Search NASA⌕ Search

SEARCH · Search NASA

Results for “D LAYER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Effects of erodant particle shape and various heat treatments on erosion resistance of plain carbon steel

Erosion tests were conducted on 1045 steel samples which had been subjected to different heat treatments. The weight of material removed upon erosion with glass beads and crushed glass was measured. The data show that there is no correlation between hardness and erosion resistance. The erosion rate was strongly dependent on the shape of erodant particles, being an order of magnitude higher for erosion with crushed glass than with glass beads. Heat treatment had a profound effect on the erosion resistance when the erodant particles were glass beads but little or no effect when the particles were crushed glass. It is thus concluded that different mechanisms of material removal are involved with these two erodants. This conclusion is supported by the surface morphology of annealed 1045 steel samples which had been eroded by these two types of erodant particles. SEM micrographs of the eroded surfaces show that for erosion with glass beads it is deformation induced fracture of surface layers.

Salik, J.↗
NASA NTRS1980

Theoretical profiles for the 1-0 S/1/ H2 line in carbon stars

The spectra of carbon stars have been synthesized from the models of Querci, Querci, and Tsuji and Querci and Querci in the region of the 1-0 S(1) vibration-rotation quadrupole line of H2. The line is shown to be sufficiently strong to be seen against the numerous lines of the CN red system for models with effective temperatures less than about 2700 K. The usefulness of the line as a diagnostic of the atmosphere is discussed, and a comparison with the measured spectra of UU Aur and S Cep is made. It is concluded that the outer atmospheric layers of carbon stars are significantly warmer than the models predict. An additional opacity source in the outer layers is required.

Goorvitch, D.↗
NASA NTRS1980

Three-dimensional stability of growing boundary layers

A theory is developed for the linear stability of three-dimensional growing boundary layers. The method of multiple scales is used to derive partial-differential equations describing the temporal and spatial evolution of the complex amplitudes and wavenumbers of the disturbances. In general, these equations are elliptic unless certain conditions are satisfied. For a monochromatic disturbance, these conditions demand that the ratio of the components of the complex group velocity be real and thereby relate the direction of growth of the disturbance to the disturbance wave angle. For a nongrowing boundary layer, this condition reduces to d-alpha/d-beta being real, in agreement with the result obtained by using the saddle-point method. For a wavepacket, these conditions demand that the components of the group velocity be real.

Nayfeh, A. H.↗
NASA NTRS1982

Improvement of Rocket Engine Plume Analysis Techniques

A nozzle plume flow field code was developed. The RAMP code which was chosen as the basic code is of modular construction and has the following capabilities: two phase with two phase transonic solution; a two phase, reacting gas (chemical equilibrium reaction kinetics), supersonic inviscid nozzle/plume solution; and is operational for inviscid solutions at both high and low altitudes. The following capabilities were added to the code: a direct interface with JANNAF SPF code; shock capturing finite difference numerical operator; two phase, equilibrium/frozen, boundary layer analysis; a variable oxidizer to fuel ratio transonic solution; an improved two phase transonic solution; and a two phase real gas semiempirical nozzle boundary layer expansion.

Smith, S. D.↗
NASA NTRS1981

Theoretical and lidar studies of the density response of the mesospheric sodium layer to gravity wave perturbations

The density response of atmospheric layers to gravity waves is developed in two forms, an exact solution and a perturbation series solution. The degree of nonlinearity in the layer density response is described by the series solution whereas the exact solution gives insight into the nature of the responses. Density perturbation in an atmospheric layer are shown to be substantially greater than the atmospheric density perturbation associated with the propagation of a gravity wave. Because of the density gradients present in atmospheric layers, interesting effects were observed such as a phase reversal in the linear layer response which occurs near the layer peak. Once the layer response is understood, the sodium layer can be used as a tracer of atmospheric wave motions. A two dimensional digital signal processing technique was developed. Both spatial and temporal filtering are utilized to enhance the resolution by decreasing shot noise by more han 10 dB. Many of the features associated with a layer density response to gravity waves were observed in high resolution density profiles of the mesospheric sodium layer. These include nonlinearities as well as the phase reversal in the linear layer response.

Shelton, J. D.↗
NASA NTRS1982

Processed-induced defects in EFG ribbons

The defect structure of processed edge defined film-fed growth (EFG) silicon ribbons was studied using a variety of electron microscopic techniques. Comparison between the present results and previous studies on as-grown ribbons has shown that solar cell processing introduces additional defects into the ribbons. The creation of point defects during high temperature phosphorus diffusion induces dislocation climb, resulting in the formation of dislocation helices in the diffused layer.

Cunningham, B.↗
NASA NTRS1981

Screenable all-metal solar cell electrodes of nickel and copper

Screenable thick film solar cell electrodes are made using the all-metal electrode system, which eliminates the commonly used glass frit and substitutes an oxide scavenger such as silver fluoride. The low temperature firing copper metal systems give good results on solar cells obtaining cell efficiencies of 13% AM1, and adhering sintered structures are demonstrated with nickel systems. The potential effect of copper upon cell performance at elevated temperatures over long periods of time is determined, and it is found that the formation of a copper-silicon eutectic at 550 C produces needle-like structures with broad bases on the silicon, extending into and occasionally through the metallization layer.

Ross, B.↗
NASA NTRS1982

Excited waves in shear layers

The generation of instability waves in free shear layers is investigated. The model assumes an infinitesimally thin shear layer shed from a semi-infinite plate which is exposed to sound excitation. The acoustical shear layer excitation by a source further away from the plate edge in the downstream direction is very weak while upstream from the plate edge the excitation is relatively efficient. A special solution is given for the source at the plate edge. The theory is then extended to two streams on both sides of the shear layer having different velocities and densities. Furthermore, the excitation of a shear layer in a channel is calculated. A reference quantity is found for the magnitude of the excited instability waves. For a comparison with measurements, numerical computations of the velocity field outside the shear layer were carried out.

Bechert, D. W.↗
NASA NTRS1983

Balloon-borne remote sensing of stratospheric constituents

Data on species of interest in the photochemistry of the ozone layer obtained from balloon flights are presented. The flights made use of remote-sensing instruments that took measurements in the wavelength region from the ultraviolet to millimeter wavelengths. Most of the data were obtained with instruments whose readings were in the midinfrared wavelengths. Descriptions are given of the two techniques generally used in this type of research, namely solar absorption and atmospheric emission. The promise that these techniques hold for providing data on the photochemistry of the ozone layer is discussed.

Murcray, D. G.↗
NASA NTRS1984

Stability of the laminar boundary layer in a streamwise corner

The stability of viscous, incompressible flow along a streamwise corner, often called the corner boundary layer problem is examined. The semi-infinite boundary value problem satisfied by small amplitude disturbances in the "bending boundary layer' region is obtained. The mean secondary flow induced by the corner exhibits a flow reversal in this region. Uniformly valid "first approximations' to solutions of the governing differential equations are derived. Uniformity at infinity is achieved by a suitable choice of the large parameter and use of an approximate Langer variable. Approximations to solutions of balanced type have a phase shift across the critical layer which is associated with instabilities in the case of two dimensional boundary layer profiles.

Lakin, W. D.↗
NASA NTRS1983

The unique cometary nebula Parsamian 13

Parsamian 13 is found to be a cometary nebula, with a deeply embedded star suffering strong absorption by silicate grains. A feature near 2.7 microns, attributed to absorption by terminal OH groups, may represent the first detection in an astrophysical environment of water ice grains diluted by another molecule, for example by CO. The bolometric luminosity suggests that this star is either an extremely young T Tauri star or an evolved low-mass star, now a red giant, high on its convective track. Most unusual is the presence of cold (50 K) TiO gas in sufficient abundance to show in absorption in the optical and very near-infrared regions; this material probably represents very recently expelled photospheric layers.

Cohen, M.↗
NASA NTRS1984

Computer graphic visualization of orbiter lower surface boundary-layer transition

Computer graphic techniques are applied to the processing of Shuttle Orbiter flight data in order to create a visual presentation of the extent and movement of the boundary-layer transition front over the orbiter lower surface during entry. Flight-measured surface temperature-time histories define the onset and completion of the boundary-layer transition process at any measurement location. The locus of points which define the spatial position of the boundary-layer transition front on the orbiter planform is plotted at each discrete time for which flight data are available. Displaying these images sequentially in real-time results in an animated simulation of the in-flight boundary-layer transition process.

Throckmorton, D. A.↗
NASA NTRS1985

Increased voltage photovoltaic cell

A photovoltaic cell, such as a solar cell, is provided which has a higher output voltage than prior cells. The improved cell includes a substrate of doped silicon, a first layer of silicon disposed on the substrate and having opposite doping, and a second layer of silicon carbide disposed on the first layer. The silicon carbide preferably has the same type of doping as the first layer.

Ross, B.↗
NASA NTRS1984

An improved thermal model for cometary nuclei

A thermal model for cometary nuclei is presented and used in comparisons of predictions with data on Halley's comet. The model considers the surface boundary conditions and heat diffusion equations, the sublimation rate of ice, the energy balance, and the dust production rate. Projections were made for the Halley nucleus over 18 latitudes from -85 to +85 deg, from 185 d before to 110 d after perihelion, and in 20 layers of its surface in 1.3 cm increments. Sublimation is predicted to increase by a factor of 2.2 every orbit, thereby allowing 320 returns for a nucleus with a coma, 710 returns with a bare ice nucleus. The gas production during the Giotto intercept at 0.9 AU will be 4.4 x 10 to the 29th molecules/sec, close to an estimate made during the 1910 return.

Weissman, P. R.↗
NASA NTRS1986

Low Reynold's number boundary layers in a disturbed environment

Studies of flat plate boundary layer development were made in a low speed wind tunnel at turbulence levels from 2%to 7%. Only transitional and turbulent flows were observed in the range 280 Re sub theta 700. The mean turbulent velocity profiles display law-of-the-wall behavior but have negligible wake component. The u' disturbance profiles compare well with those of other experiments, the peak value of u'/u sub tau being about 2.5. The effect of free-stream turbulence level on turbulent skin friction can be nicely correlated with those of other investigations on a plot of u sub e/u sub tau versus Re sub theta. A discussion on the u' spectra for the transitional boundary-layers is presented.

Paik, D. K.↗
NASA NTRS1986

The resolved layer of a collisionless, high beta, supercritical, quasi-perpendicular shock wave. I - Rankine-Hugoniot geometry, currents, and stationarity

Data collected by the ISEE dual-spacecraft mission (on November 7, 1977) on a slowly moving, supercritical, high-beta, quasi-perpendicular bow shock are presented, and the local geometry, spatial scales, and stationarity of this shock wave are assessed in a self-consistent Rankine-Hugoniot-constrained frame of reference. Included are spatial profiles of the ac and dc magnetic and electric fields, electron and proton fluid velocities, current densities, electron and proton number densities, temperatures, pressures, and partial densities of the reflected protons. The observed layer profile is shown to be nearly phase standing and one-dimensional in a Rankine-Hugoniot frame, empirically determined by the magnetofluid parameters outside the layer proper.

Scudder, J. D.↗
NASA NTRS1988

The formation of filamentary sublimate residues (FSR) from mineral grains

The significant interparticle forces observed between solar system dust grains upon desorption or sublimation of excess volatiles in simulated Martian or cometary environments are presently investigated, in order to more precisely define these mechanisms and to simulate the types of deposits thereby formed. Some classes of phyllosilicate mineral grains are noted to bond together to form a highly porous filamentary sublimate residue (FSR) exhibiting an exceptionally high tensile strength for its density; this may be important in its control of erosion and sublimation in Martian and cometary environments. It is concluded that FSR formation from clean mineral grains in water ice may be important in the formation of the Martian polar layered terrain.

Storrs, A. D.↗
NASA NTRS1988

The nonlinear breakup of a magnetic layer - Instability to interchange modes

Motivated by considerations of the solar toroidal magnetic field, the behavior of a layer of uniform magnetic field embedded in a convectively stable atmosphere is studied. Since the field can support extra mass, such a configuration is top-heavy and thus instabilities of the Rayleigh-Taylor type can occur. For both static and rotating basic states, the evolution of the interchange modes (no bending of the field lines) is followed by integrating numerically the nonlinear compressible MHD equations. The initial Rayleigh-Taylor instability of the magnetic field gives rise to strong shearing motions, thereby exciting secondary Kelvin-Helmholtz instabilities which wrap the gas into regions of intense vorticity. The subsequent motions are determined primarily by the strong interactions between vortices which are responsible for the rapid disruption of the magnetic layer.

Cattaneo, F.↗