Search NASA⌕ Search

SEARCH · Search NASA

Results for “submicron”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Trajectories of charged dust grains in the cometary environment

Using a simple model of the particles and fields environment of a comet, the trajectories of the smallest (micron- and submicron-sized) dust grains that are expected to be released from a cometary nucleus are calculated. It is shown that electromagnetic forces play a crucial role in the dynamics of these particles. The present calculations indicate not only the asymmetry of the sunward dust envelopes that have been suggested earlier by other authors, but they also indicate the possible existence of wavy dust features far down the tail, reminiscent of the peculiar wavy dust feature observed in the dust tail of Comet Ikeya-Seki 1965f. The importance of these findings in studying the lower end of the cometary dust mass spectrum during the forthcoming fly-by missions to Comet Halley is underscored.

Horanyi, M.↗

Overview of solid particle LV seeding techniques used at UTRC

Due to the failure of existing seeders to meet the stringent specifications required for benchmark experiments in high pressure, high temperature, rapidly accelerating flowfields, an effort is made to improve an existing solid particle seeder. The goal is to produce a more monodisperse seed from the 0.3 micro alumina powder with more than 99 percent of the particles in the submicron range while maintaining a high seeding rate. Coiled-wire inserts are installed within the ends of the nitrogen injection lines in the primary seeder to produce swirling conical jets to vigorously agitate the seed bed. A secondary swirler, constructed from a 25 cm length of 3.8 cm ID steel pipe having threaded end caps, is connected to the output line of the primary seeder. The seeded nitrogen from the primary seeder is injected tangentially at near sonic velocity into the secondary swirler 9.4 cm above its base. Independently controlled auxiliary nitrogen used to increase the swirl in the secondary chamber is also injected tangentially 2.5 cm below the seeded nitrogen lines. Large seed particles are collected by bleeds in the swirler cap and directed overboard. The remaining seeded nitrogen is collected on the center line of the secondary swirler and ducted to the rig.

Patrick, W. P.↗

Preliminary results of the Vega 1 and Vega 2 optical investigation of aerosol in the atmosphere of Venus at 30-60 KM

Aerosol concentration profiles were measured by an aerosol spectrometer above the landing sites of the Vega 1 and Vega 2 landers. Approximately the same altitude zones were found as in previous experiments: a three-layered basic cloud cover, an intermediate zone and subcloud haze. There were significant quantitative differences in the concentrations of particles, however, and especially in the spectra of their dimensions. Nightglow was found in the troposphere of Venus at a wavelength of about 1 micron. The backscatter coefficient and the extinction coefficient change very little between 32 and 63 km. Large numbers of submicron particles apparently exist in the atmosphere above the landing sites.

Moshkin, B. Y.↗

Mass loading of the Earth's magnetosphere by micron size lunar ejecta. 1: Ejecta production and orbital dynamics in cislunar space

Particulate matter possessing lunar escape velocity sufficient to enhance the cislunar meteroid flux was investigated. While the interplanetary flux was extensively studied, lunar ejecta created by the impact of this material on the lunar surface is only now being studied. Two recently reported flux models are employed to calculate the total mass impacting the lunar surface due to sporadic meteor flux. There is ample evidence to support the contention that the sporadic interplanetary meteoroid flux enhances the meteroid flux of cislunar space through the creation of micron and submicron lunar ejecta with lunar escape velocity.

Alexander, W. M.↗

Synthesis of ceramic powders and surface films from laser heated gases

Two new processes have been developed that are based on laser-heated gases. Both permit unusually precise levels of process control and, thereby, materials having superior properties. The power process yields Si, Si3N4 and SiC powders that are uniform in size, nonagglomerated, small diameter, spherically shaped and high purity. Manufacturing cost analyses show that submicron powders can be made with an energy cost of approximately 2 kWhr/kg and a dollar cost of 2-3.30 $/kg, exclusive of the costs of feed materials. The laser-induced chemical vapor deposition process (LICVD) causes reactant gases to be heated by absorbing IR light from a laser beam that passes parallel to the substrate surface. Laser heating permits independent control of gas and substrate temperatures while operating in a conventional, thermally activated chemical vapor deposition mode. Spin density, hydrogen content, electrical conductivity and mobility gap properties show the LICVD process capable of producing very high quality films.

Haggerty, J. S.↗

Thermophoretically augmented mass transfer rates to solid walls across laminar boundary layers

Predictions of mass transfer (heavy vapor and small particle deposition) rates to solid walls, including the effects of thermal (Soret) diffusion ('thermophoresis' for small particles), are made by numerically solving the two-dimensional self-similar forced convection laminar boundary-layer equations with variable properties, covering the particle size range from vapor molecules up to the size threshold for inertial (dynamical nonequilibrium) effects. The effect of thermophoresis is predicted to be particularly important for submicron particle deposition on highly cooled solid surfaces, with corresponding enhancement factors at atmospheric conditions being over a thousand-fold at T(w)/T(e) equal to about 0.6. As a consequence of this mass transfer mechanism, the particle size dependence of the mass transfer coefficient to a cooled wall will be much weaker than for the corresponding case of isothermal capture by Brownian-convective diffusion.

Gokoglu, S. A.↗

Mineralogy of interplanetary dust particles from the 'olivine' infrared class

Analytical electron microscopy observations establish that olivine is abundant and the predominant silicate phase in three interplanetary dust particles (IDPs) from the 'olivine' infrared spectra category. Two of the particles have microstructures resembling those of most nonhydrous chondritic IDPs, consisting of micron to submicron grains together with a matrix composed of amorphous carbonaceous material and sub-500 A grains. In addition to olivine these particles respectively contain enstatite and magnetite, and pentlandite plus Ca-rich clinopyroxene. The third IDP consists mostly of olivine and pyrrhotite with little or no matrix material. Olivine grains in this particle contain prominent solar-flare ion tracks with densities corresponding to a space-exposure age between 1000 to 100,000 years. Although the three particles have olivine-rich mineralogies in common, other aspects of their mineralogies and microstructures suggest that they experienced different formation histories. The differences between the particles indicate that the olivine infrared spectral category is a diverse collection of IDPs that probably incorporates several genetic groups.

Christoffersen, R.↗

Design and optimization of NbCN/PbBi mixer elements for heterodyne receivers

Superconductor-Insulator-Superconductor (SIS) quantum mixers provide a relatively new approach to millimeter wave mixing potentially offering conversion gain, a low local oscillator power demand and potential mixer temperatures near the quantum limit. This paper presents device modeling and fabrication development for NbCN lead-alloy submicron edge-contact SIS mixers for use at 115 GHz.

Lichtenberger, A. W.↗

Saturn: A unique magnetosphere/ionosphere/ring interaction

Latitudinal variations in images of Saturn's disk, upper atmospheric temperatures, and ionospheric electron density anomalies found in magnetic conjugacy with features in Saturn's ring plane are discussed. It is suggested that latitudinal variations are the result of a variable influx of water, transported along magnetic field lines from sources in Saturn's ring plane. Two such sources with optical counterparts in the inner B ring can be readily attributed to an electromagnetic erosion process that transports water in the form of high charge to mass ratio particles (ions or submicron grains with 1 electron charge) along magnetic field lines from the ring plane to Saturn's atmosphere. Another is attributed to erosion of the icy satellite Enceladus and the associated E ring.

Converney, J. E. P.↗

Oxygen diffusion barrier coating

A method for coating a titanium panel or foil with aluminum and amorphous silicon to provide an oxygen barrier abrogating oxidation of the substrate metal is developed. The process is accomplished with known inexpensive procedures common in materials research laboratories, i.e., electron beam deposition and sputtering. The procedures are conductive to treating foil gage titanium and result in submicron layers which virtually add no weight to the titanium. There are no costly heating steps. The coatings blend with the substrate titanium until separate mechanical properties are subsumed by those of the substrate without cracking or spallation. This method appreciably increases the ability of titanium to mechanically perform in high thermal environments such as those witnessed on structures of space vehicles during re-entry

Unnam, Jalaiah↗

Computer control of a scanning electron microscope for digital image processing of thermal-wave images

Using a recently developed technology called thermal-wave microscopy, NASA Lewis Research Center has developed a computer controlled submicron thermal-wave microscope for the purpose of investigating III-V compound semiconductor devices and materials. This paper describes the system's design and configuration and discusses the hardware and software capabilities. Knowledge of the Concurrent 3200 series computers is needed for a complete understanding of the material presented. However, concepts and procedures are of general interest.

Gilbert, Percy↗

Determination of diffusion coefficients in polypyrrole thin films using a current pulse relaxation method

The current pulse E sub oc relaxation method and its application to the determination of diffusion coefficients in electrochemically synthesized polypyrrole thin films is described. Diffusion coefficients for such films in Et4NBF4 and MeCN are determined for a series of submicron film thicknesses. Measurement of the double-layer capacitance, C sub dl, and the resistance, R sub u, of polypyrrole thin films as a function of potential obtained with the galvanostatic pulse method is reported. Measurements of the electrolyte concentration in reduced polypyrrole films are also presented to aid in the interpretation of the data.

Penner, Reginald M.↗

Saturn - A unique magnetosphere/ionosphere/ring interaction

Latitudinal variations in images of Saturn's disc, upper atmospheric temperatures, and ionospheric electron density anomalies are found in magnetic conjugacy with - i.e., magnetically linked to - features in Saturn's ring plane. It is suggested that these latitudinal variations are the result of a variable influx of water, transported along magnetic field lines from sources in Saturn's ring plane. Two such sources with optical counterparts in the inner B ring can be readily attributed to an electromagnetic erosion process that transports water in the form of high charge to mass ratio particles (ions or submicron grains with 1 electron charge) along magnetic field lines from the ring plane to Saturn's atmosphere. Another is attributed to erosion of the icy satellite Enceladus and the associated E ring.

Connerney, J. E. P.↗

Prediction and rational correlation of thermophoretically reduced particle mass transfer to hot surfaces across laminar or turbulent forced-convection gas boundary layers

A formulation previously developed to predict and correlate the thermophoretically-augmented submicron particle mass transfer rate to cold surfaces is found to account for the thermophoretically reduced particle mass transfer rate to overheated surfaces such that thermophoresis brings about a 10-decade reduction below the convective mass transfer rate expected by pure Brownian diffusion and convection alone. Thermophoretic blowing is shown to produce effects on particle concentration boundary-layer (BL) structure and wall mass transfer rates similar to those produced by real blowing through a porous wall. The applicability of the correlations to developing BL-situations is demonstrated by a numerical example relevant to wet-steam technology.

Gokoglu, Suleyman A.↗

Small particle melting of pure metals

Submicron-sized crystallites of lead, tin, indium and bismuth were melted in situ in the modified specimen chamber of a Siemens transmission e lectron microscope. Melting point and size determinations were made directly from the dark field images of the crystallites. Particles exhibited melting points that decreased with decreasing particle size. A near-linear relationship was observed for the melting point as a function of the reciprocal of the radius. Thermodynamnic expressions based on the significant contributions of the surface energy to the free energy of the system also suggest a linear relation. Other factors, such as shape and surface contamination, were also observed to affect the size-dependent melting of particles. Crystallites of extended platelet shape did not exhibit a significant depression in melting point. Elevated residual gas pressures were found to lessen the melting point depression of spherical particles.

Allen, G. L.↗

Rainout lifetimes of highly soluble aerosols and gases as inferred from simulations with a general circulation model

The rainout-determined lifetimes of highly soluble particulate and gaseous atmospheric compounds are investigated using general circulation model simulations in which removal is explicitly calculated in terms of the local, model-produced precipitation rates. The calculations indicate that because of the episodic and asymmetric nature of rainout, species' lifetimes depend not only on the amount of precipitation but also on the characteristics of the precipitation regime (such as duration and frequency of the precipitation events) and on the direction of the tracer main flow (determined by the species' average mixing ratio gradient). For this reason, averaged rainout lifetimes of tracers flowing downstream from the stratosphere are found to differ substantially from those of tracers of surface origin flowing upward or tracers of a more ubiquitous tropospheric source. These results imply that the use of a first-order parameterization to simulate rainout in a photochemical model that does not explicitly calculate precipitation can be inadequate in representing this process. A computationally efficient parameterization that includes the effects of intermittence and asymmetry of rainout is proposed, and it is shown how this parameterization can be used to estimate rainout-determined tropospheric residence times from observational data sets. A review of published estimates of submicron aerosol tropospheric residence times based on observations shows that these are consistent with the model results.

Giorgi, Filippo↗

Local variation of haze thickness on the equatorial region of Venus

The horizontal distribution of haze particles in the equatorial region of Venus was investigated using selected polarimetry maps obtained by the Orbiter Cloud Photopolarimeter (OCP) aboard the Pioneer Venus Orbiter, with five of these maps having been acquired on five consecutive terrestrial days. Nine sets of OCP polarimetry maps (PM) similar to PM 16 employed by Kawabata et al. (1980) were selected, and 935 nm data points were extracted to construct a cloud-haze model, from which the haze fraction f(h) within the cloud and the corresponding optical thickness tau(h) were determined for the period from December 1978 to October 1980. The results indicate that, in this period, the upper cloud layer of Venus had haze layers with tau(h) of about 0.02. Furthermore, the submicron particles present within the principal cloud contributed approximately 6 percent to the total scattering cross section per unit volume. Although no systematic time variations in the derived values of tau(h) and f(h) were noticeable, the consecutive five day observations indicated a presence of a large-scale horizontal inhomogeneity in haze particle distribution.

Kawabata, Kiyoshi↗

Dunes in the north polar region of Mars - Their possible formation from low-density sedimentary aggregates

Low-density aggregates composed of submicron clay aerosols were formed experimentally as the sublimation residues of masses of dust-nucleated ice. These ice-dust mixtures are considered to be possible analogs of materials of Martian north polar deposits. Low-density (0.002 g/cu cm) spheroidal pellets formed from these materials in wind tunnel experiments are studied as possible candidates for the formation of dunes in the north polar region of Mars. It is shown that these particles move like sand grains under conditions of saltation and, taken in sufficient quantities, can form the dunes observed in the north circumpolar erg.

Saunders, R. S.↗