Search NASA⌕ Search

SEARCH · Search NASA

Results for “Compilers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

A compilation of information and data on the Manson impact structure

A problem for the impact hypothesis for the Cretaceous-Tertiary (K-T) mass extinction is the apparent absence of an identifiable impact site. The Manson Impact Structure is a candidate because it is the largest recognized in the U.S.; it is relatively close to the largest and most abundant shocked quartz grains found at the K-T boundary; and its age is indistinguishable from that of the K-T boundary based on paleontological evidence, fission track dates, and preliminary Ar-40/Ar-39 measurements. The region of northwest central Iowa containing the Manson Impact Structure is covered by Quaternary glacial deposits underlain by Phanerozoic sedimentary rocks (mostly flat-lying carbonates) and Proterozoic red clastic, metamorphic, volcanic, and plutonic rocks. In a circular area about 22 miles (35 km) in diameter around Manson, Iowa, this normal sequence is absent or disturbed and near the center of the disturbed area granitic basement rocks have been uplifted some 20,000 ft (6000m). Attention was drawn to Manson initially by the unusual quality of the groundwater there. Within the structure three roughly concentric zones of rock associations have been identified: (1) displaced strata; (2) completely disrupted strata, and igneous and metamorphic rocks. Manson was established as an impact structure based on its circular shape, its central uplift, and the presence of shocked quartz within the granitic central uplift. A gravity survey identified locations of low-density brecciated rocks and high-density uplifted crystalline rocks, but the outer boundary of the structure could not be established. Aeromagnetic and ground magnetic surveys showed locations and depths of shallowly buried crystalline rock and the locations of faults. A refraction seismic survey identified the crystalline central uplift, determined that the average elevation of bedrock is 70 ft (20 m) higher outside the structure than within, and was used to map the bedrock topography within the structure. A connection between the Manson impact and the K-T boundary may be established or refuted through study of the impact energy, the impact time, and composition of host rock, possible impactors, and impact melts.

Hartung, Jack B.↗
NASA NTRS1988

Compilation of methods in orbital mechanics and solar geometry

This paper contains a collection of computational algorithms for determining geocentric ephemerides of Earth satellites, useful for both mission planning and data reduction applications. Special emphasis is placed on the computation of sidereal time, and on the determination of the geocentric coordinate of the center of the Sun, all to the accuracy found in the Astronomical Almanac. The report is completely self-contained in that no requirement is placed on any external source of information, and hence, these methods are ideal for computer application.

Buglia, James J.↗
NASA NTRS1988

Refining, revising, augmenting, compiling and developing computer assisted instruction K-12 aerospace materials for implementation in NASA spacelink electronic information system

The NASA Spacelink is an electronic information service operated by the Marshall Space Flight Center. The Spacelink contains extensive NASA news and educational resources that can be accessed by a computer and modem. Updates and information are provided on: current NASA news; aeronautics; space exploration: before the Shuttle; space exploration: the Shuttle and beyond; NASA installations; NASA educational services; materials for classroom use; and space program spinoffs.

Blake, Jean A.↗
NASA NTRS1989

Research in human performance related to space: A compilation of three projects/proposals

Scientific projects were developed in order to maximize performance in space and assure physiological homeostatis upon return. Three projects that are related to this common goal were either initiated or formulated during the Faculty Fellowship Summer Program. The projects were entitled: (1) Effect of simulated weightlessness (bed rest) on muscle performance and morphology; (2) Effect of submaximal eccentric muscle contractions on muscle injury, soreness and performance: A grant proposal; and (3) Correlation between isolated joint dynamic muscle strength to end-effector strength of the push and pull extravehicular activity (EVA) ratchet maneuver. The purpose is to describe each of these studies in greater detail.

Hasson, Scott M.↗
NASA NTRS1990

An efficient data dependence analysis for parallelizing compilers

A novel algorithm, called the lambda test, is presented for an efficient and accurate data dependence analysis of multidimensional array references. It extends the numerical methods to allow all dimensions of array references to be tested simultaneously. Hence, it combines the efficiency and the accuracy of the both approaches. This algorithm has been implemented in PARAFRASE, a FORTRAN program parallelization restructurer developed at the University of Illinois at Urbana-Champaign. Some experimental results are presented to show its effectiveness.

Li, Zhiyuan↗
NASA NTRS1990

Compiler-directed cache management in multiprocessors

The necessity of finding alternatives to hardware-based cache coherence strategies for large-scale multiprocessor systems is discussed. Three different software-based strategies sharing the same goals and general approach are presented. They consist of a simple invalidation approach, a fast selective invalidation scheme, and a version control scheme. The strategies are suitable for shared-memory multiprocessor systems with interconnection networks and a large number of processors. Results of trace-driven simulations conducted on numerical benchmark routines to compare the performance of the three schemes are presented.

Cheong, Hoichi↗
NASA NTRS1990

Generic extravehicular (EVA) and telerobot task primitives for analysis, design, and integration. Version 1.0: Reference compilation for the EVA and telerobotics communities

The results are described of an effort to establish commonality and standardization of generic crew extravehicular (crew-EVA) and telerobotic task analysis primitives used for the study of spaceborne operations. Although direct crew-EVA plans are the most visible output of spaceborne operations, significant ongoing efforts by a wide variety of projects and organizations also require tools for estimation of crew-EVA and telerobotic times. Task analysis tools provide estimates for input to technical and cost tradeoff studies. A workshop was convened to identify the issues and needs to establish a common language and syntax for task analysis primitives. In addition, the importance of such a syntax was shown to have precedence over the level to which such a syntax is applied. The syntax, lists of crew-EVA and telerobotic primitives, and the data base in diskette form are presented.

Smith, Jeffrey H.↗
NASA NTRS1985

Bearing Tester Data Compilation Analysis, and Reporting and Bearing Math Modeling

The magnitude and direction of fluid induced torques and forces on the 57 mm bearing cage is considered to be a contributing factor in possible cage instabilities that can produce intermittent high heating in the bearing. Analyses of the fluid forces and torques are presented. Heat generated by viscous fluid work was estimated for two flow diverter configurations and a coolant flow of 10 lbs/sec to support the thermal evaluation of the LOX Bearing Materials Tester. Results of the analysis of the LOX turbopump turbine end bearings are discussed. Coolant velocities for the no. 4 LOX turbopump turbine end bearings were estimated as a function of shaft speed and coolant flow rate. Contact angles and track width data were developed for the 57 mm bearing as functions of shaft speed, and axial and radial loads. The Advanced Dynamics of Rolling Elements (ADORE) computer program was installed on the MSFC UNIVAC 1100 and a test case successfully run. Both the text output and the plotting output were verified. The Bearing Seal and Materials Tester - Test Condition Data Base was developed. The parametric analysis of the operating characteristics of the LOX turbopump pump end bearing using the 45 mm bearing thermal model was begun.

Source record↗
NASA NTRS1991

A spectrophotometric atlas of white dwarfs compiled from the IUE archives

Ultraviolet spectrophotometric data are presented for 182 subluminous stars, mostly white dwarfs, that have been observed with the low-resolution mode of the IUE satellite since 1978 and for which archived data became available on April 1, 1989. Tables of 20 A binned data are given for all stars. Of these, 133 cover the entire wavelength range of the IUE, while the remainder have partial coverage. Plots of the original unbinned spectra are given. Many targets had multiple spectra combined, and the older spectra were reprocessed and corrected for reduction procedure changes made over the past 10 years.

Wegner, Gary↗
NASA NTRS1992

A compilation of lunar and Mars exploration strategies utilizing indigenous propellants

The use of propellants manufactured from indigenous space materials has the potential to significantly reduce the amount of mass required to be launched from the Earth's surface. The extent of the leverage, however, along with the cost for developing the infrastructure necessary to support such a process, is unclear. Many mission analyses have been performed that have attempted to quantify the potential benefits of in situ propellant utilization. Because the planning of future space missions includes many unknowns, the presentation of any single study on the use of in situ propellants is often met with critics' claims of the inaccuracy of assumptions or omission of infrastructure requirements. The results of many such mission analyses are presented in one format. Each summarized mission analysis used different assumptions and baseline mission scenarios. The conclusion from the studies is that the use of in situ produced propellants will provide significant reductions in Earth launch requirements. This result is consistent among all of the analyses regardless of the assumptions used to obtain the quantitative results. The determination of the best propellant combination and the amount of savings will become clearer and more apparent as the technology work progresses.

Linne, Diane L.↗
NASA NTRS1991

Compiling and editing agricultural strata boundaries with remotely sensed imagery and map attribute data using graphics workstations

The USDA presently uses labor-intensive photographic interpretation procedures to delineate large geographical areas into manageable size sampling units for the estimation of domestic crop and livestock production. Computer software to automate the boundary delineation procedure, called the computer-assisted stratification and sampling (CASS) system, was developed using a Hewlett Packard color-graphics workstation. The CASS procedures display Thematic Mapper (TM) satellite digital imagery on a graphics display workstation as the backdrop for the onscreen delineation of sampling units. USGS Digital Line Graph (DLG) data for roads and waterways are displayed over the TM imagery to aid in identifying potential sample unit boundaries. Initial analysis conducted with three Missouri counties indicated that CASS was six times faster than the manual techniques in delineating sampling units.

Cheng, Thomas D.↗
NASA NTRS1992

Absorption parameters of very dense molecular spectra for the HITRAN compilation

Cross sections for the heavy molecules CFC-11, CFC-12, CFC-13, CFC-14, CFC-22, CFC-113, CFC-114, CFC-115, CCl4, ClONO2, N2O5, HNO4, and HNO3 are included on the HITRAN 91 database. For many of these species, the cross sections vary by a factor of two between room temperature and temperatures near 210 K. The chemical importance of the heavy molecules, the quantitative accuracy of the HITRAN 91 cross sections, and the need for additional spectroscopic quantification are discussed.

Massie, S. T.↗
NASA NTRS1956

Calculation and Compilation of the Unsteady-lift Functions for a Rigid Wing Subjected to Sinusoidal Gusts and to Sinusoidal Sinking Oscillations

The total lift responses to sinusoidal sinking oscillations and to sinusoidal gusts have been calculated, largely from existing information, for wings of various plan forms in subsonic and supersonic flow. For most of the cases considered, closed-form expressions are given and the final results are presented in the form of plots of the square of the modulus of the lift coefficient for wings in a sinusoidally oscillating gust field and in the form of the real and imaginary parts of the lift coefficient for wings undergoing sinusoidal sinking oscillations.

LOADS, GUST - WINGS↗
NASA NTRS1993

Compilation of reinforced carbon-carbon transatlantic abort landing arc jet test results

This document consists of the entire test database generated to support the Reinforced Carbon-Carbon Transatlantic Abort Landing Study. RCC components used for orbiter nose cap and wing leading edge thermal protection were originally designed to have a multi-mission entry capability of 2800 F. Increased orbiter range capability required a predicted increase in excess of 3300 F. Three test series were conducted. Test series #1 used ENKA-based RCC specimens coated with silicon carbide, treated with tetraethyl orthosilicate, sealed with Type A surface enhancement, and tested at 3000-3400 F with surface pressure of 60-101 psf. Series #2 used ENKA- or AVTEX-based RCC, with and without silicon carbide, Type A or double Type AA surface enhancement, all impregnated with TEOS, and at temperatures from 1440-3350 F with pressures from 100-350 psf. Series #3 tested ENKA-based RCC, with and without silicon carbide coating. No specimens were treated with TEOS or sealed with Type A. Surface temperatures ranged from 2690-3440 F and pressures ranged from 313-400 psf. These combined test results provided the database for establishing RCC material single-mission-limit temperature and developing surface recession correlations used to predict mass loss for abort conditions.

Milhoan, James D.↗
NASA NTRS1993

Comment on 'The remote sensing of ocean primary productivity - Use of a new data compilation to test satellite algorithms' by William Balch et al

Various conclusions by Balch et al. (1992) about the current state of modeling primary production in the sea (lack of improvement in primary production models, since 1957, utility of analytical models, and merits or weaknesses of complex models) are commented on. It is argued that since they are based on a false premise, these conclusions are not robust, and that the approach used by Balch et al. (the model of Platt and Sathyendranath, 1988) was inadequate for the question they set out to address. The present criticism is based mainly on the issue of whether implementation was correct with respect to parameter selection. It is concluded that the findings of Balch et al. with respect to the model of Platt and Sathyendranath is unreliable. Balch replies that satellite-derived estimates of primary production should be compared directly to that measured in situ in as many regions as possible. This will provide a first-order estimate of the magnitude of the error involved in estimating primary production from space.

Platt, Trevor↗
NASA NTRS1994

Indices of refraction for the HITRAN compilation

Indices of refraction of sulfuric acid solutions, water, and ice, which will become part of the HITRAN database, are discussed. Representative calculations are presented for the sulfate aerosol, to illustrate the broadband spectral features of i.r. aerosol extinction spectra. Values of the sulfuric acid mass density are used in an application of the Lorentz-Lorenz equation, which is used to estimate the sensitivity of extinction coefficients to temperature dependent refractive indices.

Massie, S. T.↗