Search NASA⌕ Search

SEARCH · Search NASA

Results for “Active Controls”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Reliability issues in active control of large flexible space structures

Efforts in this reporting period were centered on four research tasks: design of failure detection filters for robust performance in the presence of modeling errors, design of generalized parity relations for robust performance in the presence of modeling errors, design of failure sensitive observers using the geometric system theory of Wonham, and computational techniques for evaluation of the performance of control systems with fault tolerance and redundancy management

Vandervelde, W. E.↗
NASA NTRS1984

Development of an advanced pitch active control system for a wide body jet aircraft

An advanced PACS control law was developed for a commercial wide-body transport (Lockheed L-1011) by using modern control theory. Validity of the control law was demonstrated by piloted flight simulation tests on the NASA Langley visual motion simulator. The PACS design objective was to develop a PACS that would provide good flying qualities to negative 10 percent static stability margins that were equivalent to those of the baseline aircraft at a 15 percent static stability margin which is normal for the L-1011. Also, the PACS was to compensate for high-Mach/high-g instabilities that degrade flying qualities during upset recoveries and maneuvers. The piloted flight simulation tests showed that the PACS met the design objectives. The simulation demonstrated good flying qualities to negative 20 percent static stability margins for hold, cruise and high-speed flight conditions. Analysis and wind tunnel tests performed on other Lockheed programs indicate that the PACS could be used on an advanced transport configuration to provide a 4 percent fuel savings which results from reduced trim drag by flying at negative static stability margins.

Guinn, Wiley A.↗
NASA NTRS1986

Kinematic observers for active control of helicopter rotor vibration

A simple scheme for estimating the state variables of a helicopter rotor is presented. The method incorporates the use of blade-mounted accelerometers and/or position transducers to reconstruct modal displacements and velocities. The design of the observer structure and feedback gains is simplified by the fact that the method requires only knowledge of basic kinematic relationships between the various modal quantities. The observer structure described is particularly well-suited to control problems where the use of a traditional Kalman Filter approach would be too complex or costly. The technique can be viewed as decreasing the requirements on observer complexity while increasing the need for an enhanced sensor complement.

Mckillip, Robert M., Jr.↗
NASA NTRS1987

Digital robust active control law synthesis for large order systems using constrained optimization

This paper presents a direct digital control law synthesis procedure for a large order, sampled data, linear feedback system using constrained optimization techniques to meet multiple design requirements. A linear quadratic Gaussian type cost function is minimized while satisfying a set of constraints on the design loads and responses. General expressions for gradients of the cost function and constraints, with respect to the digital control law design variables are derived analytically and computed by solving a set of discrete Liapunov equations. The designer can choose the structure of the control law and the design variables, hence a stable classical control law as well as an estimator-based full or reduced order control law can be used as an initial starting point. Selected design responses can be treated as constraints instead of lumping them into the cost function. This feature can be used to modify a control law, to meet individual root mean square response limitations as well as minimum single value restrictions. Low order, robust digital control laws were synthesized for gust load alleviation of a flexible remotely piloted drone aircraft.

Mukhopadhyay, Vivek↗
NASA NTRS1987

Active control of flexural vibrations in beams

The feasibility of using piezoelectric actuators to control the flexural oscillations of large structures in space is investigated. Flexural oscillations are excited by impulsive loads. The vibratory response can degrade the pointing accuracy of cameras and antennae, and can cause high stresses at structural node points. Piezoelectric actuators have the advantage of exerting localized bending moments. In this way, vibration is controlled without exciting rigid body modes. The actuators are used in collocated sensor/driver pairs to form a feedback control system. The sensor produces a voltage that is proportional to the dynamic stress at the sensor location, and the driver produces a force that is proportional to the voltage applied to it. The analog control system amplifies and phase shifts the sensor signal to produce the voltage signal that is applied to the driver. The feedback control is demonstrated to increase the first mode damping in a cantilever beam by up to 100 percent, depending on the amplifier gain. The damping efficiency of the control system when the piezoelectrics are not optimally positioned at points of high stress in the beam is evaluated.

Gerhold, Carl H.↗
NASA NTRS1988

Multi-body aircraft with an all-movable center fuselage actively controlling fuselage pressure drag

A multi-body aircraft with an all-movable center fuselage which translates relative to two side fuselages is described. At subsonic and transonic flight the center fuselage is in a forward position. At supersonic speeds the center fuselage moves aft so as to ensure optimum aerodynamic interference at particular Mach numbers. This provides an increased shock strength and greater surface areas so the significant reductions in zero-lift wave drag can be achieved. This concept allows for a significant increase in the wing aspect ratio which would improve high-lift performance at all speeds without incurring a significant supersonic zero-lift wave drag penalty. In addition to an improved low-fineness ratio, high-speed performance is achieved at all speeds and for all flight conditions.

Wood, Richard M.↗
NASA NTRS1988

Active control of transient rotordynamic vibration by optimal control methods

Although considerable effort has been put into the study of steady state vibration control, there are few methods applicable to transient vibration control of rotorbearing systems. In this paper optimal control theory has been adopted to minimize rotor vibration due to sudden imbalance, e.g., blade loss. The system gain matrix is obtained by choosing the weighting matrices and solving the Riccati equation. Control forces are applied to the system via a feedback loop. A seven mass rotor system is simulated for illustration. A relationship between the number of sensors and the number of modes used in the optimal control model is investigated. Comparisons of responses are made for various configurations of modes, sensors, and actuators. Furthermore, spillover effect is examined by comparing results from collocated and noncollocated sensor configurations. Results show that shaft vibration is significantly attenuated in the closed loop system.

Palazzolo, A. B.↗
NASA NTRS1989

An integrated approach to the optimum design of actively controlled composite wings

The importance of interactions among the various disciplines in airplane wing design has been recognized for quite some time. With the introduction of high gain, high authority control systems and the design of thin, flexible, lightweight composite wings, the integrated treatment of control systems, flight mechanics and dynamic aeroelasticity became a necessity. A research program is underway now aimed at extending structural synthesis concepts and methods to the integrated synthesis of lifting surfaces, spanning the disciplines of structures, aerodynamics and control for both analysis and design. Mathematical modeling techniques are carefully selected to be accurate enough for preliminary design purposes of the complicated, built-up lifting surfaces of real aircraft with their multiple design criteria and tight constraints. The presentation opens with some observations on the multidisciplinary nature of wing design. A brief review of some available state of the art practical wing optimization programs and a brief review of current research effort in the field serve to illuminate the motivation and support the direction taken in our research. The goals of this research effort are presented, followed by a description of the analysis and behavior sensitivity techniques used. The presentation concludes with a status report and some forecast of upcoming progress.

Livne, E.↗
NASA NTRS1988

Digital robust active control law synthesis for large order flexible structure using parameter optimization

A generic procedure for the parameter optimization of a digital control law for a large-order flexible flight vehicle or large space structure modeled as a sampled data system is presented. A linear quadratic Guassian type cost function was minimized, while satisfying a set of constraints on the steady-state rms values of selected design responses, using a constrained optimization technique to meet multiple design requirements. Analytical expressions for the gradients of the cost function and the design constraints on mean square responses with respect to the control law design variables are presented.

Mukhopadhyay, V.↗
NASA NTRS1988

Performance of an active control system with piezoelectric actuators

Piezoelectric actuators are used to control the structural vibrations of flexible beams, and a modified independent modal space control method is employed to select the optimal location, control gains, and excitation voltage of the piezoelectric actuators. The method minimizes both the vibration amplitudes of the beams to which these actuators are bonded and the input control effort needed to suppress these vibrations. The effects of the actuators and the bonding layers on the elastic and inertial properties of the composite flexible beams is taken into account.

Baz, A.↗
NASA NTRS1988

Design of a simple active controller to suppress helicopter air resonance

A coupled rotor/fuselage helicopter analysis with the important effects of blade torsional flexibility, unsteady aerodynamics, and forward flight is presented. Using this mathematical model, a nominal configuration is selected that experiences an air resonance instability throughout most of its flight envelope. A simple multivariable compensator using conventional swashplate inputs and a single body roll rate measurement is then designed. The controller design is based on a linear estimator in conjunction with optimal feedback gains, and the design is done in the frequency domain using the Loop Transfer Recovery method. The controller is shown to suppress the air resonance instability throughout wide range helicopter loading conditions and forward flight speeds.

Takahashi, M. D.↗
NASA NTRS1989

On the active control of wall-bounded turbulent flows

The direct numerical simulation technique is used to explore concepts for manipulation of turbulent boundary layers. Significant drag reduction was achieved when at each instant the normal component of velocity at the wall was prescribed to be 180 deg out of phase with the normal velocity slightly above the wall. The drag reduction is accompanied with significant reduction in the intensity of the wall-layer structures and reductions in the magnitude of Reynolds stresses throughout the flow. Suitability of wall pressure and shear stress fluctuations for detection of flow structures above the wall are examined.

Moin, P.↗
NASA NTRS1989

Active control of flexural vibrations in beams

An analytical model of the feedback control system which estimates the voltage generated by the piezoelectric sensor as a function of the dynamic stress at the sensor location and the force exerted by the driver piezoelectric as a function of signal gain is developed. The analytical results are compared to measured results for a cantilever beam excited to vibrate in its first natural mode. The estimated increase in the first mode damping factor is in good agreement with the measured results.

Gerhold, Carl H.↗
NASA NTRS1989

A survey of experiments and experimental facilities for active control of flexible structures

A brief survey of large space structure control related experiments and facilities was presented. This survey covered experiments performed before and up to 1982, and those of the present period (1982-...). Finally, the future planned experiments and facilities in support of the control-structure interaction (CSI) program were reported. It was stated that new, improved ground test facilities are needed to verify the new CSI design techniques that will allow future space structures to perform planned NASA missions.

Sparks, Dean W., Jr.↗
NASA NTRS1989

A simple active controller to suppress helicopter air resonance in hover and forward flight

A coupled rotor/fuselage helicopter analysis with the important effects of blade torsional flexibility, unsteady aerodynamics, and forward flight is presented. This model is used to illustrate the effect of unsteady aerodynamics, forward flight, and torsional flexibility on air resonance. Next, a nominal configuration, which experiences air resonance in forward flight, is selected. A simple multivariable compensator using conventional swashplate inputs and a single body roll rate measurement is then designed. The controller design is based on a linear estimator in conjunction with optimal feedback gains, and the design is done in the frequency domain using the loop-transfer recovery method. The controller is shown to suppress the air resonance instability throughout wide range helicopter loading conditions and forward flight speeds.

Friedmann, P. P.↗