Search NASA⌕ Search

SEARCH · Search NASA

Results for “selective doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Structural and thermodynamic consideration of metal oxide doped GeO{sub 2} for gate stack formation on germanium

A systematic investigation was carried out on the material and electrical properties of metal oxide doped germanium dioxide (M-GeO{sub 2}) on Ge. We propose two criteria on the selection of desirable M-GeO{sub 2} for gate stack formation on Ge. First, metal oxides with larger cation radii show stronger ability in modifying GeO{sub 2} network, benefiting the thermal stability and water resistance in M-GeO{sub 2}/Ge stacks. Second, metal oxides with a positive Gibbs free energy for germanidation are required for good interface properties of M-GeO{sub 2}/Ge stacks in terms of preventing the Ge-M metallic bond formation. Aggressive equivalent oxide thickness scaling to 0.5 nm is also demonstrated based on these understandings.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Carbon Defect Characterization of Nitrogen-Doped Reduced Graphene Oxide Electrocatalysts for the Two-Electron Oxygen Reduction Reaction

Numerous modified-carbon catalysts have been developed for the direct synthesis of hydrogen peroxide through electrochemical oxygen reduction. Yet, given the complex structure of most porous carbons and the poor oxygen reduction reaction (ORR) selectivity typically observed when they are used as catalysts, it is still unclear which carbon defects are responsible for the high two-electron ORR activity typically observed in these materials. Here, we study electrocatalytic peroxide formation activity of nitrogen-doped reduced graphene oxide ( N -rGO) materials to relate carbon defects to electrocatalytic activity. To achieve this, we selected two N -rGO electrodes that selectively produce peroxide at all potentials studied (0.70–0.10 V vs RHE) under alkaline conditions. Oxygen reduction studies, combined with material characterization, especially solid-state 13 carbon nuclear magnetic resonance coupled with magic angle spinning and cross-polarization, demonstrate that epoxy or ether groups in the N -rGO catalyst are likely associated with the active sites that form peroxide at the lowest overpotential in alkaline media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Designing Boron Nitride Islands in Carbon Materials for Efficient Electrochemical Synthesis of Hydrogen Peroxide

Heteroatom-doped carbons have drawn increasing research interest as catalysts for various electrochemical reactions due to their unique electronic and surface structures. In particular, co-doping of carbon with boron and nitrogen has been shown to provide significant catalytic activity for oxygen reduction reaction (ORR). However, limited experimental work has been done to systematically study these materials, and much remains to be understood about the nature of the active site(s), particularly with regards to the factors underlying the activity enhancements of these boron–carbon–nitrogen (BCN) materials. Herein, we prepare several BCN materials experimentally with a facile and controlled synthesis method, and systematically study their electrochemical performance. We demonstrate the existence of h -BN domains embedded in the graphitic structures of these materials using X-ray spectroscopy. These synthesized structures yield higher activity and selectivity toward the 2e – ORR to H 2 O 2 than structures with individual B or N doping. We further employ density functional theory calculations to understand the role of a variety of h -BN domains within the carbon lattice for the ORR and find that the interface between h -BN domains and graphene exhibits unique catalytic behavior that can preferentially drive the production of H 2 O 2 . Here, to the best of our knowledge, this is the first example of h -BN domains in carbon identified as a novel system for the electrochemical production of H 2 O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Low resistance Ohmic contact to p-type crystalline silicon via nitrogen-doped copper oxide films

This work explores the application of transparent nitrogen doped copper oxide (CuO{sub x}:N) films deposited by reactive sputtering to create hole-selective contacts for p-type crystalline silicon (c-Si) solar cells. It is found that CuO{sub x}:N sputtered directly onto crystalline silicon is able to form an Ohmic contact. X-ray photoelectron spectroscopy and Raman spectroscopy measurements are used to characterise the structural and physical properties of the CuO{sub x}:N films. Both the oxygen flow rate and the substrate temperature during deposition have a significant impact on the film composition, as well as on the resulting contact resistivity. After optimization, a low contact resistivity of ∼10 mΩ cm{sup 2} has been established. This result offers significant advantages over conventional contact structures in terms of carrier transport and device fabrication.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Selective and Stable Ethanol Synthesis via Electrochemical CO 2 Reduction in a Solid Electrolyte Reactor

Electrochemical CO 2 reduction to ethanol faces challenges such as low selectivity, a product mixture with liquid electrolyte, and poor catalyst/reactor stability. Here, we developed a grain-rich zinc-doped Cu 2 O precatalyst that presented a high ethanol Faradaic efficiency of over 40% under a current density of 350 mA·cm –2 . Our density functional theory (DFT) simulation suggested that Zn atoms inside the structure have a greater carbophilicity than the Cu atoms to help facilitate *CHCHO formation, a key reaction intermediate toward ethanol instead of other C 2 products. Here, a high Faradaic efficiency ratio between ethanol and ethylene (FE EtOH /FE C2H4 ) reached 2.34 in the zinc-doped Cu 2 O precatalyst, representing an over 4-fold improvement compared to bare Cu 2 O precatalyst. By integrating this Cu-based catalyst into a porous solid electrolyte (PSE) reactor with a salt-managing design, we achieved stable ethanol production for over 180 h under a current density of 250 mA·cm –2 while maintaining ethanol selectivity at ~30%.

09 BIOMASS FUELS↗
DOE OSTI2017

Structural and Dielectric Properties of Rare Earth Doped Lithium Nanoferrites for Sensing Applications

Nowadays it is the hot topic to analyze the behavior of different materials towards gasses so that they can be used for sensing purpose. Ferrites specifically lithium ferrites show very good response to gasses present in the environment. Lithium ferrite doped with Gd (Li{sub 0.5}Fe{sub 2.475}Gd{sub 0.025}O{sub 4}) was selected for this purpose. Sample was synthesized by simplified sol-gel technique. After that, pellets were formed and sintered at different temperatures. Spinel cubic phase was observed in x-ray diffraction (XRD). It is noted that by increasing sintering temperature, results slightly decrease in lattice constant. Scanning electron microscopy (SEM) was used to study the surface morphology of the samples. It was observed that particles were spherical in shape. AC electrical properties were studied at room temperature in the frequency range of 20 Hz to 3 MHz. AC electrical conductivity and dielectric constant decreased with the increase in sintering temperature. The maximum conductivity was observed in the sample that was sintered at temperature of 700 {sup ∘}C. Significant variation in electrical response with frequency made these samples suitable for sensing applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

High-Selectivity Electrochemical Conversion of CO 2 to Ethanol using a Copper Nanoparticle/N-Doped Graphene Electrode

Carbon dioxide is a pollutant, but also a potential carbon source provided an efficient means to convert it to useful products. Herein we report a nanostructured catalyst for the direct electrochemical reduction of dissolved CO 2 to ethanol with high Faradaic efficiency (63%) and high selectivity (84%). The catalyst is comprised of Cu nanoparticle on a highly textured, N-doped graphene film. Detailed electrochemical analysis and complementary DFT calculations indicate a novel mechanism in which multiple active sites, working sequentially, control the coupling of carbon monoxide radicals and mediate the subsequent electrochemical reduction to alcohol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Nitrogen-Doped Graphene Oxide Electrocatalysts for the Oxygen Reduction Reaction

Platinum group metal-free (PGM-free) electrocatalysts for the oxygen reduction reaction (ORR) often exhibit a complex functionalized graphitic structure. Because of this complex structure, limited understanding exists about the design factors for the synthesis of high-performing materials. Graphene, a two-dimensional hexagonal structure of carbon, is amenable to structural and functional group modifications, making it an ideal analogue to study crucial properties of more complex graphitic materials utilized as electrocatalysts. In this paper, we report the synthesis of active nitrogen-doped graphene oxide catalysts for the ORR in which their activity and four-electron selectivity are enhanced using simple solvent and electrochemical treatments. The solvents, chosen based on Hansen’s solubility parameters, drive a substantial change in the morphology of the functionalized graphene materials by (i) forming microporous holes in the graphitic sheets that lead to edge defects and (ii) inducing 3D structure in the graphitic sheets that promotes ORR. Additionally, the cycling of these catalysts has highlighted the multiplicity of the active sites, with different durability, leading to a highly selective catalyst over time, with a minimal loss in performance. High ORR activity was demonstrated in an alkaline electrolyte with an onset potential of ~1.1 V and half-wave potential of 0.84 V vs RHE. Furthermore, long-term stability potential cycling showed minimal loss in half-wave potential (<3%) in both N 2 - and O 2 -saturated solutions with improved selectivity toward the four-electron reduction after 10000 cycles. Lastly, the results described in this work provide additional understanding about graphitic electrocatalysts in alkaline media that may be utilized to further enhance the performance of PGM-free ORR electrocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2015

An efficient low-temperature route to nitrogen-doping and activation of mesoporous carbons for CO 2 capture

We report an innovative strategy for post-synthesis nitrogen-doping of mesoporous carbons (MCs) with high yields (>90%) at low temperatures (230–380 °C) by using a strong base, sodium amide (NaNH 2 ), was developed. The as-prepared N-doped MCs exhibit a significantly enhanced CO 2 adsorption performance in terms of capacity and selectivity when compared to their parent MCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Partitioning and structural role of Mn and Fe ions in ionic sulfophosphate glasses

Ionic sulfophosphate liquids of the type ZnO-Na{sub 2}O-Na{sub 2}SO{sub 4}-P{sub 2}O{sub 5} exhibit surprising glass forming ability, even at slow or moderate cooling rate. As a concept, they also provide high solubility of transition metal ions which could act as cross-linking sites between the sulfate and phosphate entities. It is therefore investigated how the replacement of ZnO by MnO and/or FeO affects the glass structure and the glass properties. Increasing manganese levels are found to result in a monotonic increase of the transition temperature T{sub g} and most of the mechanical properties. This trend is attributed to the change of metal-ion coordination from four-fold around Zn{sup 2+} to six-fold around Mn{sup 2+} ions. The higher coordination facilitates cross-linking of the ionic structural entities and subsequently increases T{sub g}. Raman and infrared spectroscopy show that the structure of these glasses involves only SO{sub 4}{sup 2−} and PO{sub 4}{sup 3−} monomers as well as P{sub 2}O{sub 7}{sup 4-} dimers. Replacement of ZnO by MnO is found to favour PO{sub 4}{sup 3−} over P{sub 2}O{sub 7}{sup 4-} species, a trend which is enhanced by co-doping with FeO. Both transition metal ions show, like Zn{sup 2+}, a preference to selectively coordinate to phosphate anionic species, as opposed to sodium ions which coordinate mainly to sulfate anions. EPR spectroscopy finally shows that divalent Mn{sup 2+} ions are present primarily in MnO{sub 6}-clusters, which, in the studied sulfophosphate glasses, convert upon increasing MnO content from corner-sharing to edge-sharing entities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Rapid subsurface analysis of frequency-domain thermoreflectance images with K-means clustering

K-means clustering analysis is applied to frequency-domain thermoreflectance (FDTR) hyperspectral image data to rapidly screen the spatial distribution of thermophysical properties at material interfaces. Performing FDTR while raster scanning a sample consisting of 8.6 μm of doped-silicon (Si) bonded to a doped-Si substrate identifies spatial variation in the subsurface bond quality. Routine thermal analysis at select pixels quantifies this variation in bond quality and allows assignment of bonded, partially bonded, and unbonded regions. Performing this same routine thermal analysis across the entire map, however, becomes too computationally demanding for rapid screening of bond quality. To address this, K-means clustering was used to reduce the dimensionality of the dataset from more than 20 000 pixel spectra to just K = 3 component spectra. The three component spectra were then used to express every pixel in the image through a least-squares minimized linear combination providing continuous interpolation between the components across spatially varying features, e.g., bonded to unbonded transition regions. Fitting the component spectra to the thermal model, thermal properties for each K cluster are extracted and then distributed according to the weighting established by the regressed linear combination. Thermophysical property maps are then constructed and capture significant variation in bond quality over 25 μm length scales. The use of K-means clustering to achieve these thermal property maps results in a 74-fold speed improvement over explicit fitting of every pixel.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Study program to improve the open-circuit voltage of low resistivity single crystal silicon solar cells

The results of a 14 month program to improve the open circuit voltage of low resistivity silicon solar cells are described. The approach was based on ion implantation in 0.1- to 10.0-ohm-cm float-zone silicon. As a result of the contract effort, open circuit voltages as high as 645 mV (AMO 25 C) were attained by high dose phosphorus implantation followed by furnace annealing and simultaneous SiO2 growth. One key element was to investigate the effects of bandgap narrowing caused by high doping concentrations in the junction layer. Considerable effort was applied to optimization of implant parameters, selection of furnace annealing techniques, and utilization of pulsed electron beam annealing to minimize thermal process-induced defects in the completed solar cells.

Minnucci, J. A.↗
DOE OSTI2021

Compositions and methods for thermoelectric ceramics

In one aspect, the disclosure relates to thermoelectric ceramic oxide compositions comprising a CaMnO 3 ceramic. In a further aspect, the disclosed thermoelectric ceramic oxide compositions can dramatically increase the energy conversion efficiency of thermoelectric through a combination of modifying the chemistry of precursor materials, and simultaneously introducing a metal oxide liquid phase during sintering. In a further aspect, the present disclosure pertains to thermoelectric ceramic oxide compositions comprising a metal doped CaMnO 3 having with a metal oxide grain boundary phase; wherein the metal is selected from group 13, group 14, group 15, group 16, or a rare earth element. In a still further aspect, the disclosure relates to methods for making the thermoelectric ceramic oxide materials. This abstract is intended as a scanning tool for purposes of searching in the particular art and is not intended to be limiting of the present disclosure.

Song, Xueyan↗
DOE OSTI2015

Experimental study of a VBG-based Tm : YLF slab laser at different output coupler parameters

The performance of a Tm : YLF slab laser is studied at different output coupler parameters. Use is made of a 20-mm-long a-cut slab crystal doped with 2.5 at. % thulium ions. With a volume Bragg grating and a Fabry – Perot etalon, the selected output wavelength of this Tm : YLF slab laser is 1908 nm. For the optimised output coupler with a transmission of 20% and a radius of curvature of 300 mm, the output power exceeds 74.1 W and the slope efficiency with respect to the absorbed pump power reaches 48.4%. In addition, the beam quality of the Tm : YLF slab laser is improved. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Observation of Electrically Tunable van Hove Singularities in Twisted Bilayer Graphene from NanoARPES

The possibility of triggering correlated phenomena by placing a singularity of the density of states near the Fermi energy remains an intriguing avenue toward engineering the properties of quantum materials. Twisted bilayer graphene is a key material in this regard because the superlattice produced by the rotated graphene layers introduces a van Hove singularity and flat bands near the Fermi energy that cause the emergence of numerous correlated phases, including superconductivity. Direct demonstration of electrostatic control of the superlattice bands over a wide energy range has, so far, been critically missing. This work examines the effect of electrical doping on the electronic band structure of twisted bilayer graphene using a back-gated device architecture for angle-resolved photoemission measurements with a nano-focused light spot. A twist angle of 12.2° is selected such that the superlattice Brillouin zone is sufficiently large to enable identification of van Hove singularities and flat band segments in momentum space. Finally, the doping dependence of these features is extracted over an energy range of 0.4 eV, expanding the combinations of twist angle and doping where they can be placed at the Fermi energy and thereby induce new correlated electronic phases in twisted bilayer graphene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2008

Gas Sensors Based on Coated and Doped Carbon Nanotubes

Efforts are underway to develop inexpensive, low-power electronic sensors, based on single-walled carbon nanotubes (SWCNTs), for measuring part-per-million and part-per-billion of selected gases (small molecules) at room temperature. Chemically unmodified SWCNTs are mostly unresponsive to typical gases that one might wish to detect. However, the electrical resistances of SWCNTs can be made to vary with concentrations of gases of interest by coating or doping the SWCNTs with suitable materials. Accordingly, the basic idea of the present development efforts is to incorporate thus-treated SWCNTs into electronic devices that measure their electrical resistances.

Li, Jing↗
DOE OSTI2020

Doping of Cr in Graphene Using Electron Beam Manipulation for Functional Defect Engineering

Chromium atoms in graphene have been proposed to exhibit magnetic moments and spin-selective conducting states depending on the local bonding geometry within the graphene structure, which could lead to interesting applications in spintronics. Despite this interest, there are few direct experimental reports of Cr dopants in graphene even though it is theorized to be stable. Here, we demonstrate the introduction of single Cr dopant atoms into the graphene lattice and onto graphene edges through the controlled use of a focused electron beam in a scanning transmission electron microscope. Here, we show local control of doping locations, and when coupled with targeted in situ milling during scanning of the e-beam, these strategies demonstrate an important component of the fabrication of tailored nanostructured devices in the electron microscope. The approach is validated with first-principles calculations to understand synthesis pathways during fabrication and reveal the energetics and local properties of Cr atoms embedded in graphene; for example, Cr doping can convert graphene into a magnetic and semiconducting material, which suggests Cr-doped graphene can be used as a building block for potential electronic devices and a means to construct them.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Doping transition-metal atoms in graphene for atomic-scale tailoring of electronic, magnetic, and quantum topological properties

Atomic-scale fabrication is an outstanding challenge and overarching goal for the nanoscience community. The practical implementation of moving and fixing atoms to a structure is non-trivial considering that one must spatially address the positioning of single atoms, provide a stabilizing scaffold to hold structures in place, and understand the details of their chemical bonding. Free-standing graphene offers a simplified platform for the development of atomic-scale fabrication and the focused electron beam in a scanning transmission electron microscope can be used to locally induce defects and sculpt the graphene. In this scenario, the graphene forms the stabilizing scaffold and the experimental question is whether a range of dopant atoms can be attached and incorporated into the lattice using a single technique and, from a theoretical perspective, we would like to know which dopants will create technologically interesting properties. Here in this paper, we demonstrate that the electron beam can be used to selectively and precisely insert a variety of transition metal atoms into graphene with highly localized control over the doping locations. We use first-principles density functional theory calculations with direct observation of the created structures to reveal the energetics of incorporating metal atoms into graphene and their magnetic, electronic, and quantum topological properties.

36 MATERIALS SCIENCE↗