Search NASA⌕ Search

SEARCH · Search NASA

Results for “streaming potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

A two-layer diagnostic model of the long-term physical evolution of warm-core ring 82B

The present shipboard data in the 1982 time series on a single Gulf Stream warm core ring are composited on a cylindrical coordinate system following ring motion; 10 C-isotherm depth measurements are used in a two-layer model of the ring's structure to compute gradient current, kinetic energy, available potential energy (APE), and potential vorticity. The ring's evolution can be divided into two periods: April-late June, while the ring is isolated from strong Gulf Stream interaction, during which the ring loses APE at a low rate, and from July onward, following ring interactions with the Gulf Stream and topography with much higher energy loss. Within measurement errors, the potential vorticity at the center of the ring is conserved from April through August, implying nearly inviscid dynamics.

Olson, D. B.↗
DOE OSTI2024

Mitigation of safety and environmental challenges posed by refrigerants

The abatement of safety and environmental burden associated with low and ultra-low Global Warming Potential (GWP) refrigerants is a critical undertaking. As the industry shifts towards more environmentally friendly alternatives, mitigating the potential risks and ensuring safety standards becomes paramount. The adoption of mildly and highly flammable refrigerants contributes significantly to minimizing the greenhouse gas impact on the environment, aligning with global climate and sustainability goals. However, it is essential to address safety concerns and potential environmental implications associated with the end use of these refrigerants. A method to mitigate the safety risk in a flammable refrigerant based heating, ventilation, air-conditioning, and refrigeration (HVACR) system is the primary focus of this paper. Advent of A2L and A3 refrigerants as replacements to high GWP refrigerants requires careful handling of leak episodes to lower or eliminate the risk associated with creating flammable mixtures capable of fire/explosion hazard. Solid materials tailored to target the molecule of interest (i.e., refrigerant.) by engineering the microporous structure as well as chemically functionalizing the surface to attract and hold on to the chemical compound being removed from the gas stream was realized. Quantitative analysis reveals the adsorbent's effectiveness in reducing leak potential in the range of 40 %–100 % for various refrigerants. Strategic placement and active leak management with negative pressure offer promising avenues for capturing leaked refrigerants, enhancing overall safety.

42 ENGINEERING↗
DOE OSTI2026

Field and Model Data Associated with the Manuscript “Drivers of Streamflow Intermittency in Humid Regions: 1. Evaluating Above- and Below-ground Controls of Flow Persistence in a Forested Catchment”

This package contains field data, modeling files, and scripts supporting the investigation of the drivers of streamflow intermittency in a forested catchment. It includes the field data collected from electrical resistivity tomography (ERT) surveys, ground penetrating radar (GPR), continuous self-potential (SP) monitoring, electromagnetic (EM) imaging, groundwater and stilling well. In addition, it contains the data and results of the coupled water- and electrical-flow model developed using the COMSOL Multiphysics and Advanced Terrestrial Simulator (ATS), as well as software files and Jupyter notebooks used to process the data and generate figures in the manuscript submitted for peer review. The data archive is organized in the following directories: 1) Climate Includes hourly precipitation and daily evapotranspiration time series (2024 – 2025) provided as CSV files, alongside a text file detailing dataset units. 2) Coupled_model Contains two subfolders: Synthetic and Field_Application subfolder. Synthetic subfolder contains the ATS XML input script (can be opened using any code editor) for the four synthetic hydrological cases tested (Connected and gaining, Connected and losing, Disconnected and losing, and dry stream). It also includes other experimental cases to test the influence of precipitation and concentration gradient. For each synthetic case, the flow model simulation is executed using the ATS XML scripts and the included Python script (generate_data_set.py) to convert ATS output to COMSOL-ready input. COMSOL Multiphysics template (.mph can be opened with the commercial software COMSOL and requires a license) is executed using the ATS output data to simulate the potential field. It also includes the Synthetic_model_plot.ipynb (can be opened using any code editor) to visualize the SP result and generate manuscript figures. The data subfolder contains mesh files to run both the ATS (.exo and .stl files can be viewed using Paraview; .h5 files can be opened using HDFView software and h5py Python package) and COMSOL models. Field_Application subfolder contains two subfolders: ES_MDA_inversion and Final_Model. ES_MDA_inversion contains the Python script (.py can be opened using any code editor) and SP observation data used to run the Ensemble Smoother with Multiple Data Assimilation (ES-MDA) inversion sequence to get the optimal model parameters. The Final_model subfolder contains the ATS XML input scripts, data files, output data for the two SP sites. The same workflow steps outlined for the Synthetic subfolder apply here. It also contains the Jupyter notebook (Plot_final_calib.ipynb) to visualize the results of the modeled SP, stream-groundwater exchange and moisture content. 3) Discharge Includes the electrical conductivity (EC) time series (provided as CSV files) from salt slug injections. It also includes the Jupyter notebook (Discharge_process.ipynyb) used to estimate discharge. All discharge measurements collated into rating_curve_processed.csv 4) EM Contains the CSV file of the EM data from the DUALEM-42, including spatial coordinates (x, y, z), apparent conductivity, and in-phase measurements at 2 m coil separations for horizontal coplanar (HCP) and perpendicular (PRP) geometries. 5) ERT Contains raw resistivity data (provided as CSV files), spatial location of each of the electrodes (provided as CSV files), and files used for the resistivity inversion (.resipy can be opened with the open-source ResIPy software). 6) GPR Includes GPR field datasets collected at 100 MHz and 250 MHz antenna frequencies, along with the processing/interpretation project file (GPR_process.gpz can be viewed using EKKO_Project 6, a commercial software by Sensors & Software that requires a license). 7) Slug_test Includes the slug test data at all the groundwater wells provided as CSV files, as well as the Jupyter notebook (Slug_test.ipynb) for calculating hydraulic conductivity. 8) SP Contains the SP data collected in field at the two SP sites (one in the perennial reach and the other in the intermittent reach), provided as DAT files. 9) Well_data Contains two subfolders: 1) Raw, which provides unprocessed pressure, electrical conductivity and temperature timeseries downloaded from the loggers in all the groundwater and stilling wells, and 2) Processed, which contains sorted, QA/QC timeseries data for each well. The data archive also contains data_process.ipynb, a Jupyter notebook used for field data analysis and generating figures (plotting well, SP, climate, and discharge data, as well as calculating head gradient at sites with nested groundwater wells). It also includes DTW.ipynb, a Jupyter notebook containing the code for the dynamic time warping (DTW) with sliding window to evaluate SP signal synchronicity.

ATS↗
DOE OSTI2022

Dehalogenation reactions between halide salts and phosphate compounds

Reactions between phosphoric acid [H 3 PO 4 ] or ammonium hydrogen phosphates [i.e., NH 4 H 2 PO 4 , (NH 4 ) 2 HPO 4 ] and halide salts can be used to dehalogenate (remove halides from) salt-based waste streams, where the process of removing halides yields products that have more efficient disposal pathways for repository storage. In this context, the term efficiency is defined as higher waste loadings and simplified immobilization processes with potential for recycle of certain salt components (e.g., 37 Cl as H 37 Cl or NH 4 37 Cl). The main streams identified for these processes are nuclear wastes generated during electrochemical reprocessing of used nuclear fuel as well as used halide salts from molten salt reactor operation. The potential byproducts of these reactions are fairly consistent across the range of halide species (i.e., F, Cl, Br, I) where the most common are hydrogen halides [e.g., HCl (g) ] or ammonium halides (e.g., NH 4 Cl). However, trihalide compounds (e.g., NCl 3 ), nitrogen triiodide ammine adducts [NI 3 ·(NH 3 ) x ], and ammonium triiodide (NH 4 I 3 ) are also possible. Several of these byproducts (i.e., NCl 3 , NBr 3 , NI 3 , and NH 4 I 3 ) are shock-sensitive contact explosives so their production in these processes must be tracked and carefully controlled, which includes methods of immediate neutralization upon production such as direct transport to a caustic scrubber for dissolution. Several benefits arise from utilizing H 3 PO 4 as the phosphate additive during dehalogenation reactions for making iron phosphate waste forms including more oxidized iron (higher Fe 3+ :Fe 2+ ratios), higher chemical durabilities, and the avoidance of trihalides, but the byproducts are hydrogen halides, which are corrosive and require special handling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

Leading-edge receptivity for blunt-nose bodies

This research program investigates boundary-layer receptivity in the leading-edge region for bodies with blunt leading edges. Receptivity theory provides the link between the unsteady distrubance environment in the free stream and the initial amplitudes of the instability waves in the boundary layer. This is a critical problem which must be addressed in order to develop more accurate prediction methods for boundary-layer transition. The first phase of this project examines the effects of leading-edge bluntness and aerodynamic loading for low Mach number flows. In the second phase of the project, the investigation is extended to supersonic Mach numbers. Singular perturbation techniques are utilized to develop an asymptotic theory for high Reynolds numbers. In the first year, the asymptotic theory was developed for leading-edge receptivity in low Mach number flows. The case of a parabolic nose is considered. Substantial progress was made on the Navier-Sotkes computations. Analytical solutions for the steady and unsteady potential flow fields were incorporated into the code, greatly expanding the types of free-stream disturbances that can be considered while also significantly reducing the the computational requirements. The time-stepping algorithm was modified so that the potential flow perturbations induced by the unsteady pressure field are directly introduced throughout the computational domain, avoiding an artificial 'numerical diffusion' of these from the outer boundary. In addition, the start-up process was modified by introducing the transient Stokes wave solution into the downstream boundary conditions.

Kerschen, Edward J.↗
DOE OSTI2023

Industrial Requirements Status Report and Down-Select of Candidate Technologies

The report discusses the potential for implementing Integrated Energy Systems (IES) using advanced nuclear reactors to provide thermal and electrical energy to carbon-emitting industries while reducing their carbon footprint. Nine different industries were reviewed to determine their decarbonization potential, how nuclear power can fit in, and the carbon footprint of each. The report also identifies specific integration points and streams for most processes, including temperature and pressure requirements of integrating nuclear power with industrial processes. The report also provides insights on advanced nuclear reactors and their potential for us in IES for decarbonization. The target audience for the report is broad, but mainly addressed to the industry leads and nuclear reactor developers. The report recommends that in the short term, a few processes should be identified to continue research and investigation so that front end engineering design work can provide technical analysis for integrating nuclear heat and replacing existing carbon-emitting thermal sources. The work emphasized the significant decarbonization opportunity across each of the technologies looked at as well as how novel and useful nuclear integration is to reduce the environmental impact of these significant industries.

02 PETROLEUM↗
NASA NTRS1968

Inhomogeneous two-stream instability.

Two oppositely charged particle beams interaction instability in cold plasma, discussing stabilization by periodic electrostatic potential

Knorr, G.↗
NASA NTRS1983

Multiple ion streams in the near vicinity of the Space Shuttle

Differential measurements of ion flow direction and energy during the third Space Shuttle mission have revealed the existence of ion streams in the near vicinity of the Orbiter at angles of attack as great as 50 deg with respect to the ram direction and typically with 10 percent of the ram current intensity. Neither the source nor the mechanism by which these secondary ion streams were created are known at present; however, it is reasonably certain that they are not of geophysical origin, but result from the interaction of the Orbiter with its environmental ionospheric plasma. The energy of the secondary streams was observed to be very close to the ion ram energy, and they were therefore not detected by a standard planar Retarding Potential Analyzer instrument. This leaves open the question as to their existence in the vicinity of orbiting spacecraft in general. Possible connections between secondary ion streams and phenomena previously observed in the vicinity of ionospheric spacecraft are mentioned.

Stone, N. H.↗
DOE OSTI2022

Mechanistic Simulations Suggest Riparian Restoration Can Partly Counteract Climate Impacts to Juvenile Salmon

Climate change is reducing summertime water availability and elevating water temperature, placing human consumptive needs in competition with needs of coldwater fishes. Here we worked with natural resource managers in the Snoqualmie River (Washington, USA) to develop riparian management scenarios, and used a process-based modeling system to examine how a threatened population of Chinook salmon (Oncorhynchus tschawytcha) may respond to climate change and whether riparian restoration could reduce climate effects. Linking models of global climate, regional hydrology and water temperature, and fish, we projected that streams would become warmer year-round and drier during summer, further stressing salmon. Climate change accelerated egg emergence, increased juvenile growth and survival, and accelerated outmigration of sub-yearling migrants. Growth was depressed for salmon remaining instream during summer (potential yearling migrants). Riparian restoration counteracted ~10% of summer increases in water temperature, and affected salmon similarly regardless of whether riparian buffers were partially or fully restored, whereas riparian degradation further warmed streams. Riparian restoration fully mitigated climate change effects on potential yearling migrant size, but only minimally affected sub-yearling migrants (assessment metrics changed <2%). Our results will be useful for watershed managers in aligning priorities for fish and humans and our framework can be applied elsewhere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Solubility controls on plutonium and americium release in subsurface environments exposed to acidic processing wastes

To identify the role of waste composition and sediment interactions in controlling Pu and Am mobility in contaminated sediments at Hanford, a legacy nuclear site, Pu and Am concentrations in solutions equilibrated with contaminated sediments from beneath the 216-Z-9 (Z-9) Trench were compared to the solubilities of PuO 2 materials, synthesized by methods representative of the disposed wastes, in the absence of sediments. Furthermore, this work shows that the solubilities of PuO 2 materials synthesized by different methods, and with varying particle sizes, agree with PuO 2 (am,hyd), although dissolution kinetics differed between materials. According to saturation index (SI) calculations, PuO 2 (am,hyd) is likely also controlling Pu release from sediments under conditions where phosphate concentrations are low. However, both Pu-phosphate and Am-phosphate phases, identified in SI calculations and by high resolution transmission electron microscopy, play roles in controlling release in low pH, high phosphate, shallow sediments just below the Z-9 Trench. The elevated phosphate is likely due to decomposition of tributyl phosphate from waste solutions over time. Sediments from deeper in the subsurface beneath the Z-9 Trench are less acidic and contain less phosphate, with Pu solubility likely controlled by PuO 2 (am,hyd) that precipitated following neutralization of the acidic waste stream. Controls on Am concentrations in deeper sediments are more complex and potentially involve sediment adsorption and/or release from Pu (1-x) Am x O 2 following Am in-growth. The concentrations of both Pu and Am were elevated in the colloidal fraction associated with shallow sediments, but not in PuO 2 experiments, suggesting the presence of Pu/Am pseudocolloids (e.g., Pu/Am associated with mineral colloids). However, Pu and Am association with the colloidal size fraction was not observed in deeper sediments, suggesting transport of Pu and Am to these depths beneath the Z-9 Trench was not due to colloidal transport.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Life Cycle Analysis of Electrofuels: Fischer–Tropsch Fuel Production from Hydrogen and Corn Ethanol Byproduct CO 2

Electrofuels from renewable H 2 and waste CO 2 streams are of increasing interest because of their CO 2 emissions reduction potentials compared to fossil counterparts. This study evaluated the well-to-wheel (WTW) greenhouse gas (GHG) emissions of Fischer-Tropsch (FT) fuels from various electrolytic H 2 pathways and CO 2 sources, using various process designs (i.e., with and without H 2 recycle) and system boundaries. Two systems with different boundaries were considered: a stand-alone plant (with CO 2 from any source) and an integrated plant with corn ethanol production (supplying CO 2 ). The FT fuel synthesis process was modeled using Aspen Plus, which showed that 45% of the carbon in CO 2 can be fixed in the FT fuel, with a fuel production energy efficiency of 58%. Using nuclear or solar/wind electricity, the stand-alone FT fuel production from various plant designs can reduce WTW GHG emissions by 90-108%, relative to petroleum fuels. When integrating the FT fuel production process with corn ethanol production, the WTW GHG emissions of FT fuels are 57-65% lower compared to petroleum counterparts. This study highlights the sensitivity of the carbon intensity of FT fuels to the system boundary selection (i.e., stand-alone vs integrated), which has different implications under various GHG emission credit frameworks.

08 HYDROGEN↗
DOE OSTI2021

Evaluate Synergies of Using Hydrothermal Liquification (HTL) and Anerobic Digestion (AD) Treatment Technologies for Wastewater Resource Recovery Facilities (WRRFs)

PNNL has developed Hydrothermal Liquefaction (HTL) technology, which can directly convert sewage sludge to a biocrude oil that can be refined into renewable diesel fuel and provide a significant reduction in the volume of biosolids produced as ash with far less potential environmental impacts associated with disposal. HTL also produces an aqueous byproduct stream that requires treatment before it can be returned to the headworks of the Wastewater Resource Recovery Facilities (WRRF). The goal of this project is to evaluate synergies of using HTL and advanced AD to enable the treatment and recycle of HTL aqueous phase. This CRADA will; 1) formalize and strengthen the working relationship between PNNL and GLWA, 2) jointly evaluate HTL and AD scenarios for WRRFs and 3) help enable the implementation of HTL/AD technology at GLWA and other WRRFs.

09 BIOMASS FUELS↗
DOE OSTI2024

Studies on the Vitrification Potential of High Risk Spent Nuclear Fuels

This research explored vitrification of U-Zr nuclear fuel that exhibits an explosion hazard when processed by common nitric acid dissolution. Glass frits were chosen based on properties that had been previously measured as well as being demonstrated successfully in production at the Defense Waste Process Facility (DWPF). Zirconium and Aluminum metal powders were chosen to represent the spent fuels after literature demonstrated that the potential phase that causes the issue for explosive reaction in the effluent stream is tied to the Zirconium-III phase field. DSC measurements were carried out on various simulants and waste forms to better understand thermal behavior of these materials. Zirconium (Zr) was tested with both nitric acid and the new effluent flowsheet that is under development by the SRNL Chemical Process Control (CPC) group. The nitric acid test did show the expected exothermic behavior as well as how the behavior is affected by particle size of the powders used. In contrast, the effluent samples did not show an exothermic peak. However, the concentration of metal in the samples was orders of magnitude lower than in the nitric acid testing and further testing of the effect of concentration on the exothermicity that could be measured confirmed a dampened signal. Tests were run that included frit, both DWPF Frit 510 and Iron Phosphate frit, exhibiting complex curves that included multiple endothermic and exothermic peaks during heating and cooling. The final crucible samples appear similarly to the bulk glasses pointing to these peaks being a part of the dissolution of the simulant into the base glasses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1972

Numerical calculation of transonic flow about swept wings.

Description of a mixed elliptic-hyperbolic relaxation algorithm which calculates solutions to the three-dimensional, nonlinear transonic small disturbance potential equation for flows about thin swept lifting wings with free-stream Mach number less than 1. The algorithm is designed to treat supercritical flows, including cases with embedded shock waves. Nonrectangular planform shapes, including sweep and taper, are treated by a coordinate transformation which maps the wing planform into a rectangle. Computed results at angles of attack of 0 and 2 deg for a AR = 4, constant chord, 23.75 deg sweptback planform model with a Lockheed C141 airfoil section are compared with data obtained experimentally for both subcritical and supercritical flows. Subcritical results are also compared with those obtained by a subsonic 'panel' method.

Ballhaus, W. F.↗
NASA NTRS1975

Coherent ion acceleration at a density gradient

The paper describes a model, in which ions are accelerated against the direction of the electric field at a density gradient. A one-dimensional, inhomogeneous, steady-state is constructed, in which cold electrons stream relative to cold ions. The wavenumber and amplitude of the fluctuating potential are calculated, then used to compute the trajectories of representative ions trapped in the potential troughs. Ion acceleration to energies an order of magnitude greater than the applied potential is demonstrated.

Hsieh, S. L.↗
NASA NTRS1976

An experimental study of the structure and acoustic field of a jet in a cross stream

The plane of symmetry of a high speed circular jet was surveyed to measure the mean and turbulent velocity fields by using constant temperature hot wire anemometry. The intensity of the noise radiated from the jet was determined in the tunnel test section by utilizing the cross-correlation at a particular time delay between the signals of two microphones suitably located along a given direction. Experimental results indicate that the turbulent intensity inside the crossflow jet increases by a factor of (1 + 1/2) as compared to the turbulent intensity of the same jet under free conditions, with r indicating the ratio of the jet velocity by the cross stream velocity. The peak observed in the turbulence spectra obtained inside the potential core of the jet has a frequency that increases by the same factor with respect to the corresponding frequency measured in the case of the free jet. The noise radiated by the jet becomes more intense as the crossflow velocity increases. The measured acoustic intensity of the crossflow jet is higher than the value which would be expected from the increase of the turbulent intensity only.

Camelier, I.↗
NASA NTRS1980

HCMM and LANDSAT imagery for geological mapping in northwest Queensland

The author has identified the following significant results. Photographic prints made from negatives of day-visible and day-IR cover of selected areas were compared with enhanced color composites generated from LANDSAT computer compatible tapes and films. For geological mapping purposes, HCMM imagery is of limited value. While large scale features like the Mikadoodi anticlinorium, contrasting lithological units, and major structures may be distinguished on day-visible and day-IR cover, the spectral bands are too broad and the resolution too coarse even for regional mapping purposes. The imagery appears to be most useful for drainage studies. Where drainage is seasonal, sequential imagery permits monitoring of broad scale water movement while the day-IR imagery yields valuable information on former channels. In plains areas subject to periodic change of stream courses, comparable IR cover at a larger scale would offer considerable potential for reconstruction of former drainage patterns essential for the correct interpretation of geochemical data relative to mineral exploration.

Cole, M. M.↗