Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Investigation of N2 adsorption on Fe3O4(001) using ambient pressure X-ray photoelectron spectroscopy and density functional theory

Reactions on iron oxide surfaces are prevalent in various chemical processes from heterogeneous catalysts to minerals. Nitrogen (N2) is known to dissociate on iron surfaces, a precursor for ammonia production in the Haber–Bosch process, where the dissociation of N2 is the limiting step in the reaction under equilibrium conditions. However, little is known about N2 adsorption on other iron-based materials, such as iron oxide surfaces that are ubiquitous in soils, steel pipelines, and other industrial materials. An atomistic description is reported for the binding of N2 on the Fe3O4(001) surface using first principles calculations with ambient pressure X-ray photoelectron spectroscopy. Two primary adsorption sites are experimentally identified from N2 dissociation on Fe3O4(001). The electronic signatures associated with the valence band region unambiguously show how the electronic structure of magnetite transforms near ambient pressures due to the binding of atomic nitrogen to different surface sites. Overall, the experimental and theoretical results of our study bridge the gap between ultra-high vacuum studies and reaction conditions to provide insight into other nitrogen-based chemistry on iron oxide surfaces that impact the agriculture and energy industries.

Degaga, Gemechis D. (ORCID:0000000205097118)↗
DOE OSTI2024

Facet-Dependent Ni Segregation in a Micron-Sized Single-Crystal Li 1.2 Ni 0.2 Mn 0.6 O 2 Cathode

Elemental surface segregation in cathode materials is critical for determining the phase and interfacial reaction between electrode and electrolyte, which consequently affects the electrochemical properties. Single-crystal cathode of Li 1.2 Ni 0.2 Mn 0.6 O 2 and Li 1.2 Ni 0.2 Mn 0.6 O 1.95 F 0.05 with an octahedral morphology of (102) and (003) dominated facets have been manifested to show enhanced electrochemical properties. However, the surface structural features of such single crystals have not been investigated. Herein, using scanning transmission electron microscopy, energy dispersive X-ray spectroscopy, and electron energy loss spectroscopy, we probe the elemental surface segregation characteristics in these single-crystal cathode. We reveal that Ni surface segregation shows dependence on the crystal facet such that it occurs on crystal facets with a mix of cations and anions, but not on the facets with only cations or anions. Furthermore, facet-dependent surface reconstructions are observed, featuring a spinel-like structure at the Ni-rich facet but rock-salt structure at the facet without Ni segregation. The commonly known Mn reduction appears at the single crystal surfaces, more pronounced at the facet without Ni segregation. We further reveal that fluorination leads to the stabilization of surface oxygens. In conclusion, this study provides detailed structural and chemical information about the facet-dependent Ni surface segregation and the resulted phase formation in the rather less explored micron-sized octahedral Li 1.2 Ni 0.2 Mn 0.6 O 2 and Li 1.2 Ni 0.2 Mn 0.6 O 1.95 F 0.05 single crystals, which is key to further exploration of electrochemical properties of cathode in the form of micro-sized single crystal.

25 ENERGY STORAGE↗
DOE OSTI2026

Photovoltage behaviour of p-Sb 2 S 3 photocathodes for hydrogen evolution: effect of n-In 2 S 3 passivation layers

The 1.76 eV band gap of antimony(iii) sulphide (Sb 2 S 3 ) makes this semiconductor material a promising light absorber for photoelectrochemical water splitting, but scalable fabrication approaches to efficient devices are still lacking. Here we show that compact Sb 2 S 3 films on FTO can be obtained by electrochemical growth from aqueous colloidal sulphur and antimony trichloride solutions, followed by mild annealing. These films can be converted into hydrogen evolution photocathodes after coating with In 2 S 3 passivation layers and the addition of Pt proton reduction co-catalysts. For the first time, vibrating Kelvin probe surface photovoltage (VKP-SPV) spectroscopy is used to observe the carrier dynamics in such photoelectrodes. While the bare Sb 2 S 3 films suffer from high surface recombination rates and poor electron extraction, the In 2 S 3 overlayer is found to raise the photovoltage and cathodic photocurrent density, due to passivation of surface defects and formation of a p–n heterojunction. In thick In 2 S 3 films, these benefits are offset by shading and slow electron transfer. Also, we find that O 2 strongly affects the band bending in the Sb 2 S 3 –air and In 2 S 3 –air junctions and their photovoltage. The optimised devices evolve H 2 at 77.5% Faradaic efficiency and with 0.084% applied bias photon-to-current efficiency (ABPE) at 0.12 V vs. RHE. The low ABPE value is attributed to Sb 2 S 3 sub-bandgap defects visible in SPV spectra, the random orientation of Sb 2 S 3 crystallites in the films, which inhibits charge transport, the absence of crystal facets of Sb 2 S 3 , and a detrimental Schottky junction at the FTO|Sb 2 S 3 interface.

de Araújo, Moisés A. [University of California, Da↗
DOE OSTI2025

Probing Plasmonic Near-Fields in Oxide-Modified Aluminum Nanocubes Using Photon-Induced Near-Field Electron Microscopy

Plasmonic nanoparticles generate strong electric fields near their surface upon photoexcitation, enabling applications in sensing, spectroscopy, and photocatalysis. Electron microscopy techniques – such as cathodoluminescence and electron energy loss spectroscopy – have been leveraged to produce nanoscale maps of localized surface plasmon (LSP) modes. More recently, photon-induced near-field electron microscopy (PINEM) has emerged as a powerful technique for imaging evanescent near-fields generated by ultrafast laser excitation. In this work, we employ PINEM within an ultrafast electron microscope, complemented by numerical calculations to investigate how optical polarization, surface modification, and light intensity affect the evanescent fields associated with LSPs on oxide-modified aluminum nanocubes. Polarization control of the incident light field enables spatial mapping of the nanocube’s LSPs at the single particle level. Systematic variation of the oxide layer thickness reveals that increased coating thickness correlates with a stronger PINEM signal and a greater energy gain of probing electrons. Additionally, higher light intensities at fixed polarization and oxide coating further amplify the PINEM signal. These findings demonstrate the utility of PINEM as a high-resolution technique for optical near-field imaging and spectroscopy of single plasmonic nanoparticles. The ability to probe single particle behavior offers new opportunities for advancing the design and characterization of nanophotonic and plasmonic materials.

PINEM↗
DOE OSTI2023

Measuring Photoexcited Electron and Hole Dynamics in ZnTe and Modeling Excited State Core-Valence Effects in Transient Extreme Ultraviolet Reflection Spectroscopy

Transient extreme ultraviolet (XUV) spectroscopy is becoming a valuable tool for characterizing solar energy materials because it can separate photoexcited electron and hole dynamics with element specificity. We use surface-sensitive femtosecond XUV reflection spectroscopy to separately measure photoexcited electron, hole, and band gap dynamics of ZnTe, a promising photocathode for CO 2 reduction. We develop an ab initio theoretical framework based on density functional theory and the Bethe-Salpeter equation to robustly assign the complex transient XUV spectra to the material's electronic states. Applying this framework, we identify the relaxation pathways and quantify their time scales in photoexcited ZnTe, including subpicosecond hot electron and hole thermalization, surface carrier diffusion, ultrafast band gap renormalization, and evidence of acoustic phonon oscillations.

14 SOLAR ENERGY↗
DOE OSTI2021

Chemisorbed oxygen or surface oxides steer the selectivity in Pd electrocatalytic propene oxidation observed by operando Pd L-edge X-ray absorption spectroscopy

Controlled electrochemical oxidation of hydrocarbons to desired products is an attractive approach in catalysis. Here we study the electrochemical propene oxidation under operando conditions using Pd L-edge X-ray absorption spectroscopy (XAS) as a sensitive probe to elucidate surface processes occurring during catalysis. Together with ab initio multiple-scattering calculations, our XAS results enable assignment of characteristic changes of the Pd L-edge intensity and energy position in terms of a mechanistic understanding of the selective oxidation of propene. The results, supported by electrochemical density functional theory DFT simulations, show that in the potential range of 0.8–1.0 V vs. the reversible hydrogen electrode (RHE), selective oxidation of propene to acrolein and acrylic acid occurs on the metallic Pd surface. Here, these reactions are proposed to proceed via the Langmuir–Hinshelwood mechanism. In contrast, for the potential range of 1.1–1.3 V vs. RHE, selective oxidation of propene to propylene glycol takes place on a Pd oxide surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Multiband Fermi surface in $1T–$$\mathrm{VSe_2}$ and its implication for the charge density wave phase

Angle-resolved photoemission spectroscopy experiments reveal a surprisingly richer surface electronic structure in $1T–$$\mathrm{VSe_2}$ than previously predicted or probed. Earlier claims supporting a charge density wave phase in this material are reexamined in terms of these findings and are found to be untenable. Here, the Fermi surface is found to be gapless, while band warping effects, currently attributed to three-dimensional lattice distortion, result from the simultaneous dispersion of the closely lying multiple bands. Based on these findings, a charge density wave scenario in $1T–$$\mathrm{VSe_2}$ is unlikely. On the other side, the presence of multiple states crossing the Fermi level should constitute relevant constraints for any viable microscopic model of the structural phase transition of $\mathrm{VSe_2}$.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Surface reconstructions and electronic structure of metallic delafossite thin films

The growing interest in the growth and study of thin films of low-dimensional metallic delafossites, with the general formula ABO2, is driven by their potential to exhibit electronic and magnetic characteristics that are not accessible in bulk systems. The layered structure of these compounds introduces unique surface states as well as electronic and structural reconstructions, making the investigation of their surface behavior pivotal to understanding their intrinsic electronic structure. In this work, we study the surface phenomena of epitaxially grown PtCoO2, PdCoO2, and PdCrO2 films, utilizing a combination of molecular-beam epitaxy and angle-resolved photoemission spectroscopy. Through precise control of surface termination and treatment, we discover a pronounced 3×3 surface reconstruction in PtCoO2 films and PdCoO2 films, alongside a 2 × 2 surface reconstruction observed in PdCrO2 films. These reconstructions have not been reported in prior studies of delafossites. Furthermore, our computational investigations demonstrate the BO2 surface’s relative stability compared to the A-terminated surface and the significant reduction in surface energy facilitated by the reconstruction of the A-terminated surface. These experimental and theoretical insights illuminate the complex surface dynamics in metallic delafossites, paving the way for future explorations of their distinctive properties in low-dimensional studies.

Materials Science↗
DOE OSTI2020

Realizing gapped surface states in the magnetic topological insulator Mn Bi 2 - x Sb x Te 4

The interplay between magnetism and nontrivial topology in magnetic topological insulators (MTIs) is expected to give rise to exotic topological quantum phenomena like the quantum anomalous Hall effect and the topological axion states. A key to assessing these novel properties is to realize gapped topological surface sates. MnBi 2 Te 4 possesses nontrivial band topology with an intrinsic antiferromagnetic state. However, the highly electron-doped nature of the MnBi 2 Te 4 crystals obstructs the exhibition of the surface band gap. Here, we tailor the material through Sb substitution to reveal the gapped surface states in MnBi 2-x Sb x Te 4 . By shifting the Fermi level into the bulk band gap, we access the surface states and show a band gap of 50 meV at the Dirac point from quasiparticle interference measured by scanning tunneling microscopy (STM). Surface-dominant conduction is confirmed through transport spectroscopy measured by multiprobe STM below the Néel temperature. The surface band gap is robust against the out-of-plane magnetic field despite the promotion of field-induced ferromagnetism. Finally, the realization of bulk-insulating MTIs with the large exchange gap offers a promising platform for exploring emergent topological phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Revisiting heat treatment and surface activation of GaAs photocathodes: In situ studies using scanning tunneling microscopy and photoelectron spectroscopy

The lifetime of GaAs photocathodes in polarized electron guns is limited due to the delicate activation layer. An atomically clean and smooth GaAs surface is needed to deposit a robust activation layer, such as Cs 2 Te, with longer lifetime compared to traditional (Cs,O) activation. A previous experiment with Cs 2 Te activation on GaAs used heat cleaning temperatures around 400°C to avoid an increase in surface roughness [Bae et al., Appl. Phys. Lett. 112, 154101 (2018)]. Furthermore, high-temperature heat cleaning around 580°C, which results in a relatively contamination-free surface, could be one possible way to improve quantum efficiency. However, one should be cautious about surface roughness degradation during high-temperature heat cleaning. In this paper, we report results of surface roughness measurements on native, heat cleaned, and (Cs,O) activated GaAs photocathodes under vacuum. The results, measured by ultrahigh vacuum scanning tunneling microscopy, show that the surface roughness improves as the heat cleaning temperature is increased, by at least a factor of three for 580°C heat cleaning, compared to the native sample. Activation with (Cs,O) is shown to increase surface roughness by a factor of four compared to a 580°C heat cleaned sample. This confirms that high-temperature heat cleaning can be useful for depositing good quality robust activation layers on GaAs. Additionally, we also report chemical analysis for each step of preparation for p-doped GaAs photocathodes using X-ray photoelectron spectroscopy (XPS), angle-resolved XPS, and ultraviolet photoelectron spectroscopy. Our results indicate that the (Cs,O) activation layer forms a sandwich structure consists of Cs and oxygen. We found no formation of any specific compound such as Cs 2 O or Cs 11 O 3 .

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Crystallographic registry in epitaxial V3O5 thin films

Crystallographic orientation plays a central role in determining transport properties in correlated oxides with low-hysteresis metal–insulator transitions. Here, V3O5 thin films were grown on Al2O3 (0001) and their crystallographic registry was evaluated using x-ray diffraction and cross-sectional transmission electron microscopy. θ–2θ measurements show a single out-of-plane orientation defined by the (202) reflection. Azimuthal φ-scans of the V3O5 (310) reflection exhibit twelve discrete maxima over 360°, indicating a finite set of in-plane orientations imposed by the substrate symmetry. High-resolution TEM and fast Fourier transform analysis confirm crystallographic coherence at the film–substrate interface. The electrical conductivity exhibits a metal–insulator transition at TMIT ≈ 423 K with no measurable thermal hysteresis and a total change of ~1.6 orders of magnitude between 300 and 480 K. These results establish crystallographic registry in epitaxial V3O5 thin films and provide a structurally well-defined system for future studies of orientation-dependent transport.\r\nT

36 MATERIALS SCIENCE↗
DOE OSTI2021

AFM-IR and s-SNOM-IR measurements of chemically addressable monolayers on Au nanoparticles

The performance of catalysts depends on their nanoscale properties, and local variations in structure and composition can have a dramatic impact on the catalytic reactivity. Therefore, probing the localized reactivity of catalytic surfaces using high spatial resolution vibrational spectroscopy, such as infrared (IR) nanospectroscopy and tip-enhanced Raman spectroscopy, is essential for mapping their reactivity pattern. Two fundamentally different scanning probe IR nanospectroscopy techniques, namely, scattering-type scanning near-field optical microscopy (sSNOM) and atomic force microscopy-infrared spectroscopy (AFM-IR), provide the capabilities for mapping the reactivity pattern of catalytic surfaces with a spatial resolution of ~20 nm. Herein, we compare these two techniques with regard to their applicability for probing the vibrational signature of reactive molecules on catalytic nanoparticles. For this purpose, we use chemically addressable self-assembled molecules on Au nanoparticles as model systems. We identified significant spectral differences depending on the measurement technique, which originate from the fundamentally different working principles of the applied methods. While AFM-IR spectra provided information from all the molecules that were positioned underneath the tip, the s-SNOM spectra were more orientation-sensitive. Due to its field-enhancement factor, the s-SNOM spectra showed higher vibrational signals for dipoles that were perpendicularly oriented to the surface. The s-SNOM sensitivity to the molecular orientation influenced the amplitude, position, and signal-to-noise ratio of the collected spectra. Ensemble-based IR measurements verified that differences in the localized IR spectra stem from the enhanced sensitivity of s-SNOM measurements to the adsorption geometry of the probed molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tuning the fluid wetting dynamics on gold microstructures using photoactive compounds

This work demonstrates how photoactive compounds can be used to tune the surface chemistry, surface free energy, and the wetting velocity of fluids on Spiropyran functionalized surfaces with different surface microstructures. Evidence of this photowetting effect is based on data showing: (1) the cyclic changes in the static, advancing, and receding contact angles $\theta$ CA for multiple UV$\rightleftarrows$vis photoswitching cycles with both smooth and microstructured surfaces and (2) the changes in the fluid wicking velocity (via UV$\rightleftarrows$vis photoswitching) on different Spiropyran functionalized hemiwicking surfaces. X-ray photoelectron spectroscopy is used to determine the efficiency of photoswitching caused by the quality of the Spiropyran functionalization. Reversible photoisomerization of Spiropyran generates a gradient in surface free energy, resulting in a similar change in contact angle ($\theta$ CA ) in the photoswitchable surfaces. In conclusion, by incorporating these changes into the Owens-Wendt and Van Oss surface energy models, the energy of smooth Au surfaces can also be predicted for both UV and visible light irradiations, where reversible contact angle variations of $\Delta$$\theta$ CA ≈ 5–10° are achieved with both water and water-ethanol mixtures due to the conversion of SP to merocyanine, which corresponds to a total free energy change of ~13% on the photoswitchable surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Room temperature persisting surface charge carriers driven by intense terahertz electric fields in a topological insulator Bi 2 Se 3

Topologically protected surface current is highly promising for next-generation low-dissipation and disorder-tolerant quantum electronics and computing. Yet, electric transport from the co-existing bulk state dominates the responses of the Dirac surface state, especially at elevated temperatures relevant to technological applications. Here, we present an approach that convincingly showcases the generation, disentanglement, and precise control of enduring surface charge carriers on a topological insulator, Bi 2 Se 3 , with high bulk conductivity, all achieved at room temperature. By using pump–probe modulation spectroscopy under ultrabroadband driving tunable from 4 meV to 1.55 eV, we show the terahertz (THz) field-induced surface carriers by discovering their initial temporal responses dominant over high density trivial bulk carriers. Strikingly, the response of the induced surface carrier responses persists for more than ~5 ps and is enhanced by reducing pump photon energy. The dynamics and lifetime of the distinct surface response manifest themselves as the enhanced THz pump-induced THz transmission, which directly correlates with the transient negative THz conductivity. Increasing the THz driving field reduces the induced surface carrier lifetime and identifies, particularly, an optimal pump field of E s ~ 224 kV cm -1 for generating the dominant surface response relative to the bulk. This surface carrier dominant regime is suppressed by a joint effect of enhanced surface-bulk scattering and a more rapid saturation of surface excitation compared to the bulk that sets in above E s . The controllability of room temperature topologically surface carriers through pump photon energy offer compelling possibilities for extending this approach to other topological complex materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The surface chemistry of colloidal lead halide perovskite nanowires

This study explored the interplay between the ligand–surface chemistry of colloidal CsPbBr 3 nanowires (NWs) and their optical properties. The ligand equilibrium was probed using nuclear magnetic resonance spectroscopy, and by perturbing the equilibrium via dilution, the gradual removal of ligands from the CsPbBr 3 surface was observed. This removal was correlated with an increase in the surface defect density, as suggested by a broadening of the photoluminescence (PL) spectrum, a decrease in the PL quantum yield (PLQY), and quenching of the PL decay. These results highlight similar surface binding between the traditional CsPbBr 3 quantum dots and our NWs, thereby expanding the scope of well-established ligand chemistry to a relatively unexplored nanocrystal morphology. In conclusion, by controlling the dilution factor, it was revealed that CsPbBr 3 NWs achieve a PLQY of 72% ± 2% and a relatively long average PL lifetime of 400 ± 10 ns, without relying on additional surface passivation techniques, such as ligand exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Probing Surface Hydration and Isotope Exchange Kinetics in Proton-Conducting Ceramics Using DRIFTS and EIS

This internship project investigates how water vapor partial pressure (pH2O) affects surface hydration and H/D isotope-exchange kinetics in BaZr0.4Ce0.4Y0.1Yb0.1O3?d (4411) proton-conducting ceramic electrolytes. Diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS) is used to monitor surface hydroxyl and deuteroxyl species under controlled humidified atmospheres during gas-switching experiments. These surface kinetic trends are to be correlated with bulk, grain-boundary, and total electrolyte resistance measured by electrochemical impedance spectroscopy (EIS) under matching conditions. The future goals of this study are to clarify the relationship between surface hydration dynamics and proton conduction behavior, improving interpretation of EIS data and guiding the optimization of ceramic electrolytes for energy applications.

08 - HYDROGEN↗
DOE OSTI2020

Effects of micrometer-scale surface roughness on thermal infrared emittance spectra of silica glass

Surface roughness is known to decrease thermal infrared (TIR) absorption band intensity, but studies of the effect on geologically relevant samples are relatively limited. To determine the effect of surface roughness (with features smaller than ~2/3 of the wavelength) on TIR spectra, we investigated two glass compositions with prepared roughened surfaces: (1) high purity fused silica and (2) soda-lime glass (73 wt% SiO$_2$). We roughened the surfaces of the glasses by sandblasting and polishing with grit paper. The surfaces were characterized with scanning electron microscopy and stylus profilometry. We then analyzed the roughened glasses with TIR emittance spectroscopy. Micrometer-scale roughness causes a decrease in TIR absorption band intensity, relative to a specular surface. No significant changes in band shape or shifts in wavelength were detected. As roughness increases, empirical results show a logarithmic decrease in TIR absorption band intensity. The logarithmic trends of the two glass compositions are different; empirical roughness calibrations do not translate across different compositions. A linear, least-squares spectral deconvolution using two endmembers, specular and blackbody, predicts model spectra of roughened glass surfaces with relatively low error. This is of consequence to orbital TIR measurements of poorly constrained targets, such as the martian surface, because micrometer-scale roughness is adequately modeled by the addition of a blackbody spectrum to the deconvolution endmember matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Journal Pre-proof3D printed polylactic acid and acrylonitrile butadiene styrene fluidicstructures for biological applications: tailoring bio-material interfaceviasurface modification

Three-dimensional (3D) printing is a rapidly growing technology that best fits for cell culture and other biological applications due to its potential to build immensely complex structures from customized designs. However, use of 3D printed structures for cell adhesion, proliferation, and activation requires tailoring of surface characteristics. In this context, this work investigates the use of two biocompatible 3D printable polymer materials, Poly-L-lactic Acid (PLA) and Acrylonitrile Butadiene Styrene (ABS) for bio applications, and the effect of their post-printing surface modification processes to achieve desired bio functionality. Three post-printing surface modification techniques, alkaline hydrolysis, ultraviolet ozone plasma irradiation and gold thin film deposition are performed with the objective of introducing useful levels of surface functionalities. Poly-L-lysine (PLL) labelled with FITC chromophore is immobilized on the surface modified samples following standard protocols. The effect of surface roughness and porosity of the 3D printed structures on the polypeptide immobilization is compared on as-printed versus mechanically polished surfaces. Different characterization methods, viz., Fluorescence microscopy, Raman Spectroscopy and UV–vis spectroscopy, are used to study the efficacy of the surface modification and PLL immobilization techniques. Our results demonstrated denser PLL attachment on polished hydrolyzed PLA and ABS surfaces which enables the use of these printable polymers for a range of applications such as tissue scaffolds and microfluidics.

3D Printing, PLA, ABS, Biodegradable Polymer, Surf↗