SEARCH · Search NASA

Results for “separability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

DOE OSTI2017

Balance on the charge generation, separation and transfer performance of different TiO{sub 2} nanostructures in quantum dot sensitized solar cells

Graphical abstract: QDSSCs with different structure: (a) J-V curves, (b) TRPL spectra. - Highlights: • Charge generation, separation and transfer performance have been balanced by different structures. • Excellent charge separation and transfer performance have been exhibited for nano-array structure. • Nanotube array structure relative better charge generation, excellent charge separation and transfer performance of QDSSCs. - Abstract: TiO{sub 2} nanoparticle and nano-array structures including nanorods, nanowires and nanotubes are prepared for the photo-electrodes of CuInS{sub 2} quantum dot sensitized solar cells, which are investigated the balance on charge generation, separation and transfer performance in solar cells. The optical absorption properties and PL spectra of different photo-electrodes are investigated, which indicates better charge generation property for nanoparticle structure and better charge separation property for nano-arrays structure. With the grain boundary of nanoparticle films and excellent charge transfer performance of nano-arrays films, higher short-circuit current density value has been performed for all the nano-array structure based solar cells. Due to the relative large surface area of three nano-arrays structure for charge generation, excellent charge separation and transfer performance, the TiO{sub 2} nanotube based CuInS{sub 2} quantum dot sensitized solar cells exhibits greater photovoltaic efficiency than other nanostructures, which can support the progress for further photovoltaic performance enhancement on quantum dot sensitized solar cells.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Separation characteristics of cations and natural organic matter in electrodialysis

Natural organic matter (NOM) in water can cause the formation of disinfection byproducts (DBPs) when NOM reacts with a disinfectant such as chlorine. Nanofiltration (NF) and reverse osmosis (RO) are effective treatment methods to remove NOM. However, the simultaneous presence of both NOM and divalent cations such as Ca 2+ can enhance fouling in NF and RO. Therefore, an appropriate pretreatment to remove such cations before NF or RO would delay fouling and perhaps improve water recovery and NOM removal efficiency. Electrodialysis (ED) is potentially an excellent pretreatment method because it separates inorganic ions well using ion exchange membranes (IEMs) but does not separate NOM well because of its size and consequent low diffusivity. This research focused on ion and NOM separation with ED using three different types of commercially available IEM pairs, two different commercially available NOM sources, and six different influents at 500 mg/L total dissolved solids in the presence or absence of both hardness (Ca 2+ and Mg 2+ ) and NOM. The target waters of interest in this research were drinking water supplies that require little or no desalination but substantial removal of NOM; after NOM separation in NF or RO, some or all of the ED concentrate can be added to the NF/RO permeate to create the finished water prior to disinfection. The results indicate that ED can effectively separate alkaline earth metal ions without separation of NOM. Cation exchange membranes with high exchange capacity, high selectivity for divalent cations are desirable, and both anion and cation exchange membranes should have low affinity for organic adsorption. As a result, the process would work particularly well for NOM with relatively low hydrophobicity, since NOM adsorption to most surfaces increases with hydrophobicity.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Fiber Sorbents – A Versatile Platform for Sorption-Based Gas Separations

Increasing demand for high-purity fine chemicals and a drive for process intensification of large-scale separations have driven significant work on the development of highly engineered porous materials with promise for sorption-based separations. While sorptive separations in porous materials offer energy-efficient alternatives to longstanding thermal-based methods, the particulate nature of many of these sorbents has sometimes limited their large-scale deployment in high-throughput applications such as gas separations, for which the necessary high feed flow rates and gas velocities accrue prohibitive operational costs. These processability limitations have been historically addressed through powder shaping methods aimed at the fabrication of structured sorbent contactors based on pellets, beads or monoliths, commonly obtained as extrudates. These structures overcome limitations such as elevated pressure drops commonly recorded across powder adsorption beds but often accrue thermal limitations arising from elevated particle density and aggregation, which ultimately cap their maximum separation performance. Furthermore, the harsh mechanical strain to which powder particles are subjected during contactor fabrication, in the form of extrusion/compression forces, can result in partial pore occlusion and framework degradation, further limiting their performance. Here, we present the development of porous fiber sorbents as an alternative sorbent contactor design capable of addressing sorbent processability limitations while enabling an array of performance-maximizing heat integration capabilities. This new sorbent form factor leverages pre-existing know-how from hollow fiber spinning to produce fiber-shaped sorbent contactors through the phase inversion of known polymers in a process known as dry-jet/wet quenching. The process of phase inversion allows microporous sorbent particles to be latched onto a macroporous polymer matrix under mild processing conditions, thus making it compatible with soft porous materials prone to amorphization under traditional pelletization conditions. Sorbent fibers can be created with different geometries through control of the spinning apparatus and process, offering the possibility to produce monolithic and hollow fibers alike, the latter of which can be integrated with thermalization fluid flows. In this Account, we summarize our progress in the field of fiber sorbents from both design and application standpoints. We further guide the reader through the evolution of this field from the early inceptive work on zeolite hollow fibers to recent developments on MOF fibers. We highlight the versatile nature of fiber sorbents, both from the composition, fabrication and structure points of view, and further demonstrate how fiber sorbents offer alternative paths in tackling new and challenging chemical separation challenges like direct air capture (DAC), with a final perspective on the future of the field.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Improved Sensitivity and Separations for Phosphopeptides using Online Liquid Chromotography Coupled with Structures for Lossless Ion Manipulations Ion Mobility–Mass Spectrometry

Phosphoproteomics greatly augments proteomics and holds tremendous potential for insights into the modulation of biological systems for various disease states, etc. However, numerous challenges hinder conventional methods in terms of measurement sensitivity, throughput, and capabilities for confident phosphopeptide and phosphosite identification. In this work, we report the first example of integrating structures for lossless ion manipulations ion mobility (SLIM) IM-MS with online reversed-phase liquid chromatography (LC) to evaluate its potential for addressing the aforementioned challenges. A mixture of 51 heavy-labeled phosphopeptides was analyzed with a SLIM IM module having integrated ion accumulation and long-path separation regions. The SLIM IM-MS provided improved sensitivity over an established LC-SRM method, with limits of detection as low as 50 pM (50 amol/µl) for several peptides. Conventionally problematic phosphopeptide isomers could be resolved following an 18 m SLIM IM separation. The 2-D peak capacity was estimated as ~9000 for 90 min LC separation coupled to an 18 m SLIM IM separation, considerably higher than LC alone and providing a basis for both improved identification and quantification, with additional gains projected with the future use of longer path SLIM IM separations. Thus, LC-SLIM IM-MS offers great potential for improving the sensitivity, separation, and throughput of phosphoproteomics analyses.

Chouinard, Christopher D.↗

DOE OSTI2019

SLIM Ultrahigh Resolution Ion Mobility Spectrometry Separations of Isotopologues and Isotopomers Reveal Mobility Shifts due to Mass Distribution Changes

We report on separations of ion isotopologues and isotopomers using ultrahigh-resolution traveling wave-based Structures for Lossless Ion Manipulations with serpentine ultralong path and extended routing ion mobility spectrometry coupled to mass spectrometry (SLIM SUPER IMS-MS). Mobility separations of ions from the naturally occurring ion isotopic envelopes (e.g., [M], [M+1], [M+2]…ions) showed the first and second isotopic peaks (i.e. [M+1] and [M+2]) for various tetraalkylammonium ions could be resolved from their respective monoisotopic ion peak ([M]) after SLIM SUPER IMS with resolving powers of ~400-600. Similar separations were obtained for other compounds (e.g., tetrapeptide ions). Greater separation was obtained using argon versus helium drift gas, as expected from the greater reduced mass contribution to ion mobility described by the Mason-Schamp relationship. To more directly explore the role of isotopic substitutions, we studied a mixture of specific isotopically substituted (15N, 13C, and 2H) protonated arginine isotopologues. While the separations in nitrogen were primarily due to their reduced mass differences, similar to the naturally occurring isotopologues, their separations in helium, where higher resolving powers could also be achieved, revealed distinct additional relative mobility shifts. These shifts appeared correlated, after correction for the reduced mass contribution, with changes in the ion center of mass due to the different locations of heavy atom substitutions. The origin of these apparent mass distribution- induced mobility shifts was then further explored using a mixture of Iodoacetyl Tandem Mass Tag (iodoTMT) isotopomers (i.e. each having the same exact mass, but with different isotopic substitution sites). Again, the observed mobility shifts appeared correlated with changes in the ion center of mass leading to multiple monoisotopic mobilities being observed for some isotopomers (up to a ~0.04% difference in mobility). These mobility shifts thus appear to reflect details of the ion structure, derived from the changes due to ion rotation impacting collision frequency or momentum transfer, and highlight the potential for new approaches for ion structural characterization.

Isotopologues, isotopomers, SLIM, Ion Mobility Spe↗

DOE OSTI2020

Solvent Selection for the Separation of Lignin-Derived Monomers Using the Conductor-like Screening Model for Real Solvents

The separation of desired monomers from a liquid-phase mixture of lignin depolymerization products is necessary to facilitate their upscaling and upgrading for industrial applications. One effective method to separate multiple liquid-phase products is countercurrent chromatography (CCC), which is a common liquid chromatography technique that separates target solutes based on differences in their partitioning in a biphasic solvent system. Effective CCC separation requires the selection of solvent compositions to tune solute partition coefficients. Here, to alleviate the experimental burden of selecting optimal solvent systems, we apply the conductor-like screening model for real solvents (COSMO-RS) method to compute partition coefficients of representative lignin monomers from four currently used depolymerization strategies in standard solvent systems. We further design new ternary and quaternary solvent systems that are predicted to further improve separation efficacy. On the basis of these predicted partition coefficients and empirical solvent selection criteria for CCC measurements, we suggest a range of solvent systems that would be suitable for the effective separation of aromatic lignin-derived products via CCC or similar liquid–liquid extraction methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Single-Molecule Fluorescence Investigations of Solute Transport Dynamics in Nanostructured Membrane Separation Materials

Many materials used for membrane separations comprise of nanoscale structures such as pores and domains. Such nanostructures often control the solute permeability and selectivity of separation membranes. Thus, for future development of highly efficient separation membranes, it is important to understand the structural and chemical properties of these nanostructures, and also their influences on solute transport dynamics. For the last two decades, single-molecule fluorescence techniques have been used to measure the detailed dynamics of solute molecules diffusing in various nanostructured materials, giving valuable insights into molecular transport mechanisms influenced by nanoscale material heterogeneity. This Perspective will discuss recent single-molecule fluorescence studies on solute diffusion in materials relevant to membrane separations, including dense polymer films and nanoporous materials. These studies have revealed the formation and properties of nanostructures, and unique transport dynamics of solute molecules manipulated by their confinement and partitioning to the nanostructures, which play key roles in membrane separations. Furthermore, this Perspective will also point out scientific challenges toward thorough understanding of molecular-level mechanisms in membrane separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Flexible MOFs as Pressure-Tunable Filters for Hydrocarbon Separation

Metal–organic frameworks (MOFs) hold significant promise for separating gas mixtures, especially hydrocarbons. While the main focus in the field is the development of new adsorbents for specific separations of binary mixtures, a preferable situation would be using a single framework for separating various species. This has been achieved in some flexible MOFs, where ternary mixtures can be separated at different temperatures. Here, we propose a simple yet fascinating way of utilizing the flexibility of MOFs to create tunable filters as a function of external pressure. We thus replace the more costly temperature-driven tunability with a cost-efficient external-pressure tunability. As a proof-of-concept, we select the CaMOF flexible framework for C6 hydrocarbon separation, however, our results are applicable to other flexible framework and gas molecules. Furthermore, our findings provide mechanistic insight and guidelines to engineer separation filters by designing flexible pores with critical sizes that can be effectively manipulated by external pressure.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Significance of a Solid Electrolyte Interphase on Separation of Anode and Cathode Materials from Spent Li-Ion Batteries by Froth Flotation

The separation of electrode active materials from spent Li-ion batteries (LIBs) by froth flotation is challenging due to the changes in surface properties of electrode active materials from cycling as well as the presence of organic binders. In this work, the froth flotation separation of aged anode and cathode composite materials from spent LIBs was systematically investigated after the materials were heat treated. The results show that aged anode and cathode materials from spent LIBs can be well separated from each other after a heating process in air at 400 degrees C and at which some of the PVDF binder remains intact. The underlying mechanism was investigated by X-ray photoelectron spectroscopy (XPS), contact angle measurements, and scanning transmission electron microscopy (STEM) coupled with energy-dispersive X-ray spectroscopy (EDX). The results from the XPS and contact angle measurements show that there is a hydrophilic and oxygen-rich layer on the surface of aged anode materials. This hydrophilic surface, associated with the solid electrolyte interface (SEI) layer, impacts the froth flotation process significantly. The results also show that both the SEI layers and PVDF binder residues on the surface are removed at 400 degrees C for an hour, restoring the hydrophobicity of the anode materials, which, in turn, benefits the separation of anode and cathode materials. The STEM/EDX elemental analysis data confirms that there are 20 nm-thick oxygen-rich SEI layers on the surfaces, which can be removed after a heating process. The present result illustrates the significance of the SEI layers in flotation separation of electrode materials and sheds new lights into the future development of the recycling processes for the separation of anode and cathode composite materials from spent Li-ion batteries.

25 ENERGY STORAGE↗

DOE OSTI2025

Customizable Aperture Geometry in Metal–Organic Frameworks for Kinetic Hydrocarbon Separation

Precise control of aperture dimensions is crucial in adsorptive separations of hydrocarbons, as it directly affects key parameters such as selectivity, capacity, diffusion, and recyclability. The development of metal–organic frameworks (MOFs) has enabled the fine-tuning of local pore environments to address important hydrocarbon separations. However, customizing the aperture geometry to tune the kinetic separation performance remains challenging. Here, we deploy a mixed-linker synthesis strategy, combining long and short linkers on fcu net Zr-MOFs with equilateral triangular apertures to construct isoreticular multivariate MOFs, NU-415 and NU-416, with tailored isosceles triangular apertures suitable for the separation of hexane isomers. Sorption, liquid batch separation, and X-ray diffraction measurements demonstrate significantly improved selectivity, capacity, stability, and recyclability of NU-415 and NU-416 compared with Zr-muconate and MOF-801. Notably, both NU-415 and NU-416 achieve uptake capacities of 2.2 mmol g –1 in 1 min with an n-hexane to 2,2-dimethylbutane selectivity over 200 in an equimolar ternary mixture at ambient conditions, comparable to leading reported materials. Mechanistic studies confirm that separation performance is predominantly governed by significant kinetic differences rather than by thermodynamics. Furthermore, the successful customization of aperture geometry not only enables superior linear to monobranched hexane selectivity in NU-415 but also demonstrates the mixed-linker synthesis strategy as a promising solution for precise and predictable pore architecture control in MOFs.

Adsorption↗

DOE OSTI2025

Solvent Polarity Independent Symmetry-Breaking Charge Separation in a Slip-Stacked Covalent Terrylene Monoimide Dimer

The design of organic materials capable of efficient photoinduced charge separation in low-polarity environments is a critical challenge for advancing organic photovoltaics. Symmetry-breaking charge separation (SB-CS) offers a promising route to efficient charge separation with minimal energy loss; however, in conventional organic materials this process typically relies on polar solvents to stabilize the charge-separated state. Here, we investigate a slip-stacked terrylene monoimide dimer (TMI 2 ) engineered with intrinsic electronic asymmetry to circumvent this limitation. We demonstrate through a comprehensive suite of ultrafast spectroscopic techniques that TMI 2 undergoes remarkably efficient SB-CS regardless of solvent polarity enabled by the permanent dipole moment of TMI and the accessible intramolecular charge-transfer (ICT) character of its monomer units. Furthermore, analysis of vibronic coherences reveals that the initial state mixing is actively driven by a 193 cm –1 intermolecular mode, while the final SB-CS state is marked by a distinct vibrational fingerprint of the radical ion pair product. Our findings reveal how the intrinsic electronic asymmetry of the TMI monomers that constitute TMI 2 creates an efficient charge separation pathway that precludes the need for external stabilization from a polar solvent. Here, this work establishes a powerful molecular design principle for leveraging intrinsic monomeric asymmetry to achieve efficient charge separation in low-dielectric environments, with significant implications for the development of next-generation organic optoelectronic materials.

Aromatic compounds↗

DOE OSTI2026

Lanthanide Separations through Helicate Self-Assembly

Skyrocketing demand for rare-earth elements makes their isolation and reuse from electronic waste an increasingly attractive alternative to mining. Typically, the capture of individual lanthanides from mixtures requires the iterative design of complex, macrocyclic ligands, a sometimes successful but often laborious process. Here we show that the self-assembly of rare-earth ions with a ditopic ligand, L d , results in the selective incorporation of smaller lanthanides and gives rise to impressive separation factors. Comparison to a monotopic ligand, L m , shows that the separation performance of ditopic L d critically depends on the presence of two adjacent binding sites. Isothermal titration calorimetry (ITC) experiments show that the selectivity of L d for smaller ions is thermodynamically driven and provide evidence of positive cooperativity among the two binding sites of L d . The simplicity of the separation procedure reported here, requiring only 1 min of sonication in methanol, shows the potential applicability of this approach to real-world separations. Here, by achieving efficient rare-earth separations in small, synthetically facile helicates, this work shows the promise of self-assembly as a mechanism to drive metal separations.

Alcohols↗

DOE OSTI2022

Solvent-driven fractional crystallization for atom-efficient separation of metal salts from permanent magnet leachates

Abstract This work reports a dimethyl ether-driven fractional crystallization process for separating rare earth elements and transition metals. The process has been successfully applied in the treatment of rare earth element-bearing permanent magnet leachates as an atom-efficient, reagent-free separation method. Using ~5 bar pressure, the solvent was dissolved into the aqueous system to displace the contained metal salts as solid precipitates. Treatments at distinct temperatures ranging from 20–31 °C enable crystallization of either lanthanide-rich or transition metal-rich products, with single-stage solute recovery of up to 95.9% and a separation factor as high as 704. Separation factors increase with solution purity, suggesting feasibility for eco-friendly solution treatments in series and parallel to purify aqueous material streams. Staged treatments are demonstrated as capable of further improving the separation factor and purity of crystallized products. Upon completion of a crystallization, the solvent can be recovered with high efficiency at ambient pressure. This separation process involves low energy and reagent requirements and does not contribute to waste generation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Europium and samarium separation using ion exchange between molten salts and beta“-alumina

Here, a new approach to separating europium and samarium using ion exchange reactions between molten salts and a solid electrolyte, beta"-alumina, has been demonstrated. Separations were achieved by both ion exchange of europium and samarium into and out of beta"-alumina. A small separation factor of 1.07 was achieved from the ion exchange of europium into beta"-alumina. A much larger separation was achieved from ion exchange of europium out of beta"-alumina, with noticeable dependencies on the molten salt and experimental parameters (temperature, atmosphere, etc.) used. The highest separation factor achieved was greater than 30. However, the europium extraction efficiency was low. The highest europium extraction efficiency achieved was 51.8% ± 2.6 with a separation factor of 4.70 ± 0.46. The selective ion exchange of europium out of the beta"-alumina material is achieved based upon the higher conductivity of Eu 2+ compared to Ln 3+ (Ln = Eu, Sm) species also present in the beta"-alumina.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Separation of Hydrogen Using Pd/Ag Membranes: Experimental and Modeling Results with Potential Application to Direct Internal Recycle

Implementation of fusion energy requires processing the deuterium-tritium (D-T) mixture used to fuel the reaction, and separation of hydrogen isotopes from other gases is imperative. Specifically, the separation of hydrogen isotopes from helium is a matter of importance to the fusion fuel cycle community. Initial testing with a palladium-silver (Pd-Ag) membrane indicates that even moderate vacuum (~100 torr permeate pressure) can provide a high degree of separation (>90%) at a high ratio of H 2 to He. Given the presence of He in many fusion systems, a high technology readiness level (TRL) for Q 2 /He (where Q represents any isotope of hydrogen) separations is needed. This study demonstrates the efficacy of H 2 removal from He via permeation and potential applications for direct internal recycle. Modeling will accompany the experimental campaign to generate a predictive capability and quantify the separation performance. Modeling from previous hydrogen permeation studies has demonstrated that the typical Sieverts’ law fails to predict the measured permeation rates at high hydrogen fluxes. Existing models are being refined to integrate the effects of surface phenomena into permeation predictions, which have been expanded to account for mixtures with large ranges of Q 2 concentrations. These data will improve the TRL of permeators as a separation technology for the fusion fuel cycle.

08 HYDROGEN↗

DOE OSTI2022

Experimental Results for Large Particle Separation from Non-Newtonian Slurries Using Tapered Bump Arrays

Lateral displacement arrays are useful for separating particles such as blood cells and sand from carrier fluids. These arrays consist of staggered posts, which allow smaller particles to follow streamlines and larger particles to flow around the posts and migrate to one side. This migration increases the particle concentration in one direction and depletes the particle concentration in the other direction allowing particle separation to occur. Experiments were conducted to separate large particles in non-Newtonian yield stress slurries using tapered bump arrays. The non-Newtonian slurry used was composed of a bentonite kaolin blend with the inclusion of larger diameter particles. These experiments were conducted to evaluate the performance of particle separation using a tapered array of staggered posts as configured in a bump array for non-Newtonian yield stress slurries, an application that has not been explored experimentally. A theory for large particle separation was developed for slurries that exhibit Bingham or Cross rheology. The results of these experiments are described. This information could be applied in industrial settings such as separation of particles from nuclear waste slurries including those to be processed at the Hanford site, where removing large particles from waste streams is important to processing.

slurry, solids removal, deterministic lateral disp↗

DOE OSTI2025

Electrolyte Compatible Separator Materials for Sodium-Ion Battery

Sodium-ion batteries (NIBs) have emerged as an alternative electrochemical energy storage to replace lithium-ion batteries (LIBs). Separator is one of the key components that dictates the cell performance of NIB. Significant progress has been made in electrolyte research, however for most cases glass fiber has been used as separator due to its remarkable electrolyte wettability despite its many disadvantages. In this study, we evaluated commercially available porous materials as separator material for NIB. Porous polyvinylidene fluoride (PVDF) membrane stands out as a universal separator which exhibits high compatibility with a wide range of electrolytes and electrodes and demonstrates high electrochemical stability evaluated in hard carbon/Na half cells and NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (NFM111)/hard carbon full cells. This research highlights the PVDF membrane as a viable separator for advancing NIB research, enabling the development of new electrolyte materials without the separator constraints of wetting limitations or excessive electrolyte consumption.

Wostoupal, Owen S. [Argonne National Laboratory (A↗

DOE OSTI2020

Experimental Investigation on Separation Behavior of Heavy-Oil Emulsion for Polymer Flooding on Alaska North Slope

The first-ever field pilot on Alaska North Slope (ANS) to validate using polymer floods for heavy-oil enhanced oil recovery is currently ongoing. One of the major concerns of the operator is the effect of polymer on oil/water-separation efficiency after polymer breakthrough. This work investigates the influence of polymer on the separation behavior of heavy-oil emulsions and evaluates the performance of emulsion breakers (EBs). In this study, two types of heavy-oil emulsions were prepared and tested at 20 and 50% water cut (WC), respectively. The bottle test method was used in the experiments, in which the separated water volume with time, the separated water quality, and the volume fraction of phases were recorded. Results showed that polymer accelerated the oil/water separation acting as an emulsion inhibitor at 20% WC but tended to impede the water separation at 50% WC. Regardless of WC, polymer resulted in poor water quality and the formation of a stable intermediate oil in water (o/w) emulsion, because of the increased viscosity of the water phase. The performance of EBs showed a complex dependency on the WC, the type of demulsifier and dosage, and the polymer concentration. Despite the varied conditions encountered in the heavy-oil/water/polymer/demulsifier system, a compound EB achieved satisfactory demulsification performance, showing the highest potential for deployment in the current ANS polymer flooding pilot. Here, we systematically studied the potential influence of polymer breakthrough on the separation behavior of heavy-oil emulsion on ANS for the first time. The findings of this study will provide practical guidance in advance for produced fluid treatment of the ongoing first-ever polymer flooding pilot on ANS.

54 ENVIRONMENTAL SCIENCES↗