Search NASA⌕ Search

SEARCH · Search NASA

Results for “Angular dependence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Birefringent Color Filter by Layered Metal‐Organic Chalcogenides: In‐Plane Anisotropy and Odd/Even Effect

Anisotropic 2D materials are gaining interest recently as building blocks for angular‐dependent optical/electrical devices. However, the fundamental understanding of their structure‐property‐relationship is limited, which hinders further modulation of their unique characteristics via structure tailoring. Here the in‐plane structural anisotropy and the tunable optical/electrical properties of a series of radiation‐sensitive (X‐ray, e‐beam) metal‐organic chalcogenide (MOC) single crystals are comprehensively revealed with ligands of variable length/parity. Their monoclinic crystallography is determined at atomic resolution by a simple method that couples X‐ray/electron diffraction with first‐principles calculations. The in‐plane inorganic backbone of the MOCs exhibits a strong lattice anisotropy with odd/even alternations, which originates from that of the out‐of‐plane organic motifs via organic/inorganic accommodation. Such structural anisotropy is implied mechanically by the preferred orientation of crystal cleavage. It triggers a maximum ≈8 × distinction of in‐plane electrical conductivity of the semiconducting MOCs, plus a distinct birefringence (maximum Δn ≈ 0.03) with a dispersive orientation of dielectric axes, which rotate up to 25.7° from UV to visible‐light regime, inspiring an emerging pathway for color filtering via single crystal rotation. Such in‐plane optical characteristics also exhibit odd/even alternation and can be flexibly tuned by the designable out‐of‐plane ligands.

birefringence↗

On the Origin of the Large Remanent Polarization in La:HfO 2

We report that the outstanding remanent polarization of 40 µC cm –2 reported for a 10 nm thin La:HfO 2 film in 2013 has attracted much attention. However, up to now, no explanation for this large remanent polarization has been presented. Density functional theory and X-ray diffraction are used to shine light onto three major aspects that impact the macroscopically observed remanent polarization: phase fraction, spontaneous polarization, and crystallographic texture. Density functional theory calculations show that the spontaneous polarization (P s ) of La:HfO 2 is indeed a bit larger than for other HfO 2 -or ZrO 2 -based compounds; however, the P s is not large enough to explain the observed differences in remanent polarization. While neither phase fractions nor spontaneous polarization nor strain are significantly different from those in other HfO 2 films, a prominent 020/002 texture distinguishes La doped from other HfO 2 -based ferroelectric films. Angular-dependent diffraction data provide a pathway to calculate the theoretically expected remanent polarization, which is in agreement with the experimental observations. Finally, an interplay of the in-plane strain and texture is proposed to impact the formation of the ferroelectric phase during annealing. Lastly, further aspects of the special role of La as a dopant are collected and discussed to motivate future research.

36 MATERIALS SCIENCE↗

Magnetoresistance in relativistic hydrodynamics without anomalies

We present expressions for the magnetoconductivity and the magnetoresistance of a strongly interacting metal in 3 + 1 dimensions, derivable from relativistic hydrodynamics. Such an approach is suitable for ultraclean metals with emergent Lorentz invariance. When this relativistic fluid contains chiral anomalies, it is known to exhibit longitudinal negative magnetoresistance. We show that similar effects can arise in non-anomalous relativistic fluids due to the distinctive gradient expansion. In contrast with a Galilean-invariant fluid, the resistivity tensor of a dirty relativistic fluid exhibits similar angular dependence to negative magnetoresistance, even when the constitutive relations and momentum relaxation rate are isotropic. We further account for the effect of magnetic field-dependent corrections to the gradient expansion and the effects of long-wavelength impurities on magnetoresistance. We note that the holographic D3/D7 system exhibits negative magnetoresistance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Functional determinants of radial operators in AdS 2

We study the zeta-function regularization of functional determinants of Laplace and Dirac-type operators in two-dimensional Euclidean AdS 2 space. More specifically, we consider the ratio of determinants between an operator in the presence of background fields with circular symmetry and the free operator in which the background fields are absent. By Fourier-transforming the angular dependence, one obtains an infinite number of one-dimensional radial operators, the determinants of which are easy to compute. The summation over modes is then treated with care so as to guarantee that the result coincides with the two-dimensional zeta-function formalism. The method relies on some well-known techniques to compute functional determinants using contour integrals and the construction of the Jost function from scattering theory. Here, our work generalizes some known results in flat space. The extension to conformal AdS 2 geometries is also considered. We provide two examples, one bosonic and one fermionic, borrowed from the spectrum of fluctuations of the holographic 1/4-BPS latitude Wilson loop.

Wilson↗

Electroweak logarithms in inclusive cross sections

We expand the framework to perform all-orders resummation of electroweak logarithms of Q/M for inclusive scattering processes at energies Q much above the electroweak scale M . We determine all ingredients needed at next-to-leading logarithmic (NLL) order and provide an explicit recipe to implement this for 2 → 2 processes. PDF evolution including electroweak corrections, which lead to Sudakov double logarithms, is computed. If only the invariant mass of the final state is measured, all electroweak logarithms can be resummed by the PDF evolution, at least to LL. However, simply identifying a lepton in the final state requires the corresponding fragmentation function and introduces angular dependence through the exchange of soft gauge bosons. Furthermore, we show the importance of polarization effects for gauge bosons, due to the chiral nature of SU(2) — even the gluon distribution in an unpolarized proton becomes polarized at high scales due to electroweak effects. We justify our approach with a factorization analysis, finding that the objects entering the factorization theorem do not need to be SU(2) × U(1) gauge singlets, even though we perform the factorization and resummation in the symmetric phase. We also discuss a range of extensions, including jets and how to calculate the EW logarithms when you are fully exclusive in the central (detector) region and fully inclusive in the forward (beam) regions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Scattering amplitudes for monopoles: pairwise little group and pairwise helicity

On-shell methods are particularly suited for exploring the scattering of electrically and magnetically charged objects, for which there is no local and Lorentz invariant Lagrangian description. In this paper we show how to construct a Lorentz-invariant S-matrix for the scattering of electrically and magnetically charged particles, without ever having to refer to a Dirac string. A key ingredient is a revision of our fundamental understanding of multi-particle representations of the Poincaré group. Surprisingly, the asymptotic states for electric-magnetic scattering transform with an additional little group phase, associated with pairs of electrically and magnetically charged particles. The corresponding “pairwise helicity” is identified with the quantized “cross product” of charges, e 1 g 2 - e 2 g 1 , for every charge-monopole pair, and represents the extra angular momentum stored in the asymptotic electromagnetic field. We define a new kind of pairwise spinor-helicity variable, which serves as an additional building block for electric-magnetic scattering amplitudes. We then construct the most general 3-point S-matrix elements, as well as the full partial wave decomposition for the 2 → 2 fermion-monopole S-matrix. In particular, we derive the famous helicity flip in the lowest partial wave as a simple consequence of a generalized spin-helicity selection rule, as well as the full angular dependence for the higher partial waves. Our construction provides a significant new achievement for the on-shell program, succeeding where the Lagrangian description has so far failed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-field magnetization study of [Cu(pyz){sub 2} (HF{sub 2})]PF{sub 6} : an s = 1/2 quasi-two-dimensional Heisenberg magnet.

We report on pulsed-field magnetization studies of the quasi-two-dimensional spin system [Cu(pyz){sub 2}(HF{sub 2})]PF{sub 6}. The magnetization saturates at B{sub C}{sup ab} = 37.5 T and B{sub C}{sup c} = 33.8 T for in-plane and out-of-plane orientations of the applied magnetic field, respectively. In addition, the angular dependence of the g-factor studied by electron-spin resonance reveals orbital overlap in the ab plane suggesting a quasi-two-dimensional square-lattice network of Cu spins. It is argued that the high-field behavior is governed by the two-dimensional nature of the spin correlations due to the large anisotropy of the exchange couplings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polarization of Nucleons in the Deuteron Stripping Reaction on Nuclei

A general analytical expression has been obtained in the diffraction approximation for the polarization of nucleons arising in the deuteron stripping reaction on nuclei at intermediate energies of the incident particles. A tabulated density distribution of the target nucleus and a realistic wave function of the deuteron with correct asymptotic limits at large internucleon distances were used in the calculations. The nucleon-nucleus phase shifts were calculated in the Glauber formalism using the double folding potential. The calculated angular dependences for the vector analyzing power Ay of the reaction {sup 3}He(d, p){sup 4}He are found to be in satisfactory agreement with the corresponding experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evolution of dislocation loops in irradiated α-Uranium: An atomistically-informed cluster dynamics investigation

An atomistically-informed mean field cluster dynamics model has been developed to investigate the nucleation and growth of prismatic loops in irradiated a-Uranium. TEM analysis of neutron irradiated a-Uranium shows the evolution of self-interstitial atom and vacancy loops on (010) and (100) crystallographic planes, respectively, resulting in an anisotropic lattice swelling of its face-centered orthorhombic crystal. To provide model parameters, the crystallography of loops and the binding energy of point defects to these loops were studied using an angular dependent EAM potential and classical molecular dynamics (MD) simulations. Furthermore, using the bond-boost hyperdynamics method, the anisotropic diffusion of interstitials and vacancies in a-Uranium was investigated. Here, the mechanisms of point defect diffusion and the associated migration energies were reported and compared with previous DFT studies. The energetics and kinetic quantities mentioned above were used in the cluster dynamics model to predict the cluster density as a function of dose rate, dose and temperature and the results were compared to the reported neutron irradiation experiments. The model predictions reveal an accumulation of small sized vacancy loops along with a population of large and growing self-interstitial loops, which closely corresponds to the TEM observations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Quantum oscillation studies of the nodal line semimetal Ni 3 In 2 S 2-x Se x

Ternary shandite compounds with the general formula T 3 M 2 X 2 (T = Ni, Co, Rh or Pd; M = Sn, In, or Pb; and X = S or Se) have emerged as a large pool of topological semimetals. This family of compounds hosts different topological phases for various combinations of T, M and X. This paper reports the observation of quantum oscillations under the high magnetic fields in Ni 3 In 2 S 2-x Se x single crystals. Angular dependence of oscillation frequency suggests an evolution of the Fermi surface from three-dimensional to two-dimensional on Se substitution for S in Ni 3 In 2 S 2 . Here, the effective mass obtained for each composition by fitting the oscillation amplitude with the Lifshitz-Kosevich formula, shows no significant change, suggesting that the topological phase might be relatively robust against enhanced spin-orbit coupling upon Se doping in Ni 3 In 2 S 2 .

36 MATERIALS SCIENCE↗

Dry cask radiation shielding validation and estimation of cask surface dose rate with MAVRIC during long-term storage

The dry storage cask became a semi-permanent solution for spent nuclear fuel since no permanent solution has been finalized over the past three decades. Considering the difficulty of deep geological repository projects in many aspects, prolonging the service life of dry casks longer than a few decades has become an option for spent nuclear fuel storage. It must be ensured that dry cask safety objectives, including radiation shielding, criticality safety, structure health, decay heat removal, and containment be fulfilled during the prolonged service life. This paper presents numerical modeling results of the radiation dose rate distribution on a TN-32 cask surface aged up to 300 years. The numerical modeling method was validated with measurement data, and the difference between the calculated results and measurement data in the total dose rate is 7%. The detailed radiation distribution variations over cask surfaces along the axial and radial directions for 300 years of storage were obtained, and their azimuthal angular dependence was established. The maximum total dose rate over the cask surfaces is less than 10 mrem/hour (9.258 ± 0.212 mrem/hour) after 40 years, and this outcome fulfills all dose rate requirements from 10 CFR 71.47(b). After 300 years of storage, the average total dose rates on the side surface and top surface are 0.150 ± 0.007mremmrem/hour and 0.057 ± 0.003mremmrem/hour, respectively, while the maxima are 0.601 ± 0.014 mrem/hour and 0.112 ± 0.006 mrem/hour, respectively. The variations in the fuel gamma ray, structure gamma ray, neutron and secondary gamma-ray contributions to the total dose rate are presented and analyzed in this work. The neutron and gamma-ray dose rate contributions by energy group are presented and analyzed at the cask top, mid-plane, and bottom at the selected storage times.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Microstructure and magnetic properties of (001) textured L1(0) FePt films on amorphous glass substrate

L1(0) FePt thin films with an island-like morphology and magnetic perpendicular anisotropy were grown at low temperature (300 < T-dep< 375 degrees C) by magnetron sputtering on Hoya glass substrates using a 30-nm thick Cr (2 0 0) underlayer. An MgO buffer layer with a thickness of 2 nm was used to inhibit the diffusion from the Cr underlayer and promote the growth of (0 0 1) oriented L1(0) FePt films by inducing an in-plane lattice distortion. By varying the substrate temperature and the Ar sputter pressure (3.5 < P-Ar< 15 mTorr) during the deposition, the degree of chemical order, the microstructure and the magnetic properties were tuned and the best properties in term of squareness ratio (M-r/M-s similar to 0.95) and coercive field (H-c similar to 14 kOe) were observed for films deposited at T-dep = 350 degrees C and P-Ar= 5 mTorr, due to the appearance of a tensile strain, which favors the perpendicular anisotropy. The analysis of the angular dependence of remanent magnetization curves on the optimized sample suggests that the magnetization reversal is highly incoherent due to the inter-island interactions. Our results provide useful information on the low temperature growth of FePt films with perpendicular anisotropy onto glass substrates, which are relevant for a variety of technological applications, such as magnetic recording and spintronic devices. (C) 2015 Elsevier B.V. All rights reserved.

Speliotis, T↗

Statistical evaluation of microscale stress conditions leading to void nucleation in the weak shock regime

Here, we investigate the heterogeneity of the stress state driven by anisotropic deformation response at the single crystal level through five statistical volume element (SVE) calculations of polycrystalline BCC tantalum. This work focuses on grain boundaries as a prominent material defect type prone to void nucleation based upon experimental observations of predominantly intergranular void nucleation in this material. The SVEs are constructed to be statistically representative of larger volumes of material and are meshed such that mean and standard deviation of grain size and orientation information is reconstructed. The computational meshes feature hexahedral (brick) elements and smooth conformal grain boundaries where significant stress concentration is known to occur, a tail effect of interest in the extreme events process of dynamic ductile damage. An existing micromechanical crystallographic plasticity model shown to capture the single crystal behavior of BCC tantalum well is used to perform the polycrystal calculations. The model includes representation of the non-Schmid effect of non-planar screw dislocation kinetics in tantalum. A three-dimensional stress state time profile predicted by damage modeling of a flyer plate impact experiment is applied as boundary conditions to each SVE. Resulting grain boundary stress state statistics are strongly non-Gaussian. Significant structural evolution is observed within the compressive hold before unloading into tension in the stress profile. Strong angular dependence of grain boundary traction magnitude with shock direction is observed. Non-Schmid effects continue to suggest their influence on propensity of microstructural defect types to nucleate voids. A general void nucleation criterion is proposed using probability theory. The general framework is specified to polycrystalline BCC tantalum in the weak shock regime to include the SVE calculations and literature molecular dynamics calculations of grain boundary void nucleation strength. Probability density functions (PDFs) are used to describe the interaction between the local stress state heterogeneity and the distributed grain boundary void nucleation strength state. A causation entropy maximization procedure removes the requirement for ad hoc selection of a PDF functional form and provides a rigorous procedure for data-based PDF determination. The resulting physically informed PDF describes the spatial appearance frequency of nucleated voids as a function of applied macroscale pressure. Lower length scale physics are thus packaged in a precise and computationally efficient way to provide computational plasticity insight to macroscale dynamic ductile damage models.

36 MATERIALS SCIENCE↗

Volumetric-Modulated Arc Therapy: Effective and Efficient End-to-End Patient-Specific Quality Assurance

Purpose: To explore an effective and efficient end-to-end patient-specific quality-assurance (QA) protocol for volumetric modulated arc radiotherapy (VMAT) and to evaluate the suitability of a stationary radiotherapy QA device (two-dimensional [2D] ion chamber array) for VMAT QA. Methods and Materials: Three methods were used to analyze 39 VMAT treatment plans for brain, spine, and prostate: ion chamber (one-dimensional absolute, n = 39), film (2D relative, coronal/sagittal, n = 8), and 2D ion chamber array (ICA, 2D absolute, coronal/sagittal, n = 39) measurements. All measurements were compared with the treatment planning system dose calculation either via gamma analysis (3%, 3- to 4-mm distance-to-agreement criteria) or absolute point dose comparison. The film and ion chamber results were similarly compared with the ICA measurements. Results: Absolute point dose measurements agreed well with treatment planning system computed doses (ion chamber: median deviation, 1.2%, range, -0.6% to 3.3%; ICA: median deviation, 0.6%, range, -1.8% to 2.9%). The relative 2D dose measurements also showed good agreement with computed doses (>93% of pixels in all films passing gamma, >90% of pixels in all ICA measurements passing gamma). The ICA relative dose results were highly similar to those of film (>90% of pixels passing gamma). The coronal and sagittal ICA measurements were statistically indistinguishable by the paired t test with a hypothesized mean difference of 0.1%. The ion chamber and ICA absolute dose measurements showed a similar trend but had disparities of 2-3% in 18% of plans. Conclusions: After validating the new VMAT implementation with ion chamber, film, and ICA, we were able to maintain an effective yet efficient patient-specific VMAT QA protocol by reducing from five (ion chamber, film, and ICA) to two measurements (ion chamber and single ICA) per plan. The ICA (Matrixx Registered-Sign , IBA Dosimetry) was validated for VMAT QA, but ion chamber measurements are recommended for absolute dose comparison until future developments correct the ICA angular dependence.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A computational method for the Helmholtz equation in unbounded domains based on the minimization of an integral functional

We study a new approach to the problem of transparent boundary conditions for the Helmholtz equation in unbounded domains. Our approach is based on the minimization of an integral functional arising from a volume integral formulation of the radiation condition. The index of refraction does not need to be constant at infinity and may have some angular dependency as well as perturbations. We prove analytical results on the convergence of the approximate solution. Numerical examples for different shapes of the artificial boundary and for non-constant indexes of refraction will be presented.

97 MATHEMATICS AND COMPUTING↗

A linked-scale coupled model of mass erosion and redistribution in plasma-exposed micro-foam surfaces

Surface evolution due to exposure to harsh environments is of importance in many scientific and technological applications. In plasma-exposed materials, the surface receives charged particles from the plasma, leading to a series of processes that drive the system far from equilibrium and may lead to the severe deterioration of the surface properties. Although surface morphological changes are driven by atomic collisions taking place over picoseconds and nanometers, these processes result in mass loss and redistribution of matter over much larger length and time scales. This necessitates a multi-scale approach capable of capturing the range of processes linking primary atomic collision events with engineering-level surface geometry changes. In this paper, we develop a computational model to simulate the morphological evolution and effective erosion rate of micro-architected tungsten foams during low-energy plasma ion bombardment. Furthermore, the model acts on several length scales, with the energy and angular dependence of the sputtering yield of flat tungsten surfaces determined using the SRIM code based on the binary collision approximation. This information is introduced into a low-fluence, short-term Monte Carlo raytracing model, and further into a high-fluence, long-term particle transport model. In the latter, material particles representing billions of atoms are described in a digitized 3-D representation of the foam structure from X-ray tomography data, and are sputtered off and redeposited using the atomistic information. We show that the redeposition of sputtered atoms leads to partial self-healing in the bottom layers with a sharp reduction in the sputtering coefficient of low density foams, roughly 25% of the solid W value. This is in qualitative agreement with recent experiments on low porosity W structures. At high fluence, the foam structure degrades considerably as there are fewer ligaments available to recapture sputtered atoms and, consequently, the sputtering rate increases again.

36 MATERIALS SCIENCE↗

Assessment of uranium nitride interatomic potentials

Uranium mononitride (UN) is a promising nuclear fuel due to its high fissile density, high thermal conductivity, and suitability for reprocessing. In this study, two uranium nitride interatomic potentials are assessed: Tseplyaev and Starikov's angular-dependent potential and Kocevski et al.'s embedded atom model potential. Predictions of the thermophysical and elastic properties of UN, UN 2 , and α- and β-U 2 N 3 computed using both potentials are assessed and compared to available experimental data. Notably, the Tseplyaev potential performs better with the energetic aspects of UN, e.g., specific heat capacity and point defect formation energies, whereas the Kocevski potential performs better with the structural aspects of UN, e.g., thermal expansion as well as with the elastic properties. The reasons why the Kocevski potential underestimates the UN specific heat are explained by examining the UN phonon properties modeled using both potentials. The Kocevski potential shows better identification of the mechanical stability ranges of UN, UN 2 , and α- and β-U 2 N 3 , reasonably predicting the melting point of UN and predicting stable structures for UN 2 and α- and β-U 2 N 3 . On the other hand, the Tseplyaev potential predicts a premature phase change of both UN and UN 2 and cannot stabilize α- nor β-U 2 N 3 . However, the Kocevski potential cannot predict a stable α-U phase and is thus not suitable for the calculation of formation energies for non-stoichiometric point defects.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Light induced magnetic properties of spiropyrane tris(oxalato)chromate (III) single crystals

The effect of UV light on Weiss temperature and ESR spectra in 1-isopropyl-3, 3, 5', 6'-tetramethylspiro[indolin-2,2'-[2H]pyrano[3,2-b]pyridinium] tris(oxalato)chromate (III) (Sp{sub 3}Cr(C{sub 2}O{sub 4}){sub 3}) has been found. Additional line has been observed in the ESR spectra of irradiated samples in 'strong' magnetic fields of {approx}15 kOe. The analysis of angular dependences of the ESR spectra allowed a contribution of Cr{sup 3+} ions to magnetic properties of Sp{sub 3}Cr(C{sub 2}O{sub 4}){sub 3} to be determined. The zero-field splitting parameters D=0.619 cm{sup -1}, E=0.024 cm{sup -1} were derived from the experimental data. The parameters were typical for Cr{sup 3+} in the chromium oxalate. Weiss temperature changed sign from 25 to -25 K under UV irradiation. The value of Weiss temperature and its changing cannot be explained by exchange interaction, dipole-dipole interaction or the effect of crystal field. The existence of Weiss temperature is explained by the changes in amount and spin of paramagnetic particles. The change is due to thermoactivated redistribution of electrons between chromium ions and spiropyrane molecules. Light-induced transfer of electrons is also explaining the change in sign of Weiss temperature under UV irradiation. - Graphical abstract: Fragment of crystal structure of (Sp{sub 3}Cr(C{sub 2}O{sub 4}){sub 3}). Temperature dependences of reciprocal molar magnetic moment of the sample at T=2 K: (1) before irradiation, and (2) after UV irradiation.

36 MATERIALS SCIENCE↗