Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Movement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Surface Movement Incidents Reported to the NASA Aviation Safety Reporting System

Increasing numbers of aircraft are operating on the surface of airports throughout the world. Airport operations are forecast to grow by more that 50%, by the year 2005. Airport surface movement traffic would therefore be expected to become increasingly congested. Safety of these surface operations will become a focus as airport capacity planning efforts proceed toward the future. Several past events highlight the prevailing risks experienced while moving aircraft during ground operations on runways, taxiways, and other areas at terminal, gates, and ramps. The 1994 St. Louis accident between a taxiing Cessna crossing an active runway and colliding with a landing MD-80 emphasizes the importance of a fail-safe system for airport operations. The following study explores reports of incidents occurring on an airport surface that did not escalate to an accident event. The Aviation Safety Reporting System has collected data on surface movement incidents since 1976. This study sampled the reporting data from June, 1993 through June, 1994. The coding of the data was accomplished in several categories. The categories include location of airport, phase of ground operation, weather /lighting conditions, ground conflicts, flight crew characteristics, human factor considerations, and airport environment. These comparisons and distributions of variables contributing to surface movement incidents can be invaluable to future airport planning, accident prevention efforts, and system-wide improvements.

Connell, Linda J.↗
NASA NTRS1997

AXAF Coordinate Transformation at XRCF

Coordinate transformation between focal plane and detector pixel systems must be handled carefully at the X-ray Calibration Facility (XRCF) as it will be during flight. The High Resolution Mirror Assembly (HRMA) X-ray Detection System (HXDS) stage dithers, and the five-axis mount (FAM) attachment points underwent various types of motion during testing. At the XRCF when the FAM moved, the Science Instrument Module (SIM) travel direction was not necessarily aligned with the mirror axis motion, and, in addition, an arbitrary position offset had to be calibrated. Misalignment from the mirror axis was assessed by measuring its displacement from the boresight configuration of the default FAM frame, and the HXDS stage was monitored for motion from the default FAM reference point. Mirror position, prescribed in a mirror modal coordinate system, was measured in HRMA pitch and yaw axes. Prior to corrections for dithering and FAM movement, the coordinate data at XRCF also had to be corrected for possible misalignments of the mirror mount relative to XRCF and the default FAM axes due to the movement of the FAM feet. Those misalignments were processed in terms of yaw-pitch-roll Euler angles in the mirror nodal coordinate, and in the default FAM frame, respectively. An AXAF Science Center (ASC) coordinate library, pixlib, has been built to support these coordinate transformations and was used during x-ray calibration at the George C. Marshall Space Flight Center, Huntsville, AL. The design and implementation of this library will be discussed.

He, Helen↗
NASA NTRS1978

Sea level data and techniques for detecting vertical crustal movements

An attempt is made to survey problems, requirements, and the outlook for the future in the study of sea level time series so as to determine the relative movement of land and sea levels. The basic aim is to eliminate from the record the contributions from whatever marine dynamic phenomena respond to treatment, allowing the secular element to be identified with optimum clarity. Nevertheless the concept of sea level perturbation varies according to regional experience. The recent work of the Permanent Service for Mean Sea Level helps to eliminate geodetic noise from the series and makes it possible, perhaps, to treat the global mean sea level data bank so as to define eustatic changes in ocean volume which, in the present context, may be regarded as the final goal, allowing the identification of vertical crustal motion itself.

Lennon, G. W.↗
NASA NTRS1992

Cloud fraction, layer, and direction of movement results from sky cameras during the FIRE IFO, Coffeyville, Kansas, experiment for the period Nov. 12 through Dec. 9, 1991

Tables and figures are presented which show local site observations of cloud fractions, the number of cloud layers, direction of movement, and precipitation data collected during the FIRE (First ISCCP Regional Experiment) Phase 2 Cirrus Intensive Field Observations (IFO) conducted in Coffeyville, Kansas during November and December, 1991. Selected data are also presented at the times of the TIROS Operational Vertical Sounder (TOVS) satellite overpass. Several major scientific projects have used surface-based observations of clouds to compare directly with those being observed from satellites. Characterizing the physical properties of clouds is extremely useful in obtaining a more accurate analysis of the effect of clouds and their movements on weather and climate. It is the purpose of this paper to report data collected during the FIRE Phase 2 IFO experiment and to provide a brief history of such a surface-based system and the technical information required for recording local cloud parameters.

Gerald C Purgold↗
DOE OSTI2023

Adaptive cache management based on programming model information

A processing system selectively allocates space to store a group of one or more cache lines at a cache level of a cache hierarchy having a plurality of cache levels based on memory access patterns of a software application executing at the processing system. The processing system generates bit vectors indicating which cache levels are to allocate space to store groups of one or more cache lines based on the memory access patterns, which are derived from data granularity and movement information. Based on the bit vectors, the processing system provides hints to the cache hierarchy indicating the lowest cache level that can exploit the reuse potential for a particular data.

Na, Weon Taek↗
NASA NTRS1984

Amyloplast movement in living statocytes

Much evidence implicates amyloplast movement in plant graviperception. How this signal is transduced into a differential growth response is not known. Studies using fixed tissue are useful for deriving mean sedimentation rates, but cannot yield data on: the movement of individual amyloplasts, the role of cytoplasmic streaming, and the initial dynamic events occurring during the presentation time. These limitations were overcome by examining living tissue sections with a horizontally mounted microscope connected to a video camera and recorder. The kinetics of the early response to reorientation are consistent with the hypothesis that amyloplasts act by contact with a sensitive surface near the lower wall and indicate that cytoplasmic streaming provides an important vector in amyloplast redistribution in response to gravity.

Leopold, A. C.↗
NASA NTRS1997

Virtual Acoustics: Evaluation of Psychoacoustic Parameters

Current virtual acoustic displays for teleconferencing and virtual reality are usually limited to very simple or non-existent renderings of reverberation, a fundamental part of the acoustic environmental context that is encountered in day-to-day hearing. Several research efforts have produced results that suggest that environmental cues dramatically improve perceptual performance within virtual acoustic displays, and that is possible to manipulate signal processing parameters to effectively reproduce important aspects of virtual acoustic perception in real-time. However, the computational resources for rendering reverberation remain formidable. Our efforts at NASA Ames have been focused using a several perceptual threshold metrics, to determine how various "trade-offs" might be made in real-time acoustic rendering. This includes both original work and confirmation of existing data that was obtained in real rather than virtual environments. The talk will consider the importance of using individualized versus generalized pinnae cues (the "Head-Related Transfer Function"); the use of head movement cues; threshold data for early reflections and late reverberation; and consideration of the necessary accuracy for measuring and rendering octave-band absorption characteristics of various wall surfaces. In addition, a consideration of the analysis-synthesis of the reverberation within "everyday spaces" (offices, conference rooms) will be contrasted to the commonly used paradigm of concert hall spaces.

Begault, Durand R.↗
DOE OSTI2016

Avian collision risk models for wind energy impact assessments

With the increasing global development of wind energy, collision risk models (CRMs) are routinely used to assess the potential impacts of wind turbines on birds. We reviewed and compared the avian collision risk models currently available in the scientific literature, exploring aspects such as the calculation of a collision probability, inclusion of stationary components e.g. the tower, angle of approach and uncertainty. 10 models were cited in the literature and of these, all included a probability of collision of a single bird colliding with a wind turbine during passage through the rotor swept area, and the majority included a measure of the number of birds at risk. 7 out of the 10 models calculated the probability of birds colliding, whilst the remainder used a constant. We identified four approaches to calculate the probability of collision and these were used by others. 6 of the 10 models were deterministic and included the most frequently used models in the UK, with only 4 including variation or uncertainty in some way, the most recent using Bayesian methods. Despite their appeal, CRMs have their limitations and can be ‘data hungry’ as well as assuming much about bird movement and behaviour. As data become available, these assumptions should be tested to ensure that CRMs are functioning to adequately answer the questions posed by the wind energy sector. - Highlights: • We highlighted ten models available to assess avian collision risk. • Only 4 of the models included variability or uncertainty. • Collision risk models have limitations and can be ‘data hungry’. • It is vital that the most appropriate model is used for a given task.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Production Operations Management System

The Production Operations Management System (POMS) is a set of software tools which allows production teams and analysis groups across multiple Fermilab experiments to launch, modify and monitor large scale campaigns of related Monte Carlo or data processing jobs. POMS provides a web service interface that enables automated jobs submission on distributed resources according to customers’ requests and subsequent monitoring and recovery of failed submissions, debugging and record keeping. POMS interfaces with existing HEP data access, processing, movement and monitoring tools at Fermilab, including Jobsub, dCache, SAM, and FIFEmon, and in combination with them handles the creation and tracking of unique filenames for multistage campaigns. A flexible, interactive GUI interface exists as part of the system to visualize campaign stages, parallelization tracks and data flow. An important feature of POMS is a one-to-one connection between the GUI campaign visualizer and a text based representation of the complete campaign configuration. An extensible library of template campaign configurations is available. The templates are user modifiable and map cleanly to and from the GUI description of the campaign. Future releases of POMS will interface with Rucio for file movement.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Entropy-Assisted Quality Pattern Identification in Finance

Short-term patterns in financial time series form the cornerstone of many algorithmic trading strategies, yet extracting these patterns reliably from noisy market data remains a formidable challenge. In this paper, we propose an entropy-assisted framework for identifying high-quality, non-overlapping patterns that exhibit consistent behavior over time. We ground our approach in the premise that historical patterns, when accurately clustered and pruned, can yield substantial predictive power for short-term price movements. To achieve this, we incorporate an entropy-based measure as a proxy for information gain: patterns that lead to high one-sided movements in historical data yet retain low local entropy are more “informative” in signaling future market direction. Compared to conventional clustering techniques such as K-means and Gaussian Mixture Models (GMMs), which often yield biased or unbalanced groupings, our approach emphasizes balance over a forced visual boundary, ensuring that quality patterns are not lost due to over-segmentation. By emphasizing both predictive purity (low local entropy) and historical profitability, our method achieves a balanced representation of Buy and Sell patterns, making it better suited for short-term algorithmic trading strategies. This paper offers an in-depth illustration of our entropy-assisted framework through two case studies on Gold vs. USD and GBPUSD. While these examples demonstrate the method’s potential for extracting high-quality patterns, they do not constitute an exhaustive survey of all possible asset classes.

Physics↗
NASA NTRS1987

Remote sensing observations of sand movement in the Bahariya Depression, Western Egypt

Aerial photographs taken in the 1940's have been used in combination with recent Landsat MSS and TM data to study dune movement in the Western Desert of Egypt. The El-Ghorabi dunes track northwest to southeast along the eastern edge of the Bahariya Depression. These dunes are of complex longitudinal form with well-defined, lag-covered interdune corridors. Studies using both aerial coverage and multitemporal MSS and TM image data reveal little or no net southward extension or movement of the seifs, although field measurements and remote sensing data indicate small-scale lateral migration of dune crests and interdune corridors through time. The primary process of sand transport for these dunes seems to be in response to seasonal shifts in dominant wind direction, as reflected in the development and rapid response of sand shadows leeward of the main dune masses.

Maxwell, Ted A.↗
NASA NTRS1984

Geophysical interpretation of satellite laser ranging measurements of crustal movement in California

As determined by satellite laser ranging the rate of contraction of a 900 kilometer baseline between sites located near Quincy in northern California and San Diego in southern California is about 61 to 65 mm/yr with a formal uncertainty of about 10 mm/yr. The measured changes in baseline length are a manifestation of the relative motion between the North America and Pacific tectonic plates. This long baseline result is compared to measurements made by more conventional means on shorter baselines. Additional information based on seismicity, geology, and theoretical modelling is also analyzed. Deformation lying within a few tens of kilometers about the major faults in southern California accounts for most, but not all of the observed motion. Further motion is attributable to a broader scale deformation in southern California. Data suggesting crustal movements north of the Garlock fault, in and near the southern Sierra Nevada and local motion at an observatory are also critically reviewed. The best estimates of overall motion indicated by ground observations lie between 40 and 60 mm/yr. This lies within one or two standard deviations of that deduced by satellite ranging but the possibility of some unresolved deficit cannot be dismissed. The long time scale RM2 plate tectonic model of Minster and Jordan predicts a contraction between 47 and 53 mm/yr depending on the extension rate of the Basin and Range. Thus the ground based observations, satellite laser ranging (SLR) results, and RM2 rates differ at about the 10 mm/yr level and are consistent with one another within the data and model uncertainties.

Cohen, S. C.↗
DOE OSTI2016

SciDAC-Data, A Project to Enabling Data Driven Modeling of Exascale Computing

The SciDAC-Data project is a DOE funded initiative to analyze and exploit two decades of information and analytics that have been collected by the Fermilab Data Center on the organization, movement, and consumption of High Energy Physics data. The project will analyze the analysis patterns and data organization that have been used by the NOvA, MicroBooNE, MINERvA and other experiments, to develop realistic models of HEP analysis workflows and data processing. The SciDAC-Data project aims to provide both realistic input vectors and corresponding output data that can be used to optimize and validate simulations of HEP analysis. These simulations are designed to address questions of data handling, cache optimization and workflow structures that are the prerequisites for modern HEP analysis chains to be mapped and optimized to run on the next generation of leadership class exascale computing facilities. We will address the use of the SciDAC-Data distributions acquired from Fermilab Data Center’s analysis workflows and corresponding to around 71,000 HEP jobs, as the input to detailed queuing simulations that model the expected data consumption and caching behaviors of the work running in HPC environments. In particular we describe in detail how the Sequential Access via Metadata (SAM) data handling system in combination with the dCache/Enstore based data archive facilities have been analyzed to develop the radically different models of the analysis of HEP data. We present how the simulation may be used to analyze the impact of design choices in archive facilities.

Mubarak, M.↗
NASA NTRS2013

Orion MPCV GN and C End-to-End Phasing Tests

End-to-end integration tests are critical risk reduction efforts for any complex vehicle. Phasing tests are an end-to-end integrated test that validates system directional phasing (polarity) from sensor measurement through software algorithms to end effector response. Phasing tests are typically performed on a fully integrated and assembled flight vehicle where sensors are stimulated by moving the vehicle and the effectors are observed for proper polarity. Orion Multi-Purpose Crew Vehicle (MPCV) Pad Abort 1 (PA-1) Phasing Test was conducted from inertial measurement to Launch Abort System (LAS). Orion Exploration Flight Test 1 (EFT-1) has two end-to-end phasing tests planned. The first test from inertial measurement to Crew Module (CM) reaction control system thrusters uses navigation and flight control system software algorithms to process commands. The second test from inertial measurement to CM S-Band Phased Array Antenna (PAA) uses navigation and communication system software algorithms to process commands. Future Orion flights include Ascent Abort Flight Test 2 (AA-2) and Exploration Mission 1 (EM-1). These flights will include additional or updated sensors, software algorithms and effectors. This paper will explore the implementation of end-to-end phasing tests on a flight vehicle which has many constraints, trade-offs and compromises. Orion PA-1 Phasing Test was conducted at White Sands Missile Range (WSMR) from March 4-6, 2010. This test decreased the risk of mission failure by demonstrating proper flight control system polarity. Demonstration was achieved by stimulating the primary navigation sensor, processing sensor data to commands and viewing propulsion response. PA-1 primary navigation sensor was a Space Integrated Inertial Navigation System (INS) and Global Positioning System (GPS) (SIGI) which has onboard processing, INS (3 accelerometers and 3 rate gyros) and no GPS receiver. SIGI data was processed by GN&C software into thrust magnitude and direction commands. The processing changes through three phases of powered flight: pitchover, downrange and reorientation. The primary inputs to GN&C are attitude position, attitude rates, angle of attack (AOA) and angle of sideslip (AOS). Pitch and yaw attitude and attitude rate responses were verified by using a flight spare SIGI mounted to a 2-axis rate table. AOA and AOS responses were verified by using a data recorded from SIGI movements on a robotic arm located at NASA Johnson Space Center. The data was consolidated and used in an open-loop data input to the SIGI. Propulsion was the Launch Abort System (LAS) Attitude Control Motor (ACM) which consisted of a solid motor with 8 nozzles. Each nozzle has active thrust control by varying throat area with a pintle. LAS ACM pintles are observable through optically transparent nozzle covers. SIGI movements on robot arm, SIGI rate table movements and LAS ACM pintle responses were video recorded as test artifacts for analysis and evaluation. The PA-1 Phasing Test design was determined based on test performance requirements, operational restrictions and EGSE capabilities. This development progressed during different stages. For convenience these development stages are initial, working group, tiger team, Engineering Review Team (ERT) and final.

Neumann, Brian C.↗
DOE OSTI2019

Exploring microscopic driving volatility in naturalistic driving environment prior to involvement in safety critical events—Concept of event-based driving volatility

The sequence of instantaneous driving decisions and its variations, known as driving volatility, prior to involvement in safety critical events can be a leading indicator of safety. Here, this study focuses on the component of “driving volatility matrix” related to specific normal and safety-critical events, named “event-based volatility.” The research issue is characterizing volatility in instantaneous driving decisions in the longitudinal and lateral directions, and how it varies across drivers involved in normal driving, crash, and/or near-crash events. To explore the issue, a rigorous quasi-experimental study design is adopted to help compare driving behaviors in normal vs unsafe outcomes. Using a unique real-world naturalistic driving database from the 2nd Strategic Highway Research Program (SHRP), a test set of 9593 driving events featuring 2.2 million temporal samples of real-world driving are analyzed. This study features a plethora of kinematic sensors, video, and radar spatiotemporal data about vehicle movement and therefore offers the opportunity to initiate such exploration. By using information related to longitudinal and lateral accelerations and vehicular jerk, 24 different aggregate and segmented measures of driving volatility are proposed that captures variations in extreme instantaneous driving decisions. In doing so, careful attention is given to the issue of intentional vs. unintentional volatility. The volatility indices, as leading indicators of near-crash and crash events, are then linked with safety critical events, crash propensity, and other event specific explanatory variables. Owing to the presence of unobserved heterogeneity and omitted variable bias, fixed- and random-parameter discrete choice models are developed that relate crash propensity to unintentional driving volatility and other factors. Statistically significant evidence is found that driver volatilities in near-crash and crash events are significantly greater than volatility in normal driving events. After controlling for traffic, roadway, and unobserved factors, the results suggest that greater intentional volatility increases the likelihood of both crash and near-crash events. A one-unit increase in intentional volatility is associated with positive vehicular jerk in longitudinal direction increases the chance of crash and near-crash outcome by 15.79 and 12.52 percentage points, respectively. Importantly, intentional volatility in positive vehicular jerk in lateral direction has more negative consequences than intentional volatility in positive vehicular jerk in longitudinal direction. Compared to acceleration/deceleration, vehicular jerk can better characterize the volatility in microscopic instantaneous driving decisions prior to involvement in safety critical events. Finally, the magnitudes of correlations exhibit significant heterogeneity, and that accounting for the heterogeneous effects in the modeling framework can provide more reliable and accurate results. The study demonstrates the value of quasi-experimental study design and big data analytics for understanding extreme driving behaviors in safe vs. unsafe driving outcomes.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS2013

A System for Measuring the Sway of the Vehicle Assembly Building

A system was developed to measure the sway of the Vehicle Assembly Building (VAB) at Kennedy Space Center. This system was installed in the VAB and gathered more than one total year of data. The building movement was correlated with measurements provided by three wind towers in order to determine the maximum deflection of the building during high-wind events. The VAB owners were in the process of obtaining new platforms for use in assembling very tall rockets when analysis of the VAB showed that a high wind could move the building sufficiently that an upper platform might impact a rocket. The problem arises because safety requires a relatively small gap between the platform and the rocket, while a large enough gap is needed to ensure that stacking tolerances prevent contact between the rocket and the platform. This only leaves an inch or two (approximately 2 to 5 cm) of total clearance, so when the analysis showed that more than a couple of inches of motion could occur in a high wind, there was a potential for damaging the rocket. The KSC Applied Physics Laboratory was asked to install a system in the VAB that could measure the motion of the building in high winds to determine the actual building sway. The motion of the VAB roof under wind load was measured optically, and under analysis, it was determined that a relatively large-aperture optical system would be required to reduce diffraction effects to less than a small fraction of an inch (approximately mm) at a distance of 500 ft (≈150 m). A 10-in. (approximately 250 mm) telescope was placed on the floor of the building, looking at the ceiling. On the ceiling, a flat plate with three white LEDs was mounted in an "L" shape, such that the telescope was essentially looking at three stars. Software was written to track the motion of these three points using an image processing system. This provided a better than 1/10-in. (approximately 2.5-mm) 2D measurement faster than once a second. Data was downloaded once a month for comparison with the wind tower data. The system was fully operational and provided enough data to show that the VAB will only move 1 in. (approximately 2.5 cm) at the ceiling under 70-knot winds. Adjustable platforms are not required.

Youngquist, Robert↗
DOE OSTI2023

Role of social structure in establishment of an invasive large mammal after translocation

Abstract Background Data on the movement behavior of translocated wild pigs is needed to develop appropriate response strategies for containing and eliminating new source populations following translocation events. We conducted experimental trials to compare the home range establishment and space‐use metrics, including the number of days and distance traveled before becoming range residents, for wild pigs translocated with their social group and individually. Results We found wild pigs translocated with their social group made less extensive movements away from the release location and established a stable home range ~5 days faster than those translocated individually. We also examined how habitat quality impacted the home range sizes of translocated wild pigs and found wild pigs maintained larger ranges in areas with higher proportion of low‐quality habitat. Conclusion Collectively, our findings suggest translocations of invasive wild pigs have a greater probability of establishing a viable population near the release site when habitat quality is high and when released with members of their social unit compared to individuals moved independent of their social group or to low‐quality habitat. However, all wild pigs translocated in our study made extensive movements from their release location, highlighting the potential for single translocation events of either individuals or groups to have far‐reaching consequences within a much broader landscape beyond the location where they are released. These results highlight the challenges associated with containing populations in areas where illegal introduction of wild pigs occurs, and the need for rapid response once releases are identified. © 2023 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Clontz, Lindsay M.↗