Search NASA⌕ Search

SEARCH · Search NASA

Results for “Binding Energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Cross section measurements of deuteron electro-disintegration at very high recoil momenta and large 4-momentum transfers (Q^2)

The 2H(e,e'p)n cross sections have been measured at negative 4-momentum transfers of Q^2 = 4.5 +/- 0.5 (GeV/c)^2 and Q^2 = 3.5 +/- 0.5 (GeV/c)^2 reaching neutron recoil (missing) momenta up to p_r ?1.0 GeV/c. The data have been obtained at fixed neutron recoil angles 5 <= theta_nq <= 95 degrees with respect to the 3-momentum transfer q. The new data agree well with the previous data which reached p_r ?550 MeV/c. At theta_nq = 35 and 45 degrees, final state interactions (FSI), meson exchange currents (MEC) and isobar configurations (IC) are suppressed and the plane wave impulse approximation (PWIA) provides the dominant cross section contribution. The new data are compared to recent theoretical calculations, and a significant disagreement for recoil momenta p_r > 700 MeV/c is observed. The experiment was carried out in experimental Hall C at the Thomas Jefferson National Accelerator Facility (TJNAF) and formed part of a group of four experiments that were used to commission the new Super High Momentum Spectrometer (SHMS). The experiment consisted of a 10.6 GeV electron beam incident on a liquid deuterium target which resulted in the break-up of the deuteron into a proton and neutron. The scattered electrons were detected by the SHMS in coincidence with the knocked-out protons detected in the previously existing High Momentum Spectrometer (HMS) and the recoiling neutrons were reconstructed from energy-momentum conservation laws. To ensure that the 2H(e,e'p)n reaction channel was selected, we required the missing energy of the system to be the binding energy of the deuteron (?2.22 MeV). The spectrometers? central angles and momenta were set to measure three central missing momentum settings of the neutron corresponding to p_r = 80, 580 and 750 MeV/c, which required the SHMS central angle and momentum to be fixed and the HMS to be rotated from smaller to larger angles corresponding to the lower and higher missing momentum settings, respectively. The experiment was carried out in a time period of six days with typical electron beam currents of 45-60 uA at about 50% beam efficiency.

Yero, Carlos↗
NASA NTRS1973

Is nuclear matter a quantum crystal?

A possible alternative to the ordinary gas-like computation for nuclear matter is investigated under the assumption that the nucleons are arranged in a lattice. BCC, FCC and HCP structures are investigated. Only HCP shows a minimum in the energy vs. density curve with a modest binding energy of -1.5 MeV. The very low density limit is investigated and sensible results are obtained only if the tensor force decreases with the density. A study of the elastic properties indicates that the previous structures are mechanically unstable against shearing stresses.

Canuto, V.↗
NASA NTRS1993

Condensed-matter energetics from diatomic molecular spectra

Analyses of molecular spectra and compression data from crystals show that a single function successfully describes the dependence on interatomic separation of both the potential energy of diatomic molecules and the cohesive binding energy of condensed matter. The empirical finding that one function describes interatomic energies for such diverse forms of matter and over a wide range of conditions can be used to extend condensed-matter equations of state but warrants further theoretical study.

Kim, In H.↗
NASA NTRS1999

Major Optical Outburst of Two Blazars: 3C66A and OJ287

Differential CCD photometric observations of 3C66A and OJ287 were carried out on 16 and 35 nights between December 1995 and March 1996, at the Vainu Bappu Observatory, India, as part of the blazar monitoring program. During this period we detected major optical outbursts (brightness of 3C66A and OJ287 increased by 0.8 and 1 mag, respectively) of these two blazars on timescales of two months. Integrating the outburst profiles we find that both the blazars released around 10(exp 53) erg. Such large amount of energy may come from the release of binding energy of a compact star when tidally disrupted by a super-massive black hole at the center of these blazars. Also we extend this model to explain the observed multifrequency (radio through gamma-ray) outburst of these two blazars and show that this model will be able to explain the outburst phenomena of other blazars. These new results will be presented with a detailed discussion of the suggested model.

Ghosh, K. K.↗
NASA NTRS1998

Elemental Fractionation During Rapid Accretion of the Moon Triggered by a Giant Impact

Recently, Ida et al. made an N-body simulation of lunar accretion from a protolunar disk formed by a giant impact. One of their important conclusions is that the accretion time of the Moon is as short as one month. Such rapid accretion is a necessary consequence of the high surface density of a lunar mass disk accreting just beyond the Roche limit (about 3Re); the Safronov accretion time (a few days) is even shorter. The energy of accretion always exceeds the gravitational binding energy of newly arriving matter. Hence, without an energy sink, the accreting body is thermally unstable. For the Earth and other planets, radiation acts as the sink. However, in such a short accretion time, the Moon cannot radiate the accretional energy. Even radiating at a silicate cloudtop temperature of roughly 2000 K, it would take more than 100 yr to radiatively cool the Moon. The plausible alternative heat sinks are heat capacity, latent heat of vaporization, and thermal escape of the gas to space (i.e., hydrodynamic blowoff). The latter becomes plausible for the Moon because the scale height at 2000 K (about 300 km) is a significant fraction of the lunar radius. The early stages of lunar (or "lunatesimal") growth release relatively little energy and can occur simply by heating the material, especially if the accreting material is originally cold. However, the material is unlikely to be cold, because the disk itself is hot and cooling time is long, while the lunar accretion time iss very short. Therefore, the moon is likely to accrete condensed material just after it condenses. Accordingly, the newly accreted material will be on the verge of vaporization and will have very little heat capacity to spare. The immediate heat sink is the latent heat of vaporization. Most of the vapor will escape from the moon, because the thermal energy in the gas can be used to drive escape. However, vaporization is generally incomplete. the latent heat of vaporization exceeds the energy of accretion. Viewed globally, the accretional energy is about half the energy required to vaporize the entire Moon. Thus to first approximation, half of the Moon-forming material can be vaporized and lost during accretion. During this process, we would expect preferential loss of relatively volatile elements. Escape will retard the rate of accretion. To test these ideas, we computed detailed models of the thermal state of the Moon during accretion. We pay special attention to the structure of the silicate atmosphere and its loss rate by calculating the chemical species at equilibrium. We used the PHEQ program which includes 12 elements (H,O,C,Mg,Si,Fe,Ca, Al, Na,Ti, and N.) and 272 compounds (including ionic compounds). Because of the large heats of vaporization and ionization, the adiabatic atmosphere is nearly isothermal and massive escape is expected. The pressure of the atmosphere is determined by the balance between vaporization of a accreting material and escape. If the accretion time is one month, a 0.3 bar atmosphere is expected. Elemental fractionation depends strongly on the temperature of the accreting material. The initial temperature of the material can be estimated from the condition of gravitational instability in the protolunar disk. As shown by Ida et al, accretion starts when gravitational instability occurs when more than 99% of the material condenses. At this point, all of Ca, Al, Si, Mg, and Fe, and 95% of Na (probably K also), are in condensed phases. If the moon is formed from the accretion of such material, volatile elements such as Na, and K are retained by the moon only early in accretion. At later times, K and Na are lost and a fraction of the MG, Si and Fe is lost. However, refractory elements such as Ca and Al are retained and so achieve a mild degree (factor 2) of superabundance.

Abe, Y.↗
NASA NTRS2005

Calculating the X-Ray Fluorescence from the Planet Mercury Due to High-Energy Electrons

The least-studied terrestrial planet is Mercury due to its proximity to the Sun, which makes telescopic observations and spacecraft encounters difficult. Our lack of knowledge about Mercury should change in the near future due to the recent launching of MESSENGER, a Mercury orbiter. Another mission (BepiColombo) is currently being planned. The x-ray spectrometer on MESSENGER (and planned for BepiColombo) can characterize the elemental composition of a planetary surface by measuring emitted fluorescent x-rays. If electrons are ejected from an atom s inner shell by interaction with energetic particles such as photons, electrons, or ions, electrons from an outer shell can transfer to the inner shell. Characteristic x-rays are then emitted with energies that are the difference between the binding energy of the ion in its excited state and that of the ion in its ground state. Because each element has a unique set of energy levels, each element emits x-rays at a unique set of energies. Electrons and ions usually do not have the needed flux at high energies to cause significant x-ray fluorescence on most planetary bodies. This is not the case for Mercury where high-energy particles were detected during the Mariner 10 flybys. Mercury has an intrinsic magnetic field that deflects the solar wind, resulting in a bow shock in the solar wind and a magnetospheric cavity. Electrons and ions accelerated in the magnetosphere tend to follow its magnetic field lines and can impact the surface on Mercury s dark side Modeling has been done to determine if x-ray fluorescence resulting from the impact of high-energy electrons accelerated in Mercury's magnetosphere can be detected by MESSENGER. Our goal is to understand how much bulk chemical information can be obtained from x-ray fluorescence measurements on the dark side of Mercury.

Burbine, T. H.↗
DOE OSTI2021

Cumulative short-lived photofission product yields for nuclear forensic application

Experiments have long been carried out with linear accelerator (linac) produced bremsstrahlung X-rays to study high-energy photon-induced fission, known as “photofission”. One benefit of photofission, when compared with neutron-induced fission, is the ability to investigate fundamental physics of fission at excitation energies lower than what is possible with neutrons [1]. Absorption of an incident neutron results in a compound nucleus with an excitation energy at least equal to the neutron binding energy; thus, the lowest energy region of the fission barrier cannot be studied. Fission product yield distributions are dependent on the incident particle energy and the target nucleus mass. They are generally represented by a double-humped curve, with low and high mass “peaks” and an intermediate mass “valley”. As incident particle energy increases, the excitation energy of the nucleus increases, thereby increasing the overall yield of isotopes in the valley with respect to the two maxima or peaks of the fission product curve [3]. Photofission is most probable for incident photons around 14 MeV due to the giant dipole resonance. Induced photofission around this energy results in a fission product yield distribution that resembles 14 MeV DT neutron fission more than thermal or fast (500 keV) neutron fission. In post-detonation nuclear forensics, the peak-to-valley ratio of the fission product yield curve could be used for characterizing device type by providing an indication of the neutron energy spectrum that had induced fission (e.g., 500 keV vs. 14 MeV). The goal of this work is to improve nuclear data for isotopes of interest in nuclear forensics and special nuclear material (SNM) detection, specifically the fission product yield data via photofission experiments for the isotopes of 238U and 232Th. Photofission has been proposed as a less costly and more flexible production method for the valley isotopes that are representative of DT neutron fission product yield distributions, which would benefit nuclear forensics exercises in testing for analysis techniques. Natural uranium and thorium targets were irradiated with bremsstrahlung photons (nominal endpoint energies of 8, 14, and 20 MeV), generated via impingement of high-energy electrons on a tungsten electron-to-photon radiator. Gamma-ray spectroscopy was used to observe and identify the decay of the resulting fission products. The photofission yields of 102 fission products were measured for the set of the 238U and 232Th targets at the three bremsstrahlung X-ray endpoint energies 8, 14, and 20 MeV. These fragments included masses ranging from A=84 to A=144, with half-lives as short as 1.07 seconds.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Exciton–Polaritons in CsPbBr 3 Crystals Revealed by Optical Reflectivity in High Magnetic Fields and Two-Photon Spectroscopy

Cesium lead bromide (CsPbBr3) is a representative material of the emerging class of lead halide perovskite semiconductors that possess remarkable optoelectronic properties. Its optical properties in the vicinity of the bandgap energy are greatly contributed by excitons, which form exciton polaritons due to strong light–matter interactions. Exciton–polaritons in solution-grown CsPbBr 3 crystals are examined by means of circularly polarized reflection spectroscopy measured in high magnetic fields up to 60 T. The excited 2P exciton state is measured by two-photon absorption. Comprehensive modeling and analysis provides detailed quantitative information about the exciton–polariton parameters: exciton binding energy of 32.5 meV, oscillator strength characterized by longitudinal–transverse splitting of 5.3 meV, damping of 6.7 meV, reduced exciton mass of 0.18$m$ 0 , exciton diamagnetic shift of 1.6 μeV T -2 , and exciton Landé factor $g$ x = + 2.35. It is shown that the exciton states can be described within a hydrogen-like model with an effective dielectric constant of 8.7. From the measured exciton longitudinal–transverse splitting, Kane energy of E p = 15 eV is evaluated, which is in reasonable agreement with values of 11.8–12.5 eV derived from the carrier effective masses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Material Effects on Electron-Capture Decay in Cryogenic Sensors

Several current searches for physics beyond the standard model are based on measuring the electron-capture (EC) decay of radionuclides implanted into cryogenic high-resolution sensors. The sensitivity of these experiments has already reached the level where systematic effects related to atomic state energy changes from the host material are a limiting factor. One example is a neutrino mass study based on the nuclear EC decay of 7 Be to 7 Li inside cryogenic Ta-based sensors. Here, to understand the material effects at the required level, we use density-functional theory to model the electronic structure of lithium atoms in different atomic environments of the polycrystalline Ta absorber film. The calculations reveal that the Li 1s binding energies can vary by more than 2 eV due to insertion at different lattice sites, at grain boundaries, in disordered Ta, and in the vicinity of various impurities. However, the total range of Li 1s shifts does not exceed 4 eV, even for extreme amorphous disorder. Furthermore, when investigating the effects on the Li 2s levels, we find broadening of more than 5 eV due to hybridization with the Ta band structure. Material effects are shown to contribute significantly to peak broadening in Ta-based sensors that are used to search for physics beyond the standard model in the EC decay of 7 Be, but they do not explain the full extent of observed broadening. Understanding these in-medium effects will be required for current- and future-generation experiments that observe low-energy radiation from the EC decay of implanted isotopes to evaluate potential limitations on the measurement sensitivity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Exploring isospin symmetry breaking in exotic nuclei: High-precision mass measurement of 23 Si and shell-model calculations of 𝑇 = 5/2 nuclei

Here, we present a high-precision mass measurement of the proton-rich nucleus 23 Si, performed with the LEBIT Penning trap at the Facility for Rare Isotope Beams (FRIB) utilizing the time-of-flight ion cyclotron resonance (TOF-ICR) technique. We determined a mass excess of 23362.9(5.8) keV, which agrees with a recent storage-ring measurement from the experimental Cooler-Storage Ring (CSRe) in Lanzhou but has a factor of 20 improved precision 23 Si is hence the nucleus with the most precisely known mass among all nuclei with an isospin projection of 𝑇 𝑧 = −5/2. We performed shell-model calculations with the USDC and USDCm Hamiltonians to study binding energy differences and Thomas-Ehrmann shifts in mirror systems with an isospin up to 𝑇 = 5/2. Our experimental result and other recently reported masses of neutron-deficient sd-shell nuclei agree well with the theoretical predictions, demonstrating that isospin symmetry breaking in sd-shell nuclei—even at high isospin values—is well described by modern shell-model calculations.

20 ≤ A ≤ 38↗
DOE OSTI2024

Evolution of the Electronic and Excitonic Properties in 2D Ruddlesden–Popper Perovskites Induced by Bifunctional Ligands

2D Ruddlesden–Popper metal‐halide perovskites exhibit structural diversity due to a variety of choices of organic ligands. Incorporating bifunctional ligands in such materials is particularly intriguing since it can result in novel electronic properties and functions. However, an in‐depth understanding of the effects of bifunctional ligands on perovskite structures and, consequently, their electronic and excitonic properties, is still lacking. Here, in this work, n = 1 2D perovskites built with organic ligands containing ─CN, ─OH, ─COOH, ─phenyl (Ph), and ─CH 3 functional groups are investigated using ultraviolet and inverse photoemission spectroscopies, density functional theory calculations, and tight‐binding model analyses. The experimentally determined electronic gaps of the ─CN, ─COOH, ─Ph, and ─CH 3 based perovskites exhibit a strong correlation with the in‐plane Pb─I─Pb bond angle, while the ─OH based perovskite deviates from the linear trend. Based on the band structure calculations, this anomaly is attributed to the out‐of‐plane dispersion, caused predominantly by significant interlayer electronic coupling that is present in ─OH based perovskites. These results highlight the complex and diverse impacts of organic ligands on electronic properties, especially in terms of the involvement of strong interlayer electronic coupling. The impact of the bifunctional ligands on the evolution of the exciton binding energy is also addressed.

2D perovskites↗
DOE OSTI2020

Practical quantum computation of chemical and nuclear energy levels using quantum imaginary time evolution and Lanczos algorithms

Various methods have been developed for the quantum computation of the ground and excited states of physical and chemical systems, but many of them require either large numbers of ancilla qubits or high-dimensional optimization in the presence of noise. The quantum imaginary-time evolution (QITE) and quantum Lanczos (QLanczos) methods proposed in Motta et al. (2020) eschew the aforementioned issues. In this study, we demonstrate the practical application of these algorithms to challenging quantum computations of relevance for chemistry and nuclear physics, using the deuteron-binding energy and molecular hydrogen binding and excited state energies as examples. With the correct choice of initial and final states, we show that the number of timesteps in QITE and QLanczos can be reduced significantly, which commensurately simplifies the required quantum circuit and improves compatibility with NISQ devices. We have performed these calculations on cloud-accessible IBM Q quantum computers. With the application of readout-error mitigation and Richardson error extrapolation, we have obtained ground and excited state energies that agree well with exact results obtained from diagonalization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Nuclear properties with semilocal momentum-space regularized chiral interactions beyond N 2 LO

We present a comprehensive investigation of few-nucleon systems as well as light and medium-mass nuclei up to A = 48 using the current Low Energy Nuclear Physics International Collaboration two-nucleon interactions in combination with the third-order (N 2 LO) three-nucleon forces. To address the systematic overbinding of nuclei starting from A ≈ 10 found in our earlier study utilizing the N 2 LO two- and three-nucleon forces, we take into account higher-order corrections to the two-nucleon potentials up through fifth order in chiral effective field theory. Here, the resulting Hamiltonian can be completely determined using the A = 3 binding energies and selected nucleon-deuteron cross sections as input. It is then shown to predict other nucleon-deuteron scattering observables and spectra of light p-shell nuclei, for which a detailed correlated truncation error analysis is performed, in agreement with experimental data. Moreover, the predicted ground state energies of nuclei in the oxygen isotopic chain from 14 O to 26 O as well as 40 Ca and 48 Ca show a remarkably good agreement with experimental values, given that the Hamiltonian is fixed completely from the A ≤ 3 data, once the fourth-order (N 3 LO) corrections to the two-nucleon interactions are taken into account. On the other hand, the charge radii are found to be underpredicted by ≈10% for the oxygen isotopes and by almost 20% for 40 Ca and 48 Ca.

20 ≤ A ≤ 38↗
DOE OSTI2021

Nuclear energy density functionals grounded in ab initio calculations

Here, we discuss the construction of a nuclear energy density functional (EDF) from ab initio computations and advocate the need for a methodical approach that is free from ad hoc assumptions. The equations of state (EoSs) of symmetric nuclear and pure neutron matter are computed using the chiral NNLO sat and the phenomenological AV4' + UIX c Hamiltonians as inputs to self-consistent Green's function (SCGF) and auxiliary field diffusion Monte Carlo (AFDMC) methods. We propose a convenient parametrization of the EoS as a function of the Fermi momentum and fit it on the SCGF and AFDMC calculations. We apply the ab initio based EDF to carry out an analysis of the binding energies and charge radii of different nuclei in the local density approximation. The NNLO sat -based EDF produces encouraging results, whereas the AV4' + UIX c -based one is farther from experiment. Possible explanations of these different behaviors are suggested, and the importance of gradient and spin-orbit terms is analyzed. Our paper paves the way for a practical and systematic way to merge ab initio nuclear theory and density functional theory, while shedding light on some critical aspects of this procedure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Real-Space Pseudopotential Method for the Calculation of Third-Row Elements X-ray Photoelectron Spectroscopic Signatures

X-ray photoelectron spectroscopy (XPS) is a powerful characterization technique that unveils subtle chemical environment differences via core– electron binding energy (CEBE) analysis. We extend the development of realspace pseudopotential methods to calculating 1s, 2s, and 2p 3/2 CEBEs of third-row elements (S, P, and Si) within the framework of Kohn–Sham density-functional theory (KS-DFT). The new approach systematically prevents variational collapse and simplifies core-excited orbital selection within dense energy level distributions. However, careful error cancellation analysis is required to achieve accuracy comparable to all-electron methods and experiments. Combined with real-space KS-DFT implementation, this development enables large-scale simulations with both Dirichlet boundary conditions and periodic boundary conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Observation of Core-Excited Dipole-Bound States

Polar molecules can bind an electron in a diffuse orbital due to the charge-dipole interaction. Electronic excited states of polar molecules can also bind an electron to form core-excited dipole-bound states (DBSs), analogous to core-excited Rydberg states. However, core-excited DBSs have not been observed because of the complicated electronic structure of molecular systems. Here we report the observation of a core-excited DBS in the pyrazolide anion as a result of the favorable electronic structure of the neutral pyrazolyl core, which has a low-lying excited state ($\tilde{A}$ 2 B 1 ) only 266 cm -1 above its ground state ($\tilde{X}$ 2 A 2 ). The binding energy of the DBS associated with the ground state is measured to be 221 cm -1 , while that of the core-excited DBS is 276 cm -1 , which is still a bound state relative to the detachment threshold. Furthermore, vibrational Feshbach resonances are observed for both DBSs and their autodetachment behaviors are studied by resonant photoelectron imaging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Toward Chemical Accuracy for Chemi- and Physisorption with an Efficient Density Functional

Understanding molecular adsorption on surfaces underpins many problems in chemistry and materials science. Accurately and efficiently describing the adsorption has been a challenging task for first-principles methods as the process can involve both short-range chemical bond formations and long-range physical interactions, e.g., van der Waals (vdW) interaction. Density functional theory presents an appealing choice for modeling adsorption reactions, although calculations with many exchange-correlation density functional approximations struggle to accurately describe both chemical and physical molecular adsorptions. Here, we propose an efficient density functional approximation that is accurate for both chemical and physical adsorption by concurrently optimizing its semilocal component and the long-range vdW correction against the prototypical adsorption CO/Pt(111) and Ar 2 binding energy curve. The resulting function opens the door to accurate and efficient modeling of general molecular adsorption.

adsorption↗
DOE OSTI2020

Enhanced Sulfur Dioxide Adsorption in UiO-66 Through Crystal Engineering and Chalcogen Bonding

Adsorption of corrosive SO 2 gas occurs in metal–organic frameworks (MOFs) including UiO-66. Improvements in SO 2 capacity is obtained through the incorporation of residual modulators in the UiO-66 framework by introducing new binding sites in the material, through residual modulators. Four residual modulators were investigated (acetic acid, trifluoroacetic acid, 3-DMAP acid, cyanoacetic acid), and the UiO-66 framework modulated with cyanoacetic acid exhibited nearly twice the SO 2 uptake for the 18:1 modulator/linker synthesis ratio compared with other modulated UiO-66 structures. Density functional theory investigations confirmed that targeted host–guest interactions were maintained after the modulator was incorporated into the framework. The strongest binding energy was between SO 2 and cyanoacetic acid, consistent with dynamic SO 2 adsorption data, and identified contributions from both the SO 2 reacting with the residual modulator and the coordinating linkers. The successful increase in dynamic SO 2 capacity illustrates how often-overlooked non-covalent interactions can be used in targeted adsorption applications. Further investigation into weak electrostatic interactions for adsorption properties is also needed to advance the potential selectivity and capacity in the adsorption sphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗