Search NASA⌕ Search

SEARCH · Search NASA

Results for “Defect kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Recent Developments in Revealing the Impact of Complex Metal Oxide Reconstruction on Catalysis

Surface reconstruction of complex metal oxides refers to the alterations of the topmost catalyst surface, relative to the bulk structure, following exposure to pretreatment or reaction conditions during heterogeneous catalysis. (1) This structural and electronic transformation may involve (1) changes of the exposed crystallographic facets, (2) changes in chemical composition, such as the enrichment of specific elements, and, (3) morphological variations, including surface roughness and defects (Scheme 1). Beyond relaxation, surface reconstruction here also encompasses disruptions to the periodicity of the sublayers and changes to its stoichiometry. This change significantly influences the chemical properties of the catalyst surface, such as redox sites, (2) acid/base pairs, hydroxyl groups, (3) and surface defects. Surface reconstruction occurs due to the thermodynamic drive to lower the surface energy of the catalyst under the surrounding environment (e.g., temperature, chemical potential of species present). In addition to the treatment or reaction conditions, the extent of reconstruction also depends on the elements in the metal oxide structure. For instance, annealing ABO 3 perovskites (SrTiO 3 , BaTiO 3 , and BaZrO 3 ) at high temperatures (500 °C) in O 2 has a very different impact on the A/B ratio at the surface (ranging from 0.9 to 2.5), depending on the identity of A and B. (4) Metal oxide surface reconstruction under an electric field and exposure to acidic and alkaline media has recently gained increased attention in electrocatalysis, such as in the oxygen evolution reaction (OER); (5,6) however, in this Viewpoint we focus on the impact of surface reconstruction on thermal catalysis, a critical enduring research theme with ongoing challenges. Here, we start showcasing approaches to characterize surface reconstruction at the topmost surface layer, such as low-energy ion scattering (LEIS), discussing advantages and limitations. Next, we connect characterization of surface reconstruction to site-specific kinetic analysis, enabled via steady-state isotopic transient kinetic analysis (SSITKA), and we express our viewpoint on building structure–performance relationships by deeply understanding reconstructed surfaces. Later, we comment on the potential of tuning surface reconstruction to enhance catalytic performance. Finally, we explore the interplay between surface reconstruction and the “intelligent behavior”.

alcohol conversion↗
DOE OSTI2025

Interpretation of Ion Irradiation and Neutron Irradiation Damage in Additively Manufactured 316 Stainless Steel using Multiscale Modeling

The accelerated adoption of nuclear energy necessitates advanced manufacturing technologies, such as additive manufacturing, to meet heightened supply chain requirements and support innovative reactor technologies. Due to the unique microstructural characteristics of additively manufactured materials under distinct solidification conditions, comprehensive evaluation of their performance in reactor environments is essential. The Advanced Materials and Manufacturing Technologies program under the Department of Energy's Office of Nuclear Energy focuses on understanding the irradiation performance and damage evolution of laser powder bed fusion 316 stainless steel, with an emphasis on integrating ion and neutron irradiation data to accelerate the development and qualification of materials for advanced nuclear reactor applications. While ion irradiation is a cost- and time-effective method, modeling and simulation are required to interpret the data for the broader range of irradiation conditions encountered in advanced reactors. In fiscal year 2025, integrated multiscale modeling and simulations were conducted to assess irradiation damage in additively manufactured 316 stainless steel. Key outcomes include predictions of chromium enrichment at grain boundaries, nickel enrichment at dislocation cell walls and void surfaces, and heterogeneous void evolution under ion and neutron irradiation conditions. Cluster dynamics simulations revealed the coarsening of voids at high irradiation temperatures and the suppression of void growth by high network dislocation density, while also demonstrating significant growth and coarsening of voids and self-interstitial atom loops at low dose rates. Machine learning-accelerated atomistic simulations highlighted the impact of the local environment and chromium concentration on vacancy diffusivity, providing key insights on the influence of composition on void swelling and radiation-induced segregation. Additionally, molecular dynamics simulations demonstrated the presence of defect production bias and a significant effect of carbon content on defect cluster behavior. These combined efforts aim to predict the performance of additively manufactured materials under various reactor conditions, supporting their qualification for nuclear reactor applications by interpreting ion irradiation data. This report underscores the potential of integrated multiscale modeling to analyze ion irradiation data in the effort to accelerate the qualification of additively manufactured materials for nuclear reactor components.

316 stainless steel↗
DOE OSTI2020

Role of shell composition and morphology in achieving single-emitter photostability for green-emitting “giant” quantum dots

The use of the varied chemical reactivity of precursors to drive the production of a desired nanocrystal architecture has become a common method to grow thick-shell graded alloy quantum dots (QDs) with robust optical properties. Conclusions on their behavior assume the ideal chemical gradation and uniform particle composition. In this work, advanced analytical electron microscopy (high-resolution scanning transmission electron microscopy coupled with energy dispersive spectroscopy) is used to confirm the nature and extent of compositional gradation and these data are compared with performance behavior obtained from single-nanocrystal spectroscopy to elucidate structure, chemical-composition, and optical-property correlations. In particular, the evolution of the chemical structure and single-nanocrystal luminescence was determined for a time-series of graded-alloy “CdZnSSe/ZnS” core/shell QDs prepared in a single-pot reaction. In a separate step, thick (~6 monolayers) to giant (>14 monolayers) shells of ZnS were added to the alloyed QDs via a successive ionic layer adsorption and reaction (SILAR) process, and the impact of this shell on the optical performance was also assessed. By determining the degree of alloying for each component element on a per-particle basis, we observe that the actual product from the single-pot reaction is less “graded” in Cd and more so in Se than anticipated, with Se extending throughout the structure. The latter suggests much slower Se reaction kinetics than expected or an ability of Se to diffuse away from the initially nucleated core. It was also found that the subsequent growth of thick phase-pure ZnS shells by the SILAR method was required to significantly reduce blinking and photobleaching. However, correlated single-nanocrystal optical characterization and electron microscopy further revealed that these beneficial properties are only achieved if the thick ZnS shell is complete and without large lattice discontinuities. Thus, we identify the necessary structural design features that are required for ideal light emission properties in these green-visible emitting QDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

In Situ High-Temperature Ultrafast Electron Diffraction through Integrated Furnace and MEMS Platforms

Temperature fundamentally governs phase stability, defect evolution, and transport behavior in materials. Despite its central role, direct measurements of structural evolution at elevated temperatures on ultrafast timescales have remained limited. Here, we report the design, integration, and validation of 2 complementary in situ heating platforms that substantially extend the thermal operating range of ultrafast electron diffraction (UED). A compact furnace-type heating stage enables stable diffraction measurements from room temperature to 800 K with ±0.1 K stability under ultrahigh vacuum, achieved through multi-sensor feedback control, dual air-cooling channels, and a thermally isolated motion stage. In parallel, a microelectromechanical system (MEMS)-based heating platform provides rapid thermal response and access to extreme temperatures ≥1,373 K with ±0.1 K stability over hundreds-micrometer regions while supporting simultaneous electrical biasing for electrothermal coupling studies. Absolute temperature calibration is established using diffraction-based thermometry via aluminum lattice expansion and independently validated through in situ melting of bismuth thin films. UED measurements further reveal pronounced temperature-dependent nonequilibrium lattice dynamics in bismuth, including modifications to electron–phonon coupling and Debye–Waller behavior, as well as enhanced ultrafast diffuse scattering in aluminum at elevated temperatures. Together, these developments establish a practical framework for quantitative, time-resolved studies of temperature-driven kinetics and nonequilibrium structural dynamics under extreme thermal environments.

Bai, Qianqian [Chinese Academy of Sciences (CAS), ↗
DOE OSTI2022

Interspace and Vacancy Modulation: Promoting the Zinc Storage of an Alcohol-Based Organic–Inorganic Cathode in a Water–Organic Electrolyte

Expanding interspace and introducing vacancies are desired to promote the mobility of Zn ions and unlock the inactive sites of layered cathodes. However, this two-point modulation has not yet been achieved simultaneously in vanadium phosphate. Here, in this work, a strategy is proposed for fabricating an alcohol-based organic–inorganic hybrid material, VO 1–x PO 4 ·0.56C 6 H 14 O 4 , to realize the conjoint modulation of the d-interspace and oxygen vacancies. Peculiar triglycol molecules with an inclined orientation in the interlayer also boost the improvement in the conversion rate of V 5+ to V 4+ and the intensity of the P—O bond. Their synergism can ensure steerable adjustment for intercalation kinetics and electron transport, as well as realize high chemical reactivity and redox-center optimization, leading to at least 200% increase in capacity. Using a water–organic electrolyte, the designed Zn-ion batteries with an ultrahigh-rate profile deliver a long-term durability (fivefold greater than pristine material) and an excellent energy density of ≈142 Wh kg –1 (including masses of cathode and anode), thereby substantially outstripping most of the recently reported state-of-the-art zinc-ion batteries. This work proves the feasibility to realize the two-point modulation by using organic intercalants for exploiting high-performance new 2D materials.

25 ENERGY STORAGE↗
DOE OSTI2023

Unifying principles for catalytic hydrotreating processes (Final Technical Report)

This project builds on the hypothesis that the hydrotreating processes for the removal of oxygen and sulfur are fundamentally similar at the atomic-scale and existing knowledge from the treatment of petroleum derived feedstock can be leveraged for the design of novel catalysts for the upgrade of bio-oil. We tested this hypothesis by comparing computed potential energy diagrams for hydrodesulfurization (HDS) of thiophene over MoS 2 with hydrodeoxygenation (HDO) of furan over MoO 3 and concluded that certain aspects, such as catalyst promotion with transition metals, are valid strategies for both reactions. On the other hand, we also noticed significant differences in the mechanism for hydrogen (H 2 ) activation, which requires sites with metallic character. While MoS 2 is known to have metallic edge states that can catalyze H 2 dissociation, this elementary step is prohibitively slow on defect-free oxides. Only in the presence of vacancies or by creating metal/oxide interfaces can efficient H 2 activation sites during HDO be formed. The need for bifunctional catalyst when it comes to efficient and selective HDO or dehydrogenation reactions was further corroborated in joint experimental and theoretical studies of the Guerbet reaction for the coupling of biomass derived oxygenates over PdCu alloys, nitrate reduction over In-promoted Pd nanoparticles, and ethylene dehydroaromatization over Ga-exchanged ZSM-5 zeolites. All of these catalytic systems have in common that catalytic sites with distinct functional requirements are needed to create a working catalyst. Detailed computational studies were carried out for HDO of m -cresol and phenol on Ru-modified TiO 2 surfaces, which allowed us to attribute catalytic activity to the metal/oxide interface. A surprising finding was that heterolytic cleavage of the H-H bond across the Ru/TiO 2 interface was critically important, despite lower barriers for homolytic H 2 activation on Ru metal. The explanation lies in the high barriers for hydrogen spillover from Ru to TiO 2 , which becomes unnecessary in the heterolytic activation pathway. Moreover, we also reported that proton transfer steps between metal and oxide sites are mediated by weakly adsorbed surface water. During attempts to develop and validate a kinetic Monte Carlo (kMC) model for HDO reactions at the Ru/TiO 2 interface, it became clear that lateral interactions are paramount to describe realistic surface chemistry and without these interactions, the reduction and hydroxylation behavior from our simulations was inconsistent with reported experiments. To assess the importance of lateral interactions in popular computational catalyst design strategies relying on the identification of reactivity descriptors, which can be used along with Brønsted–Evans–Polanyi (BEP) and scaling relations as input to a microkinetic model (MKM) to make predictions for activity or selectivity trends, we compared predicted trends with those obtained from descriptor-based kMC models. We critically evaluated the benefits of kMC over MKM in terms of trend predictions and computational cost when using only a small set of input parameters. After confirming that in the absence of lateral interactions the kMC and MKM approaches yield identical trends and mechanistic information, we observed substantial differences between the two kinetic models when lateral interactions were introduced. The mean-field implementation applies coverage corrections directly to the descriptors, causing an artificial overprediction of the activity of strongly binding metals. In contrast, the cluster expansion in kMC implementation can differentiate among the highly active metals but it is very sensitive to the set of included interaction parameters. Considering that computational screening relies on a minimal set of descriptors, for which MKM makes reasonable trend predictions at a ca. three orders of magnitude lower computational cost than kMC, we concluded that the MKM approach does provide an overall better entry point for computational catalyst design. Overall, this project has led to 11 peer-reviewed publications, and their scientific is impact is well illustrated by their combined 702 citations.

08 HYDROGEN↗
DOE OSTI2023

Improved Thermal Stability of Oxysulfide Glassy Solid-State Electrolytes

In this study, the crystallization kinetics of (oxy)sulfide 70Li 2 S·(30-x)P 2 S 5 ·xP 2 O 5 (x = 0, 2, 5) solid-state electrolytes are reported. It was found that 5 mol% P 2 O 5 glass co-former slowed the crystallization rate of the Li 7 P 3 S 11−x/4 O x/4 ceramic phase by a factor of 10. After 10 min at 230 °C, a 70Li 2 S·30P 2 S 5 sulfide glass was 92% devitrified whereas a 70Li 2 S·25P 2 S 5 ·5P 2 O 5 oxysulfide glass was only 8% devitrified. The improved thermal stability of oxysulfide glasses was then utilized to demonstrate the fabrication of a standalone, reinforced SSE separator by hot pressing. More importantly, it was recognized that the microstructure of 70Li 2 S·25P 2 S 5 ·5P 2 O 5 oxysulfide SSE separators could be modified by hot pressing without changing ionic conductivity. This result was achieved because the precipitation of a superionically conductive Li 7 P 3 S 11−x/4 O x/4 ceramic phase was limited. A study was then conducted to determine what effect microstructure has on the susceptibility of SSE separators to shorting by lithium metal penetration. Hot-pressed separators were found to be more susceptible to shorting than cold-pressed separators. X-ray Computer Tomography (XCT) of post-mortem samples showed that hot-pressed samples failed by transverse microcrack pathways, which underscores the importance of low defect density in dense SSE separators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ab initio prediction of rapid kinetics of Fe impurities in δ -Pu

Here, we study the formation energies of iron impurities in δ-Pu within spin–orbital-polarized density functional theory (SOP-DFT). The thermodynamic solubility limit of iron in δ-Pu is calculated, indicating low miscibility. We show that surprisingly, Fe impurities at equilibrium are almost equally likely to occupy octahedral interstitial sites or substitutional sites, with slight preference for the former. In contrast, we find the energy of the tetrahedral interstitial Fe to be nearly 1 eV higher than the octahedral one. We explore the energy landscape for Fe impurity hopping diffusion and conclude that Fe impurities in δ-Pu are divided into two populations: (i) Immobile substitutional Fe impurities and (ii) highly mobile interstitial Fe impurities. The latter, (ii), migrate between octahedral interstitial sites with an energy barrier of around 0.2 eV. The energy barrier for exchange between the two populations is calculated to exceed 0.7 eV. Finally, we discuss the role of magnetic order on the impurity energetics.

Atomic structure↗
DOE OSTI2024

Vacancy diffusion barrier spectrum and diffusion correlation in multicomponent alloys

Vacancy diffusion serves a crucial role in many important kinetic behaviors and properties of multicomponent alloys. Essential questions, however, persist regarding how chemical complexity affects diffusion and what unique characteristics, if any, set these alloys apart from traditional metals. Using neural network kinetics model, we study vacancy diffusion in NbMoTa alloy across a broad temperature range (2600 to 800 K). Unlike pure metals, the two key diffusion parameters—diffusion correlation factor f and activation energy ΔG m —are not constant in alloys, but instead substantially decrease with decreasing temperature. This temperature dependence arises from a reduced number of active vacancy jump pathways at lower temperatures, leading to more correlated diffusion. Upon examining vacancy diffusion throughout the entire compositional space of the Nb-Mo-Ta system, we discover that the slowest vacancy diffusion surprisingly occurs in the non-equimolar region, rather than the equimolar concentration where the configurational entropy is highest. The diffusion barrier spectrum, characterizing the diffusion energy landscape, is an intrinsic material characteristic, which controls both f and ΔG m and, thereby, the diffusivity. Lastly, we find that the vacancy diffusion rate drops noticeably in the presence of local chemical order in the NbMoTa system, particularly for MoTa alloys with long-range B2 order.

Defects↗
DOE OSTI2021

Energy barriers for Dy and H penetrating graphene on 6 H -SiC(0001) and freestanding bilayer graphene from first-principles calculations

Currently, intercalation of foreign guest atoms into two-dimensional (2D) layered van der Waals materials is an active research area motivated in part by the development of next-generation energy-storage technologies and optoelectronic devices. One such extensively studied 2D material is the graphene-on-SiC system. To realize and control the desired intercalated structures, it is fundamentally important to understand the kinetic process of intercalation. For the intercalation of a guest atom into graphene layers on SiC substrate, a critical kinetic parameter is the energy barrier of a guest atom penetrating the perfect graphene top layer into the gallery under it. However, accurate theoretical calculations for such penetration barriers are unavailable in literature. From our first-principles density functional theory calculations, we obtain the global energy barriers of 3.47 and 1.80 eV for single Dy and H atoms penetrating the graphene top layer on a graphene buffer layer supported by a Si-terminated 6H-SiC(0001) substrate, respectively. Furthermore, for comparison as well as for examining the lateral strain effects, we also obtain the global barriers of 5.05 and 1.50 eV for single Dy and H atoms penetrating freestanding bilayer graphene with a tensile strain of about 8.8% to match our model for supported graphene, as well as the global barriers of 7.21 and 4.18 eV for penetrating unstrained freestanding bilayer graphene, respectively. From corresponding minimum energy paths with multiple energy minima and saddle points, we can also obtain various local energy barriers and the global backward barrier from the graphene gallery back to the top surface.

2D materials↗
DOE OSTI2021

Migration Kinetics of Surface Ions in Oxygen-Deficient Perovskite During Topotactic Transitions

Oxygen diffusivity and surface exchange kinetics underpin the ionic, electronic, and catalytic functionalities of complex multivalent oxides. Towards understanding and controlling the kinetics of oxygen transport in emerging technologies, it is highly desirable to reveal the underlying lattice dynamics and ionic activities related to oxygen variation. In this study, the evolution of oxygen content is identified in real-time during the progress of a topotactic phase transition in La 0.7 Sr 0.3 MnO 3-δ epitaxial thin films, both at the surface and throughout the bulk. Using polarized neutron reflectometry, a quantitative depth profile of the oxygen content gradient is achieved, which, alongside atomic-resolution scanning transmission electron microscopy, uniquely reveals the formation of a novel structural phase near the surface. Surface-sensitive X-ray spectroscopies further confirm a significant change of the electronic structure accompanying the transition. The anisotropic features of this novel phase enable a distinct oxygen diffusion pathway in contrast to conventional observation of oxygen motion at moderate temperatures. The results provide insights furthering the design of solid oxygen ion conductors within the framework of topotactic phase transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hole Trapping in Halide Perovskites Induces Phase Segregation

Metal halide perovskites have garnered a great deal of attention for their applications in photovoltaics, LEDs, and radiation detection. The ease of solution processing high-quality perovskite semiconductors with large absorption coefficients and tolerance to native defects is decidedly attractive. Additionally, the ability to precisely tune the band gap of halide perovskites through compositional alloying of the halide ion is of particular interest for a range of applications, especially for tandem solar cells. However, under steady state light irradiation, an initially homogeneous mixed halide perovskite (MHP) will form local domains that are rich in one halide ion (e.g., Br or I). This light-induced phase segregation in MHPs forms iodide-rich domains that act as charge carrier traps and lowers the efficiency of perovskite-based devices. Thus, phase segregation poses a serious challenge to the implementation of MHPs in real-world device settings. Interestingly, when a phase segregated MHP film is placed in the dark, entropic driving forces become dominant and the segregated perovskite remixes and returns to its initially homogeneous state. Several key mechanistic details of phase segregation have been elucidated over the years. However, there are still aspects of halide segregation that are not clear, and there is ongoing debate in the literature as to what are the key factors that contribute to the mechanism. This Account discusses recent results that point to the specific role of hole trapping in phase segregation. Interestingly, generation of holes through above-band-gap excitation or through electrochemical injection increases ion migration and leads to phase segregation. The thermodynamic and redox properties of halide perovskites provide a strong driving force for hole trapping and oxidation of iodide species in MHPs. However, mobile halide species within the perovskite lattice take time to migrate and generate halide-rich domains. When in contact with a nonpolar solvent, the migration of iodine species is further extended to expulsion of iodine from the perovskite film. Thus, the mobility of halides and their susceptibility to hole-induced oxidation play a crucial role in determining the long-term stability of metal halide perovskites. Strategies to gain kinetic control over ion migration to slow phase segregation are needed to overcome these hurdles and achieve stable mixed halide perovskites. Modification of the perovskite composition through introduction of different cations or halide ions, or introduction of low-dimensional perovskite phases may suppress phase segregation. Furthermore, in achieving stability and improving the efficiency of perovskite solar cells and light emitting devices with minimal impacts, suppression of segregation remains the key factor.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Fundamental Thermodynamic, Kinetic, and Mechanical Properties of Lithium and Its Alloys

Lithium alloying reactions are beneficial in promoting uniform plating and stripping of lithium metal in all-solid-state batteries. First-principles calculations are performed to predict thermodynamic, kinetic, and mechanical properties of lithium and several important Li–M alloys (M = Mg, Ag, Zn, Al, Ga, In, Sn, Sb, and Bi). While the Li–Mg binary system forms a solid solution, most other lithium–metal alloys prefer stoichiometric intermetallic compounds with common local motifs that enable fast Li diffusion. Lithium and Li-rich alloys exhibit an unusually flat energy landscape along paths that connect BCC to close-packed structures like FCC and HCP, with important implications for mechanical properties. Very low migration barriers for Li diffusion that rival those of superion conductors are predicted, both in pure Li and in Li–M intermetallics. However, vacancy concentration, which is crucial for substitutional diffusion, is predicted to be low in metallic Li and most Li–M intermetallics. Compounds such as B32 LiAl and LiGa as well as D0 3 Li 3 Sb and Li 3 Bi exhibit structural vacancies at higher ends of their voltage windows, which together with low migration barriers leads to exceptionally high Li mobilities. In the Li–Mg solid solution, the addition of Mg is found to decrease the vacancy tracer diffusion coefficient by an order of magnitude.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Maintaining a Flat Li Surface during the Li Stripping Process via Interface Design

Electroplating has been the main focus in mitigating the dendrite growth on the Li-metal electrode; however, the stripping process is equally critical, since the nonsmooth Li surface during stripping will lead to nonuniform local current density, planting the seeds for dendrite growth. In this paper, density functional theory (DFT) and kinetic Monte Carlo (KMC) techniques were combined to investigate the vacancy evolution in Li interfaced with different solid–electrolyte interphase (SEI) materials. It was found that the lithiophilic interface, such as Li/Li 2 O, repels vacancies into the bulk Li, so Li atoms can quickly fill the Li vacancies near the Li/Li 2 O interface and maintain a smooth Li surface. In contrast, the lithiophobic interface, such as Li/LiF, traps Li vacancies toward the interface, and the accumulated Li vacancies form voids and roughen the surface. The predicted critical stripping current density, below which a smooth Li surface will be maintained, is therefore much faster at the lithiophilic interface than that at the lithiophobic interface. It was further revealed that the lithiophilicity at different SEI or coating materials can be ranked as Li/Li 2 O > Li/LiPON > Li/Li 2 CO 3 > Li/LiF based on the calculated interfacial adhesion and accumulation of electron density at the interface. Furthermore, this suggests that interface and coating design at nanoscale can be effective for maintaining a smooth Li surface during the stripping process, solving another challenge to achieving a dendrite-free Li-metal electrode in both liquid and solid electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Antiretroviral therapy reveals triphasic decay of intact SIV genomes and persistence of ancestral variants

The decay kinetics of HIV-1-infected cells are critical to understand virus persistence. We evaluated the frequency of simian immunodeficiency virus (SIV)-infected cells for 4 years of antiretroviral therapy (ART). The intact proviral DNA assay (IPDA) and an assay for hypermutated proviruses revealed short- and long-term infected cell dynamics in macaques starting ART ~1 year after infection. Intact SIV genomes in circulating CD4+T cells showed triphasic decay with an initial phase slower than the decay of the plasma virus, a second phase faster than the second phase decay of intact HIV-1, and a stable third phase reached after 1.6–2.9 years. Hypermutated proviruses showed bi- or mono-phasic decay, reflecting different selective pressures. Viruses replicating at ART initiation had mutations conferring antibody escape. With time on ART, viruses with fewer mutations became more prominent, reflecting decay of variants replicating at ART initiation. Collectively, these findings confirm ART efficacy and indicate that cells enter the reservoir throughout untreated infection.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Kinetic Control of Angstrom-Scale Porosity in 2D Lattices for Direct Scalable Synthesis of Atomically Thin Proton Exchange Membranes

Angstrom-scale pores introduced into atomically thin 2D materials offer transformative advances for proton exchange membranes in several energy applications. Here, we show that facile kinetic control of scalable chemical vapor deposition (CVD) can allow for direct formation of angstrom-scale proton-selective pores in monolayer graphene with significant hindrance to even small, hydrated ions (K + diameter ~6.6 Å) and gas molecules (H 2 kinetic diameter ~2.9 Å). We demonstrate centimeter-scale Nafion|Graphene|Nafion membranes with proton conductance ~3.3–3.8 S cm –2 (graphene ~12.7–24.6 S cm –2 ) and H + /K + selectivity ~6.2–44.2 with liquid electrolytes. The same membranes show proton conductance ~4.6–4.8 S cm –2 (graphene ~39.9–57.5 S cm –2 ) and extremely low H 2 crossover ~1.7 × 10 –1 – 2.2 × 10 –1 mA cm –2 (~0.4 V, ~25 °C) with H 2 gas feed. We rationalize our findings via a resistance-based transport model and introduce a stacking approach that leverages combinatorial effects of interdefect distance and interlayer transport to allow for Nafion|Graphene|Graphene|Nafion membranes with H + /K + selectivity ~86.1 (at 1 M) and record low H 2 crossover current density ~2.5 × 10 –2 mA cm –2 , up to ~90% lower than state-of-the-art ionomer Nafion membranes ~2.7 × 10 –1 mA cm –2 under identical conditions, while still maintaining proton conductance ~4.2 S cm –2 (graphene stack ~20.8 S cm –2 ) comparable to that for Nafion of ~5.2 S cm –2 . Furthermore, our experimental insights enable functional atomically thin high flux proton exchange membranes with minimal crossover.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Kinetic Growth of Multicomponent Microcompartment Shells

An important goal of systems and synthetic biology is to produce high value chemical species in large quantities. Microcompartments, which are protein nanoshells encapsulating catalytic enzyme cargo, could potentially function as tunable nanobioreactors inside and outside cells to generate these high value species. Modifying the morphology of microcompartments through genetic engineering of shell proteins is one viable strategy to tune cofactor and metabolite access to encapsulated enzymes. However, this is a difficult task without understanding how changing interactions between the many different types of shell proteins and enzymes affect microcompartment assembly and shape. Here, we use multiscale molecular dynamics and experimental data to describe assembly pathways available to microcompartments composed of multiple types of shell proteins with varied interactions. As the average interaction between the enzyme cargo and the multiple types of shell proteins is weakened, the shell assembly pathway transitions from (i) nucleating on the enzyme cargo to (ii) nucleating in the bulk and then binding the cargo as it grows to (iii) an empty shell. Atomistic simulations and experiments using the 1,2-propanediol utilization microcompartment system demonstrate that shell protein interactions are highly varied and consistent with our multicomponent, coarse-grained model. Furthermore, our results suggest that intrinsic bending angles control the size of these microcompartments. Altogether, our simulations and experiments provide guidance to control microcomparmtent size and assembly by modulating the interactions between shell proteins.

defects↗
DOE OSTI2023

Halide Perovskites and Their Derivatives for Efficient, High‐Resolution Direct Radiation Detection: Design Strategies and Applications

Abstract The past decade has witnessed a rapid rise in the performance of optoelectronic devices based on lead‐halide perovskites (LHPs). The large mobility‐lifetime products and defect tolerance of these materials, essential for optoelectronics, also make them well‐suited for radiation detectors, especially given the heavy elements present, which is essential for strong X‐ray and γ‐ray attenuation. Over the past decade, LHP thick films, wafers, and single crystals have given rise to direct radiation detectors that have outperformed incumbent technologies in terms of sensitivity (reported values up to 3.5 × 10 6 µC Gy air −1 cm −2 ), limit of detection (directly measured values down to 1.5 nGy air s −1 ), along with competitive energy and imaging resolution at room temperature. At the same time, lead‐free perovskite‐inspired materials (e.g., methylammonium bismuth iodide), which have underperformed in solar cells, have recently matched and, in some areas (e.g., in polarization stability), surpassed the performance of LHP detectors. These advances open up opportunities to achieve devices for safer medical imaging, as well as more effective non‐invasive analysis for security, nuclear safety, or product inspection applications. Herein, the principles behind the rapid rises in performance of LHP and perovskite‐inspired material detectors, and how their properties and performance link with critical applications in non‐invasive diagnostics are discussed. The key strategies to engineer the performance of these materials, and the important challenges to overcome to commercialize these new technologies are also discussed.

36 MATERIALS SCIENCE↗