Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

A search for solar related changes in tropospheric weather

The possibility that solar variations associated with the 11-year solar cycle may be the cause of the changes in tropospheric weather and climate has been the subject to scientific investigation for several decades. Meteorologists are greatly concerned with the changes in tropospheric phenomena. An attempt was made to find solar activity related changes in tropospheric weather, by the modulation of the quasi-biennial oscillation (QBO) of zonal wind at 50 mb. Rainfall and surface temperature data for a period of about three solar cycles, 1953 to 1988, from various stations in the Indian subcontinent were utilized. By extension, a possible teleconnection was looked for between the temperature changes in middle atmospheric levels and surface temperature when the data are stratified according to east or west phase of the QBO. The temperature data were averaged for January and February to represent the winter temperature and for July and August to represent the summer temperature.

Mohanakumar, K.↗
NASA NTRS1982

Ion temperature variations in the daytime high-latitude F region

The Schunk and Sojka (1981a, b) high latitude ionospheric model is improved through the inclusion of thermal conduction and diffusion terms in the ion energy equation, permitting the study of daytime, high latitude F layer temperature variations in a region poleward of the auroral oval. It is found that ion temperature variation with solar cycle, season and geomagnetic activity closely follows the neutral atomic oxygen variation, and that meridional electric fields of more than 40 mV/m can cause larger ion temperature changes than those due to solar cycle, seasonal or geomagnetic activity variations. In the presence of meridional electric fields, there is an upward flow of heat from the lower ionosphere that also acts to raise ion temperatures at high altitudes. Zonal electric fields affect ion temperature indirectly, through electron density changes.

Schunk, R. W.↗
DOE OSTI2022

Magnetocaloric response with significant mechanical efficiency in frustrated intermetallic compound $\mathrm{Pr_{2}Co_{0.86}Si_{2.88}}$

We report magnetically frustrated materials are considered as a promising unconventional members of caloric materials. Here, the magnetocaloric properties of the frustrated Pr 2 Co 0.86 Si 2.88 have been investigated and discussed with the aid of density functional theory (DFT) calculations. The material exhibits a magnetic entropy change (-ΔS M ) of 13.1 J/kg-K for ΔH = 70 kOe around low-temperature transition T L ~ 4 K associated with the antiferromagnetic coupling between localized Pr-4f and itinerant Co-3d moments. Despite the absence of any long-range magnetic order, the obtained - ΔS M is one of the highest among the known Pr-based good magnetocaloric materials at cryogenic temperature range. It also exhibits a relative cooling power (RCP) of ~ 201 J/kg and an adiabatic temperature change of 6.3 K around T L at 70 kOe. Moreover, the compound also exhibits a high mechanical efficiency and moderate electrical efficiency, being beneficial for possible technological applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Trends in Warm Season Mesoscale Convective Systems Over Asia in 2001–2020

Mesoscale convective systems (MCSs) frequently occur over Asia during the warm season, often producing intense precipitation with associated socioeconomic impacts. Here we reveal significant trends in MCS occurrence frequency and related precipitation in Asia during the warm season (March–September) in 2001–2020, using a tracking method that combines cloud and precipitation criteria with high-resolution satellite data from the Global Precipitation Measurement mission. To examine whether there are differences between MCSs of different scales, both meso-α scales (MαCSs) and meso-β scales (MβCSs), with horizontal scales of 200–2,000 km and 20–200 km, are tracked. The distribution pattern of frequency and related precipitation of both MαCSs and MβCSs are quite similar and manifest positive trends over East Asia (EA) and Northeast Asia, and negative trend over Southeast Asia (SEA). The MCS precipitation trend contributes significantly to total precipitation trend, with MαCSs contributing the most. Our analysis indicates the trend in lower-tropospheric water vapor flux convergence has a similar spatial pattern to the MCS frequency and related precipitation trend. Based on an atmospheric moisture flux decomposition analysis, the water vapor flux convergence trend can largely be explained by the change in horizontal wind convergence, while the specific humidity trend driven largely by temperature change plays a minor role. In conclusion, the trend in wind convergence in EA and SEA is possibly related to the evident trend in the lower-tropospheric anticyclone over the western North Pacific and SEA, which might be due to the relatively stronger warming in the Indian Ocean during the past two decades.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Investigating Temperature Uniformity and Accuracy in PV Module Lamination: A Verification Study

This study investigates the temperature uniformity and accuracy of a photovoltaic (PV) module lamination process by addressing inconsistencies identified in 2017 data where irregular temperature changes were observed across setpoints. The 2017 data showed a notable drop in temperature upon bladder initiation, except for the 145 degrees Celsius profile. This inconsistency indicated potential inaccuracies in manual data recording methods. To address this concern, a verification experiment was conducted to evaluate temperature uniformity across the 2014 Bent River SPL2828 laminator platen and within test samples. Thermocouples, paired with Omega data acquisition software, were deployed to measure temperatures at multiple platen locations and within test samples. The experiment compared lamination temperatures of polyethylene-co-vinyl acetate (EVA) encapsulant when paired with solite glass or TPE backsheets. The methodology included verifying temperature uniformity directly on the platen and by using a large glass/EVA/glass sample using multiple thermocouples. Smaller samples were built with glass/EVA/glass and glass/EVA/backsheet configurations with one centered thermocouple to verify and compare sample temperatures. This verification aims to refine lamination temperature profiles, enhance data accuracy and provide insights into optimal process control for uniform module lamination. Ensuring consistent and uniform lamination may improve the accuracy and reliability of research outcomes.

14 SOLAR ENERGY↗
NASA NTRS1992

A proposed neutral line signature

An identifying signature is proposed for the existence and location of the neutral line in the magnetotail. The signature, abrupt density, and temperature changes in the Earthtail direction, was first discovered in test particle simulations. Such temperature variations have been observed in ISEE data (Huang et. al. 1992), but their connection to the possible existence of a neutral line in the tail has not yet been established. The proposed signature develops earlier than the ion velocity space ridge of Martin and Speiser (1988), but can only be seen by spacecraft in the vicinity of the neutral line, while the latter can locate a neutral line remotely.

Doxas, I.↗
NASA NTRS2001

Quantifying Residual Stresses by Means of Thermoelastic Stress Analysis

This study focused on the application of the Thermoelastic Stress Analysis (TSA) technique as a tool for assessing the residual stress state of structures. TSA is based on the fact that materials experience small temperature changes when compressed or expanded. When a structure is cyclically loaded, a surface temperature profile results which correlates to the surface stresses. The cyclic surface temperature is measured with an infrared camera. Traditionally, the amplitude of a TSA signal was theoretically defined to be linearly dependent on the cyclic stress amplitude. Recent studies have established that the temperature response is also dependent on the cyclic mean stress (i.e., the static stress state of the structure). In a previous study by the authors, it was shown that mean stresses significantly influenced the TSA results for titanium- and nickel-based alloys. This study continued the effort of accurate direct measurements of the mean stress effect by implementing various experimental modifications. In addition, a more in-depth analysis was conducted which involved analyzing the second harmonic of the temperature response. By obtaining the amplitudes of the first and second harmonics, the stress amplitude and the mean stress at a given point on a structure subjected to a cyclic load can be simultaneously obtained. The experimental results showed good agreement with the theoretical predictions for both the first and second harmonics of the temperature response. As a result, confidence was achieved concerning the ability to simultaneously obtain values for the static stress state as well as the cyclic stress amplitude of structures subjected to cyclic loads using the TSA technique. With continued research, it is now feasible to establish a protocol that would enable the monitoring of residual stresses in structures utilizing TSA.

Gyekenyesi, Andrew L.↗
NASA NTRS2003

Thermophysical Properties of Te-based II-VI Semiconductors: Reduced Algorithms for Thermal Diffusivity Determination

This paper presents methodologies for measuring the thermal diffusivity using the difference between temperatures measured at two, essentially independent, locations. A heat pulse is applied for an arbitrary time to one region of the sample; either the inner core or the outer wall. Temperature changes are then monitored versus time. The thermal diffusivity is calculated from the temperature difference versus time. No initial conditions are used directly in the final results.

Banish, R. Michael↗
NASA NTRS1994

Heterogeneous Reactions of ClONO2, HCl, and HOCl on Liquid Sulfuric Acid Surfaces

The heterogeneous reactions of ClONO2 + H2O yields HNO3 + HOCl (1), ClONO2 + HCl yields C12 + HNO3 (2), and HOCl + HCl yields Cl2 + H2O (3) on liquid sulfuric acid surfaces have been studied using a fast flow reactor coupled to a quadrupole mass spectrometer. The main objectives of the study are to investigate: (a) the temperature dependence of these reactions at a fixed H2O partial pressure typical of the lower stratosphere (that is, by changing temperature at a constant water partial pressure, the H2SO4 content of the surfaces is also changed), (b) the relative importance or competition between reactions 1 and 2, and (c) the effect of HNO3 on the reaction probabilities due to the formation of a H2SO4/HNO3/H2O ternary system. The measurements show that all the reactions depend markedly on temperature at a fixed H2O partial pressure: they proceed efficiently at temperatures near 200 K and much slower at temperatures near 220 K. The reaction probability (gamma(sub 1)) for ClONO2 hydrolysis approaches 0.01 at temperatures below 200 K, whereas the values for gamma(sub 2) and gamma(sub 3) are on the order of a few tenths at 200 K. Although detailed mechanisms for these reactions are still unknown, the present data indicate that the competition between ClONO2 hydrolysis and ClONO2 reaction with HCl may depend on temperature (or H2SO4 Wt %): in the presence of gaseous HCl at stratospheric concentrations, reaction 2 is dominant at lower temperatures (less than 200 K), but reaction 1 becomes important at temperatures above 210 K. Furthermore, reaction probability measurements performed on the H2SO4/HNO3/ H2O ternary solutions do not exhibit noticeable deviation from those performed on the H2SO4/H2O binary system, suggesting little effect of HNO3 in sulfate aerosols on the ClONO2 and HOCl reactions with HCl. The results reveal that significant reductions in the chlorine-containing reservoir species (such as ClONO2 and HCl) can take place on stratospheric sulfate aerosols at high latitudes in winter and early spring, even at temperatures too warm for Polar Stratospheric Clouds (PSCs) to form or in regions where nucleation of PSCs is sparse. This is particularly true under elevated sulfuric acid loading, such as that after the eruption of Mt. Pinatubo. Comparisons between our results and those presently available have also been made.

Zhang, Renyi↗
DOE OSTI2020

An 8.8 ps RMS Resolution Time-To-Digital Converter Implemented in a 60 nm FPGA with Real-Time Temperature Correction

This paper presented a non-uniform multiphase (NUMP) time-to-digital converter (TDC) implemented in a field-programmable gate array (FPGA) with real-time automatic temperature compensation. NUMP-TDC is a novel, low-cost, high-performance TDC that has achieved an excellent performance in Altera Cyclone V FPGA. The root mean square (RMS) for the intrinsic timing resolution was 2.3 ps. However, the propagation delays in the delay chain of some FPGAs (for example, the Altera Cyclone 10 LP) vary significantly as the temperature changes. Thus, the timing performances of NUMP-TDCs implemented in those FPGAs are significantly impacted by temperature fluctuations. In this study, a simple method was developed to monitor variations in propagation delays using two registers deployed at both ends of the delay chain and compensate for changes in propagation delay using a look-up table (LUT). When the variations exceeded a certain threshold, the LUT for the delay correction was updated, and a bin-by-bin correction was launched. Using this correction approach, a resolution of 8.8 ps RMS over a wide temperature range (5 °C to 80 °C) had been achieved in a NUMP-TDC implemented in a Cyclone 10 LP FPGA.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

The hazard components of representative key risks. The physical climate perspective

The framework of Representative Key Risks (RKRs) has been adopted by the Intergovernmental Panel on Climate Change Working Group II in order to categorize, assess and communicate a wide range of regional and sectoral key risks, expected to become severe as a consequence of the potentially detrimental convergence of changing climate conditions, exposure and vulnerability of human and natural systems, and responses through (mal)adaptation measures. Other papers in this special issue treat each of eight RKRs by holistically assessing their current status and future evolution as a result of this convergence. However, their treatment cannot always organize such assessment according to a systematic gradation of climatic changes, often times having to extrapolate the big-picture evolution of risk from either qualitative effects of “low” medium” and “high” warming, or limited/focused analysis of the consequences of particular mitigation choices (e.g., benefits of limiting warming to 1.5 or 2C). In this study we offer as systematic a representation as possible – given current literature and assessments – of the future evolution of the hazard components of RKRs. We draw on the assessment of changes in climatic impact-drivers relevant to RKRs described in the 6th Assessment Report by Working Group 1 (WGI) supplemented when needed by more recent literature. We identify the relevant hazards for each RKR, based upon the WGII authors’ assessment, and we report on their current state and expected future changes in magnitude, intensity and/or frequency, linking these changes to Global Warming Levels to the extent possible. For some of these quantities - like regional trends in oceanic and atmospheric temperature and precipitation, some heat and precipitation extremes, permafrost thaw and Northern Hemisphere snow cover - a strong and quantitative relationship with global average temperature change has been assessed. For others - like frequency and intensity of tropical cyclones and extra-tropical storms, and fire weather - the link to increasing global temperatures can only be described qualitatively. For some processes - like the behavior of ice-sheets, or changes in circulation dynamics - large uncertainties about the effects of different levels of warming remain, and for a few others - like ocean pH and air pollution - the composition of the scenario of anthropogenic emissions is most relevant, rather than the warming reached. In almost all cases, however, the basic message remains that every small increment in CO2 concentration in the atmosphere and associated warming will bring changes in climate phenomena that will contribute to increasing risk of impacts on human and natural systems when these changes happen in conjunction with these systems’ conditions of exposure and vulnerability, and in lack of effective adaptation. Our picture of the evolution of RKR-relevant climatic impact-drivers complements and enriches the treatment of RKRs in the other papers in at least two ways: by filling in an often only cursory or limited representation of the physical climate aspects driving impacts, and by providing a fuller representation of their future possible evolution which represents an important component – if never the only one – of the potential future evolution of risk severity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

PID-Regulated Heating System for PIP-II Reference Line

The Proton Improvement Plan 2 (PIP-II) centers on building a new superconducting linear particle accelerator (Linac) at Fermilab. At the heart of the accelerator is the reference line. It is a critical system that defines the ideal path for the beam as it passes through magnets, RF cavities, and other beamline elements. Temperature stability is crucial for the reliable operation of RF components, such as mixers and filters. Fluctuations affect key performance parameters like conversion loss, isolation, and linearity. To mitigate any drift caused by ambient temperature changes, a heating plate assembly is utilized to maintain key components at a controlled temperature of 40 C. Utilizing an actively regulated heating system, a metal-oxide-semiconductor field-effect transistor (MOSFET) based power control circuit which provides input to a controller; forming a closed-loop system that maintains the desired setpoints with high precision.

Mosher, Alexander [U. Illinois, Chicago]↗
DOE OSTI2025

PID-Regulated Heating System for PIP-II Reference Line

The Proton Improvement Project-2 centers on building a new superconducting linear particle accelerator (Linac) at Fermilab. At the heart of the accelerator is the reference line, a critical system that defines the ideal path for the particle beam as it passes through magnets, RF cavities, and other beamline elements. Temperature stability is crucial for the reliable operation of RF components, such as mixers and filters. Fluctuations affect key performance parameters like conversion loss, isolation, and linearity. To mitigate any drift caused by ambient temperature changes, a heating plate assembly is utilized to maintain key components at a controlled temperature of 40°C. The system utilizes an aluminum 36”x36”x0.5” heat plate powered by a MOSFET-based control circuit, delivering approximately 460 W of thermal energy through a resistor array. Real-time temperature feedback is provided by a PT100 Resistance Temperature Detector (RTD), which interfaces with a Proportional–Integral–Derivative (PID) control algorithm to maintain closed-loop temperature regulation. The control signal actively modulates the gate voltage of an N channel MOSFET, dynamically adjusting power delivery in response to deviations from the temperature setpoint. Simulations and LTspice models validate the functionality and responsiveness of the circuit under varying conditions. The prototype has successfully demonstrated stable thermal control, paving the way for integration into the PIP-II infrastructure. The final design will feature an expanded resistor array, as well as communication with a PLC for continuous data acquisition and diagnostics. This work directly supports Fermilab’s broader mission by contributing to the stability and reliability of core accelerator systems, enhancing the precision of particle beam delivery for future physics experiments.

Mosher, Alexander [Fermilab]↗
DOE OSTI2020

Visualizing Microbial Community Dynamics via a Controllable Soil Environment

Visualizing microbial community dynamics within soil environments remains challenging. Here, we developed a custom-built SoilBox system that facilitates probing various changes occurring in microbial community development and molecular processes when exposed to environmental perturbations (e.g., temperature changes, drought, nutrient availability). Using confocal microscopy along with mass spectrometry imaging, we demonstrate the power of this system by correlating microbial growth and spatial metabolic information from soil communities under different moisture regimes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

High-temperature all-fiber non-destructive multi-parameter sensing system with consistent performance

A high-temperature all-fiber non-destructive multi-parameter sensing system is developed. The system can operate consistently in a wide range of temperature changes by specially designed active signal generation and detection units. It is capable of monitoring temperature up to 600°C and cracks on metal pipes with an acoustic wave generation unit and an acoustic detection unit. A gold-coated multi-mode fiber is used to deliver a laser pulse for acoustic excitation while minimizing parasitic acoustic signals at high temperature. An in-fiber Fabry–Perot fiber Bragg grating (FP-FBG) is fabricated in another single-mode fiber and bonded to the test object for acoustic detection. The FP-FBG avoids strain redistribution inside the bonder at high temperature to ensure consistent operation. The feasibility of the system for temperature monitoring and crack detection in real-world applications is also demonstrated on an industry-standard P91 pipe.

He, Jiaji (ORCID:0000000165661887)↗
NASA NTRS1978

On-board compensation for temporal changes in pushbroom scanner detector arrays

The design and operation of pushbroom and mechanical scanners are reviewed in order to determine differences in data preprocessing. Data preprocessing is categorized into spatial registration and radiometric corrections, as well as into systematic versus nonsystematic corrections. The category of nonsystematic radiometric errors due to temporal changes in detector array properties is emphasized as a subject of special interest and a challenging problem for onboard data preprocessing. Concepts for onboard compensation of temporal changes are presented. In particular one concept which uses dark current as an indicator of temperature change for determining gain and offset corrections is shown to have a number of advantages.

Jobson, D. J.↗
NASA NTRS1982

Volcanoes and climate

The evidence that volcanic eruptions affect climate is reviewed. Single explosive volcanic eruptions cool the surface by about 0.3 C and warm the stratosphere by several degrees. Although these changes are of small magnitude, there have been several years in which these hemispheric average temperature changes were accompanied by severely abnormal weather. An example is 1816, the "year without summer" which followed the 1815 eruption of Tambora. In addition to statistical correlations between volcanoes and climate, a good theoretical understanding exists. The magnitude of the climatic changes anticipated following volcanic explosions agrees well with the observations. Volcanoes affect climate because volcanic particles in the atmosphere upset the balance between solar energy absorbed by the Earth and infrared energy emitted by the Earth. These interactions can be observed. The most important ejecta from volcanoes is not volcanic ash but sulfur dioxide which converts into sulfuric acid droplets in the stratosphere. For an eruption with its explosive magnitude, Mount St. Helens injected surprisingly little sulfur into the stratosphere. The amount of sulfuric acid formed is much smaller than that observed following significant eruptions and is too small to create major climatic shifts. However, the Mount St. Helens eruption has provided an opportunity to measure many properties of volcanic debris not previously measured and has therefore been of significant value in improving our knowledge of the relations between volcanic activity and climate.

Toon, O. B.↗
NASA NTRS1994

A proposed neutral line signature

An identifying signature is proposed for the existence and location of the neutral line in the magnetotail. The signature, abrupt density and temperature changes in the Earth-tail direction, was first discovered in test particle simulations. Such temperature variations have been observed in International Sun Earth Explorer (ISEE) data (Huang et al., 1992), but their connection to the possible existence of a neutral line in the tail has not yet been established. The proposed signature develops earlier than the ion velocity space ridge of Martin and Speiser (1988) but can only be seen by spacecraft in the vicinity of the neutral line, while the latter can locate a neutral line remotely.

Doxas, I.↗