A compilation of spacecraft loads data from four Titan Centaur launch vehicle flights. Volume 5, part 3: Time history plots
For abstract, see N77-28193.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
For abstract, see N77-28193.
The relationship between spectral radiance and plant canopy biomass was studied in wetlands. Spectroradiometer data was gathered on Thematic Mapper wavebands 3, 4, and 5, and correlated with canopy and edaphic factors determined by harvesting. The relationship between spectral radiance and plant canopy biomass for major salt and brackish canopy types was determined. Algorithms were developed for biomass measurement in mangrove swamps. The influence of latitudinal variability in canopy structure on biomass assessment of selected plants was investigated. Brackish marsh biomass estimates were obtained from low altitude aircraft and compared with ground measurements. Annual net aerial primary productivity estimates computed from spectral radiance data were compiled for a Spartina alterniflora marsh. Spectral radiance data were expressed as vegetation or infrared index values. Biomass estimates computed from models were in close agreement with biomass estimates determined from harvests.
A problem for the impact hypothesis for the Cretaceous-Tertiary (K-T) mass extinction is the apparent absence of an identifiable impact site. The Manson Impact Structure is a candidate because it is the largest recognized in the U.S.; it is relatively close to the largest and most abundant shocked quartz grains found at the K-T boundary; and its age is indistinguishable from that of the K-T boundary based on paleontological evidence, fission track dates, and preliminary Ar-40/Ar-39 measurements. The region of northwest central Iowa containing the Manson Impact Structure is covered by Quaternary glacial deposits underlain by Phanerozoic sedimentary rocks (mostly flat-lying carbonates) and Proterozoic red clastic, metamorphic, volcanic, and plutonic rocks. In a circular area about 22 miles (35 km) in diameter around Manson, Iowa, this normal sequence is absent or disturbed and near the center of the disturbed area granitic basement rocks have been uplifted some 20,000 ft (6000m). Attention was drawn to Manson initially by the unusual quality of the groundwater there. Within the structure three roughly concentric zones of rock associations have been identified: (1) displaced strata; (2) completely disrupted strata, and igneous and metamorphic rocks. Manson was established as an impact structure based on its circular shape, its central uplift, and the presence of shocked quartz within the granitic central uplift. A gravity survey identified locations of low-density brecciated rocks and high-density uplifted crystalline rocks, but the outer boundary of the structure could not be established. Aeromagnetic and ground magnetic surveys showed locations and depths of shallowly buried crystalline rock and the locations of faults. A refraction seismic survey identified the crystalline central uplift, determined that the average elevation of bedrock is 70 ft (20 m) higher outside the structure than within, and was used to map the bedrock topography within the structure. A connection between the Manson impact and the K-T boundary may be established or refuted through study of the impact energy, the impact time, and composition of host rock, possible impactors, and impact melts.
The machine-readable version of the catalog, as it is currently being distributed from the Astronomical Data Center, is described. The catalog is a compilation of data for 842 sources detected with the U.S. Naval Research Laboratory Large Area Sky Survey Experiment flown aboard the HEAO 1 satellite. The data include source identifications, positions, error boxes, mean X-ray intensities, and cross identifications to other source designations.
This report is a compilation of geotechnical data presented as plots for each active instrument installed in the underground at the Waste Isolation Pilot Plant (WIPP) through June 30, 2007. A summary of the geotechnical analyses that were performed using the enclosed data is provided in Volume 1 of the Geotechnical Analysis Report (GAR).
This report is a compilation of geotechnical data presented as plots for each active instrument installed in the underground at the Waste Isolation Pilot Plant (WIPP) through June 30, 2008. A summary of the geotechnical analyses that were performed using the enclosed data is provided in Volume 1 of the Geotechnical Analysis Report (GAR).
This report is a compilation of geotechnical data presented as plots for each active instrument installed in the underground at the Waste Isolation Pilot Plant (WIPP) through June 30, 2009. A summary of the geotechnical analyses that were performed using the enclosed data is provided in Volume 1 of the Geotechnical Analysis Report (GAR).
From 2010 to 2012, 35 ciguatera fish poisoning (CFP) events involving 87 individuals who consumed locally-caught fish were reported in Guadeloupe (French West Indies). For 12 of these events, the presence of ciguatoxins (CTXs) was indicated in meal remnants and in uncooked fish by the mouse bioassay (MBA). Caribbean ciguatoxins (C-CTXs) were confirmed by liquid chromatography–tandem mass spectrometry (LC–MS/MS) analysis. Using a cell-based assay (CBA), and the only available standard Pacific ciguatoxin-1 (P-CTX-1), the lowest toxins level detected in fish samples causing CFP was 0.022 µg P-CTX-1 equivalent (eq.)·kg{sup −1} fish. Epidemiological and consumption data were compiled for most of the individuals afflicted, and complete data for establishing the lowest observable adverse effects level (LOAEL) were obtained from 8 CFP events involving 21 individuals. Based on toxin intakes, the LOAEL was estimated at 4.2 ng P-CTX-1 eq./individual corresponding to 48.4 pg P-CTX-1 eq. kg{sup −1} body weight (bw). Although based on limited data, these results are consistent with the conclusions of the European Food Safety Authority (EFSA) opinion which indicates that a level of 0.01 µg P-CTX-1 eq. kg{sup −1} fish, regardless of source, should not exert effects in sensitive individuals when consuming a single meal. The calculated LOAEL is also consistent with the U.S. Food and Drug Administration guidance levels for CTXs (0.1 µg C-CTX-1 eq. kg{sup −1} and 0.01 µg P-CTX-1 eq. kg{sup −1} fish). - Highlights: • We report on an epidemiological study on Ciguatera events in the French West Indies. • The collection of consumption data allows for the first time the LOAEL determination. • The LOAEL for ciguatoxins was established at 48.4 pg P-CTX-1 eq. kg{sup −1} bw. • LC–MS/MS provided structural confirmation of C-CTX1 in two suspected samples • Neuro-2A CBA is suitable for assessing composite toxicity levels in fish samples.
This short summary of previously published data was compiled to provide the actual in-situ gauge data to allow modeling of these experiments. Although the purpose here is to fulfill a deliverable for a JOWOG 9 Focused Exchange (09-006), it is just as applicable to other exchanges as well. The TATB materials described here are Ultra Fine (UF) TATB and LX-17 (92.5% TATB and 7.5% Kel-F by weight), with the details of the experiments provided in the prior publications. The data is provided in the appendices of the document, but will be provided electronically as text files due to being amenable to importing into the code in that manner for comparison.
Viking Infrared Thermal Mapper (IRTM) high resolution (2 to 5 km) data were compiled and compared to Viking Visual Imaging Subsystem (VIS) data and available 1:5M geologic maps for several Martian channels including Dao, Harmakhis, Mangala, Shalbatana, and Simud Valles in an effort to determine the surface characteristics and the processes active during and after the formation of these channels. Results show a dominance of aeolian processes active in and around the channels. These processes have left materials thick enough to mask any genuine channel deposits. Results also indicate that very comparable Martian channels and their surrounding terrain are blanketed by deposits which are homogeneous in their thermal inertia values. However, optimum IRTM data does not cover the entire Martian surface and because local deposits of high thermal inertia material may not be large enough in areal extent or may be in an unfavorable location on the planet, a high resolution data track may not always occur over these deposits. Therefore, aeolian processes may be even more active than the IRTM data tracts can always show.
High-latitude terrestrial ecosystems are key components in the global carbon cycle. The Northern Circumpolar Soil Carbon Database (NCSCD) was developed to quantify stocks of soil organic carbon (SOC) in the northern circumpolar permafrost region (a total area of 18.7 × 10 6 km 2 ). The NCSCD is a geographical information system (GIS) data set that has been constructed using harmonized regional soil classification maps together with pedon data from the northern permafrost region. Previously, the NCSCD has been used to calculate SOC storage to the reference depths 0–30 cm and 0–100 cm (based on 1778 pedons). It has been shown that soils of the northern circumpolar permafrost region also contain significant quantities of SOC in the 100–300 cm depth range, but there has been no circumpolar compilation of pedon data to quantify this deeper SOC pool and there are no spatially distributed estimates of SOC storage below 100 cm depth in this region. Here we describe the synthesis of an updated pedon data set for SOC storage (kg C m -2 ) in deep soils of the northern circumpolar permafrost regions, with separate data sets for the 100–200 cm (524 pedons) and 200–300 cm (356 pedons) depth ranges. These pedons have been grouped into the North American and Eurasian sectors and the mean SOC storage for different soil taxa (subdivided into Gelisols including the sub-orders Histels, Turbels, Orthels, permafrost-free Histosols, and permafrost-free mineral soil orders) has been added to the updated NCSCDv2. The updated version of the data set is freely available online in different file formats and spatial resolutions that enable spatially explicit applications in GIS mapping and terrestrial ecosystem models. While this newly compiled data set adds to our knowledge of SOC in the 100–300 cm depth range, it also reveals that large uncertainties remain. In conclusion, identified data gaps include spatial coverage of deep (> 100 cm) pedons in many regions as well as the spatial extent of areas with thin soils overlying bedrock and the quantity and distribution of massive ground ice.
There are no author-identified significant results in this report. Brief summaries are presented of accomplishments by the state of Alabama in the areas of: (1) investigation of environmental factors; (2) land use compilation; (3) data processing for land use compilation; (4) photo-reproduction and unsupervised land use classification from digital tape; (5) data collection buoys; and (6) activities of the Geological Survey of Alabama.
This data upload includes a compilation of experiments for quantifying uranium adsorption onto quartz. The provided .csv file has been compiled from the literature in a findable, accessible, interoperable, reusable (FAIR) data format. This was accomplished using the Lawrence Livermore National Laboratory Surface Complexation Database Converter (SCDC) code written in the R programming language (free licensing available at https://ipo.llnl.gov/technologies/software/llnl-surface-complexation-database-converter-scdc). This constitutes all current data compiled on uranium-quartz interactions in the L-SCIE (LLNL Surface Complexation/Ion Exchange) database (as of 02/28/2022). This data was used to develop surface complexation models that fit the global community dataset (https://doi.org/10.1021/acs.est.1c07109). The FAIR-formatted dataset also enables the implementation of alternative machine-learning approaches that can be explored in the future.
We present the Tool for Astrophysical Data Analysis (TA-DA), a new software aimed to greatly simplify and improve the analysis of stellar photometric data in comparison with theoretical models, and allow the derivation of stellar parameters from multi-band photometry. Its flexibility allows one to address a number of such problems: from the interpolation of stellar models, or sets of stellar physical parameters in general, to the computation of synthetic photometry in arbitrary filters or units; from the analysis of observed color-magnitude diagrams to a Bayesian derivation of stellar parameters (and extinction) based on multi-band data. TA-DA is available as a pre-compiled Interactive Data Language widget-based application; its graphical user interface makes it considerably user-friendly. In this paper, we describe the software and its functionalities.
A computerized data base of crack growth properties of materials was developed for use in fracture control analysis of rocket engine components and other NASA space hardware. The software system has files of basic crack growth rate data, other fracture mechanics material properties such as fracture toughness and environmental crack growth threshold values, and plotting and fitting routines for deriving material properties for use in fracture control analysis. An extensive amount of data was collected and entered, and work is continuing on compiling additional data. The data base and software codes are useful both for fracture control analysis and for evaluation or development of improved crack growth theories.
Recent developments in advanced monitoring systems used in conjunction with tracking structural integrity of rotary-wing aircraft are explained. The paper describes: (1) an overview of rotary-wing aircraft flight parameters that are critical to the aircraft loading conditions and each parameter's specific requirements in terms of data collection and processing; (2) description of the monitoring system and its functions used in a survey of rotary-wing aircraft; and (3) description of the method of analysis used for the data. The paper presents a newly-developed method in compiling flight data. The method utilizes the maneuver sequence of events in several pre-identified flight conditions to describe various flight parameters at three specific weight ranges.
Using published data on magnetic fields, radii, masses, and rotation, we have compiled a data set of magnetic moments mu and angular momenta L for stars and planets. In our subsample of hotter stars (classes A, B, and O), there are 171 objects. In the subsample of cooler stars (classes F, G, K, and M), there are 54 objects. We include 33 white dwarfs, of which 19 are in cataclysmic variables. The pulsar subsample contains 32 pulsars in binaries and 429 isolated pulsars. Som subsamples exhibit significant empirical correlations between log mu and log L. For the hot and cool stars, the correlations are positive. However, the hot-star correlation is significantly shallower than for the cool stars. In the solar system subsample, the correlation has essentially the same slope as for the cool stars, although the magnetic moments are two to three orders of magnitude smaller for the solar system objects at a given L value. For isolated white dwarfs, the correlations are weak or absent. Pulsars and white dwarfs in close binaries show strong negative correlations: the results are quantitatively consistent with magnetically enforced synchronism with the orbital period. When we consider the centers of gravity of the different subsamples of objects, a significant positive correlation appears between log mu and log L.
These data were derived from the original Digital Elevation Models (DEMs) produced by the Boreal Ecosystem-Atmosphere Study (BOREAS) Hydrology (HYD)-8 team. The original DEMs were in the Universal Transverse Mercator (UTM) projection, while this product is projected in the Albers Equal-Area Conic (AEAC) projection. The pixel size of the data is 100 meters, which is appropriate for the 1:50,000-scale contours from which the DEMs were made. The original data were compiled from information available in the 1970s and 1980s. This data set covers the two Modeling Sub-Areas (MSAs) that are contained within the Southern Study Area (SSA) and the Northern Study Area (NSA). The data are stored in binary, image format files. The DEM data over the NSA-MSA and SSA-MSA in the AEAC projection are available from the Earth Observing System Data and Information System (EOSDIS) Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC). The data files are available on a CD-ROM (see document number 20010000884).