Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Dosimetric comparison of patient setup strategies in stereotactic body radiation therapy for lung cancer

Purpose: In this work, the authors retrospectively compared the accumulated dose over the treatment course for stereotactic body radiation therapy (SBRT) of lung cancer for three patient setup strategies. Methods: Ten patients who underwent lung SBRT were selected for this study. At each fraction, patients were immobilized using a vacuum cushion and were CT scanned. Treatment plans were performed on the simulation CT. The planning target volume (PTV) was created by adding a 5-mm uniform margin to the internal target volume derived from the 4DCT. All plans were normalized such that 99% of the PTV received 60 Gy. The plan parameters were copied onto the daily CT images for dose recalculation under three setup scenarios: skin marker, bony structure, and soft tissue based alignments. The accumulated dose was calculated by summing the dose at each fraction along the trajectory of a voxel over the treatment course through deformable image registration of each CT with the planning CT. The accumulated doses were analyzed for the comparison of setup accuracy. Results: The tumor volume receiving 60 Gy was 91.7 {+-} 17.9%, 74.1 {+-} 39.1%, and 99.6 {+-} 1.3% for setup using skin marks, bony structures, and soft tissue, respectively. The isodose line covering 100% of the GTV was 55.5 {+-} 7.1, 42.1 {+-} 16.0, and 64.3 {+-} 7.1 Gy, respectively. The corresponding average biologically effective dose of the tumor was 237.3 {+-} 29.4, 207.4 {+-} 61.2, and 258.3 {+-} 17.7 Gy, respectively. The differences in lung biologically effective dose, mean dose, and V20 between the setup scenarios were insignificant. Conclusions: The authors' results suggest that skin marks and bony structure are insufficient for aligning patients in lung SBRT. Soft tissue based alignment is needed to match the prescribed dose delivered to the tumors.

60 APPLIED LIFE SCIENCES↗

Theoretical study of triaxial shapes of neutron-rich Mo and Ru nuclei

Here, whether atomic nuclei can possess triaxial shapes at their ground states is still a subject of ongoing debate. According to theory, good prospects for low-spin triaxiality are in the neutron-rich Mo-Ru region. Recently, transition quadrupole moments in rotational bands of even-mass neutron-rich isotopes of molybdenum and ruthenium nuclei have been measured. The new data have provided a challenge for theoretical descriptions invoking stable triaxial deformations. The purpose of this study is to understand experimental data on rotational bands in the neutron-rich Mo-Ru region, we carried out theoretical analysis of moments of inertia, shapes, and transition quadrupole moments of neutron-rich even-even nuclei around 110 Ru using self-consistent mean-field and shell model techniques. Methods: To describe yrast structures in Mo and Ru isotopes, we use nuclear density functional theory (DFT) with the optimized energy density functional UNEDF0. We also apply triaxial projected shell model (TPSM) to describe yrast and positive-parity, near-yrast band structures. As a result, our self-consistent DFT calculations predict triaxial ground-state deformations in 106,108 Mo and 108,110,112 Ru and reproduce the observed low-frequency behavior of moments of inertia. As the rotational frequency increases, a negative-gamma structure, associated with the aligned ν(h 11/2 ) 2 pair, becomes energetically favored. The computed transition quadrupole moments vary with angular momentum, which reflects deformation changes with rotation; those variations are consistent with experiment. The TPSM calculations explain the observed band structures assuming stable triaxial shapes. Lastly, the structure of neutron-rich even-even nuclei around Ru-110 is consistent with triaxial shape deformations. Our DFT and TPSM frameworks provide a consistent and complementary description of experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The structure of bow shocks formed by the interaction of pulsed-power driven magnetised plasma flows with conducting obstacles

We present an experimental study of the development and structure of bow shocks produced by the interaction of a magnetised, collisional, super-Alfvénic plasma flow with conducting cylindrical obstacles. The plasma flow with an embedded, frozen-in magnetic field (Re M ~ 20) is produced by the current-driven ablation of fine aluminium wires in an inverse, exploding wire array z-pinch. We show that the orientation of the embedded field with respect to the obstacles has a dramatic effect on the bow shock structure. When the field is aligned with the obstacle, a sharp bow shock is formed with a global structure that is determined simply by the fast magneto-sonic Mach number. When the field is orthogonal to the obstacle, magnetic draping occurs. This leads to the growth of a magnetic precursor and the subsequent development of a magnetised bow shock that is mediated by two-fluid effects, with an opening angle and a stand-off distance, that are both many times larger than in the parallel geometry. By changing the field orientation, we change the fluid regime and physical mechanisms that are responsible for the development of the bow shocks. MHD simulations show good agreement with the structure of well-developed bow shocks. However, collisionless, two-fluid effects will need to be included within models to accurately reproduce the development of the shock with an orthogonal B-field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Morphological, structural and optical characterization of SnO2 nanotube arrays fabricated using anodic alumina (AAO) template-assisted atomic layer deposition

Highlights: • SnO{sub 2} nanotubes were fabricated by AAO template-assisted atomic layer deposition. • Bulk and surface structure of the SnO{sub 2} nanotubes (NTs) were studied in detail. • The SnO{sub 2} nanotube arrays emitted green light centered at around 520 nm. • PL properties of the SnO{sub 2} NTs depended on their morphology and surface structure. - Abstract: Self-aligned and equal-space SnO{sub 2} nanotubes (NTs) with external diameters ranging from ca. 124 to ca. 325 nm and wall thickness of around 30 nm were synthesized by AAO template-assisted atomic layer deposition. The bulk and surface structure of the SnO{sub 2} nanostructures were studied in detail by XRD and XPS techniques, respectively. The SnO{sub 2} NTs were polycrystalline with an average crystallite size of ca. 3 nm. The structure analysis has revealed that the SnO{sub 2} NTs are composed of the rutile-type SnO{sub 2}. The SnO{sub 2} nanotube arrays with the smaller external diameters emitted green light centered at around 520 nm. The emission was ascribed to the radiative recombination between electrons trapped in shallow donor levels and holes at the intrinsic surface states, associated with the oxygen deficient sites near surface region. The PL intensity diminished with the nanotube diameter and spacing. With increasing external diameter of the SnO{sub 2} nanotubes and decreasing the distance between the neighboring nanotubes, the emission become progressively weaker. The results demonstrate that the structure, morphology and arrangement of SnO{sub 2} nanotubes play an important role in their luminescent properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Extended interaction length laser-driven acceleration in a tunable dielectric structure

The development of long, tunable structures is critical to increasing energy gain in laser-driven dielectric accelerators (DLAs). Here we combine pulse-front-tilt illumination with slab-geometry structures assembled by precisely aligning off-the-shelf 4 mm long transmission gratings to achieve up to 200 keV energy modulation for 6 MeV injected electrons. The effective interaction length is longer than 1 mm, limited by the dephasing of the accelerated particles in the structure. The piezo-based independent mounting system for the gratings allows tuning of the gap and field distribution inside the structure. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗

RF beam scattering by cylindrical filaments and interfacial density fluctuations

Radio Frequency (RF) waves are routinely used in tokamaks for heating, current drive, NTM control, as well as for diagnostics purposes. Frequently, RF waves, aiming towards the plasma core, propagate through a turbulent environment. The latter can exhibit strong coherent density fluctuations as well as filamentary structures mainly (though, not perfectly) aligned along the local magnetic field lines. The scattering process of RF waves by these structures is studied both analytically and numerically. RF waves can be either single plane waves or spatially confined beams. For that purpose, the filaments are considered to have cylindrical shape with infinite length with the cylinder axis not aligned with the local magnetic field and the results are compared to the ones from the study of the aligned case. On the other hand, the interfacial density fluctuations are considered periodic with spatial periods larger, smaller or of the same order of the wavelength of the incident RF waves. The frequency range of the RF waves studied is mainly in the Electron Cyclotron (EC) range of frequencies for ITER-like and Medium Size Tokamak applications. Furthermore, the study covers a variety of density contrasts, filament sizes and fluctuation strengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Helical magnetic ordering in Sr ( Co 1 - x Ni x ) 2 As 2

SrCo 2 As 2 is a peculiar itinerant magnetic system that does not order magnetically, but inelastic neutron-scattering experiments observe the same stripe-type antiferromagnetic (AF) fluctuations found in many of the Fe-based superconductors along with evidence of magnetic frustration. Here we present results from neutron diffraction measurements on single crystals of Sr(Co 1-x Ni x ) 2 As 2 that show the development of long-range AF order with Ni doping. However, the AF order is not stripe type. Rather, the magnetic structure consists of ferromagnetically aligned (FM) layers (with moments laying in the layer) that are AF arranged along c with an incommensurate propagation vector of (0 0 τ), i.e., a helix. Using high-energy x-ray diffraction, we find no evidence for a temperature-induced structural phase transition that would indicate a collinear AF order. This finding supports a picture of competing FM and AF interactions within the square transition-metal layers due to flat-band magnetic instabilities. However, the composition dependence of the propagation vector suggests that far more subtle Fermi surface and orbital effects control the interlayer magnetic correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DISCOVERY OF A LARGE-SCALE GALAXY FILAMENT NEAR A CANDIDATE INTERGALACTIC X-RAY ABSORPTION SYSTEM

We present an analysis of the large-scale galaxy distribution around two possible warm-hot intergalactic medium (WHIM) absorption systems reported along the Markarian 421 sight line. Using the Sloan Digital Sky Survey (SDSS), we find a prominent galaxy filament at the redshift of the z = 0.027 X-ray absorption line system. The filament exhibits a width of 3.2 Mpc and a length of at least 20 Mpc, comparable to the size of WHIM filaments seen in cosmological simulations. No individual galaxies fall within 350 projected kpc so it is unlikely that the absorption is associated with gas in a galaxy halo or outflow. Another, lower-significance X-ray absorption system was reported in the same Chandra spectrum at z = 0.011, but the large-scale structure in its vicinity is far weaker and may be a spurious alignment. By searching for similar galaxy structures in 140 random smoothed SDSS fields, we estimate an {approx}5%-10% probability of the z = 0.027 absorber-filament alignment occurring by chance. If these two systems are indeed physically associated, this would represent the first known coincidence between a large-scale galaxy structure and a blind X-ray WHIM detection.

79 ASTRONOMY AND ASTROPHYSICS↗

Solving the structure of Lgl2, a difficult blind test of unsupervised structure determination

In the companion paper by Ufimtsev and Levitt [Ufimtsev IS, Levitt M (2019) Proc Natl Acad Sci USA , 10.1073/pnas.1821512116], we presented a method for unsupervised solution of protein crystal structures and demonstrated its utility by solving several test cases of known structure in the 2.9- to 3.45-Å resolution range. Here we apply this method to solve the crystal structure of a 966-amino acid construct of human lethal giant larvae protein (Lgl2) that resisted years of structure determination efforts, at 3.2-Å resolution. The structure was determined starting with a molecular replacement (MR) model identified by unsupervised refinement of a pool of 50 candidate MR models. This initial model had 2.8-Å RMSD from the solution. The solved structure was validated by comparison with a model subsequently derived from an alternative crystal form diffracting to higher resolution. This model could phase an anomalous difference Fourier map from an Hg derivative, and a single-wavelength anomalous dispersion phased density map made from these sites aligned with the refined structure.

59 BASIC BIOLOGICAL SCIENCES↗

Optical and gas-sensing properties, and electronic structure of the mixed-phase CaCu{sub 3}Ti{sub 4}O{sub 12}/CaTiO{sub 3} composites

Highlights: • CCTO/CTO composites were synthesized by a solid-state reaction using various milling durations. • These composites have a broad PL emission band located at 450 nm. • CCTO/CTO material was deposited onto an alumina substrate using a screen-printing technique, and hence, could be structured for gas-sensing applications. • Our theoretical findings may further elucidate the electronic structure associated with the interfacial band alignment (type I-straddling gap). - Abstract: Combined experimental and theoretical investigations were conducted on the electronic structure, as well as the optical and gas-sensing properties of mixed-phase CaCu{sub 3}Ti{sub 4}O{sub 12}/CaTiO{sub 3} (CCTO/CTO) composites, which were synthesized by a solid-state reaction using various milling durations. Our results revealed that these CCTO/CTO composites have a broad photoluminescence (PL) emission band located at 450 nm, which is strongly influenced by the milling process duration. Scanning electron microscopy images confirmed that the use of longer milling durations favored the formation of pores and increased the active surface area of the CCTO/CTO thick films. The thick films were prepared using the screen-printing technique, and hence, could be structured for gas-sensing applications. Our theoretical findings may further elucidate the electronic structure associated with the interfacial band alignment (type I-straddling gap) of the CCTO/CTO composite systems.

36 MATERIALS SCIENCE↗

Defect-free-induced Na + disordering in electrode materials

For reaching high-performance of electrode materials, it is generally believed that understanding the structure evolution and heterogeneous alignment effect is the key. Presently, a very simple and universally applicable self-healing method is investigated to prepare defect-free Prussian blue analogs (PBAs) that reach their theoretical capacity as cathode materials for sodium-ion batteries (SIBs). For direct imaging of the local structure and the dynamic process at the atomic scale, we deliver a fast ion-conductive nickel-based PBA that enables rapid Na + extraction/insertion within 3 minutes and a capacity retention of nearly 100% over 4000 cycles. This guest-ion disordered and quasi-zero-strain nonequilibrium solid–solution reaction mechanism provides an effective guarantee for realizing long-cycle life and high-rate capability electrode materials that operate via reversible two-phase transition reaction. Unconventional materials and mechanisms that enable reversible insertion/extraction of ions in low-cost metal–organic frameworks (MOFs) within minutes have implications for fast-charging devices, grid-scale energy storage applications, material discovery, and tailored modification.

36 MATERIALS SCIENCE↗

Ultrastrong Ionotronic Films Showing Electrochemical Osmotic Actuation

Abstract A multifunctional soft material with high ionic and electrical conductivity, combined with high mechanical properties and the ability to change shape can enable bioinspired responsive devices and systems. The incorporation of all these characteristics in a single material is very challenging, as the improvement of one property tends to reduce other properties. Here, a nanocomposite film based on charged, high‐aspect‐ratio 1D flexible nanocellulose fibrils, and 2D Ti 3 C 2 T x MXene is presented. The self‐assembly process results in a stratified structure with the nanoparticles aligned in‐plane, providing high ionotronic conductivity and mechanical strength, as well as large water uptake. In hydrogel form with 20 wt% liquid, the electrical conductivity is over 200 S cm −1 and the in‐plane tensile strength is close to 100 MPa. This multifunctional performance results from the uniquely layered composite structure at nano‐ and mesoscales. A new type of electrical soft actuator is assembled where voltage as low as ±1 V resulted in osmotic effects and giant reversible out‐of‐plane swelling, reaching 85% strain.

Chemistry↗

From amorphous to microcrystalline: Phase transition in rapid synthesis of hydrogenated silicon thin film in low frequency inductively coupled plasmas

Hydrogenated silicon (Si:H) thin films were fabricated on glass substrates by low frequency inductively coupled plasma-assisted chemical vapor deposition using a silane precursor with low hydrogen dilution at room temperature. The crystallinity and microstructure properties of the Si:H thin films deposited at different inductive radio-frequency (rf) power density were systematically studied by Raman spectroscopy, x-ray diffraction, and scanning electron microscopy. We found that at a low rf power density of 16.7 to 20.8 mW/cm{sup 3}, the structure of silicon thin films evolves from a completely amorphous phase to an intermediate phase containing both amorphous and microcrystalline silicon. As the power density is increased to a moderate value of 25 mW/cm{sup 3}, a highly crystallized (111)-preferred hydrogenated microcrystalline silicon ({mu}c-Si:H) film featuring a vertically aligned cone-shaped structure, is emerging. Both the crystallinity and deposition rate exhibit a monotonic increase with the increase in the rf power density, reaching a maximum value of 85% and 1.07 nm/s, respectively, at a power density of 41.7 mW/cm{sup 3}. Scanning electron microscopy reveals that continuous and dense {mu}c-Si:H films with grain size of tens to hundreds nanometers can be achieved deterministically without the formation of amorphous incubation layer, and this is of great importance for synthesis of multilayer structures in p-i-n solar cells. The formation mechanism of the {mu}c-Si:H films and the elimination of the amorphous incubation layer are explained in terms of the high electron density and the plasma-surface interactions.

36 MATERIALS SCIENCE↗

The X-Ray Crystal Structure of the Keratin 1-Keratin 10 Helix 2B Heterodimer Reveals Molecular Surface Properties and Biochemical Insights into Human Skin Disease

Keratins 1 (K1) and 10 (K10) are the primary keratins expressed in differentiated epidermis. Mutations in K1/K10 are associated with human skin diseases. We determined the crystal structure of the complex between the distal (2B) helices of K1 and K10 to better understand how human keratin structure correlates with function. The 3.3 Å resolution structure confirms many features inferred by previous biochemical analyses, but adds unexpected insights. It demonstrates a parallel, coiled-coil heterodimer with a predominantly hydrophobic intermolecular interface; this heterodimer formed a higher order complex with a second K1-K10-2B heterodimer via a Cys401K10 disulfide link, although the bond angle is unanticipated. The molecular surface analysis of K1-K10-2B identified several pockets, one adjacent to the disulfide linkage and conserved in K5-K14. The solvent accessible surface area of the K1-K10 structure is 20–25% hydrophobic. The 2B region contains mixed acidic and basic patches proximally (N-terminal), whereas it is largely acidic distally (C-terminal). Mapping of conserved and nonconserved residues between K1-K10 and K5-K14 onto the structure demonstrated the majority of unique residues align along the outer helical ridge. Finally, the structure permitted a fresh analysis of the deleterious effects caused by K1/K10 missense mutations found in patients with phenotypic skin disease.

59 BASIC BIOLOGICAL SCIENCES↗

The dense filamentary giant molecular cloud G23.0–0.4: Birthplace of ongoing massive star formation

We present observations of 1.5 square degree maps of the {sup 12}CO, {sup 13}CO, and C{sup 18}O (J = 1 − 0) emission toward the complex region of the supernova remnant (SNR) W41 and SNR G22.7–0.2. A massive (∼5×10{sup 5} M{sub ⊙}), large (∼84 × 15 pc), and dense (∼10{sup 3} cm{sup −3}) giant molecular cloud (GMC), G23.0–0.4 with V{sub LSR} ∼ 77 km s{sup −1}, is found to be adjacent to the two SNRs. The GMC displays a filamentary structure approximately along the Galactic plane. The filamentary structure of the dense molecular gas, traced by C{sup 18}O (J = 1 − 0) emission, is also coincident well with the distribution of the dust-continuum emission in the direction. Two dense massive MC clumps, two 6.7 GHz methanol masers, and one H ii/SNR complex, associated with the 77 km s{sup −1} GMC G23.0–0.4, are aligned along the filamentary structure, indicating the star-forming activity within the GMC. These sources have periodic projected spacing of 0.°18–0.°26 along the giant filament, which is consistent with the theoretical predictions of 0.°22. This indicates that the turbulence seems to dominate the fragmentation process of the dense gaseous filament on a large scale. The established 4.4 kpc distance of the GMC and the long dense filament traced by C{sup 18}O emission, together with the rich massive star-formation groups in the nearby region, suggest that G23.0–0.4 is probably located at the near side of the Scutum–Centaurus arm in the first quadrant. Considering the large scale and the elongation structure along the Galactic plane, we speculate that the dense filamentary GMC is related to the spiral density wave of the Milky Way.

79 ASTRONOMY AND ASTROPHYSICS↗

Energy level alignment at molecule-metal interfaces from an optimally tuned range-separated hybrid functional

The alignment of the frontier orbital energies of an adsorbed molecule with the substrate Fermi level at metal-organic interfaces is a fundamental observable of significant practical importance in nanoscience and beyond. Typical density functional theory calculations, especially those using local and semi-local functionals, often underestimate level alignment leading to inaccurate electronic structure and charge transport properties. Here, we develop a new fully self-consistent predictive scheme to accurately compute level alignment at certain classes of complex heterogeneous molecule-metal interfaces based on optimally tuned range-separated hybrid functionals. Starting from a highly accurate description of the gas-phase electronic structure, our method by construction captures important nonlocal surface polarization effects via tuning of the long-range screened exchange in a range-separated hybrid in a non-empirical and system-specific manner. We implement this functional in a plane-wave code and apply it to several physisorbed and chemisorbed molecule-metal interface systems. Our results are in quantitative agreement with experiments, the both the level alignment and work function changes. This approach constitutes a new practical scheme for accurate and efficient calculations of the electronic structure of molecule-metal interfaces.

36 MATERIALS SCIENCE↗

Method for alignment of microwires

A method of aligning microwires includes modifying the microwires so they are more responsive to a magnetic field. The method also includes using a magnetic field so as to magnetically align the microwires. The method can further include capturing the microwires in a solid support structure that retains the longitudinal alignment of the microwires when the magnetic field is not applied to the microwires.

36 MATERIALS SCIENCE↗

Impaired Protofibril Formation in Fibrinogen γN308K Is Due to Altered D:D and "A:a" Interactions

'A:a' knob-hole interactions and D:D interfacial interactions are important for fibrin polymerization. Previous studies with recombinant ?N308K fibrinogen, a substitution at the D:D interface, showed impaired polymerization. We examined the molecular basis for this loss of function by solving the crystal structure of ?N308K fragment D. In contrast to previous fragment D crystals, the ?N308K crystals belonged to a tetragonal space group with an unusually long unit cell (a = b = 95 Angstroms, c = 448.3 Angstroms). Alignment of the normal and ?N308K structures showed the global structure of the variant was not changed and the knob 'A' peptide GPRP was bound as usual to hole 'a'. The substitution introduced an elongated positively charged patch in the D:D region. The structure showed novel, symmetric D:D crystal contacts between ?N308K molecules, indicating the normal asymmetric D:D interface in fibrin would be unstable in this variant. We examined GPRP binding to ?N308K in solution by plasmin protection assay. The results showed weaker peptide binding, suggesting that 'A:a' interactions were altered. We examined fibrin network structures by scanning electron microscopy and found the variant fibers were thicker and more heterogeneous than normal fibers. Considered together, our structural and biochemical studies indicate both 'A:a' and D:D interactions are weaker. We conclude that stable protofibrils cannot assemble from ?N308K monomers, leading to impaired polymerization.

36 MATERIALS SCIENCE↗