship-borne aerosol optical depth (AOD) and near-surface wind speed, either measured (onboard or from satellite) or modeled (NCEP). According to our analysis, wind speed influences columnar aerosol optical depth, although the slope of the linear regression between AOD and wind speed is not steep (approx. 0.004 - 0.005), even for strong winds over 10m/s. The relationships show significant scatter (correlation coefficients typically in the range 0.3 - 0.5); the majority of this scatter can be explained by the uncertainty on the input data. The various wind speed sources considered yield similar patterns. Results are in good agreement with the majority of previously published relationships between surface wind speed and ship-based or satellite-based AOD measurements. The basic relationships are similar for all the wind speed sources considered; however, the gradient of the relationship varies by around a factor of two depending on the wind data used

Smirnov, A.↗

Remote sensing of biomass of salt marsh vegetation in France

Spectral data (gathered using a hand-held radiometer) and harvest data were collected from four salt marsh vegetation types in Brittany, France, to develop equations predicting live aerial biomass from spectral measurements. Remote sensing estimates of biomass of the general salt marsh community (GSM) and of Spartina alterniflora can be obtained throughout the growing season if separate biomass prediction equations are formulated for different species mixtures (for the GSM) and for different canopy types (for S. alterniflora). Results suggest that remote sensing will not be useful for predicting Halimione portulacoides biomass, but can be used to estimate Puccinellia maritima biomass early in the growing season.

Gross, M. F.↗

Validation of SO2 Retrievals from the Ozone Monitoring Instrument over NE China

The Dutch-Finnish Ozone Monitoring Instrument (OMI) launched on the NASA Aura satellite in July 2004 offers unprecedented spatial resolution, coupled with contiguous daily global coverage, for space-based UV measurements of sulfur dioxide (SO2). We present a first validation of the OMI SO2 data with in situ aircraft measurements in NE China in April 2005. The study demonstrates that OMI can distinguish between background SO2 conditions and heavy pollution on a daily basis. The noise (expressed as the standard deviation,sigma) is approximately 1.5 DU (Dobson units; 1 DU = 2.69 10 (exp 16) molecules/cm (exp 2)) for instantaneous field of view boundary layer (PBL) SO2 data. Temporal and spatial averaging can reduce the noise to sigma approximetly 0.3 DU over a remote region of the South Pacific; the long-term average over this remote location was within 0.1 DU of zero. Under polluted conditions collection 2 OMI data are higher than aircraft measurements by a factor of two. Improved calibrations of the radiance and irradiance data (collection 3) result in better agreement with aircraft measurements on polluted days. The air mass corrected collection 3 data still show positive bias and sensitivity to UV absorbing aerosols. The difference between the in situ data and the OMI SO2 measurements within 30 km of the aircraft profiles was about 1 DU, equivalent to approximately 5 ppb from 0 to 3000 m altitude. Quantifying the SO2 and aerosol profiles and spectral dependence of aerosol absorption between 310 and 330 nm are critical for an accurate estimate of SO2 from satellite UV measurements.

Krotkov, Nickolay A.↗

Chlorophyll- a dynamics in the lower Amazon River: insights from in situ and hyperspectral remote sensing using OCI-PACE

Chlorophyll-a concentration (Chla) is a key indicator of phytoplankton biomass and aquatic trophic status. However, satellite-derived Chla in sediment-rich waters, such as those found in the Lower Amazon River, remains challenging. The present study characterizes in situ Chla levels and their relationships with geographic, physical, and biogeochemical parameters in the Lower Amazon. Data collected between 2014 and 2017 across four hydrological seasons included measurements of Chla, remote sensing reflectance, and water quality parameters such as total suspended sediment, conductivity, water surface temperature, dissolved oxygen, pH, dissolved organic carbon and coloured dissolved organic matter. An empirical model was developed to estimate Chla using simulated hyperspectral bands from NASA’s PACE mission, achieving high performance (R 2 = 0.76; RMSE = 0.11 μg·L −1 ). Red bands proved particularly effective for Chla retrieval, while the addition of ultraviolet bands further enhanced model accuracy. The application of the developed model to satellite imagery yielded results consistent with in situ observations for the same hydrologic season. Seasonal variation and geographic location were major factors influencing Chla dynamics. This study provides a novel contribution to Chla estimation in optically complex, highly turbid waters and highlights the potential of the PACE mission to enhance global aquatic ecosystem monitoring. In conclusion, by offering freely available hyperspectral data with high radiometric resolution, PACE represents a significant advancement in the realm of remote sensing of aquatic environments.

Amazon River↗

Collecting and Processing Earth Science Data Metrics at NASA ESDIS

Since the launch of Terra satellite in 1999, the number of Earth Science remote sensing data products created and distributed by NASA's Earth Observing System (EOS) Data and Information System (EOSDIS) has increased from a few hundred to nearly ten thousand. NASA's Earth Science Data and Information System (ESDIS) Metrics System (EMS) collects metrics on data ingest, archive, and distribution by its Distributed Active Archive Centers (DAACs) and the Science Investigator-led Systems (SIPS), known as Data Providers. These metrics are critical in helping NASA management as well as data producers in resource planning and gaining a wide range of knowledge of data users and data usage.EMS receives flat files, or log files of data archive, ingest, and distribution either in their raw format, such as Apache web logs, or text files of log records formatted by the Data Providers. Tens of millions of records are processed each day to extract metrics on data products, user information, distribution protocols and services, and so on. The metrics are then made available to designated parties.This presentation provides an overview of the EMS processing workflow and improvement efforts made in recent years to handle ever-increasing number of data records and new metrics requirements, discusses several key steps including mapping log records to data products and identifying user communities along with geo-distribution, and demonstrates typical metrics capabilities produced by the EMS system. Challenges and potential approaches to improve the system are also discussed.

Pan, Jianfu↗

Development and Flight Testing of an Adaptive Vehicle Health-Monitoring Architecture

On going development and testing of an adaptable vehicle health-monitoring architecture is presented. The architecture is being developed for a fleet of vehicles. It has three operational levels: one or more remote data acquisition units located throughout the vehicle; a command and control unit located within the vehicle, and, a terminal collection unit to collect analysis results from all vehicles. Each level is capable of performing autonomous analysis with a trained expert system. The expert system is parameterized, which makes it adaptable to be trained to both a user's subject reasoning and existing quantitative analytic tools. Communication between all levels is done with wireless radio frequency interfaces. The remote data acquisition unit has an eight channel programmable digital interface that allows the user discretion for choosing type of sensors; number of sensors, sensor sampling rate and sampling duration for each sensor. The architecture provides framework for a tributary analysis. All measurements at the lowest operational level are reduced to provide analysis results necessary to gauge changes from established baselines. These are then collected at the next level to identify any global trends or common features from the prior level. This process is repeated until the results are reduced at the highest operational level. In the framework, only analysis results are forwarded to the next level to reduce telemetry congestion. The system's remote data acquisition hardware and non-analysis software have been flight tested on the NASA Langley B757's main landing gear. The flight tests were performed to validate the following: the wireless radio frequency communication capabilities of the system, the hardware design, command and control; software operation and, data acquisition, storage and retrieval.

Woodard, Stanley E.↗

Global climatology and variability of potential new production estimated from remote sensing of sea-surface temperature

During this project we have collected numerous shipboard data-bases of oceanic nitrate and silicate versus temperature for both equatorial and coastal upwelling regions. These cruises all have accompanying N-15 measurements of new production. The inverse relationships between nutrients and temperatures have been determined and are being used to obtain surface nutrient fields from sea surface temperatures measured remotely by satellite borne sensors- i.e. AVHRR data from NOAA satellites contained in the MCSST data set for the world ocean provided by the University of Miami. The images and data derived from space in this way show the strong seasonal fluctuations and interannual el Nino fluctuations of the nitrate field. the nitrate data has been used to make estimates of new production for the equatorial pacific which are compared with shipboard measurements when available. The importance of silicate as a nutrient driving new production and the ratio of nitrate to silicate has been discovered to be crucial to better understand the causes of new production variability, so we have added these parameters to our study and have begun to make estimates of these for the equatorial Pacific, derived from the weekly averaged sea surface temperatures (SSTs).

Dugdale, Richard C.↗

Overview of SnowEx Year 1 Activities

SnowEx is a multi-year airborne snow campaign with the primary goal of addressing the question: How much water is stored in Earths terrestrial snow-covered regions? Year 1 (2016-17) focused on the distribution of snow-water equivalent (SWE) and the snow energy balance in a forested environment. The year 1 primary site was Grand Mesa and the secondary site was the Senator Beck Basin, both in western, Colorado, USA. Nine sensors on five aircraft made observations using a broad range of sensing techniques, active and passive microwave, and active and passive optical infrared to determine the sensitivity and accuracy of these potential satellite remote sensing techniques, along with models, to measure snow under a range of forest conditions. SnowEx also included an extensive range of ground truth measurements in-situ manual samples, snow pits, ground based remote sensing measurements, and sophisticated new techniques. A detailed description of the data collected will be given and some preliminary results will be presented.

snow↗

Hot-Carrier Injection and Millisecond Charge Separation from a Robust Heteroleptic Iron(II) Chromophore Immobilized on TiO 2

The synthesis, spectroscopic characterization, computational analysis, and photoelectrochemical behavior of a new iron-based chromophore, [(Cpy) 2 Fe- (deeb)](PF 6 ) 2 (Fe(Cpy) 2 (deeb)), where Cpy is 1-methyl-3-(2-pyridyl)imidazole and deeb is 4,4’-(CO 2 CH 2 CH 3 ) 2 -2,2’-bipyridine, is reported. Electrochemically reversible waves assigned to a metal-centered E o (Fe III/II ) = +0.48 and a ligand-centered E o (Fe 2+/+ ) = −1.47 V vs Fc +/0 reduction were evident in cyclic voltammetry measurements. The combination of a strong σ-donor and a π-acceptor lowered the energy of the metal-toligand charge-transfer (MLCT) excited state relative to the metal-centered state. Two MLCT transitions appear in the visible region at 424 and 580 nm. TDDFT calculations revealed that the lower-energy band was well formulated as Fe(II)→deeb, and the higher-energy transition was charge transfer to both the deeb and Cpy ligands. Resonance Raman spectroscopy supports these findings showing enhanced deeb vibrational modes with 532 nm excitation, both deeb and Cpy modes with 473 nm excitation, and exclusively Cpy with 405 nm excitation. Ultrafast spectroscopy reveals a short-lived (∼2 ps) MLCT excited state and a longer-lived (∼20 ps) metal-centered state. Efficient methods to deprotect the ester groups and anchor the complex to mesoporous TiO 2 (anatase) thin films in high surface coverages, Fe(Cpy) 2 (dcb)|TiO 2 σ = 3 × 10 −8 mol/cm 2 , were established. Pulsed light excitation of Fe(Cpy) 2 (dcb)|TiO 2 resulted in rapid excited state injection (k inj > 10 8 s −1 ) and formation of a charge-separated state, Fe III (Cpy) 2 (dcb)|TiO 2 (e), which persists on the millisecond time scale before returning cleanly to the ground state with secondorder kinetics. Injection yields measured 50 ns after light excitation were found to double from Φ = 0.15 with green (532 nm) light to 0.30 with blue (457 nm) light excitation. Incident photon-to-current efficiency (% IPCE) measurements as a function of excitation wavelength in a 0.5 M LiI/I 2 /CH 3 CN electrolyte provide clear evidence for band-selective “hot carrier” injection from the remote Cpy-localized excited state. Collectively, the spectroscopic and photoelectrochemical data indicate that a semiconductor can intercept hot electrons from iron chromophores even when the excited-state dipole is oriented away from the surface-anchoring ligand.

Charge transfer↗