Search NASA⌕ Search

SEARCH · Search NASA

Results for “texture characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Commissioning of a Cask Enabling Characterization of Irradiated Nuclear Fuels with Pulsed Neutrons

Irradiation tests are a key component of nuclear fuel development and identifying typical and atypical regions in the irradiated fuel volume relies on very few characterization techniques. The goal of the effort reported here is to provide complementary measurements adding to the available parameter space for post irradiation examination as well as to inform subsequent hot cell PIE examinations by identifying typical and atypical regions with respect to microstructure, tomographic data, or isotope densities. Pulsed neutrons, enabling diffraction as well as energy-resolved neutron imaging and neutron absorption resonance spectroscopy, offer unique capabilities for this purpose. Time-of-flight neutron diffraction has the potential to offer efficient, non-destructive and non-contact microstructural characterization of irradiated fuel pins with spatial resolution of 1 mm 3 to 1 cm 3 while for energy-resolved neutron imaging (and by extension tomography) a resolution of 100 μm was demonstrated. The potential results include crystallinity vs. amorphous volumes and microstructural information such as phase compositions, lattice strains (indicative of residual stresses or chemistry variations) and textures from the diffraction data as well as distances (e.g. pellet to cladding), cracks, and isotopic distributions of minor actinides, fission products as well as fission gas partial pressures e.g. in the plenum from energy resolved neutron imaging.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

GRCop-42: Comparison between laser powder bed fusion and laser powder direct energy deposition

This study involves a comparative analysis of additively manufactured GRCop-42 specimens produced using two processes: laser-powder bed fusion (L-PBF) and laser powder direct energy deposition (LP-DED). The investigation characterizes a range of material attributes, including surface topography, internal defects, microstructural features, quasi-static mechanical properties, and fractographic characteristics. The findings demonstrate that, despite the specimens being fabricated with the same base material, the resulting material properties vary significantly between the two additive manufacturing processes. As such, material properties cannot be presumed to be uniform across different manufacturing methods. Consequently, material characterization must be conducted for individual manufacturing processes based on specific parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Progress Report on Mockup Irradiation Capsule Fuel Measurements at LANSCE

Irradiation tests are a key component of nuclear fuel development and identifying typical and atypical regions in the irradiated fuel volume relies on very few characterization techniques. The goal of the effort reported here is to provide complementary measurements adding to the available parameter space for post irradiation examination as well as to inform subsequent hot cell PIE examinations by identifying typical and atypical regions with respect to microstructure, tomographic data, or isotope densities. Pulsed neutrons, enabling diffraction as well as energy-resolved neutron imaging and neutron absorption resonance spectroscopy, offer unique capabilities for this purpose. Time-of-flight neutron diffraction has the potential to offer efficient, non-destructive and non-contact microstructural characterization of irradiated fuel specimen with spatial resolution of 1 mm 3 to 1 cm 3 while for energy-resolved neutron imaging (and by extension tomography) a resolution of 100 μm 3 was demonstrated. The potential results include crystallinity vs. amorphous volumes and microstructural information such as phase compositions, lattice strains (indicative of residual stresses or chemistry variations) and textures from the diffraction data as well as distances (e.g. pellet to cladding), cracks, and isotope densities of minor actinides, fission products as well as fission gas partial pressures e.g. in the plenum from energy resolved neutron imaging.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2024

Constraining the Thermal and Textural Evolution of Evolved Achondrite DOM 10100: Implications for Volatile Loss

Identification of evolved achrondritic clasts suggests that some early planetesimals experienced extensive differentiation and formed chemically evolved crusts. Many of these samples contain volatile-bearing phases (i.e., apatite, merrillite, nominally anhydrous minerals), which can be used to constrain volatile budgets and abundancies via in-situ measurements. These ancient crustal rocks are subject to high heat, moderate pressures, potentially hot mineral-rich fluids, and degassing that has likely modified many of these volatiles, and their abundancies do not represent the composition of the primary magma from which these achondrites formed. In this work we attempt to deconvolve the thermal evolution of these samples to provide petrologic information that can be used for making inferences regarding their volatile history, and ultimately constraining volatile budgets on planetary bodies in the early Solar System. Here, we combine in-situ major element geochemistry, thermodynamic modeling, and detailed textural and microstructural observations to reconstruct the thermal and textural evolution of howardite DOM 10100, which contains a dacite within its matrix. Previous analyses of several sections of DOM 10100 suggest that the dacitic clast is evidence for partial melting of Vesta’s differentiated basaltic crust, making it an ideal candidate for evolved crustal studies. While its igneous petrogenesis has been well constrained, there is still opportunity to better characterize its post-crystallization thermal history, including possible thermal metamorphism and cooling.

J S Gorce↗
DOE OSTI2025

Growth and structure of alpha-Ta films for quantum circuit integration

Tantalum films incorporated into superconducting circuits have exhibited low surface losses, resulting in long-lived qubit states. The remaining loss pathways originate in microscopic defects that manifest as two level systems (TLSs) at low temperatures. These defects limit performance, so careful attention to tantalum film structures is critical for optimal use in quantum devices. In this work, we investigate the growth of tantalum using magnetron sputtering on sapphire, Si, and photoresist substrates. In the case of sapphire, we present procedures for the growth of fully-oriented films with α-Ta [1 1 1]//Al2O3 [0 0 0 1] and α-Ta [1 −1 0]//Al2O3 [1 0 −1 0] orientational relationships and having residual resistivity ratio (RRR) ∼ 60 for 220 nm thick films. On Si, we find a complex grain texturing with Ta [1 1 0] normal to the substrate and RRR ∼ 30. We further demonstrate airbridge fabrication using Nb to nucleate α-Ta on photoresist surfaces. For the films on sapphire, resonators show TLS-limited quality factors of 1.3 ± 0.3 × 106 at 10 mK (for a waveguide gap and conductor width of 3 and 6 μm, respectively). Structural characterization using scanning electron microscopy, x-ray diffraction, low temperature transport, secondary ion mass spectrometry, and transmission electron microscopy reveal the dependence of residual impurities and screw dislocation density on processing conditions. The results provide practical insights into the fabrication of advanced superconducting devices including qubit arrays and guide future works on crystallographically deterministic qubit fabrication.

42 ENGINEERING↗
NASA NTRS2020

Condensation, Partial Melting and Evaporation Processes Influence the Bulk Compositions of Spinel-Cored Spherules in the CO3.1 Chondrite Miller Range 90019

Here we focus on spinel-cored spherule calcium-aluminum rich inclusions (CAI), dominantly ~75-80 microns in diameter in the CO3.1 chondrite Miller Range 90019, which make up ~ 12 % of the fine-grained CAIs in one thin section. Their mineralogical content ranges from rare grossite- and hibonite-bearing varieties, through perovskite-melilitebearing, to fassaite-bearing and finally anorthitebearing. Non-spherical CAIs have been divided into 4 other groups, defined based on mineralogical abundances. We also characterized a group of AOAs from this sample. No glass has been recognized in any inclusions. Some relatively evolved members (anorthite-, spinel- + fassaite-bearing) among the spherules are found engulfed in AOAs. We characterized the bulk compositions of ~145 CAIs and AOAs in this meteorite, derived from EDS-x-ray mapping of the inclusions. We determined bulk compositions both with and without Wark-Lovering rims (when present), which are largely composed of diopside  forsterite. The balance of the inclusions appear to have not been melted or partially melted, but rather they have textures that indicate they are condensates, often modified by extensive reaction with nebular gases. This presents the opportunity to examine effects on the bulk compositions of spherules resulting potentially from melting plus evaporation. Other aspects of this suite of refractory inclusions have been discussed in these abstracts. Oxygen isotope variations in one spherule were presented in [4]. The latter study showed a complex history of reaction with nebular gases possessing a variety of Oisotope compositions. Additional O isotopic studies of inclusions in this work are included in Mane et al.

Ross, D. K.↗
NASA NTRS2005

Optical Characterization of Cryptoendolithic Chemical Biosignatures on Antarctic Sandstone Surfaces

We have used several non-destructive optical techniques to study the distribution of organic molecules on an Antarctic sandstone sample collected at Battleship Promontory. Cryptoendolithic microorganisms have been found to inhabit rocks in the dry valleys of Antarctica. These dry deserts are an Earth analog to Mars. Future Mars rovers may search for life in the rocks of Mars with similar instrumentation used in this study. Light microscopy was used to determine five distinct regions and to determine textures on the sample. Deep ultraviolet fluorescence spectroscopy was used to scan the rock for the presence of organic molecules. Organic molecules were present in three of the five regions but not in the crust. There were similarities between each region, but each region presented a unique signature. Raman spectroscopy identified the minerals present and also provided more definitive identifications of the organic molecules. X-ray diffraction was also used to definitively identify the minerals present and corroborate the Raman mineral results.

Harju, Ellen R.↗
DOE OSTI2022

A Semiconducting Two‐Dimensional Polymer as an Organic Electrochemical Transistor Active Layer

Abstract Organic electrochemical transistors (OECTs) are devices with broad potential in bioelectronic sensing, circuits, and neuromorphic hardware. Their unique properties arise from the use of organic mixed ionic/electronic conductors (OMIECs) as the active channel. Typical OMIECs are linear polymers, where defined and controlled microstructure/morphology, and reliable characterization of transport and charging can be elusive. Semiconducting two‐dimensional polymers (2DPs) present a new avenue in OMIEC materials development, enabling electronic transport along with precise control of well‐defined channels ideal for ion transport/intercalation. To this end, a recently reported 2DP, TIIP, is synthesized and patterned at 10 µm resolution as the channel of a transistor. The TIIP films demonstrate textured microstructure and show semiconducting properties with accessible oxidation states. Operating in an aqueous electrolyte, the 2DP‐OECT exhibits a device‐scale hole mobility of 0.05 cm 2 V –1 s –1 and a µ C * figure of merit of 1.75 F cm –1 V –1 s –1 . 2DP OMIECs thus offer new synthetic degrees of freedom to control OECT performance and may enable additional opportunities such as ion selectivity or improved stability through reduced morphological modulation during device operation.

2D-polymer↗
NASA NTRS1976

Geochemistry

The most effective strategy for the geochemical study of a planet is to proceed systematically with the mineralogical and chemical characterization of its materials in accordance with geologically determined priorities. It is insufficient merely to analyze chemically the surface rocks. To appreciate the meaning of a chemical analysis, some assessment must be made of the geologic history of the sample - what its source and mode of origin are and what processes have operated upon the sample to cause chemical fractionation. Determination of mineralogy, texture, lithology, and other properties of the rock that might be relevant to origin is, therefore, necessary.

Carr, M. H.↗
NASA NTRS1985

Rapid solidification characteristics in melt spinning a Ni-base superalloy

The solidification kinetics involved in the process of melt spinning a Ni-base superalloy have been characterized. Through a correlation of ribbon thickness to melt puddle residence time, it was found that the solidification front velocity, V, is typically about 100 mm/sec at the ribbon surface not in contact with the spinning wheel. The rate of solidification varies within the ribbon, increasing with decreasing distance, S, from the wheel-contact surface as V = 3.65/s. Ribbon microstructure and texture characteristics are discussed in light of this kinetics result. The thickness-vs-time correlation was further analyzed to yield information about thermal history during ribbon formation. These thermal results are generally consistent with those deduced from dendrite arm spacing measurements.

Huang, S. C.↗
NASA NTRS2003

Classifying Urban Land Covers Using Local Indices of Spatial Complexity

The skewed statistical distributions of land cover types in complex, heterogeneous urban areas limits the effectiveness of traditional spectrally based maximum-likelihood classifiers. This work examines the utility of fractal dimension and Moran's I index of spatial autocorrelation in segmenting high-resolution panchromatic and lower-resolution multispectral imagery. Tools available in the Image Characterization and Modeling System (ICAMS) were used to analyze multi-temporal and multi-platform imagery of Atlanta, Georgia. In this example, land cover change trajectories from forest or grassland to built up land covers lead to decreased spatial autocorrelation. In lower resolution imagery such as Landsat MSS, the complex details of forested land covers and urbanized areas are smoothed, and texture-based change detection is less effective. Although segmentation of panchromatic images is possible using fractal dimension or Moran's I, widely differing land covers often yield similar values of these indices. Better results are obtained when a surface of local fractal dimension or spatial autocorrelation is combined as an additional layer in a supervised maximum-likelihood multispectral classification.

Arumugam, Mahesh↗
NASA NTRS2020

Asteroid Cooling Rates Indicated by K-Feldspar Exsolution Textures in H4 Ordinary Chondrites

Undisturbed thermal metamorphism in ordinary chondrite (OC) asteroids, produced through the radioactive decay of 26Al, is expected to result in an onion-shell-like structure. In such a structure, the inner layers of the asteroid experience more extensive thermal metamorphism, as represented by higher petrologic type, than the exterior layers. Furthermore, cooling rates are expected to be slower for OCs of high petrologic type than those of low petrologic type. However, cooling rates determined using metallographic methods and pyroxene diffusion are inconsistent with onion-shell-style cooling and have resulted in new models. These models argue for the disruption of the asteroid after peak metamorphism followed by reaccretion into a rubble pile. Improved constraints on cooling rates would provide a better understanding of the timing and scale of disruptive events. Feldspar microtextures are another tool that can be used to determine asteroid cooling rates. In OC chondrules, plagioclase is present as either a primary phase, or a secondary phase forming from the crystallization of mesostasis glass through petrologic type 4, followed by chemical and textural equilibration. Potas-sium feldspar is observed in petrologic types 3.6-6, as either patches or lamellae exsolved from albite in a perthite texture, often near pores or fractures. Exsolution occurs most commonly, and most extensively, in petrologic type 4. Because the feldspar exsolution wavelength is related to the rate at which grains cooled from the solvus temperature, determined from the mineral’s bulk composition, the chondrite cooling rate can be measured from regions of exsolution. We have previously reported the perthite exsolution cooling rate of Avanhandava, an H4 chondrite, to be 1 °C per 1-4 months over a temperature interval of 765-670 °C. A peristerite exsolution texture was also present in the Na-rich lamellae for which we estimated a cooling rate of 1 °C in 103-104 years from 570-540 °C. Overall, the cooling rates determined from Avanhandava are consistent with pyroxene diffusion (fast cooling at high temperatures) and metallographic rates (slow cooling at low temperatures), hence with the rubble pile model of disruption and reaccretion. Here, we characterize feldspar microtextures in four additional H4 chondrites to test the consistency of feldspar cooling rates across a range of samples. We show that all H4s are similar and support rubble pile models.

Lewis, J. A.↗
DOE OSTI2020

Implications of post-processing induced microstructural changes on the deformation and fracture response of additively manufactured Ti–6Al–4V

Ti–6Al–4V parts fabricated via electron beam melting (EBM) powder bed fusion are often subjected to hot isostatic pressing below the β-transus temperature to mitigate defects. During which the pressure aids in pore closure and the thermal exposure results in coarsening of α phase while retaining the columnar prior-β phase grain morphology present in the as-fabricated condition. The same post-processing treatment can also be carried out above β-transus temperature which is an effective way to modify both the grain morphology and the associated α textures. Here, the objective of this work is to correlate thermally induced microstructural changes to the deformation and fracture response of the EBM processed Ti–6Al–4V. To this end, we have carried out both sub-transus and super-transus heat-treatments of the as-fabricated material. The mechanical response of the as-fabricated and all heat-treated materials are characterized by in-situ tensile tests under a high-resolution digital optical microscope. This enabled us to capture large-scale panoramic images of the deforming microstructure, and overcome the trade-off between the image resolution and the field of view during in-situ experiments. The series of images captured throughout the imposed deformation are subsequently used to perform microstructure-based digital image correlation to measure microstructural-scale strains over a large area. The results of the in-situ tests together with detailed fractographic analyses are then used to elucidate how the heterogeneous deformation spanning over multiple microstructural length-scales, for example, at the scale of lamellae, colonies of lamellae and grain boundaries, affect the overall deformation and fracture response of the post-processed materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Enhanced Transport of TiO 2 in Unsaturated Sand and Soil after Release from Biodegradable Plastic during Composting

Biodegradable plastics can reach full degradation when disposed of appropriately and thus alleviate plastic pollution caused by conventional plastics. But additives can be released into the environment during degradation, and the fate of these additives can be affected by the degradation process. In this study, we characterized TiO 2 particles released from a biodegradable plastic mulch during composting and studied the transport of the released TiO 2 particles in inert sand and agricultural soil columns under unsaturated flow conditions. TiO 2 microparticles were released from the biodegradable plastic mulch in both single particle and cluster forms. The released TiO 2 microparticles were fully retained in unsaturated soil columns due to its ne texture, slow flow rate, and favorable attachment conditions. But in unsaturated sand columns, the released TiO 2 microparticles were highly mobile. Additionally, comparison with the pristine TiO 2 microparticles revealed that the enhanced mobility of the released TiO 2 microparticles was caused by the presence of compost residues which blocked attachment sites on the sand surface. This study demonstrates that TiO 2 microparticles can be released during composting of biodegradable plastics, and the transport potential of the released TiO 2 microparticles in the terrestrial environment can be enhanced by the presence of compost material.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1978

Arecibo radar observations of Mars surface characteristics in the Northern Hemisphere

Mars surface characteristics at and near the Viking Chryse and Tritonis Lacus landing areas were determined by radio scatter using the 12.6-cm radar at the Arecibo Observatory during 1975-76. Interpretation of each power spectrum suggests rms surface tilts of 4 deg at the final A1WNW (47.9 deg W, 22.5 deg N) site, 5 deg near the original A1 site, and 6 deg between the two. At the back-up site (A2) surface-roughness estimates were about 4 deg. Striking changes in surface texture have been found near the eastern bases of Tharsis Montes and Albor Tholus, each volcanic feature marking the western boundary of very smooth surface units. The roughness sensed at 1- to 100-m scales by radar appears to be relatively independent of the surface units defined at large scale lengths by photogeologists. Radar properties thus provide an additional means by which planetary surfaces may be characterized.

Simpson, R. A.↗
NASA NTRSDate not supplied

Aqueous alteration of Cb-type asteroid Ryugu

The samples from the asteroid Ryugu, which returned to Earth in the winter of 2020 [1], were stored under pure Nitrogen conditions at the Extraterrestrial Materials Curation Center of ISAS. After basic description [2-3], they were distributed to six initial analysis teams in Japan in June 2021. The initial analysis "Stone" team, which was responsible for the analysis of coarse particles (>1 mm in size), consisted of about 150 scientists from Japan and abroad, and conducted a series of analyses We analyzed sixteen coarse Ryugu particles 1 ~ 8 mm in size: six from the 1st touch-down site and ten from the 2nd touch-down site. Individual coarse samples were cut by Xe-FIB or wire-saw to expose particular objects or textures to be exposed on the surface based on 3D structure and element distribution obtained by synchrotron X-ray CT analysis and XRF analysis, respectively. FE-SEM/EDS and FE-EPMA/WDS analysis were made on all polished sections. TEM observation of many FIB sections was made to see microstructures and to compare with carbonaceous chondrites. Many other analyses were carried out to characterize mineralogical and compositional properties and summary of the analysis procedures is described in [4]. X-ray CT analysis showed that all sixteen Ryugu particles are composed of fine-grained material, with no chondrules and CAIs larger than 100 μm in size. FE-EPMA observation showed that Ryugu samples are breccias, consisting of many small rock fragments of different compositions, lithologies, and histories. The most common lithology includes Mg-rich saponite and serpentine, dolomite, magnesite, hydroxyapatite, pyrrhotite, and magnetite as main constituents. The mineralogy of this major lithology supports the classification of Ryugu samples as CI chondrites, which experienced extensive aqueous alteration in Ryugu’s parent asteroid. Based on the obtained mineralogical properties, we performed chemical modeling of aqueous alteration of Ryugu’s parent asteroid [5]. Numerical simulations [6-8] to reproduce thermal history and impact-induced destruction of the Ryugu’s parent asteroid were also carried out using mineralogical and physical properties of the Ryugu samples. In the talk, I would like to explain the conditions of aqueous alteration occurred in the parent asteroid of Ryugu in order to show how the water in the asteroid changed the mineralogy and chemistry of the nebular dust.

T. Nakamura↗
DOE OSTI2025

Soil Texture and Organic Matter from Teller Field Site and Barrow Environmental Observatory, Alaska, 2024

Understanding soil texture and organic matter content supports our understanding of hydrology and ecology of Arctic sites. Soil organic matter content and composition of sand, silt, and clay were measured from soils collected at the Teller 27 field site on the Seward Peninsula and at the Barrow Environmental Observatory (BEO) near Utqiaġvik, Alaska, on August 2nd and 6th 2024, respectively. Soil samples were collected from the active layer to varied depths. Precise location data were collected at each observation point using Avenza Maps on a mobile device. Sand, silt, clay, and organic matter percentages were measured at Desert Research Institute Soil Characterization and Quaternary Pedology Laboratory in Reno, NV. This dataset contains a *.csv file of soil properties, a *.kml file of measurement locations, a *.pdf user guide, a *.csv data dictionary, and a *.csv file level metadata.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

Mineralogy, petrology and chemistry of lunar rock 12039.

Rock 12039 belongs to the olivine-depleted group of magmatic rocks characterized by normative and modal SiO2, absence or very low abundance of olivine, and high FeO/(FeO + MgO), Ti/Cr, and CaO/MgO ratios. Clinopyroxenes in this rock show a complex, essentially continuous, compositional zonation from augite cores through ferroaugite to ferrohedenbergite with an abrupt discontinuity at the pyroxferroite contact and, thus, are different from pyroxene in most other Apollo 12 rocks. Two grains contain thin subcalcic pigeonite zones. Texture, presence of very fine (less than 1 micron) exsolution lamallae, and pyroxene zoning indicate a relatively rapid cooling history and pronounced in situ chemical fractionation.

Bunch, T. E.↗