Search NASA⌕ Search

SEARCH · Search NASA

Results for “Chemical Fractionation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Nitrogen abundance in Comet Halley

Data on the nitrogen-containing compounds that observed spectroscopically in the coma of Comet Halley are summarized, and the elemental abundance of nitrogen in the Comet Halley nucleus is derived. It is found that 90 percent of elemental nitrogen is in the dust fraction of the coma, while in the gas fraction, most of the nitrogen is contained in NH3 and CN. The elemental nitrogen abundance in the ice component of the nucleus was found to be deficient by a factor of about 75, relative to the solar photosphere, indicating that the chemical partitioning of N2 into NH3 and other nitrogen compounds during the evolution of the solar nebula cannot account completely for the low abundance ratio N2/NH3 = 0.1, observed in the comet. It is suggested that the low N2/NH3 ratio in Comet Halley may be explained simply by physical fractionation and/or thermal diffusion.

Wyckoff, Susan↗

Spectral properties of mixtures of montmorillonite and dark grains - Implications for remote sensing minerals containing chemically and physically adsorbed water

The spectral properties from 0.4 to 3 microns of montmorillonite plus dark carbon grains (called opaques) of various sizes are studied as a function of the weight fraction of opaques present. The reflectance level and band depths of the 1.4-, 1.9-, 2.2-, and 2.8-micron water and/or OH absorption features are analyzed using derived empirical relationships and scattering theory. It is found that the absorption band depths and reflectance level are a very nonlinear function of the weight fraction of opaques present but can be predicted in many cases by simple scattering theory. The 2.8-micron bound water fundamental band is the most difficult absorption feature to suppress. The overtone absorptions are suppressed a greater amount than the fundamental but are still apparent even when 10-20 wt pct opaques are present. The relationships observed and the simple scattering theory presented show that quantitative compositional remote sensing studies are feasible for surfaces containing complex mineral mixtures.

Clark, R. N.↗

Galactic chemical evolution - Z versus ln(1/mu) relationship

The ways in which a radial abundance gradient in a disk galaxy may be interpreted are reexamined, asking how metallicity Z depends upon gas mass fraction mu in analytic models characterized by a temporally varying history of metal-poor infall. Six different such models are studied, and it is shown that the metallicity versus gas fraction relationship is well approximated by an expression which is the analog of the Z = y ln(1/mu) relation for closed evolution. The approximation appears valid when the infall rate is nonneglible, but not so great that it dominates the gas budget.

Clayton, Donald D.↗

Demand and supply of hydrogen as chemical feedstock in USA

Projections are made for the demand and supply of hydrogen as chemical feedstock in USA. Industrial sectors considered are petroleum refining, ammonia synthesis, methanol production, isocyanate manufacture, edible oil processing, coal liquefaction, fuel cell electricity generation, and direct iron reduction. Presently, almost all the hydrogen required is produced by reforming of natural gas or petroleum fractions. Specific needs and emphases are recommended for future research and development to produce hydrogen from other sources to meet the requirements of these industrial sectors. The data and the recommendations summarized in this paper are based on the Workshop 'Supply and Demand of Hydrogen as Chemical Feedstock' held at the University of Houston on December 12-14, 1977.

Huang, C. J.↗

Microwave dielectric spectrum of rocks

A combination of several measurement techniques was used to investigate the dielectric properties of 80 rock samples in the microwave region. The real part of the dielectric constant, epsilon', was measured in 0.1 GHz steps from 0.5 to 18 GHz, and the imaginary part, epsilon'', was measured at five frequencies extending between 1.6 and 16 GHz. In addition to the dielectric measurements, the bulk density was measured for all the samples and the bulk chemical composition was determined for 56 of the samples. The study shows that epsilon' is frequency-dependent over the 0.5 to 18 GHz range for all rock samples, and that the bulk density rho accounts for about 50 percent of the observed variance of epsilon'. For individual rock types (by genesis), about 90 percent of the observed variance may be explained by the combination of density and the fractional contents of SiO2, Fe2O3, MgO, and TiO2. For the loss factor epsilon'', it was not possible to establish statistically significant relationships between it and the measured properties of the rock samples (density and chemical composition).

Ulaby, F. T.↗

A survey of lunar rock types and comparison of the crusts of earth and moon

The principal known types of lunar rocks are briefly reviewed, and their chemical relationships discussed. In the suite of low-KREEP highland rocks, Fe/(Fe + Mg) in the normative mafic minerals increases and the albite content of normative plagio-clase decreases as the total amount of normative plagioclase increases, the opposite of the trend predicted by the Bowen reaction principle. The distribution of compositions of rocks from terrestrial layered mafic intrusives is substantially different: here the analyses fall in several discrete clusters (anorthositic rocks, norites, granophyres and ferrogabbros, ultramafics), and the chemical trends noted above are not reproduced. It is suggested that the observed trends in lunar highland rocks could be produced by crystal fractionation in a deep global surface magma system if (1) plagiociase tended to float, upon crystallization, and (2) the magma was kept agitated and well mixed (probably by thermal convection) until crystallization was far advanced and relatively little residual liquid was left. After the crustal system solidified, but before extensive cooling had developed a thick, strong lithosphere, mantle convection was able to draw portions of the lunar anorthositic crust down into the mantle.

Wood, J. A.↗

An investigation of microstructural characteristics of contact-lens polymers

The free volume and gas permeability in several contact lens specimens were measured as part of a Space Commercialization Program. Free volume was measured using positron lifetime spectroscopy, while permeability for O2, N2, CO2 gases was measured using mass spectrometry and polarography. Permeability for all gases increases with the mean free volume cell size in the test samples. As might be expected, the specimens with the highest free volume fraction also exhibit the lowest Rockwell Hardness Number. An interesting corollary is the finding that the presence of fluorine atoms in the lens chemical structure inhibits filling up of their free volume cells. This is expected to allow the lenses to breathe freely while in actual use.

Singh, Jag J.↗

Chondrule formation in lightning discharges

Chondrules represent a significant mass fraction of primitive meteorites. These millimeter-sized glassy droplets appear to be the products of intensive transient heating events. Their size distribution, chemical and mineral composition, texture, isotope composition suggest that chondrules were produced as a result of short-duration melting followed by rapid cooling of solid precursor particles. Gas-dynamics heating, magnetic reconnection, and electrostatic discharges are thought to be the leading candidates to explain chondrule formation. In this paper we summarize our recent theoretical progress on the effects of 'lightning' in the early solar system and also report on preliminary results from our laboratory experiments. Differential settling of various sized dust particles toward the midplane of the nebula is suspected to build large-scale charge separations that episodically relax via the electric breakdown of the nebular gas. The electrostatic discharge os analogous to lightning in the Earth's atmosphere.

Horanyi, M.↗

The X-ray emission of galaxies

Results from several satellite observations are used to discuss the discrete emission component of galaxies, including bright binary sources, supernova and supernova remnants. Through X-ray observations, direct evidence of the chemical and dynamical interactions between galaxies and the surrounding medium can be obtained. Although the X-ray emission represents only a small fraction of the bolometric emission of a normal galaxy, it allows the study of the system's component to be performed. The results on low luminosity active galactic nuclei are also discussed.

Fabbiano, G.↗

The Amorphous Component in Martian Basaltic Soil in Global Perspective from MSL and MER Missions

The mineralogy instrument CheMin onboard the MSL rover Curiosity analyzed by transmission XRD [1] the <150 microns size fraction of putative global basaltic martian soil from scoops 4 and 5 of the Rocknest aeolian bedform (sol 81-120). Here, we combine chemical (APXS) and mineralogical (Mossbauer; MB) results from the MER rovers with chemical (APXS) and mineralogical (CheMin) results from Curiosity to constrain the relative proportions of amorphous and crystalline components, the bulk chemical composition of those components, and the

Morris, R. V.↗

Adrianite, Ca12(Al4Mg3Si7)O32Cl6, a New Cl-rich Silicate Mineral From the Allende Meteorite: An Alteration Phase in a Ca-Al-rich Inclusion

Adrianite (IMA 2014-028), Ca12(Al4Mg3Si7)O32Cl6, is a new Cl-rich silicate mineral and the Si,Mg analog of wadalite. It occurs with monticellite, grossular, wadalite, and hutcheonite in altered areas along some veins between primary melilite, spinel, and Ti,Al-diopside in a Type B1 FUN (Fractionation and Unidentified Nuclear effects) Ca-Al-rich inclusion (CAI), Egg-3, from the Allende CV3 carbona-ceous chondrite. The mean chemical composition of type adrianite by electron probe microanalysis is (wt%) CaO 41.5, SiO2 27.5, Al2O3 12.4, MgO 7.3, Na2O 0.41, Cl 13.0, O=Cl –2.94, total 99.2, giving rise to an empirical formula of (Ca11.69Na0.21)(Al3.85Mg2.88Si7.23)O32Cl5.80. The end-member formula is Ca12(Mg5Si9)O32Cl6. Adrianite has the I43d wadalite structure with a = 11.981 Å, V = 1719.8 Å3, and Z = 2, as revealed by electron backscatter diffraction. The calculated density using the measured composition is 3.03 g/cm3. Adrianite is a new secondary mineral in Allende, apparently formed by alkali-halogen metasomatic alteration of primary CAI minerals such as melilite, anorthite, perovskite, and Ti,Al-diopside on the CV chondrite parent asteroid. Formation of secondary Cl-rich minerals sodalite, adrianite, and wadalite during metasomatic alteration of the Allende CAIs suggests that the metasomatic fluids had Cl-rich compositions. The mineral name is in honor of Adrian J. Brearley, mineralogist at the University of New Mexico, U.S.A., in recognition of his many contributions to the understanding of secondary mineralization in chondritic meteorites.

Chi Ma↗

Wave Rotor Enhanced Nuclear (WREN) Propulsion: NASA Innovative Advanced Concepts (NIAC) - Phase I Final Report

Nuclear Thermal Propulsion (NTP) is identified as one of the preferred propulsion technologies for manned missions throughout the solar system (NASA MSFC).[1, 2] The state-ofthe-art NTP cycle is based on a solid core Nuclear Engine for Rocket Vehicle Application (NERVA)[3] class technology (Fig. 1) that is envisioned to provide a specific impulse of 900 seconds doubling chemical rocket performance (450 seconds). Even with this impressive increase, the NTP NERVA designs still have issues providing adequate initial to final mass fractions for high ΔV missions.[4] Nuclear Electric Propulsion (NEP) can provide extremely high Isp (2,000 to over 10,000 seconds) but with only low thrust and limits on mass to power ratios. The need for an electric power source also adds the issue of heat rejection in space where thermal energy conversion is at best 30-40% under ideal conditions. NASA Space Technology Mission Directorate (STMD) has recently expressed interest in finding advanced nuclear propulsion technology through the NASA Go:Thrust RFI.[5, 6] A novel Wave Rotor (WR) topping cycle has been proposed for our NASA NIAC concept. It promises to deliver similar thrust as NERVA class NTP propulsion, but with Isp in the 1,200-2,000 second range. Coupled with an NEP cycle, the duty cycle Isp can further be increased (1,800-4,000 seconds) with minimal addition of dry mass. This bimodal design enables fast transit trajectories for manned missions to Mars and revolutionizes the deep space exploration of our solar system.

Nuclear Thermal Propulsion↗

Organic molecules as chemical fossils - The molecular fossil record

The study of biochemical clues to the early earth and the origin of life is discussed. The methods used in such investigation are described, including the extraction, fractionation, and analysis of geolipids and the analysis of kerogen. The occurrence of molecular fossils in the geological record is examined, discussing proposed precursor-product relationships and the molecular assessment of deep sea sediments, ancient sediments, and crude petroleums. Alterations in the molecular record due to diagenesis and catagenesis are considered, and the use of microbial lipids as molecular fossils is discussed. The results of searches for molecular fossils in Precambrian sediments are assessed.

Eglinton, G.↗

Refractory inclusions with unusual chemical compositions from the Vigarano carbonaceous chondrite

Neutron activation was used to test ten inclusions, nine Vigarano and one from Leoville, for major and trace elements. Six Vigarano refractory inclusions have refractory element fractionations that are rare or absent in Allende inclusions. Vig 1623-11 has Th/La and Ir/Mo ratios that are lower than those of any Allende Group I or modified Group I inclusions, and Os/La, Ir/La, and Zr/Hf ratios that are among the lowest in those inclusions. The low Os/La, Ir/La, and Ir/Mo ratios seem to require nonrepresentative sampling of condensate phase in the nebula to a degree that is usual for Allende Group I and modified group I inclusions. The nature and origins of the different inclusions are discussed.

Sylvester, Paul J.↗

Machine Learning Application to Atmospheric Chemistry Modeling

Atmospheric chemistry models are a central tool to study the impact of chemical constituents on the environment, vegetation and human health. These models split the atmosphere in a large number of grid-boxes and consider the emission of compounds into these boxes and their subsequent transport, deposition, and chemical processing. The chemistry is represented through a series of simultaneous ordinary differential equations, one for each compound. Given the difference in life-times between the chemical compounds (milli-seconds for O (sup 1) D (Deuterium) to years for CH4) these equations are numerically stiff and solving them consists of a significant fraction of the computational burden of a chemistry model. We have investigated a machine learning approach to emulate the chemistry instead of solving the differential equations numerically. From a one-month simulation of the GEOS-Chem model we have produced a training dataset consisting of the concentration of compounds before and after the differential equations are solved, together with some key physical parameters for every grid-box and time-step. From this dataset we have trained a machine learning algorithm (regression forest) to be able to predict the concentration of the compounds after the integration step based on the concentrations and physical state at the beginning of the time step. We have then included this algorithm back into the GEOS-Chem model, bypassing the need to integrate the chemistry. This machine learning approach shows many of the characteristics of the full simulation and has the potential to be substantially faster. There are a wide range of application for such an approach - generating boundary conditions, for use in air quality forecasts, chemical data assimilation systems, etc. We discuss speed and accuracy of our approach, and highlight some potential future directions for improving it.

Keller, Christoph A.↗

Chemical consequences of major impact events on earth

Violent cometary or asteroidal impact events comparable to that which terminated the Cretaceous era must produce large amounts of nitrogen oxides, sufficient to provide NOx mole fractions much larger than 100 ppm over areas of millions of square kilometers. Rapid production of NO2, and subsequent rainout of HNO3 and other strong acids can acidify surface waters, selectively destroying CaCO3 shells. This scenario holds the promise of explaining both the scope of Cretaceous biological extinctions and their extraordinary selectivity.

Lewis, J. S.↗

Odor intensity and characterization studies of exhaust from a turbojet engine combustor

Sensory odor tests of the exhaust from a turbojet combustor operating at simulated idle conditions were made by a human panel sniffing diluted exhaust gas. Simultaneously, samples of undiluted exhaust gas were collected on adsorbent substrates, subsequently removed by solvent flushing, and analyzed chemically by liquid chromatographic methods. The concentrations of the principal malodorous species, the aromatic (unburned fuel-related) and the oxygenated (partially burned fuel) fractions, as determined chromatographically, correlated well with the intensity of the odor as determined by sniffing. Odor intensity increased as combustion efficiency decreased. Combustor modifications which increased combustion efficiency decreased odor intensity.

Butze, H. F.↗

Odor intensity and characterization studies of exhaust from a turbojet engine combustor

Sensory odor tests of the exhaust from a turbojet combustor operating at simulated idle conditions were made by a human panel sniffing diluted exhaust gas. Simultaneously, samples of undiluted exhaust gas were collected on adsorbent substrates, subsequently removed by solvent flushing, and analyzed chemically by liquid chromatographic methods. The concentrations of the principal malodorous species, the aromatic (unburned fuel-related) and the oxygenated (partially burned fuel) fractions, as determined chromatographically, correlated well with the intensity of the odor as determined by sniffing. Odor intensity increased as combustion efficiency decreased. Combustor modifications which increased combustion efficiency decreased odor intensity.

Butze, H. F.↗