Search NASA⌕ Search

SEARCH · Search NASA

Results for “Display type.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

The order-disorder transition in Cu{sub 2}ZnSnS{sub 4} – A neutron scattering investigation

In this work a series of stoichiometric Cu{sub 2}ZnSnS{sub 4} (CZTS) samples annealed at different temperatures in the range of 473–623 K were investigated. The temperature dependence of the Cu/Zn-order-disorder behavior was analyzed by neutron powder diffraction measurements. Cu fully occupies the 2a and Sn the 2b position within the whole temperature range. For Zn and the remaining Cu on sites 2d and 2c, a clear change from ordered to disordered kesterite structure is found. The critical temperature T{sub c} for this Landau-type second order transition was determined as 552±2 K. It was found that in Cu{sub 2}ZnSnS{sub 4} very long annealing times are necessary to reach equilibrium at low temperatures. - Graphical abstract: The order-disorder transition in Cu{sub 2}ZnSnS{sub 4} was investigated using neutron diffraction techniques on samples annealed in the temperature range of 473–623 K. The critical temperature T{sub c} for this Landau-type second order transition was determined as 552±2 K. Display Omitted - Highlights: • The order-disorder transformation of Cu{sub 2}ZnSnS{sub 4} follows a Landau‐type behavior for a second order transition. • The critical exponent β is 0.57±0.06. • The critical temperature was determined as 552±2 K. • A fully ordered (within the standard deviation) Cu{sub 2}ZnSnS{sub 4} sample was synthesized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The small-scale clustering properties of dwarf galaxies

Two results on the small-scale clustering properties of dwarf galaxies are reported, which were identified in the vicinity of early-type Shapley-Ames galaxies on high-resolution photographic plates. The first result indicates that dwarf galaxies display the same trend of stronger clustering toward earlier morphological type on small scales as their giant counterparts on larger scales. It is suggested that early-type dwarfs can be used as dynamical probes of dark halos around early-type giant galaxies and as tracers of the dynamical evolution of such halos in dense environments. The second result pertains to the trend of increasing early-type dwarf frequency per early-type giant with environment richness previously established for rich groups. It is found that a minimum value of isolated early-type galaxies is approximately 0.25, as compared to a maximum of approximately 8 in rich environments like the Virgo Cluster.

Vader, J. P.↗

Low resistivity p-type Zn{sub 1−x}Al{sub x}O:Cu{sub 2}O composite transparent conducting oxide thin film fabricated by sol–gel method

Graphical abstract: Display Omitted Highlights: ► Cu{sub 2}O doped p-type AZO films was first prepared by sol–gel method. ► AZO:Cu{sub 2}O films showed a polycrystalline Cu{sub 2}O (1 1 0) and Cu (2 0 0) phases. ► p-Type conductivity was achieved by annealing in N{sub 2}/H{sub 2} forming gas at 400 °C. ► p–n junction (ITO/AZO:Cu{sub 2}O) revealed rectifying I–V characteristics. ► The mean optical transmittance of AZO:Cu{sub 2}Ofilms was >90%. -- Abstract: Highly transparent Cu{sub 2}O-doped p-type Zn{sub 1−x}Al{sub x}O (AZO; Al/Zn = 1.5 at%) conducting oxide films were synthesized on glass substrates using a cost effective low temperature sol–gel method. X-ray diffraction of the Cu{sub 2}O-doped AZO (AZO:Cu{sub 2}O) films revealed a polycrystalline Cu{sub 2}O (1 1 0) peak. The I–V measurements of the p–n junction (ITO/AZO:Cu{sub 2}O) revealed rectifying I–V characteristics, showing that these AZO:Cu{sub 2}O films exhibit p-type conductivity. p-Type conductivity was achieved by annealing the AZO:Cu{sub 2}O films in N{sub 2}/H{sub 2} forming gas at 400 °C. The hole concentration, hole mobility and resistivity of the 0.5–2 mol% AZO:Cu{sub 2}O films were 5.41 × 10{sup 18} to 1.99 × 10{sup 20} cm{sup −3}, 8.36–21.6 cm{sup 2}/V s and 1.66 × 10{sup −2} to 6.94 × 10{sup −3} Ω cm, respectively. These results show that post-annealing in a forming gas is effective and practicable in producing p-type AZO.

36 MATERIALS SCIENCE↗

Pyrolysis Rate and Yield Strength Reduction Incarbon Fiber and Glass Fiber Composites Underreentry Heating Conditions

The behavior of composite materials, specifically carbon fiber reinforced plastic (CFRP) and glass fiber reinforced plastic (GFRP), under reentry conditions poses a problem for space debris reentry risk modeling. Since these materials pyrolyze rather than melt and their different components demise at different rates, modeling their destruction to determine ground impact risk is complex. Modern spacecraft are using these materials in ever-greater quantities owing to their superior strength-to-weight characteristics, and this has required that the orbital debris community improve its understanding of how these materials demise on reentry. The NASA Orbital Debris Program Office undertook an extensive test campaign to better understand the rate at which several types of GFRP and CFRP materials pyrolyze under reentry heating conditions and how that pyrolysis affects the ultimate strength of the material. GFRP with a polyester resin (G10/FR-4) and CFRP with epoxy, cyanate ester, vinyl ester, and phenolic resins were tested. The test campaign was carried out at the Inductively Coupled Plasma (ICP) Torch Facility at the University of Texas at Austin. Because the ICP facility operates in a shirt-sleeve environment, test samples can be changed within seconds or minutes, allowing many samples to be tested in a short period. Two heat flux rates, 20 W/m2 and 30W/m2, and two oxygen concentration conditions, 0% and 2% of atmospheric, were applied to all five types of material. To measure both the char rate and the effect of pyrolysis on the ultimate material strength, two types of test were carried out for each material: a char rate test on a ~10 mm thick sample of material and an in-situ bending stress test of a ~2 mm thick sample of material. Measurements of the char rate showed very similar average pyrolysis front velocity in epoxy resin CFRP as in G10 at 3.6 mm/min and 3.4 mm/min, respectively. However, the total mass loss rate in theG10 was nearly double that of the CFRP at 3.8 g/min and 2.2 g/min, respectively. This result represented a slow ablation rate of carbon fibers in the CFRP at the temperatures encountered in low Earth orbit reentry and a comparatively rapid removal of the glass fibers in G10 due to melting and spallation. Pyrolysis front velocity was more significantly affected by the type of plastic than the type of fiber, with the cyanate ester CFRP samples displaying an average pyrolysis front velocity of only 1.9 mm/min. Similarly, the effect of thermal exposure on the ultimate strength of the material depended heavily on the type of plastic and very little on the type of fiber in the material. Epoxy, vinyl ester, and polyester resins all behaved very similarly, with complete structural failure at between 400 J/g and 600 J/g of specific absorbed heat. Phenolic and cyanate ester resins, on the other hand, displayed a change in structural properties that was only barely measurable with the current apparatus even after the maximum exposure time tested. These data are being incorporated into a numerical model of the ablation and demise of composite materials that will be used to more accurately calculate the ground casualty risk of future spacecraft.

Benton R. Greene↗

The effect of monocular target blur on simulated telerobotic manipulation

A simulation involving three types of telerobotic tasks that require information about the spatial position of objects is reported. This is similar to the results of psychophysical experiments examining the effect of blur on stereoacuity. It is suggested that other psychophysical experimental results could be used to predict operator performance for other telerobotic tasks. It is demonstrated that refractive errors in the helmet-mounted stereo display system can affect performance in the three types of telerobotic tasks. The results of two sets of experiments indicate that monocular target blur of two diopters or more degrades stereo display performance to the level of monocular displays. This indicates that moderate levels of visual degradation that affect the operator's stereoacuity may eliminate the performance advantage of stereo displays.

Liu, Andrew↗

Utilization of mixed ligands to construct diverse Ni(II)-coordination polymers based on terphenyl-2,2′,4,4′-tetracarboxylic acid and varied N-donor co-ligands

Three new coordination polymers, namely, {[Ni(H_2L)(bix)(H_2O)_2]·2h_2O}{sub n} (1), {[Ni(HL)(Hdpa)(H_2O)_2]·H_2O}{sub n} (2), {[Ni(L)_0_._5(bpp)(H_2O)]·H_2O}{sub n} (3) (H{sub 4}L=terphenyl-2,2′,4,4′-tetracarboxylic acid; bix=1,4-bis(imidazol-1-ylmethyl)benzene; dpa =4,4′-dipyridylamine; bpp=1,3-bis(4-pyridyl)propane), based on rigid H{sub 4}L ligand and different N-donor co-ligands, have been synthesized under hydrothermal conditions. Compound 1 features a 3D 4-connected 6{sup 6}-dia-type framework with H{sub 4}L ligand adopts a μ{sub 2}-bridging mode with two symmetry-related carboxylate groups in μ{sub 1}-η{sup 1}:η{sup 0} monodentate mode. Compound 2 displays a 1D [Ni(HL)(Hdpa)]{sub n} ribbon chains motif, in which the H{sub 4}L ligand adopts a μ{sub 2}-bridging mode with two carboxylate groups in μ{sub 1}-η{sup 1}:η{sup 1} and μ{sub 1}-η{sup 1}:η{sup 0} monodentate modes, while 3 possesses a (4,4)-connected 3D frameworks with bbf topology, with H{sub 4}L ligand displays a μ{sub 4}-bridging coordination mode. The H{sub 4}L ligand displays not only different deprotonated forms but also diverse coordination modes and conformations. The structural diversities among 1–3 have been carefully discussed, and the roles of N-donor co-ligands in the self-assembly of coordination polymers have been well documented. - Graphical abstract: Three nickel coordination polymers with different architectures based on mixed ligand system were synthesized and structurally characterized. Topology analyses indicate that 1 shows the 4-connected 6{sup 6}-dia net, 1D ribbon chains for 2 and 3D (4,4)-connected bbf network for 3. Display Omitted - Highlights: • Three Ni-based coordination polymers with distinct features have been prepared. • Compound 1 features a 3D 4-connected 66-dia-type framework, 2 displays a 1D [Ni(HL)(Hdpa)]{sub n} ribbon chains motif, while 3 possesses a (4,4)-connected 3D frameworks with bbf topology. • The “mixed ligand assembled” strategy is significant potential for network design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ON THE DISTRIBUTION OF ORBITAL ECCENTRICITIES FOR VERY LOW-MASS BINARIES

We have compiled a sample of 16 orbits for very low-mass stellar (<0.1 M{sub sun}) and brown dwarf binaries, including updated orbits for HD 130948BC and LP 415-20AB. This sample enables the first comprehensive study of the eccentricity distribution for such objects. We find that very low-mass binaries span a broad range of eccentricities from near-circular to highly eccentric (e {approx} 0.8), with a median eccentricity of 0.34. We have examined potential observational biases in this sample, and for visual binaries we show through Monte Carlo simulations that if we choose appropriate selection criteria then all eccentricities are equally represented ({approx}< 5% difference between input and output eccentricity distributions). The orbits of this sample of very low-mass binaries show some significant differences from their solar-type counterparts. They lack a correlation between orbital period and eccentricity, and display a much higher fraction of near-circular orbits (e < 0.1) than solar-type stars, which together may suggest a different formation mechanism or dynamical history for these two populations. Very low-mass binaries also do not follow the e{sup 2} distribution of Ambartsumian, which would be expected if their orbits were distributed in phase space according to a function of energy alone (e.g., the Boltzmann distribution). We find that current numerical simulations of very low-mass star formation do not completely reproduce the observed properties of our binary sample. The cluster formation model of Bate agrees very well with the overall e distribution, but the lack of any high-e (>0.6) binaries at orbital periods comparable to our sample suggests that tidal damping due to gas disks may play too large of a role in the simulations. In contrast, the circumstellar disk fragmentation model of Stamatellos and Whitworth predicts only high-e binaries and thus is highly inconsistent with our sample. These discrepancies could be explained if multiple formation processes are responsible for producing the field population.

79 ASTRONOMY AND ASTROPHYSICS↗

A novel metal-organic framework for high storage and separation of acetylene at room temperature

A novel 3D microporous metal-organic framework with NbO topology, [Cu{sub 2}(L)(H{sub 2}O){sub 2}]∙(DMF){sub 6}·(H{sub 2}O){sub 2} (ZJU-10, ZJU = Zhejiang University; H{sub 4}L =2′-hydroxy-[1,1′:4′,1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid; DMF =N,N-dimethylformamide), has been synthesized and structurally characterized. With suitable pore sizes and open Cu{sup 2+} sites, ZJU-10a exhibits high BET surface area of 2392 m{sup 2}/g, as well as moderately high C{sub 2}H{sub 2} volumetric uptake capacity of 132 cm{sup 3}/cm{sup 3}. Meanwhile, ZJU-10a is a promising porous material for separation of acetylene from methane and carbon dioxide gas mixtures at room temperature. - Graphical abstract: A new NbO-type microporous metal-organic framework ZJU-10 with suitable pore size and open Cu{sup 2+} sites was synthesized to realize the strong interaction with acetylene molecules, which can separate the acetylene from methane and carbon dioxane gas mixtures at room temperature. Display Omitted - Highlights: • A novel 3D NbO-type microporous metal-organic framework ZJU-10 was solvothermally synthesized and structurally characterized. • ZJU-10a exhibits high BET surface area of 2392 m{sup 2}/g. • ZJU-10a shows a moderately high C{sub 2}H{sub 2} gravimetric (volumetric) uptake capacity of 174 (132) cm{sup 3}/g at 298 K and 1 bar. • ZJU-10a can separate acetylene from methane and carbon dioxide gas mixtures at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

IMPLICATIONS OF BURST OSCILLATIONS FROM THE SLOWLY ROTATING ACCRETING PULSAR IGR J17480-2446 IN THE GLOBULAR CLUSTER TERZAN 5

The recently discovered accreting X-ray pulsar IGR J17480-2446 spins at a frequency of {approx}11 Hz. We show that Type I X-ray bursts from this source display oscillations at the same frequency as the stellar spin. IGR J17480-2446 is the first secure case of a slowly rotating neutron star (NS) which shows Type I burst oscillations (BOs), all other sources featuring such oscillations spin at hundreds of Hertz. This means that we can test BO models in a completely different regime. We explore the origin of Type I BOs in IGR J17480-2446 and conclude that they are not caused by global modes in the NS ocean. We also show that the Coriolis force is not able to confine an oscillation-producing hot spot on the stellar surface. The most likely scenario is that the BOs are produced by a hot spot confined by hydromagnetic stresses.

79 ASTRONOMY AND ASTROPHYSICS↗

Pilot Preferences for Information Provided and Its Format for Status, Alerts, and Controls

With the increased use of cathode ray tubes (CRTs) in flight decks and the computing power available, it is possible to combine status screens, alerts/procedures screens, and control screens onto a single display. This report presents the results of a survey designed to assess the perceived helpfulness and need of various pieces of information that could be included on status and control screens. The results from the survey indicate that operators want parameter ranges that change depending on the current aircraft configuration shown on bow-tie or dial displays. These displays should show the current value, normal range, alert type and range, and predictive information. Respondents wanted to see system relationships to one another for both component control and menu selection. When bringing up these various displays, this information should come up with a single button push. Finally, checklists should sense when a component has changed to the desired state.

Trujillo, Anna C.↗

Using an IIDC/DCAM camera for beam display and analysis

An IIDC/DCAM camera is used to the RHIC beams as they pass through a hydrogen jet. The data is transferred over a 1394 bus to a computer with a Linux operating system. A software process on that computer collects the individual frames and packages them into parameters within the RHIC control system's framework. This information is packaged to continuously update two primary types of clients: One type is responsible for near-real-time display of the images; useful in comfort displays, etc. The second is responsible for collecting data used in analysis of beam dynamics and properties like luminosity.

08 HYDROGEN↗

WormBase in 2022—data, processes, and tools for analyzing Caenorhabditis elegans

WormBase (www.wormbase.org) is the central repository for the genetics and genomics of the nematode Caenorhabditis elegans. We provide the research community with data and tools to facilitate the use of C. elegans and related nematodes as model organisms for studying human health, development, and many aspects of fundamental biology. Throughout our 22-year history, we have continued to evolve to reflect progress and innovation in the science and technologies involved in the study of C. elegans. We strive to incorporate new data types and richer data sets, and to provide integrated displays and services that avail the knowledge generated by the published nematode genetics literature. Here, we provide a broad overview of the current state of WormBase in terms of data type, curation workflows, analysis, and tools, including exciting new advances for analysis of single-cell data, text mining and visualization, and the new community collaboration forum. Concurrently, we continue the integration and harmonization of infrastructure, processes, and tools with the Alliance of Genome Resources, of which WormBase is a founding member.

59 BASIC BIOLOGICAL SCIENCES↗

Three new extended Preyssler-type polyoxometalates modified by transition metal-2,2 Prime -biimidazole complexes

Three extended Preyssler-type ({l_brace}P{sub 5}W{sub 30}{r_brace}) polyoxometalates modified by transition metal (TM)-2,2 Prime -biimidazole (abbreviated as H{sub 2}biim) complexes, namely [Mn(H{sub 2}biim){sub 3}]{sub 5}H{sub 2}[{l_brace}Mn(H{sub 2}biim){sub 2}(H{sub 2}O){r_brace} (NaP{sub 5}W{sub 30}O{sub 110})]{center_dot}39H{sub 2}O (1), [{l_brace}(H{sub 2}biim){sub 2}Zn({mu}-OH)Zn(H{sub 2}biim)({mu}-H{sub 2}biim)Zn(H{sub 2}biim)(H{sub 2}O){r_brace}{sub 2}H{sub 4}(NaP{sub 5}W{sub 30}O{sub 110})]{center_dot}22 H{sub 2}O (2), and {l_brace}(H{sub 4}biim){sub 18}NaH{sub 5}[({mu}-Fe(H{sub 3}biim)(H{sub 2}O){sub 3})({mu}-Fe(H{sub 2}O){sub 4})(NaP{sub 5}W{sub 30}O{sub 110}){sub 2}]{sub 2}{center_dot}78H{sub 2}O{r_brace}{sub n} (3) have been hydrothermally synthesized, and characterized by physicochemical and spectroscopic methods. Their catalytic activities have been investigated. 1 contains mono-supporting {l_brace}P{sub 5}W{sub 30}{r_brace} anions. In compound 2, a {l_brace}P{sub 5}W{sub 30}{r_brace} anion is bi-supported by two symmetrical chains constructed by trinuclear zinc complexes. Compound 3 is composed of infinite 1-D zigzag chains built up of {l_brace}P{sub 5}W{sub 30}{r_brace} polyoxoanions linked via [Fe(H{sub 2}O){sub 4}]{sup 3+} and [Fe(H{sub 3}biim)(H{sub 2}O){sub 3}]{sup 4+} fragments. H{sub 2}biim ligands adopt three coordination modes in the structure. All these compounds have 3-D supramolecular frameworks via extensive hydrogen-bonding interactions. - Graphical abstract: Three new extended Preyssler-type polyoxometalates modified by TM-2,2 Prime -biimidazole complexes are obtained, they display high thermal stabilities. Highlights: Black-Right-Pointing-Pointer Three new extended Preyssler-type polyoxometalates were hydrothermally synthesized. Black-Right-Pointing-Pointer An interesting trinuclear zinc-2,2 Prime -biimidazole-polyanion complex was obtained. Black-Right-Pointing-Pointer The huge {l_brace}P{sub 5}W{sub 30}{r_brace} clusters were modified by TM-2,2 Prime -biimidazole complexes. Black-Right-Pointing-Pointer There exist different coordinate modes in three compounds for the biimidazole ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation, crystal structure and photoluminescence of garnet-type calcium tin titanium aluminates

Colorless and transparent single crystals of Ca{sub 3}Sn{sub 2.2}Ti{sub 0.8}Al{sub 2}O{sub 12}, which emit blue-white light under ultraviolet light, were prepared by heating a mixture of oxides and calcium carbonate with a calcium and aluminum-rich composition at 1500 {sup o}C. Single crystal X-ray diffraction revealed that the crystal structure is the garnet-type with a cubic cell parameter (a=12.5309(3) A) and the space group, Ia 3-bar d (R1=0.0277, wR2=0.0663, and S=1.367 for all data). The structural formula is presented as Ca{sub 3}[Sn{sub 0.96}Ti{sub 0.04}]{sub octa}[Al{sub 0.67}Ti{sub 0.24}Sn{sub 0.09}]{sub tetra}O{sub 12}. Polycrystalline solid solutions of Ca{sub 3}Sn{sub 3-x}Ti{sub x}Al{sub 2}O{sub 12} were prepared by solid state reaction in air at 1370 {sup o}C with nominal titanium contents from x=0.6 to 1.4. The refined unit cell parameter decreased with increasing x. A broad blue-white emission with a peak wavelength of 465 nm was observed for the solid solutions at room temperature. -- Graphical abstract: Garnet-type solid solutions of Ca{sub 3}Sn{sub 3-x}Ti{sub x}Al{sub 2}O{sub 12} (x=0.6-1.4) were prepared. Sn{sup 4+} and Ti{sup 4+} partially occupy both tetrahedral and octahedral sites. The solid solutions showed a broad emission band peaking at 465 nm under UV excitation. Display Omitted Research highlights: {yields} New garnet-type solid solutions were found in the CaO-Al{sub 2}O{sub 3}-TiO{sub 2}-SnO{sub 2} system. {yields} Single crystals of Ca{sub 3}Sn{sub 2.2}Ti{sub 0.8}Al{sub 2}O{sub 12} were obtained by the self-flux method. {yields} Solid solutions with nominal compositions Ca{sub 3}Sn{sub 3-x}Ti{sub x}Al{sub 2}O{sub 12} (x=0.6-1.4) were prepared by solid state reaction at 1370 {sup o}C. {yields} Sn{sup 4+} and Ti{sup 4+} partially occupy both tetrahedral and octahedral sites, respectively, in the garnet-type structure. {yields} Ca{sub 3}Sn{sub 3-x}Ti{sub x}Al{sub 2}O{sub 12} solid solutions emitted blue-white light with a peak wavelength at 465 nm under UV irradiation.

36 MATERIALS SCIENCE↗

Characteristics of flattening filter free beams at low monitor unit settings

Purpose: Newer linear accelerators (linacs) have been equipped to deliver flattening filter free (FFF) beams. When FFF beams are used for step-and-shoot intensity-modulated radiotherapy (IMRT), the stability of delivery of small numbers of monitor units (MU) is important. The authors developed automatic measurement techniques to evaluate the stability of the dose profile, dose linearity, and consistency. Here, the authors report the performance of the Artiste™ accelerator (Siemens, Erlangen, Germany) in delivering low-MU FFF beams.Methods: A 6 MV flattened beam (6X) with 300 MU/min dose rate and FFF beams of 7 (7XU) and 11 MV (11XU), each with a 500 MU/min dose rate, were measured at 1, 2, 3, 5, 8, 10, and 20 MU settings. For the 2000 MU/min dose rate, the 7 (7XUH) and 11 MV (11XUH) beams were set at 10, 15, 20, 25, and 30 MU because of the limits of the minimum MU settings. Beams with 20 × 20 and 10 × 10 cm{sup 2} field sizes were alternately measured ten times in intensity modulated (IM) mode, with which Siemens linacs regulate beam delivery for step-and-shoot IMRT. The in- and crossplane beam profiles were measured using a Profiler™ Model 1170 (Sun Nuclear Corporation, Melbourne, FL) in multiframe mode. The frames of 20 × 20 cm{sup 2} beams were identified at the off-axis profile. The 6X beam profile was normalized at the central axis. The 7 and 11 MV FFF beam profiles were rescaled to set the dose at the central axis at 145% and 170%, respectively. Point doses were also measured using a Farmer-type ionization chamber and water-equivalent solid phantom to evaluate the linearity and consistency of low-MU beam delivery. The values displayed on the electrometer were recognized with a USB-type camera and read with open-source optical character recognition software.Results: The symmetry measurements of the 6X, 7XU, and 11XU beam profiles were better than 2% for beams ≥2 MU and improved with increasing MU. The variations in flatness of FFF beams ≥2 MU were ±5%. The standard deviation of the symmetry and flatness also decreased with increasing MU. The linearity of the 6X beam was ±1% and ±2% for the beams of ≥5 and ≥3 MU, respectively. The 7XU and 11XU beams of ≥2 MU showed linearity with ±2% except the 7XU beam of 8 MU (+2.9%). The profiles of the FFF beams with 2000 and 500 MU/min dose rate were similar.Conclusions: The characteristics of low-MU beams delivered in IM mode were evaluated using an automatic measurement system developed in this study. The authors demonstrated that the profiles of FFF beams of the Artiste™ linac were highly stable, even at low MU. The linearity of dose output was also stable for beams ≥2 MU.

61 RADIATION PROTECTION AND DOSIMETRY↗

Image Quality Characteristics of Handheld Display Devices for Medical Imaging

Handheld devices such as mobile phones and tablet computers have become widespread with thousands of available software applications. Recently, handhelds are being proposed as part of medical imaging solutions, especially in emergency medicine, where immediate consultation is required. However, handheld devices differ significantly from medical workstation displays in terms of display characteristics. Moreover, the characteristics vary significantly among device types. We investigate the image quality characteristics of various handheld devices with respect to luminance response, spatial resolution, spatial noise, and reflectance. We show that the luminance characteristics of the handheld displays are different from those of workstation displays complying with grayscale standard target response suggesting that luminance calibration might be needed. Our results also demonstrate that the spatial characteristics of handhelds can surpass those of medical workstation displays particularly for recent generation devices. While a 5 mega-pixel monochrome workstation display has horizontal and vertical modulation transfer factors of 0.52 and 0.47 at the Nyquist frequency, the handheld displays released after 2011 can have values higher than 0.63 at the respective Nyquist frequencies. The noise power spectra for workstation displays are higher than 1.2x10 -5 mm 2 at 1 mm -1 , while handheld displays have values lower than 3.7x10 -6 mm 2 . Reflectance measurements on some of the handheld displays are consistent with measurements for workstation displays with, in some cases, low specular and diffuse reflectance coefficients. The variability of the characterization results among devices due to the different technological features indicates that image quality varies greatly among handheld display devices.

47 OTHER INSTRUMENTATION↗

Investigation about thermophysical properties of Ln{sub 2}Ce{sub 2}O{sub 7} (Ln = Sm, Er and Yb) oxides for thermal barrier coatings

Graphical abstract: Display Omitted Highlights: ► We successfully prepared three types of new rare earth cerium oxides. ► We measured their thermophysical properties. ► These new ceramics can be explored as candidate ceramics for thermal barrier coatings. -- Abstract: Three kinds of rare earth cerium oxides – Ln{sub 2}Ce{sub 2}O{sub 7} (Ln = Sm, Er and Yb) were prepared by solid state reaction method. Their phase compositions, microstructures and thermophysical properties were investigated. Results of X-ray diffraction reveal that pure Ln{sub 2}Ce{sub 2}O{sub 7} (Ln = Sm, Er and Yb) oxides with fluorite structure are successfully synthesized in the current research. Scanning electrical microscopy results show that their microstructures are dense and no other un-reacted oxides or inter-phases exist in the interfaces between grains. Their thermal expansion coefficients are higher than those of YSZ, while their thermal conductivities are lower than those of YSZ. The decreasing ionic radius from Sm{sup 3+} to Yb{sup 3+} results in the descending thermal expansion coefficients from Sm{sub 2}Ce{sub 2}O{sub 7} to Yb{sub 2}Ce{sub 2}O{sub 7}. The effective phonon scattering by atomic weight difference contributes to the decreasing thermal conductivities from Sm{sub 2}Ce{sub 2}O{sub 7} to Yb{sub 2}Ce{sub 2}O{sub 7}. These results imply that synthesized rare earth cerium oxides have potentials to be used as novel candidate materials for thermal barrier coatings in the future.

36 MATERIALS SCIENCE↗

Interaction of celecoxib with different anti-cancer drugs is antagonistic in breast but not in other cancer cells

Celecoxib, an inhibitor of cyclooxygenase-2, is being investigated for enhancement of chemotherapy efficacy in cancer clinical trials. This study investigates the ability of cyclooxygenase-2 inhibitors to sensitize cells from different origins to several chemotherapeutic agents. The effect of the drug's mechanism of action and sequence of administration are also investigated. The sensitivity, cell cycle, apoptosis and DNA damage of five different cancer cell lines (HeLa, HCT116, HepG2, MCF7 and U251) to 5-FU, cisplatin, doxorubicin and etoposide {+-} celecoxib following different incubation schedules were analyzed. We found antagonism between celecoxib and the four drugs in the breast cancer cells MCF7 following all incubation schedules and between celecoxib and doxorubicin in all cell lines except for two combinations in HCT116 cells. Celecoxib with the other three drugs in the remaining four cell lines resulted in variable interactions. Mechanistic investigations revealed that celecoxib exerts different molecular effects in different cells. In some lines, it abrogates the drug-induced G2/M arrest enhancing pre-mature entry into mitosis with damaged DNA thus increasing apoptosis and resulting in synergism. In other cells, it enhances drug-induced G2/M arrest allowing time to repair drug-induced DNA damage before entry into mitosis and decreasing cell death resulting in antagonism. In some synergistic combinations, celecoxib-induced abrogation of G2/M arrest was not associated with apoptosis but permanent arrest in G1 phase. These results, if confirmed in-vivo, indicate that celecoxib is not a suitable chemosensitizer for breast cancer or with doxorubicin for other cancers. Moreover, combination of celecoxib with other drugs should be tailored to the tumor type, drug and administration schedule. - Graphical abstract: Display Omitted Highlights: > Celecoxib may enhance effects of anticancer drugs. > Its combination with four drugs was tested in five cancer cell lines. > It antagonized the effects of the four drugs in the breast cancer cell line MCF7. > Doxorubicin's cytotoxic effects were antagonized by celecoxib in four cell lines. > Cell cycle, apoptosis and DNA damage explain the different interactive effects.

60 APPLIED LIFE SCIENCES↗