SEARCH · Search NASA
Results for “Composite Structures”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High‐throughput methods using composition and structure spread libraries
Not Available
Interrelatedness of Fe composition on structural and magnetic properties in Fe-doped SrRuO[subscript 3] thin films
Abstract not provided
Influence of ionic-liquid incubation temperature on changes in cellulose structure, biomass composition, and enzymatic digestibility
Abstract not provided
Structure and composition of nanometer-sized nitrides in a creep resistant cast austenitic alloy
The microstructure of a new and improved high-temperature creep-resistant cast austenitic alloy, CF8C-Plus, was characterized after creep-rupture testing at 1023 K (750 C) and 100 MPa. Microstructures were investigated by detailed scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy (EDS). Principal component analysis of EDS spectrum images was used to examine the complex precipitate morphology. Thermodynamic modeling was performed to predict equilibrium phases in this alloy as well as the compositions of these phases at relevant temperatures. The improved high-temperature creep strength of CF8C-Plus over its predecessor CF8C is suggested to be due to the modified microstructure and phase stability in the alloy, including the absence of {delta}-ferrite in the as-cast condition and the development of a stable, slow-growing precipitation hardening nitride phase - the tetragonal Z-phase - which has not been observed before in cast austenitic stainless steels.
Non-destructive Compositional and Structural Analysis of Early Chinese Currencies
Not provided.
Composition and Structure of Sugarcane Cell Wall Polysaccharides: Implications for Second-Generation Bioethanol Production
Explore the source record for details and available documents.
Structural and compositional analysis of solid oxide fuel cell electrolytes using transmission electron microscopy
Explore the source record for details and available documents.
Population-level approaches reveal novel aspects of lignin biosynthesis, content, composition and structure
Not Available
Composition and structural aspects of naturally occurring ferrihydrite
Abstract not provided
Enabling thermal energy storage in structural cementitious composites with a novel phase change material microcapsule featuring an inorganic shell and a bio-inspired silica coating
Phase change material (PCM) microcapsules offer a promising approach for integrating PCM into building materials for efficient thermal energy storage. Here, this study presents the development of a novel PCM microcapsule specifically designed for incorporation into cementitious materials. The microcapsule consists of a low-cost PCM core derived from vegetable oil by-products and a durable inorganic shell made from cenosphere, a hollow fly ash generated from coal burning power plants. A novel process is developed to apply a silica coating to these cenosphere-based PCM microcapsules (CPCM), resulting in bioinspired-silica-coated CPCM microcapsules (BCPCM). This coating process draws inspiration from marine microorganism-based silica production and utilizes low-cost sodium silicate as a precursor, enabling eco-friendly and cost-effective manufacturing at ambient temperature and mild pH conditions. The morphology, chemical stability, and thermal properties of the BCPCM along with its thermo-mechanical performance in cementitious composites were comprehensively analyzed. Experimental results demonstrate successful silica deposition on BCPCM, leading to enhanced latent heat properties of the produced BCPCM. With the silica coating, BCPCM exhibits a 50 °C delay in thermal decomposition compared to CPCM, enhancing fire resistance and preventing premature PCM leakage of the microcapsule. The bioinspired silica coating effectively restores over 10% of the strength loss for each percent increase in CPCM incorporated into the mortar. The thermal performance experiments reveal that increasing the BCPCM content reduces temperature peaks and rates of temperature increase, indicating an improved capacity for thermal energy storage. This new PCM microcapsule provides a cost-effective solution to integrate thermal energy storage to cementitious material, as evidenced that over 30% of aggregates (in volume) can be replaced by the microcapsule without a drastic loss of strength.
Analysis of char structure and composition from microwave and conventional pyrolysis/gasification of low and middle rank coals
Not Available
Properties of impurity-bearing ferrihydrite II: Insights into the surface structure and composition of pure, Al- and Si-bearing ferrihydrite from Zn(II) sorption experiments and Zn K-edge X-ray absorption spectroscopy
Explore the source record for details and available documents.
Temperature and composition dependent structural investigation of the defect perovskite series Sr{sub 1-x}Ti{sub 1-2x}Nb{sub 2x}O{sub 3}, 0{<=}x{<=}0.2
The crystal structure of the defect perovskite series Sr{sub 1-x}Ti{sub 1-2x}Nb{sub 2x}O{sub 3} has been investigated over a range of temperatures using high-resolution synchrotron X-ray diffraction, neutron diffraction and electron diffraction. Three distinct regions were observed: 0<x{<=}0.125 was a solid solution of Sr{sub 1-x}Ti{sub 1-2x}Nb{sub 2x}O{sub 3} with minor SrTiO{sub 3} intergrowth, 0.125<x{<=}0.2 was a pure Sr{sub 1-x}Ti{sub 1-2x}Nb{sub 2x}O{sub 3} solid solution adopting the cubic perovskite type structure (Pm3-bar m) and for x>0.2 Sr{sub 0.8}Ti{sub 0.6}Nb{sub 0.4}O{sub 3} and Sr{sub 3}TiNb{sub 4}O{sub 15} formed a two phase region. The cubic structure for Sr{sub 0.8}Ti{sub 0.6}Nb{sub 0.4}O{sub 3} was stable over the temperature range 90-1248 K and the thermal expansion co-efficient was determined to be 8.72(9)x10{sup -6} K{sup -1}. Electron diffraction studies revealed diffuse scattering due to local scale Ti/Nb displacements and slightly enhanced octahedral rotations that did not lead to long range order. The octahedral rotations were observed to 'lock-in' at temperatures below {approx}75 K resulting in a tetragonal structure (I4/mcm) with anti-phase octahedral tilting about the c-axis. - Graphical abstract: Change in cell dimensions for the series Sr{sub 1-x}Ti{sub 1-2x}Nb{sub 2x}O{sub 3}, 0{<=}x{<=}0.2.
Multilayer polymer/zeolite Y composite membrane structure for CO2 capture from flue gas
Not Available