SEARCH · Search NASA

Results for “simulation types and techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1975

The landing flare: An analysis and flight-test investigation

Results are given of an extensive investigation of conventional landing flares in general aviation type airplanes. A wide range of parameters influencing flare behavior are simulated in experimental landings in a variable-stability Navion. The most important feature of the flare is found to be the airplane's deceleration in the flare. Various effects on this are correlated in terms of the average flare load factor. Piloting technique is extensively discussed. Design criteria are presented.

Seckel, E.↗

NASA NTRS1981

Algorithms for onboard orbit estimation with Tracking and Data Relay Satellite System data

An investigation is carried out to determine an appropriate estimation technique for onboard orbit determination using simulated Tracking and Data Relay Satellite System (TDRSS) data. Results are presented from studies done using three estimation techniques: an extended Kalman filter, a consider filter, and a sliding batch differential corrector. These estimators are evaluated when used with both baseline and worst-case TDRSS measurement errors and with tracking configurations for two types of orbits: a high-inclination, near-circular orbit with an altitude of 700 km and a moderately inclined, lower altitude orbit. Each estimation result is evaluated by comparing the true with the estimated ephemeris.

Dunham, J. B.↗

NASA NTRS1981

Laboratory Research

To properly interpret the rapidly growing body of data from comet observations, many types of laboratory measurements are needed. These include: (1) molecular spectroscopy in the visible, ultraviolet, infrared and microwave region of the spectra; (2) laser fluorescent spectroscopy of photofragments; (3) laboratory cross-section or reaction rate measurements using flow tube techniques, fluorescent spectroscopy detection for neutrals and ion-molecule reaction techniques; (4) experiments to simulate solar-wind interactions with comets; (5) studies of the properties and behavior of ice mixtures; (6) experiments on the sublimation rate of ice, and the phase transition from amorphous to crystalline ice; (7) investigations of the irradiation of ice; and (8) the electron impact dissociation and excitation of molecules of cometary interest. A nearly completed experiment on the proton irradiation of ice is described.

Donn, B.↗

NASA NTRS1981

Adjacent channel interference degradation with minimum shift keyed modulation

Computer simulation results for degradation in signal-to-noise ratio for various values of bit error probability are given for minimum shift-keyed-type signaling in the presence of adjacent channel interference. A serial modulator structure which utilizes spectral shaping is characterized in terms of envelope deviation and bandwidth efficiency. This serial generation technique is convenient for implementation at high data rates and results in signal spectra with lower sidelobe levels than conventional minimum shift-keyed modulation at the expense of moderate envelope deviation. Because of the lower sidelobe levels, the resulting spectra allow denser channel packing than does ideal MSK.

Ziemer, R. E.↗

NASA NTRS1990

Probabilistic simulation for flaw acceptance by dye-penetrant inspection

This paper examines the problems encountered in assessing the reliability of dye-penetrant nondestructive inspection (NDI) techniques in preventing failures due to undetected surface flaws, as well as from flaw acceptance (Fitness-For-Purpose). A Monte Carlo simulation procedure which includes the major variables of the problem is presented as a means of quantifying reliability. Some issues associated with distribution selection are examined. A methodology for selecting the penetrant type and flaw acceptance size for the specific components analyzed using the simulation is proposed. Current methodology limitations are discussed along with possible future effort. Penetrant selection and acceptable sizes of detected flaws are based on a probabilistic assessment of the effect of component and dye-penetrant system variables on structural reliability.

Russell, D. A.↗

NASA NTRS2010

Advanced Navigation Strategies For Asteroid Sample Return Missions

Flyby and rendezvous missions to asteroids have been accomplished using navigation techniques derived from experience gained in planetary exploration. This paper presents analysis of advanced navigation techniques required to meet unique challenges for precision navigation to acquire a sample from an asteroid and return it to Earth. These techniques rely on tracking data types such as spacecraft-based laser ranging and optical landmark tracking in addition to the traditional Earth-based Deep Space Network radio metric tracking. A systematic study of navigation strategy, including the navigation event timeline and reduction in spacecraft-asteroid relative errors, has been performed using simulation and covariance analysis on a representative mission.

Getzandanner, K.↗

DOE OSTI2020

Applying Multi-Frequency AC LOCO for Finding Sextupole Errors

A fast and precise technique of multi-frequency AC LOCO has been developed and tested for finding the sextupole alignment and field-offset errors at NSLS-II. This technique is based on sine-wave beam excitation simultaneously at multiple frequencies via different fast correctors. The unique combination of the fast speed and high measurement accuracy opens the door for two different types of potential applications: finding the sextupole alignment and field-offset errors. Beam excitation via fast correctors results in the elimination of the systematic error caused by the hysteresis effect. Systematic errors of the sextupole alignment caused by orbit drift and power supply calibration are also eliminated because the measurement takes only two minutes and does not depend on the current-to-field conversion of sextupole magnets. Furthermore, the simulation studies indicate that multi-frequency AC LOCO together with an orbit bump bigger than 0.5 mm can be applied to measure the relative field offset of a sextupole magnet with a precision better than 10%. The measurement technique is described and the results of two proof-of-principle experiments carried out at NSLS-II are presented.

43 PARTICLE ACCELERATORS↗

NASA NTRS1995

Numerical simulation of heat and mass transport during space crystal growth with MEPHISTO

The MEPHISTO space experiments are collaborative United States and French investigations aimed at understanding the fundamentals of crystal growth. Microgravity experiments were conducted aboard the USMP-1 and -2 missions on STS-52 and 62 in October 1992 and March 1994 respectively. MEPHISTO is a French designed and built Bridgman type furnace which uses the Seebeck technique to monitor the solid/liquid interface temperature and Peltier pulsing to mark the location and shape of the solid/liquid interface. In this paper the Bridgman growth of Sn-Bi and Bi-Sn under terrestrial and microgravity conditions is modeled using the finite element code, FIDAP*. The numerical model considers fully coupled heat and mass transport, fluid motion and solid/liquid phase changes in the crystal growth process. The primary goals of this work are: to provide a quantitative study of the thermal buoyancy-induced convection in the melt for the two flight experiments; to compare the vertical and horizontal growth configurations and systematically evaluate the effects of various gravity levels on the solute segregation. Numerical results of the vertical and horizontal Bridgman growth configurations are presented.

Yao, Minwu↗

DOE OSTI2025

Deep potential molecular dynamics simulations of ion-enhanced etching of silicon by atomic chlorine

The continued development of plasma-assisted processing techniques requires a fundamental understanding of plasma-surface interactions. Molecular dynamics (MD) simulations have been employed to complement experimental studies and better understand the properties of such systems. Recently, machine learning (ML) methods have enabled the development of ab initio-based interatomic potentials, which can be generalized to complex combinations of multiple atom types. In this work, we use ML potentials developed using the Deep Potential Molecular Dynamics (DeepMD) framework to provide a model of ion-enhanced etching of Si by Cl atoms. We demonstrate the importance of proper selection of the training data set to the accuracy of the DeepMD model and compare our results to MD results using empirical potentials, as well as to experimental measurements. Exposure of undoped Si at 300 K to thermal Cl atoms yields a steady-state Cl coverage of 1.25 monolayers, which is slightly lower than the value obtained in previous experimental studies. Predictions of Si etch yields by simultaneous Cl atom and Ar + ion impacts as a function of ion energy, neutral to ion flux ratio, and angle of incidence of the ions are in reasonably good agreement with classical MD results and experimental measurements. Finally, etch yields and SiCl x mixed layer thicknesses during simultaneous bombardment of the Si(100) surface by Cl atoms and Cl + ions are in good agreement with experimental data. In conclusion, the present work is a necessary condition for the extension of the DeepMD procedure to more complex systems of interest in plasma-surface interactions.

Artificial neural networks↗

NASA NTRS1975

Computer-generated animation for analysis and design

The development of computer-generated animation techniques was reviewed and some examples of the current state of the art were described. A number of ways in which computer-generated animation can be used were examined in relation to the suitability for the engineering task at hand. The examples described are primarily concerned with attempting to combine two different types of simulation: that of superposition of an engineering design on the surrounding real world, and an evaluation of this simulation both from an engineering design and an aesthetic point of view.

Feeser, L. J.↗

NASA NTRS1985

Research in the design of high-performance reconfigurable systems

Computer aided design and computer aided manufacturing have the potential for greatly reducing the cost and lead time in the development of VLSI components. This potential paves the way for the design and fabrication of a wide variety of economically feasible high level functional units. It was observed that current computer systems have only a limited capacity to absorb new VLSI component types other than memory, microprocessors, and a relatively small number of other parts. The first purpose is to explore a system design which is capable of effectively incorporating a considerable number of VLSI part types and will both increase the speed of computation and reduce the attendant programming effort. A second purpose is to explore design techniques for VLSI parts which when incorporated by such a system will result in speeds and costs which are optimal. The proposed work may lay the groundwork for future efforts in the extensive simulation and measurements of the system's cost effectiveness and lead to prototype development.

Mcewan, S. D.↗

NASA NTRS1992

Mixed-mode fracture in unidirectional graphite epoxy composite laminates with central notch

Mixed-mode matrix fracture in central notched off-axis unidirectional composite laminates was investigated. A limited number of unidirectional tensile type specimens with a central, horizontal, notch were tested. Crack initiation and propagation were examined under various local stress fields that were controlled by fiber orientations. The tested specimens were simulated using a two dimensional finite element method with constant strain loading. The strain energy release rates along the crack were evaluated via crack closure technique. The variation of critical strain energy rates with off-axis angle was studied. The results from single (one-sided) and double (two-sided) crack simulations were presented and compared.

Binienda, Wieslaw K.↗

NASA NTRS1993

The evaluation of several agility metrics for fighter aircraft using optimal trajectory analysis

Several functional agility metrics, including the combat cycle time metric, dynamic speed turn plots, and relative energy state metric, are used to compare turning performance for generic F-18, X-29, and X-31-type aircraft models. These three-degree-of-freedom models have characteristics similar to the real aircraft. The performance comparisons are made using data from optimal test trajectories to reduce sensitivities to different pilot input techniques and to reduce the effects of control system limiters. The turn performance for all three aircraft is calculated for simulated minimum time 180 deg heading captures from simulation data. Comparisons of the three aircraft give more insight into turn performance than would be available from traditional measures of performance. Using the optimal test technique yields significant performance improvements as measured by the metrics. These performance improvements were found without significant increases in turn radius.

Ryan, George W., III↗

NASA NTRS1997

Fuzzy Logic Decoupled Lateral Control for General Aviation Airplanes

It has been hypothesized that a human pilot uses the same set of generic skills to control a wide variety of aircraft. If this is true, then it should be possible to construct an electronic controller which embodies this generic skill set such that it can successfully control different airplanes without being matched to a specific airplane. In an attempt to create such a system, a fuzzy logic controller was devised to control aileron or roll spoiler position. This controller was used to control bank angle for both a piston powered single engine aileron equipped airplane simulation and a business jet simulation which used spoilers for primary roll control. Overspeed, stall and overbank protection were incorporated in the form of expert systems supervisors and weighted fuzzy rules. It was found that by using the artificial intelligence techniques of fuzzy logic and expert systems, a generic lateral controller could be successfully used on two general aviation aircraft types that have very different characteristics. These controllers worked for both airplanes over their entire flight envelopes. The controllers for both airplanes were identical except for airplane specific limits (maximum allowable airspeed, throttle ]ever travel, etc.). This research validated the fact that the same fuzzy logic based controller can control two very different general aviation airplanes. It also developed the basic controller architecture and specific control parameters required for such a general controller.

Duerksen, Noel↗

NASA NTRSDate not supplied

Vision-Based Distributed Sensing at Vertiports for Advanced Air Mobility and Urban Air Mobility Approach and Landing

Advanced Air Mobility (AAM) encompasses a broad vision for air transportation, including Urban Air Mobility (UAM) as a subset. AAM aims to create a more connected and efficient transportation network across various geographical settings. However, navigating AAM aircraft in GPS-denied or degraded environments during approach and landing is challenging. Traditional vision aids like glideslopes and localizers are limited in vertiport environments due to narrow beam constraints and reduced landing angle options. This paper addresses the need for accurate navigation solutions at vertiports by proposing a vision-based distributed sensing (VIDIS) system utilizing cameras with bundle adjustment to assist incoming AAM aircraft during approach and landing while monitoring surface movements to enhance safety and efficiency. Key focus areas for current and future vertiport developers include identifying suitable sensor types and infrastructure standards to support AAM operations and including vertiport markings as vision-based navigation aids. The proposed system offers a novel approach to overcoming navigation challenges in AAM operations, particularly in urban settings where traditional aids may be insufficient. Preliminary simulation results with distributed cameras demonstrate promising outcomes for implementing bundle adjustment techniques to enhance vision-based navigation solutions at vertiports. Generating waypoint-based trajectories via waypoint integration using explicit guidance synthesis (WINGS) creates smooth AAM trajectories for landing at vertiports by using the current waypoint's terminal conditions as the initial conditions for the next waypoint. Combining bundle adjustment's ground-based solution of vertiport features with WINGS, Coplanar Pose from Orthography and Scaling with Iterations (COPOSIT), and an extended Kalman filter (EKF) estimates the state of an incoming aircraft during approach and landing at vertiports. Future work includes testing VIDIS in a high-fidelity simulation and with real-world data.

Distributed sensing↗

NASA NTRSDate not supplied

Vision-Based Distributed Sensing at Vertiports for Advanced Air Mobility and Urban Air Mobility Approach and Landing

Distributed sensing↗

NASA NTRS2012

Design and Fabrication of DebriSat - A Representative LEO Satellite for Improvements to Standard Satellite Breakup Models

This paper discusses the design and fabrication of DebriSat, a 50 kg satellite developed to be representative of a modern low Earth orbit satellite in terms of its components, materials used, and fabrication procedures. DebriSat will be the target of a future hypervelocity impact experiment to determine the physical characteristics of debris generated after an on-orbit collision of a modern LEO satellite. The major ground-based satellite impact experiment used by DoD and NASA in their development of satellite breakup models was SOCIT, conducted in 1992. The target used for that experiment was a Navy transit satellite (~40 cm, 35 kg) fabricated in the 1960's. Modern satellites are very different in materials and construction techniques than those built 40 years ago. Therefore, there is a need to conduct a similar experiment using a modern target satellite to improve the fidelity of the satellite breakup models. To ensure that DebriSat is truly representative of typical LEO missions, a comprehensive study of historical LEO satellite designs and missions within the past 15 years for satellites ranging from 1 kg to 5000 kg was conducted. This study identified modern trends in hardware, material, and construction practices utilized in recent LEO missions. Although DebriSat is an engineering model, specific attention is placed on the quality, type, and quantity of the materials used in its fabrication to ensure the integrity of the outcome. With the exception of software, all other aspects of the satellite s design, fabrication, and assembly integration and testing will be as rigorous as that of an actual flight vehicle. For example, to simulate survivability of launch loads, DebriSat will be subjected to a vibration test. As well, the satellite will undergo thermal vacuum tests to verify that the components and overall systems meet typical environmental standards. Proper assembly and integration techniques will involve comprehensive joint analysis, including the precise torqueing of fasteners and thread locking. Finally, the implementation of process documentation and verification procedures is discussed to provide a comprehensive overview of the design and fabrication of this representative LEO satellite.

Clark, S.↗

NASA NTRS1987

Program risk analysis handbook

NASA regulations specify that formal risk analysis be performed on a program at each of several milestones. Program risk analysis is discussed as a systems analysis approach, an iterative process (identification, assessment, management), and a collection of techniques. These techniques, which range from extremely simple to complex network-based simulation, are described in this handbook in order to provide both analyst and manager with a guide for selection of the most appropriate technique. All program risk assessment techniques are shown to be based on elicitation and encoding of subjective probability estimates from the various area experts on a program. Techniques to encode the five most common distribution types are given. Then, a total of twelve distinct approaches to risk assessment are given. Steps involved, good and bad points, time involved, and degree of computer support needed are listed. Why risk analysis should be used by all NASA program managers is discussed. Tools available at NASA-MSFC are identified, along with commercially available software. Bibliography (150 entries) and a program risk analysis check-list are provided.

Batson, R. G.↗