Search NASA⌕ Search

SEARCH · Search NASA

Results for “Biomass quality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Observationally constrained analysis of sulfur cycle in the marine atmosphere with NASA ATom measurements and AeroCom model simulations

The atmospheric sulfur cycle plays a key role in air quality, climate, and ecosystems, such as pollution, radiative forcing, new particle formation, and acid rain. In this study, we compare the spatially and temporally resolved measurements from the NASA Atmospheric Tomography (ATom) mission with simulations from five AeroCom III models for four sulfur species (dimethyl sulfide (DMS), sulfur dioxide (SO 2 ), particulate methanesulfonate (MSA), and particulate sulfate (SO 4 )). We focus on remote regions over the Pacific, Atlantic, and Southern oceans from near the surface to ~12 km altitude range covering all four seasons. In general, the differences among model results can be greater than 1 order of magnitude. Comparing with observations, model-simulated SO 2 is generally low, whereas SO 4 is generally high. Simulated DMS concentrations near the sea surface exceed observed levels by a factor of 5 in most cases, suggesting potential overestimation of DMS emissions in all models. With GEOS model simulations of tagging emission from anthropogenic, biomass burning, volcanic, and oceanic sources, we find that anthropogenic emissions are the dominant source of sulfate aerosol (40 %–60 % of the total amount) in the ATom measurements at almost all altitudes, followed by volcanic emissions (18 %–32 %) and oceanic sources (16 %–32 %). Similar source contributions can also be derived at broad ocean basins and on monthly scales, indicating the representativeness of ATom measurements for global ocean. Our work presents the first assessment of AeroCom sulfur study using ATom measurements, providing directions for improving sulfate simulations, which remain the largest uncertainty in radiative forcing estimates in aerosol climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Green Needle Coke Production from Pyrolysis Biocrude toward Bio-based Anode Material Manufacture: Biochar Fines Addition Effect as “Physical Template” on the Crystalline Order

Here, a new method for producing green needle coke (GNC) is developed by replacing the “heavy fraction” of petroleum pitch delayed coking with fast pyrolysis biocrude. A series of alternative biocrude distillation, carbonization, and calcination conditions were investigated to determine the influence of these processing parameters onto the crystalline structure of the resulting graphitized material. For the first time, the addition of biochar fines was found to serve as a “physical template” to increase the graphitic nature of the final product. During the initial biocrude carbonization (350–450 °C), volatile compounds are released, and aromatics in pyrolysis biocrude experience condensation, resulting in GNC solids with carbon contents above 95 wt % and some early lamellar structure. In the second stage of the thermal process (25–1500 °C), there are additional thermal decomposition reactions with an increase in the aromatic nature of the graphitized solid. It was found that systematic addition of biochar fines induces a nucleating effect during the GNC development. Thermogravimetric analysis suggests that biochar fines promote polycondensation reactions by modifying the biopitch structure and molecular weight, while elemental analysis (CHN) shows a reduction in both H/C and O/C ratios which are consistent with the increase in aromaticity and removal of oxygenated compounds as thermal treatment evolves. The effects of different bio-based pitch materials (after distillation) and GNC intermediates were evaluated by pyrolysis-gas chromatography mass spectrometry and Fourier transform infrared, displaying slight changes on product yields and quality. X-ray diffraction patterns taken after graphitization evidence an increase in the graphitic order with the addition of biochar fines. Transmittance electron microscopy depicts an improvement on graphitic morphology as biochar fine content increases. The use of biochar fines showed a significant increase in graphitic ordering at addition levels above 0.01 wt %. These results show that thermally treated biocrude/biochar fine systems can produce graphitic structures (hard carbon-like) that might be suitable for the manufacture of sodium-ion batteries.

09 BIOMASS FUELS↗
DOE OSTI2021

Consortium for Production of Affordable Carbon Fibers in the United States (Final Report)

Various feedstocks from coal, petroleum and bio-based acrylonitrile were investigated for their ability to produce carbon fiber within DOE strength (250 ksi), modulus (25 Msi), elongation (>1%) and cost (≤$5/lb) goals for wider utilization in light-weight vehicles for the automotive industry. The overarching approach was to chemically identify and map the various feedstocks, understand the molecular transformation to produce carbon fiber precursors (mesophase for pitch materials of polyacrylonitrile polymer) and how these impact carbon fiber quality. Predictive models were built to relate the feedstocks and precursors to carbon fiber properties using atomistic and micro-scale modeling within ±15%. Using tow-level carbon fiber epoxy composites, carbon fibers tow-level predictions of elastic components of the carbon fibers were also successfully modeled within ±15%, using finite element analysis to confirm single filament carbon fiber properties. These models were validated with tow-level epoxy composite experiments from carbon fibers produced in this study.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Influence of Supplementary Blue and Far-Red Light on the Morphology and Texture of Ocimum basilicum L. Grown in Controlled Environments

Basil (Ocimum basilicum L.) is highly sensitive to environmental conditions and is an ideal candidate for cultivation in controlled environment agriculture (CEA). Light-emitting diode technology has become essential in CEA, offering precise control over light intensity, spectrum, and duration. This study investigated how supplemental blue light, far-red light, or their combination influences basil biomass, morphology, texture, and color when added to a white + red light spectrum. Basil ’Prospera’ and ’Amethyst’ were exposed to five light treatments for 14–28 days: white + red at 180 µmol∙m−2∙s−1 (W) as the control, and four treatments with an additional 60 µmol∙m−2∙s−1 of either white + red (+W60), blue (+B60), far-red (+FR60), or a combination of B and FR (+B30+FR30), for a total photon flux density of 240 µmol∙m−2∙s−1. The results demonstrated that +B60 and +W60 light treatments increased leaf thickness by 17–20% compared to the +FR60 treatment. Conversely, texture analysis revealed that +FR60-treated leaves had higher puncture resistance, with ’Amethyst’ and ’Prospera’ requiring 1.57 ± 0.43 N and 1.45 ± 0.35 N of force, respectively, compared to 1.19 ± 0.32 N and 1.1 ± 0.21 N under +B60. These findings suggest that tailored light recipes in CEA can optimize basil quality, allowing growers to modify traits like leaf color, thickness, and toughness.

Oehler, Madison A. (ORCID:0000000297919667)↗
DOE OSTI2021

Low soil phosphorus availability triggers maize growth stage specific rhizosphere processes leading to mineralization of organic P

Phosphorus (P) is one of the essential nutrients for all living organisms. High-quality mineral P fertilizer is a finite resource with only an estimated 80-100 years of reserves remaining globally. Both plants and microbes have developed several mechanisms such as secretion of organic acids, acidification of the rhizosphere, and production of extracellular enzymes to enhance the acquisition of P from soils. Increased activity of phosphatase occurs in response to P deficiency as part of P starvation responses which catalyze the hydrolysis of P o from soil organic matter (SOM) and release inorganic P (P i ). However, the specific interactions between plants and microbial communities in the rhizosphere soil triggered by P deficiency are largely unknown. In a greenhouse study we grew maize plants in low and high P containing soils and examined the role of rhizosphere processes on mineralization of organic P (P o ) in soils with low and high P availability and different P speciation 23 (Po dominated versus P i dominated) and determine its effect on plant growth. Plant biomass was determined and rhizosphere soils, and soil samples from pots with and without plants were collected at key vegetative growth stages (VGS). A variety of biogeochemical parameters (e.g. microbial biomass C and P, potential phosphatase activities, plant biomass P, soil P species etc.) were determined using both conventional (sequential chemical extraction) and advanced (e.g. high resolution mass spectrometry (FTICR-MS) and 3129 P solution NMR) techniques. Here, we used phospholipid fatty acid (PLFA) and DNA based microbial community analysis to track changes in microbial community structure and diversity. Low P availability induced changes in biogeochemical processes and microbial community composition in the rhizosphere soils of plants grown in low P containing soil. At early VGS, the plants in low P soil were visually struggling which correlated with greater rhizosphere potential acid phosphatase activity and a reduction in P o fractions. At late VGS, the plants appeared to recover which correlated with a decrease in Meh (III) extractable P, an increase in microbial biomass C and P and greater total P in the plant biomass (roots, shoots and leaves). In high P containing soil, on the other hand, greater P availability masked these rhizosphere processes. Our results confirmed the degradation of SOM and Po mineralization in rhizosphere soils driven by microbe and plant need for P. P deficiency may have favored the abundance of fungi which utilized easily degradable root exudates for the production of extracellular enzymes responsible for the mineralize of SOM P o . This study highlights the intertwined mechanisms involved, and emphasizes the importance of, P o sources for plant nutrition and survival in marginal soils.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

A phytophotonic approach to enhanced photosynthesis

Photosynthesis is the dominant biotic carbon sink on earth and hence presents an opportunity for enhanced sequestration of CO 2 . If the average net carbon fixation efficiency of terrestrial plants could be increased by 3.3%, all anthropogenic CO 2 accumulating in the atmosphere could instead be reduced and incorporated into terrestrial biomass. Plants make inefficient use of the overly abundant sunlight available to them, a result of having evolved to be competitive and survive highly dynamic environmental conditions rather than maximize photosynthetic productivity. We explore herein a phytophotonic approach to enhanced photosynthesis, whereby sunlight is redistributed by means of luminescent or persistent luminescent (PersL) materials. Phytophotonics has potential at varied scales, ranging from photobioreactors to greenhouses all the way to crops in the field, the latter having the potential to impact planetary CO 2 levels. The approach is three-fold: a spectral redistribution to relieve high-light-stress at the top surface of leaves and increasingly drive photosynthesis deeper in leaves and canopies; a minute-scale temporal redistribution to bridge periods of intermittent shade and reduce shock associated with variable light conditions; and a multiple-hour temporal redistribution to shift a fraction of high-intensity midday lighting to evening hours. Based on simulations of photoluminescent materials and light quality experiments with a model algal system, it is shown that while lengthening daylight hours will require significant improvements in PersL materials, the other two approaches show more immediate promise. We demonstrate a means of concentrating PersL light from SrAl 2 O 4 :Eu,Dy, approaching levels needed to effectively bridge periods of natural shade, and outline the scientific questions and technical hurdles remaining to realize the benefits of the proposed spectral shift.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Biogas Utilization in Refuse Power Plants (BURP 2 )

The BURP 2 project investigated the technical and financial viability of co firing biogas with waste coal for power generation while using carbon capture and sequestration to achieve net negative emissions. A comparative assessment integrating geospatial mapping, technoeconomic analysis, and life cycle analysis was carried out to evaluate retrofitting an existing coal fired facility in West Virginia, versus developing a new greenfield power plant in Kentucky located near a low quality coal resource. The study found that CO 2 capture rates of 90% or higher, in combination with biogas feedstocks such as animal manure, could significantly reduce global warming potential compared to plants using neither biogas nor CO 2 capture systems. Economic feasibility depended heavily on federal tax credits and proximity to fuel sources. In both greenfield and retrofit scenarios, access to biogas played a key role. Because the retrofit site was located close to existing biogas resources, it represented a feasible option, whereas the greenfield site, being far from pipelines or biogas sources, would require prohibitively expensive biogas transport infrastructure. Overall, the research showed that repurposing waste or low-quality coal with renewable biogas and CO 2 capture systems could provide a viable approach for reducing carbon emissions in power production, if biogas resources are easily accessible and available in sufficient quantities.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Coupling Remote Sensing With a Process Model for the Simulation of Rangeland Carbon Dynamics

Rangelands provide significant environmental benefits through many ecosystem services, which may include soil organic carbon (SOC) sequestration. However, quantifying SOC stocks and monitoring carbon (C) fluxes in rangelands are challenging due to the considerable spatial and temporal variability tied to rangeland C dynamics as well as limited data availability. We developed the Rangeland Carbon Tracking and Management (RCTM) system to track long-term changes in SOC and ecosystem C fluxes by leveraging remote sensing inputs and environmental variable data sets with algorithms representing terrestrial C-cycle processes. Bayesian calibration was conducted using quality-controlled C flux data sets obtained from 61 Ameriflux and NEON flux tower sites from Western and Midwestern US rangelands to parameterize the model according to dominant vegetation classes (perennial and/or annual grass, grass-shrub mixture, and grass-tree mixture). The resulting RCTM system produced higher model accuracy for estimating annual cumulative gross primary productivity (GPP) (R 2 > 0.6, RMSE <390 g C m -2 ) relative to net ecosystem exchange of CO 2 (NEE) (R 2 > 0.4, RMSE <180 g C m -2 ). Model performance in estimating rangeland C fluxes varied by season and vegetation type. The RCTM captured the spatial variability of SOC stocks with R 2 = 0.6 when validated against SOC measurements across 13 NEON sites. Model simulations indicated slightly enhanced SOC stocks for the flux tower sites during the past decade, which is mainly driven by an increase in precipitation. Future efforts to refine the RCTM system will benefit from long-term network-based monitoring of vegetation biomass, C fluxes, and SOC stocks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Grinding and Pelleting Characteristics of Municipal Solid Waste Fractions

The efficient utilization of low-cost carbon feedstocks, such as municipal solid waste (MSW), in biorefineries has become increasingly important for reducing GHG emissions and meeting the growing demand for renewable energy sources. However, MSW as a feedstock presents several challenges, including high moisture content, compositional variability, particle size and shape, density, and ash content. To address these challenges, the potential of mechanical dewatering and high-moisture pelleting processes for densifying MSW fractions, such as paper, cardboard, thin plastic, and thick plastic, into low-cost carbon feedstocks with improved handling and conversion properties were investigated. The effect of these preprocessing technologies on the critical quality attributes (CQAs) of the resulting pellets, including bulk density, durability, and size uniformity, were evaluated. The results showed that with these preprocessing technologies, the paper and cardboard fractions could be pelleted at moisture contents over 40% (w.b.) while achieving >99% durability and >300 kg/m3, while the high moisture plastic fractions were not suitable for pelleting. The thick plastic fraction processed in a screw press was shown to remove up to 30% of the moisture content in a single pass. These findings suggest that these mechanical preprocessing technologies can improve the physical properties of low-cost municipal solid waste fractions for biofuels production.

09 BIOMASS FUELS↗
DOE OSTI2023

High-moisture pelleting of corn stover using pilot- and commercial-scale systems: Impact of moisture content, L / D ratio and hammer mill screen size on pellet quality and energy consumption

Here, high-moisture pelleting of corn stover was tested in pilot- and commercial-scale systems. For the pilot-scale study, a 6.35 mm screen size hammer mill ground corn stover was reconditioned to moisture between 14 and 29.6% (w.b.), and 5, 7 and 9 L/D ratio pellet die were used. At 29% corn stover moisture content and L/D ratios of 5 and 9, the bulk density and durability of the pellets were ≤450 kg/m 3 and <90% and >540 kg/m 3 and >90%, respectively. Increasing the feedstock moisture and L/D ratio increased the pelleting energy. Increasing the hammer mill screen size to 11.11 mm reduced the bulk density but not the durability. The response surface models adequately described the pelleting process (R 2 ≥ 0.88), and analysis of variance showed a strong interaction between the process variables and pellet properties. Commercial-scale testing of high-moisture pelleting using 6.35 mm ground corn stover bales in the moisture range 24–26% (w.b.) produced pellets with a density of >675 kg/m 3 and durability of >98%, whereas increasing the hammer mill screen size to 11.11 mm reduced the bulk density by about 100 kg/m 3 but not the durability. The energy consumption of the commercial-scale unit operations for the high-moisture pelleting process was in the range 98–124 kW h/ton, which is 64–72% less energy than conventional pelleting that requires energy about 350 kW h/ton for biomass drying from 30% (w.b.) to 10% (w.b.) moisture content before pelleting. Pellets produced using high-moisture pelleting met International Organization for Standardization and Pellets Fuel Institute international standards. Published 2023. This article is a U.S. Government work and is in the public domain in the USA.

09 BIOMASS FUELS↗
DOE OSTI2021

Modeling the effect of habitat availability and quality on endangered winter-run Chinook salmon ( Oncorhynchus tshawytscha ) production in the Sacramento Valley

Reconciliation between water uses and sustaining aquatic species populations requires an effort to identify and quantify essential habitat characteristics for ecosystem health and valuation methods to predict ecosystem response to restoration actions. This process is particularly challenging for anadromous fish species such as California's Sacramento River winter-run Chinook salmon, due to their limited geographic range and diverse life history habitat requirements. Tools, such as life-cycle models, are needed to manage population dynamics and quantify the composite effects of processes across space and time. Nevertheless, complex institutions can hinder result interpretation and communication, and limit model use in decision-making. This paper focuses on the federally endangered and endemic Sacramento River winter-run Chinook (Oncorhynchus tshawytscha) by developing a Winter-Run Habitat-based Population Model (WRHAP). Additionally, WRHAP is a conceptual, freshwater rearing stage model that includes alternative rearing habitats reported in the literature (e.g., floodplains, off-channel and tributaries), defines rules of habitat use based on instream conditions, and incorporates a juvenile growth module that combines bioenergetics modeling with empirical growth rates. Model outputs reasonably follow observed out-migration patterns and provide a realistic smolt size distribution arriving at the San Francisco Bay. This effort demonstrates the importance of currently “non-critical” habitats (as defined by the Endangered Species Act) for juvenile development, with floodplain habitat contributing to a quarter of out-migrating biomass (despite < 18% availability and <10% of total rearing days), and off-channel growth being one of the most sensitive parameters (explaining ~13% of average juvenile weight variance). The model shows the utility of a simple population model to explore relationships between habitat quality/quantity and juvenile development, and to assist water/environmental management and decision-making processes focused on species recovery.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Phytoremediation potential of Nerium oleander and Salix alba for heavy metal removal in rock-amended soils: a natural and cost-effective approach

Enhanced weathering (EW) through the application of ground rock is a competitive carbon removal strategy. Adoption of this technology at a meaningful scale requires a systematic assessment of its long-term feasibility, especially with regard to soil quality from the application of rock amendments that contain varying levels of heavy metal (loid)s (HM) such as Cu, Ni, Cr, Co, and Pb. The potential accumulation of these metal (loid)s could be an unintended consequence of repeated large-scale EW applications, necessitating careful evaluation for use in croplands. This study explores the idea of using phytoremediation as a natural, low-cost means of remediating rock-amended soils. Specifically, we examined the ability of Nerium oleander and Salix alba species to remove HM from rock-amended soils in their tissues (i.e., leaves, stems, and roots). In this study, the relative abundance of HM accumulation in hyperaccumulator plants followed the order: Si > Rb > Cu > Sn > Cr > Cd > Pb > Ni > Mo > Co > As > Sb > Se > Cs. Our results indicate that HM accumulation in soils treated with rock were significantly below permissible limits set by the Environmental Protection Agency (EPA). Further, in reasonable amounts, some of these HM serve as essential micronutrients required by plants. In fact, we found increased growth and higher biomass for both plants under rock application than without. We further found a significant uptake of most HM in rock-amended soils planted with S. alba. Comparatively, uptake of certain HM like Ni, Mo, Cs, Pb and Cu was relatively higher in the roots of N. oleander. In contrast to N. oleander, S. alba accumulated higher levels of HM in its stems and leaves than in its roots. Interestingly, 31–35% weathering of metabasalt (applied rock) was observed across plant types over a 5-month period. Overall, we conclude that S. alba has a greater potential for phytoremediation in rock-amended soils, although both plants may be useful in remediating soils with varying levels and types of contamination.

Ibrahim, Naira [Jackson State Univ., Jackson, MS (↗
DOE OSTI2023

Comparing Parallel Plastic‐to‐X Pathways and Their Role in a Circular Economy for PET Bottles

Abstract The United States generates the most plastic waste of any country and is a top contributor to global plastic pollution. Multiple end‐of‐life strategies must be implemented to minimize environmental impacts and retain valuable plastic material, but it is challenging to compare options that generate products with different lifetimes and utilities. Herein, they present a material flow model equipped with consequential life cycle assessment, cost analysis, and a plastic circularity indicator that considers product quality and lifetime. The model is used to estimate the greenhouse gas (GHG) emissions, circularity, and cost of polyethylene terephthalate (PET) bottle mechanical downcycling to lower‐quality resin, closed‐loop glycolysis to food‐grade PET, upcycling to glass fiber‐reinforced plastic, and conversion to non‐plastic products (electricity, oil) on a United States economy‐wide basis for the year 2020. A brute force algorithm suggests that a combination of 68% glycolysis, 11% mechanical recycling, 6% upcycling, 9% landfilling, and 5% incineration can minimize the cost and GHG emissions and maximize the circularity of the current PET economy. However, uncertainty around transportation distances, materials recovery facility efficiencies, and recycling yields can result in different “optimal” pathway mixes. This flexible framework enables informed decision‐making to move toward a cost‐ and environment‐conscious circular economy for plastic.

09 BIOMASS FUELS↗
DOE OSTI2025

Impact of low-chemical storage pretreatment of loblolly pine bark on biochar from microwave pyrolysis

Forest product residues such as bark represent a low-cost, abundant feedstock for bioenergy, but their high ash and alkali and alkaline earth metal (AAEM) content limit thermochemical conversion efficiency. This study evaluates the use of low-severity chemical pretreatments during anaerobic storage to improve the performance of microwave pyrolysis for loblolly pine bark. Bark was treated with dilute sulfuric acid (0.1% and 1%, w/w) or sodium hydroxide (4%, w/w) and incubated anaerobically for one or two weeks to simulate in-pile biorefinery storage. The most effective treatment—1% H2SO4 for two weeks—reduced AAEM content by 35.7% and increased bio-oil yield by 11% compared to untreated controls, while also reducing pyrolysis gas production. In contrast, alkali treatment did not reduce AAEM levels and led to decreased bio-oil yields with increased gas formation. Although biochar yields were relatively stable across treatments, their physicochemical characteristics varied significantly. Acid-treated bark yielded biochars with higher carbon content, lower O/C and H/C ratios, greater surface area, and enhanced heating values. These improvements suggest that chemical pretreatment during storage can tailor biochar quality for specific end uses. Biochars produced under optimized conditions exhibited properties suitable for soil amendment, carbon sequestration, and solid fuel applications. This integrated approach—combining storage, mild chemical conditioning, and microwave pyrolysis—provides a viable pathway to enhance the value and sustainability of bark-derived bioenergy products.

09 - BIOMASS FUELS↗
DOE OSTI2026

Process Optimization and Real-Time Control of Synergistic Microalgae Cultivation and Wastewater Treatment (Final Technical Report)

The overarching goal of this work was to accelerate the commercialization of high productivity, mixed community microalgal treatment technologies for the synergistic treatment of wastewater and the production of biofuel feedstocks. This project addressed a critical barrier to the financial viability and energy efficiency of algal wastewater treatment: an inability to design and operate high-rate processes that reliably achieve target effluent qualities, areal productivities, and biochemical compositions (lipid, protein, carbohydrate content) despite fluctuations in wastewater composition, weather, and microbial communities. Key outcomes from this work include an optimized and controlled Advanced Biological Nutrient Recovery (ABNR) design as well as a suite of open-source tools that include a calibrated and validated algae process simulator in QSDsan and a novel low-cost, real-time microbial monitoring tool. These tools can be leveraged by other algal cultivation and wastewater treatment technology developers in future work.

09 BIOMASS FUELS↗
DOE OSTI2025

Long-Range Transport of Biomass Burning Aerosols from Southern Africa: A Case Study Using Layered Atlantic Smoke Interactions with Clouds Observations

A case study of an incoming biomass burning aerosol plume at Ascension Island is analyzed for the peak of the 2017 fire season using satellites, reanalysis and in situ observations. Measurements from the Atmospheric Radiation Measurement Mobile Facility 1 reveal an abrupt change from relatively clean conditions (~70 parts per billion by volume of carbon monoxide) to a more polluted state (~150 parts per billion by volume of carbon monoxide). Corresponding changes in aerosol size reveal a broadening of size distributions toward larger optical diameters, consistent with the arrival of aged aerosols. Within a 24 h period, black carbon fraction increases ~500% from ~300 ng m e to ~1500 ng m 3 , while light absorption coefficients increase ~300%. Long-range transport of these aerosols is primarily confined between 2 and 5 km above sea level along the northwesterly trade winds. Our results show that the primary driver of increases in aerosol loading over Ascension Island is an intensification of the St. Helena high-pressure system (anticyclone) that leads to a weakening of trade winds and increases westward transport on its northern flank. A better understanding of the complex interactions between air quality, meteorology and long-range aerosol transport is important for future modeling studies focused on aerosol–cloud–radiation interactions over the open ocean and reducing its associated uncertainties.

aerosol size distribution↗
DOE OSTI2026

An evaluation of air quality in major urban areas of India

Rapid economic growth and burgeoning population have contributed to enhanced levels of PM 2.5 concentrations in urban regions of India. Evaluation of ambient air quality facilitates the assessment of effectiveness of emission control measures and early identification of new sources. This study provides a comprehensive statistical analysis of PM 2.5 concentrations in key urban areas across India, including Delhi, Kolkata, Mumbai, Chennai, Hyderabad, and several regional centers. Data from 2017 to 2023 was analyzed using trend analysis, cluster analysis, principal component analysis, and geostatistical interpolation to understand spatiotemporal variations and sources. The analysis reveals significant differences in spatial distribution of PM 2.5 concentrations with high annual averages in urban regions in Indo-Gangetic plain (82–123 μg m −3 ) and relatively lower concentrations (29–46 μg m −3 ) in southern urban areas of Kerala, Tamil Nadu and Andhra Pradesh. Delhi state had the highest 24-averaged PM 2.5 concentrations (112 μg m −3 ) followed by urban regions in Uttar Pradesh, Bihar and West Bengal (94 μg m −3 ). Trend analysis from 2017 to 2023 revealed an overall 2.5% decline in site-wide PM2.5 concentrations, with the exception of Ludhiana, which exhibited a consistent annual increase of 10%. Principal component analysis (PCA) attributes 30% of the variance to wintertime emissions, 13% to biomass burning, and 18% to the regional haze in the northern Indo-Gangetic Plain. Different analyses clearly demonstrates the contribution of biomass burning to pollution in Delhi and surrounding cities. Transboundary pollution to Kolkata is likely from the highly polluted region in Indo-Gangetic Plain. Coastal cities of Mumbai and Chennai has relatively lower pollution attributed to the influence of sea breeze dilution, with mostly local contribution and some potential transport from upwind industry clusters. Hyderabad also has local contribution due to high density of vehicular traffic and local small industries. This study shows that mitigation efforts targeting clusters of regions should be undertaken to curb the high PM2.5 pollution. Policy measures should be implemented both at local and the intra-state level to address shared sources and transport of pollution.

Hysplitbacktrajectories↗
DOE OSTI2022

Floating solar panels on reservoirs impact phytoplankton populations: A modelling experiment

Floating solar photovoltaic (FPV) deployments are increasing globally as the switch to renewable energy intensifies, representing a considerable water surface transformation. FPV installations can potentially impact aquatic ecosystem function, either positively or negatively. However, these impacts are poorly resolved given the challenges of collecting empirical data for field or modelling experiments. In particular, there is limited evidence on the response of phytoplankton to changes in water body thermal dynamics and light climate with FPV. Given the importance of understanding phytoplankton biomass and species composition for managing ecosystem services, we use an uncertainty estimation approach to simulate the effect of FPV coverage and array siting location on a UK reservoir. FPV coverage was modified in 10% increments from a baseline with 0% coverage to 100% coverage for three different FPV array siting locations based on reservoir circulation patterns. Results showed that FPV coverage significantly impacted thermal properties, resulting in highly variable impacts on phytoplankton biomass and species composition. The impacts on phytoplankton were often dependent on array siting location as well as surface coverage. Changes to phytoplankton species composition were offset by the decrease in phytoplankton biomass associated with increasing FPV coverage. We identified that similar phytoplankton biomass reductions could be achieved with less FPV coverage by deploying the FPV array on the water body's faster-flowing area than the central or slower flowing areas. The difference in response dependent on siting location could be used to tailor phytoplankton management in water bodies. Simulation of water body-FPV interactions efficiently using an uncertainty approach is an essential tool to rapidly develop understanding and ultimately inform FPV developers and water body managers looking to minimise negative impacts and maximise co-benefits.

14 SOLAR ENERGY↗