Search NASA⌕ Search

SEARCH · Search NASA

Results for “thread parallelism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Repairable and Reconfigurable Structured Liquid Circuits

The advance of printed electronics is significantly bolstered by the development of liquid-state electronics that overcome the inherent limitations in flexibility and reconfigurability of solid-state electronics. By integrating the biocompatibility and conductivity of sulfonated polyaniline (S-PANI) and phytic acid (PA) with the reconfigurability of structured liquids, highly conductive all-liquid threads are developed. The dense packing and overlap of PA/S-PANI complexes at an oil/water interface promotes in-plane electron transport, and standard four-point probe measurements of PA/S-PANI interfacial assemblies demonstrate enhanced electrical properties. Notably, the rapid jetting of the ink phase into the matrix phase allows for liquid threads to be printed, enabling the fabrication of large-scale, conductive pathways between two electrodes and liquid circuits. Upon mechanical cleavage of the liquid wires, circuits can be broken, but will easily self-repair using an electric field, making this motif useful in the design of switches as well as restoring conductive pathways in series or in parallel. In conclusion, the demonstrated flexibility and reconfigurability these PA/S-PANI wires possess hold significant promise for their practical use in the design of flexible and adaptive bioelectronics that can be repaired on demand, signifying a transformative step in the evolution of liquid electronic materials.

36 MATERIALS SCIENCE↗
NASA NTRS1979

Some calculations bearing on the heating and cooling of quiescent prominences

The evolution of heat along and perpendicular to magnetic fields threading quiescent prominences is discussed. It was shown that while heating of prominence material can occur on a time scale of the order of 1000's, individual flux tubes are effectively thermally insulated from neighboring tubes, since the transverse heat conduction time scale is of the order of 10000 per year. The exact solution to the one-dimensional parallel heat conduction problem is shown to differ significantly from the approximate solution of Ioshpa (1965). It was suggested that uneven heating of a quiescent prominence by the surrounding solar corona may contribute to surges and/or the 'winking' phenomenon recorded in many quiescent prominences. The signature of such a temperature pulse would be a sharp brightening of continuum radiation with a correlated decrease in the free-bound emission, followed by a slow recovery of both to their pre-heat pulse levels.

Lerche, I.↗
DOE OSTI2019

Writing ROOT Data in Parallel with TBufferMerger

Experiments at the Large Hadron Collider (LHC) produce tens of petabytes of new data in ROOT format per year that need to be processed and analysed. In the next decade, following the planned upgrades of the LHC and its detectors, this data production rate is expected to increase at least ten-fold. Therefore, optimizing the ROOT I/O subsystem is of critical importance to the success of the LHC physics programme. This contribution presents ROOT’s approach for writing data from multiple threads to a single output file in an efficient way. Technical aspects of the implementation—the TBufferMerger class—and programming model examples are described. Measurements of runtime performance and the overall improvement relative to the case of serial data writing are also discussed.

47 OTHER INSTRUMENTATION↗
DOE OSTI2017

On the Scalability of Data Reduction Techniques in Current and Upcoming HPC Systems from an Application Perspective

We implement and benchmark parallel I/O methods for the fully-manycore driven particle-in-cell code PIConGPU. Identifying throughput and overall I/O size as a major challenge for applications on today’s and future HPC systems, we present a scaling law characterizing performance bottlenecks in state-of-the-art approaches for data reduction. Consequently, we propose, implement and verify multi-threaded data-transformations for the I/O library ADIOS as a feasible way to trade underutilized host-side compute potential on heterogeneous systems for reduced I/O latency.

Huebl, Axel↗
DOE OSTI2020

The Minos Computing Library: Efficient Parallel Programming for Extremely Heterogeneous Systems

Hardware specialization has become the silver bullet to achieve efficient high performance, from Systems-on-Chip systems, where hardware specialization can be ``extreme'', to large-scale HPC systems. As the complexity of the systems increases, so does the complexity of programming such architectures in a portable way. This work introduces the Minos Computing Library (MCL), as system software, programming model, and programming model runtime that facilitate programming extremely heterogeneous systems. MCL supports the execution of several multi-threaded applications within the same compute node, performs asynchronous execution of application tasks, efficiently balances computation across hardware resources, and provides performance portability. We show that code developed on a personal desktop automatically scales up to fully utilize powerful workstations with 8 GPUs and down to power-efficient embedded systems. MCL provides up to 17.5x speedup over OpenCL on NVIDIA DGX-1 systems and up to 1.88x speedup on single-GPU systems. In multi-application workloads, MCL dynamically resource allocation provides up to 2.43x performance improvement over manual, static allocation of computing resources.

Gioiosa, Roberto↗
DOE OSTI2019

Reverse-Mode Algorithmic Differentiation of an OpenMP-Parallel Compressible Flow Solver

y Reverse-mode algorithmic differentiation (AD) is an established method for obtaining adjoint derivatives of computer simulation applications. In computational fluid dynamics (CFD), adjoint derivatives of a cost function output such as drag or lift with respect to design parameters such as surface coordinates or geometry control points are a key ingredient for shape optimization, uncertainty quantification and flow control. The computational cost of CFD applications and their derivatives makes it essential to use high-performance computing hardware efficiently, including multi- and many-core architectures. Nevertheless, OpenMP is not supported in most AD tools, and previously shown methods achieve poor scalability of the derivative code. We present the AD of an OpenMP-parallelized finite volume compressible flow solver for unstructured meshes. Our approach enables us to reuse the parallelization of the original code in the computation of adjoint derivatives. The method works by identifying code segments that can be differentiated in reverse-mode without changing their memory access pattern. The OpenMP parallelization is integrated into the derivative code during the build process in a way that is robust to modifications of the original code and independent of the OpenMP support of the differentiation tool. We show the scalability of our adjoint CFD solver on test cases ranging from thousands to millions of finite volume mesh cells on CPUs with up to 16 threads as well as on an Intel XeonPhi card with 236 threads. We demonstrate that our approach is more practical to implement for production-sized CFD codes and produces more efficient adjoint derivative code than previously shown AD methods.

Huckelheim, Jan↗
DOE OSTI2016

Parallel sort with a ranged, partitioned key-value store in a high perfomance computing environment

Improved sorting techniques are provided that perform a parallel sort using a ranged, partitioned key-value store in a high performance computing (HPC) environment. A plurality of input data files comprising unsorted key-value data in a partitioned key-value store are sorted. The partitioned key-value store comprises a range server for each of a plurality of ranges. Each input data file has an associated reader thread. Each reader thread reads the unsorted key-value data in the corresponding input data file and performs a local sort of the unsorted key-value data to generate sorted key-value data. A plurality of sorted, ranged subsets of each of the sorted key-value data are generated based on the plurality of ranges. Each sorted, ranged subset corresponds to a given one of the ranges and is provided to one of the range servers corresponding to the range of the sorted, ranged subset. Each range server sorts the received sorted, ranged subsets and provides a sorted range. A plurality of the sorted ranges are concatenated to obtain a globally sorted result.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2014

Induced spin-accumulation and spin-polarization in a quantum-dot ring by using magnetic quantum dots and Rashba spin-orbit effect

The effect of magnetic contacts on spin-dependent electron transport and spin-accumulation in a quantum ring, which is threaded by a magnetic flux, is studied. The quantum ring is made up of four quantum dots, where two of them possess magnetic structure and other ones are subjected to the Rashba spin-orbit coupling. The magnetic quantum dots, referred to as magnetic quantum contacts, are connected to two external leads. Two different configurations of magnetic moments of the quantum contacts are considered; the parallel and the anti-parallel ones. When the magnetic moments are parallel, the degeneracy between the transmission coefficients of spin-up and spin-down electrons is lifted and the system can be adjusted to operate as a spin-filter. In addition, the accumulation of spin-up and spin-down electrons in non-magnetic quantum dots are different in the case of parallel magnetic moments. When the intra-dot Coulomb interaction is taken into account, we find that the electron interactions participate in separation between the accumulations of electrons with different spin directions in non-magnetic quantum dots. Furthermore, the spin-accumulation in non-magnetic quantum dots can be tuned in the both parallel and anti-parallel magnetic moments by adjusting the Rashba spin-orbit strength and the magnetic flux. Thus, the quantum ring with magnetic quantum contacts could be utilized to create tunable local magnetic moments which can be used in designing optimized nanodevices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1994

An overview of the Opus language and runtime system

We have recently introduced a new language, called Opus, which provides a set of Fortran language extensions that allow for integrated support of task and data parallelism. lt also provides shared data abstractions (SDA's) as a method for communication and synchronization among these tasks. In this paper, we first provide a brief description of the language features and then focus on both the language-dependent and language-independent parts of the runtime system that support the language. The language-independent portion of the runtime system supports lightweight threads across multiple address spaces, and is built upon existing lightweight thread and communication systems. The language-dependent portion of the runtime system supports conditional invocation of SDA methods and distributed SDA argument handling.

Mehrotra, Piyush↗
DOE OSTI2015

Planning for Pre-Exascale Platform Environment (Fiscal Year 2015 Level 2 Milestone 5216)

This Plan for ASC Pre-Exascale Platform Environments document constitutes the deliverable for the fiscal year 2015 (FY15) Advanced Simulation and Computing (ASC) Program Level 2 milestone Planning for Pre-Exascale Platform Environment. It acknowledges and quantifies challenges and recognized gaps for moving the ASC Program towards effective use of exascale platforms and recommends strategies to address these gaps. This document also presents an update to the concerns, strategies, and plans presented in the FY08 predecessor document that dealt with the upcoming (at the time) petascale high performance computing (HPC) platforms. With the looming push towards exascale systems, a review of the earlier document was appropriate in light of the myriad architectural choices currently under consideration. The ASC Program believes the platforms to be fielded in the 2020s will be fundamentally different systems that stress ASC’s ability to modify codes to take full advantage of new or unique features. In addition, the scale of components will increase the difficulty of maintaining an errorfree system, thus driving new approaches to resilience and error detection/correction. The code revamps of the past, from serial- to vector-centric code to distributed memory to threaded implementations, will be revisited as codes adapt to a new message passing interface (MPI) plus “x” or more advanced and dynamic programming models based on architectural specifics. Development efforts are already underway in some cases, and more difficult or uncertain aspects of the new architectures will require research and analysis that may inform future directions for program choices. In addition, the potential diversity of system architectures may require parallel if not duplicative efforts to analyze and modify environments, codes, subsystems, libraries, debugging tools, and performance analysis techniques as well as exploring new monitoring methodologies. It is difficult if not impossible to selectively eliminate some of these activities until more information is available through simulations of potential architectures, analysis of systems designs, and informed study of commodity technologies that will be the constituent parts of future platforms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Bringing OpenCL to Commodity RISC-V CPUs

The importance of open-source hardware has been increasing in recent years with the introduction of the RISC-V Open ISA. This has also accelerated the push for support of the open-source software stack from compiler tools to full-blown operating systems. Parallel computing with today’s Application Programming Interfaces such as OpenCL has proven to be effective at leveraging the parallelism in commodity multi-core processors and programmable parallel accelerators. However, to the best of our knowledge, there is currently no publicly available implementation of OpenCL targeting commodity RISC-V processors that is accessible to the open-source community. Besides opening RISC-V to the existing rich variety of scientific parallel applications, OpenCL also provides access to a unique genre of benchmarks useful in computer architecture research. In this work, we extended an Open-source implementation of OpenCL to target RISC-V CPUs. Our work not only cover commodity multi-core RISC-V processors, but also plethora of low- profile embedded RISC-V CPUs that often do not support atomic instructions or multi-threading.

Tine, Blaise↗
DOE OSTI2017

Effective Vectorization with OpenMP 4.5

This paper describes how the Single Instruction Multiple Data (SIMD) model and its extensions in OpenMP work, and how these are implemented in different compilers. Modern processors are highly parallel computational machines which often include multiple processors capable of executing several instructions in parallel. Understanding SIMD and executing instructions in parallel allows the processor to achieve higher performance without increasing the power required to run it. SIMD instructions can significantly reduce the runtime of code by executing a single operation on large groups of data. The SIMD model is so integral to the processor s potential performance that, if SIMD is not utilized, less than half of the processor is ever actually used. Unfortunately, using SIMD instructions is a challenge in higher level languages because most programming languages do not have a way to describe them. Most compilers are capable of vectorizing code by using the SIMD instructions, but there are many code features important for SIMD vectorization that the compiler cannot determine at compile time. OpenMP attempts to solve this by extending the C++/C and Fortran programming languages with compiler directives that express SIMD parallelism. OpenMP is used to pass hints to the compiler about the code to be executed in SIMD. This is a key resource for making optimized code, but it does not change whether or not the code can use SIMD operations. However, in many cases critical functions are limited by a poor understanding of how SIMD instructions are actually implemented, as SIMD can be implemented through vector instructions or simultaneous multi-threading (SMT). We have found that it is often the case that code cannot be vectorized, or is vectorized poorly, because the programmer does not have sufficient knowledge of how SIMD instructions work.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Multigroup Monte Carlo on GPUs: Comparison of history- and event-based algorithms

This article presents an investigation of the performance of different multigroup Monte Carlo transport algorithms on GPUs with a discussion of both history-based and event-based approaches. Several algorithmic improvements are introduced for both approaches. By modifying the history-based algorithm that is traditionally favored in CPU-based MC codes to occasionally filter out dead particles to reduce thread divergence, performance exceeds that of either the pure history-based or event-based approaches. The impacts of several algorithmic choices are discussed, including performance studies on Kepler and Pascal generation NVIDIA GPUs for fixed source and eigenvalue calculations. Single-device performance equivalent to 20–40 CPU cores on the K40 GPU and 60–80 CPU cores on the P100 GPU is achieved. Last, in addition, nearly perfect multi-device parallel weak scaling is demonstrated on more than 16,000 nodes of the Titan supercomputer.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

TomocuPy – efficient GPU-based tomographic reconstruction with asynchronous data processing

Fast 3D data analysis and steering of a tomographic experiment by changing environmental conditions or acquisition parameters require fast, close to real-time, 3D reconstruction of large data volumes. Here a performance-optimized TomocuPy package is presented as a GPU alternative to the commonly used central processing unit (CPU) based TomoPy package for tomographic reconstruction. TomocuPy utilizes modern hardware capabilities to organize a 3D asynchronous reconstruction involving parallel read/write operations with storage drives, CPU–GPU data transfers, and GPU computations. In the asynchronous reconstruction, all the operations are timely overlapped to almost fully hide all data management time. Since most cameras work with less than 16-bit digital output, the memory usage and processing speed are furthermore optimized by using 16-bit floating-point arithmetic. As a result, 3D reconstruction with TomocuPy became 20–30 times faster than its multi-threaded CPU equivalent. Full reconstruction (including read/write operations and methods initialization) of a 2048 3 tomographic volume takes less than 7 s on a single Nvidia Tesla A100 and PCIe 4.0 NVMe SSD, and scales almost linearly increasing the data size. To simplify operation at synchrotron beamlines, TomocuPy provides an easy-to-use command-line interface. Efficacy of the package was demonstrated during a tomographic experiment on gas-hydrate formation in porous samples, where a steering option was implemented as a lens-changing mechanism for zooming to regions of interest.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Accelerating DCA++ (Dynamical Cluster Approximation) Scientific Application on the Summit supercomputer

Optimizing scientific applications on today’s accelerator-based high performance computing systems can be challenging, especially when multiple GPUs and CPUs with heterogeneous memories and persistent non-volatile memories are present. An example is Summit, an accelerator-based system at the Oak Ridge Leadership Computing Facility (OLCF) that is rated as the world’s fastest supercomputer to-date. New strategies are thus needed to expose the parallelism in legacy applications, while being amenable to efficient mapping to the underlying architecture.In this paper we discuss our experiences and strategies to port a scientific application, DCA++, to Summit. DCA++ is a highperformance research application that solves quantum manybody problems with a cutting edge quantum cluster algorithm, the dynamical cluster approximation.Our strategies aim to synergize the strengths of the different programming models in the code. These include: (a) streamlining the interactions between the CPU threads and the GPUs, (b) implementing computing kernels on the GPUs and decreasing CPU-GPU memory transfers, (c) allowing asynchronous GPU communications, and (d) increasing compute intensity by combining linear algebraic operations.Full-scale production runs using all 4600 Summit nodes attained a peak performance of 73.5 PFLOPS with a mixed precision implementation.We observed a perfect strong and weak scaling for the quantum Monte Carlo solver in DCA++, while encountering about 2× input/output (I/O) and MPI communication overhead on the time-to-solution for the full machine run. Our hardware agnostic optimizations are designed to alleviate the communication and I/O challenges observed, while improving the compute intensity and obtaining optimal performance on a complex, hybrid architecture like Summit.

Balduzzi, Giovanni↗
NASA NTRS1993

Integrating end-to-end threads of control into object-oriented analysis and design

Current object-oriented analysis and design methodologies fall short in their use of mechanisms for identifying threads of control for the system being developed. The scenarios which typically describe a system are more global than looking at the individual objects and representing their behavior. Unlike conventional methodologies that use data flow and process-dependency diagrams, object-oriented methodologies do not provide a model for representing these global threads end-to-end. Tracing through threads of control is key to ensuring that a system is complete and timing constraints are addressed. The existence of multiple threads of control in a system necessitates a partitioning of the system into processes. This paper describes the application and representation of end-to-end threads of control to the object-oriented analysis and design process using object-oriented constructs. The issue of representation is viewed as a grouping problem, that is, how to group classes/objects at a higher level of abstraction so that the system may be viewed as a whole with both classes/objects and their associated dynamic behavior. Existing object-oriented development methodology techniques are extended by adding design-level constructs termed logical composite classes and process composite classes. Logical composite classes are design-level classes which group classes/objects both logically and by thread of control information. Process composite classes further refine the logical composite class groupings by using process partitioning criteria to produce optimum concurrent execution results. The goal of these design-level constructs is to ultimately provide the basis for a mechanism that can support the creation of process composite classes in an automated way. Using an automated mechanism makes it easier to partition a system into concurrently executing elements that can be run in parallel on multiple processors.

Mccandlish, Janet E.↗
DOE OSTI2023

Fast correlation function calculator: A high-performance pair-counting toolkit

A novel high-performance exact pair-counting toolkit called fast correlation function calculator (FCFC) is presented. With the rapid growth of modern cosmological datasets, the evaluation of correlation functions with observational and simulation catalogues has become a challenge. High-efficiency pair-counting codes are thus in great demand. We introduce different data structures and algorithms that can be used for pair-counting problems, and perform comprehensive benchmarks to identify the most efficient algorithms for real-world cosmological applications. We then describe the three levels of parallelisms used by FCFC, SIMD, OpenMP, and MPI, and run extensive tests to investigate the scalabilities. Finally, we compare the efficiency of FCFC with alternative pair-counting codes. The data structures and histogram update algorithms implemented in FCFC are shown to outperform alternative methods. FCFC does not benefit greatly from SIMD because the bottleneck of our histogram update algorithm is mainly cache latency. Nevertheless, the efficiency of FCFC scales well with the numbers of OpenMP threads and MPI processes, even though speedups may be degraded with over a few thousand threads in total. FCFC is found to be faster than most (if not all) other public pair-counting codes for modern cosmological pair-counting applications.

79 ASTRONOMY AND ASTROPHYSICS↗