Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Impulsive phase of solar flares. I - Characteristics of high energy electrons

The models describing the operative physical processes occurring during the impulsive phase of a solar flare can be broadly classified as thermal or nonthermal models. The current investigation is part of a series of studies which analyze the general characteristics of the 'nonthermal' models. The results are presented of an analysis regarding the steady state distribution of energetic electrons within the flare plasma. The time independent Fokker-Planck equation is used to determine the steady state distribution of the electrons in the ambient plasma. The model investigated encompasses thick-target, thin-target, and trap aspects of nonthermal hard X-ray models. High energy electrons with some initial energy spectrum and pitch angle distribution are injected at a height above the photosphere either into a closed magnetic loop structure or into an open field structure. Some approximate analytic solutions are discussed and the results of a numerical analysis are presented.

Leach, J.↗
NASA NTRS1992

The high energy AGN continuum - Models without e+e- -pairs

The general properties of the high energy AGN continuum are reviewed with particular emphasis on the connection between radio loud and radio quiet AGN in the broad context of the dynamics of accretion onto a black hole. Arguments are provided indicating the possibility that the emission from radio loud AGN originates at distances much larger than a few Schwarzschild radii from the black hole and hence the role of pairs in defining the observed spectrum is limited. A connection is made between the radio and high energy continuum of AGN.

Kazanas, Demosthenes↗
DOE OSTI2025

Modeling cross-beam energy transfer with sector ray tracing

Ray-based cross-beam energy transfer (CBET) models are an essential feature of the radiation-hydrodynamic codes used to simulate inertial confinement fusion implosions, but full 3D ray-based CBET calculations can have a prohibitively high computational cost. Sector ray tracing can be used to reduce the cost by orders of magnitude in cases where the coronal plasma and laser drive can be approximated as spherically symmetric. An extension of sector ray tracing (section ray tracing) can be used to relax the assumption of a spherically symmetric drive while still retaining most of the computational savings of a sector ray trace. We discuss the foundations of sector and section ray tracing and compare them to full ray tracing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Characterizing Uncertainty in Synthetic Tropical Cyclone Hazard Models for U.S. Energy Infrastructure Resilience

Tropical Cyclones (TCs) are intense storms that pose a persistent and considerable risk to coastal communities and infrastructure in the global tropics and subtropics, including the United States (US). With known limitations associated with observations and high-resolution earth system models, synthetic TC models that capture a wide spectrum of storm possibilities have been developed to robustly quantify TC risk. Here we examine the simulation of various TC features in the North Atlantic relevant for US coastal risk in three synthetic TC models forced with ERA5 reanalysis: MIT, CHAZ and RAFT. While there is a broad agreement among these models in terms of their representation of salient TC characteristics, certain differences do exist. To connect these modeling uncertainties with energy infrastructure resilience, we apply fragility curves that link simulated TC intensities to damage probabilities, demonstrating how uncertainty in storm states may translate into that in coastal impacts. Our study indicates that acknowledging and accounting for inter-model uncertainty leads to more reliable risk assessments, strengthening science-to-action pathways for managing risks associated with TCs.

Baby John, Effy↗
NASA NTRS1984

An energy balance climate model with cloud feedbacks

The present two-level global climate model, which is based on the atmosphere-surface energy balance, includes physically based parameterizations for the exchange of heat and moisture across latitude belts and between the surface and the atmosphere, precipitation and cloud formation, and solar and IR radiation. The model field predictions obtained encompass surface and atmospheric temperature, precipitation, relative humidity, and cloudiness. In the model integrations presented, it is noted that cloudiness is generally constant with changing temperature at low latitudes. High altitude cloudiness increases with temperature, although the cloud feedback effect on the radiation field remains small because of compensating effects on thermal and solar radiation. The net global feedback by the cloud field is negative, but small.

Roads, J. O.↗
NASA NTRS1986

Magnetohydrodynamics (MHD) modelling of flare energy buildup, the energy release phase, and its propagation into heliospheric space

Solar flare energy buildup at the photospheric level and energy release and transport into heliospheric space are examined using a composite MHD model. A four phase composite MHD model is described. An example demonstrating the applicability of the model is presented; the model was applied to the active region AR 2372. The limitations of this composite MHD model approach to analyzing solar flare energy buildup are discussed.

Wu, S. T.↗
NASA NTRS1989

Conservation equations and physical models for hypersonic air flows in thermal and chemical nonequilibrium

The conservation equations for simulating hypersonic flows in thermal and chemical nonequilibrium and details of the associated physical models are presented. These details include the curve fits used for defining thermodynamic properties of the 11 species air model, curve fits for collision cross sections, expressions for transport properties, the chemical kinetics models, and the vibrational and electronic energy relaxation models. The expressions are formulated in the context of either a two or three temperature model. Greater emphasis is placed on the two temperature model in which it is assumed that the translational and rotational energy models are in equilibrium at the translational temperature, T, and the vibrational, electronic, and electron translational energy modes are in equilibrium at the vibrational temperature, T sub v. The eigenvalues and eigenvectors associated with the Jacobian of the flux vector are also presented in order to accommodate the upwind based numerical solutions of the complete equation set.

Peter A. Gnoffo↗
DOE OSTI2025

Ten questions on building stock modeling to inform energy efficiency and sustainability

To enhance economic competitiveness and ensure energy efficiency, resilience, and security, cities and governments are adopting technologies and strategies to improve their existing building stocks. This approach aims to reduce energy use, improve energy affordability, and ensure a reliable power supply while safeguarding occupants during extreme weather events that may disrupt energy services. The effectiveness of these solutions will depend on building stock characteristics, use patterns, weather conditions, evolving technologies and their markets, and a city’s socio-economic conditions. This paper presents ten questions and answers that highlight the most important issues regarding the use of building stock modeling as a powerful tool to provide insights for informing stakeholders’ actions and decision-making on energy efficiency, costs reduction, and resilience of buildings in cities. Building stock modeling should build upon the fit-for-purpose framework, balancing the use case accuracy requirements, level of complexity, and needed resources (expertise, compute). The advancements in Artificial Intelligence (AI), the increasingly available open dataset of building stock in cities, and the more affordable powerful computing will accelerate the adoption of building stock modeling across scales by researchers and practitioners to inform decision making on sustainability and efficiency.

AI↗
NASA NTRS1992

The simulated features of heliospheric cosmic-ray modulation with a time-dependent drift model. III - General energy dependence

The time-dependent cosmic-ray transport equation is solved numerically in an axially symmetric heliosphere. Gradient and curvature drifts are incorporated, together with an emulated wavy neutral sheet. This model is used to simulate heliospheric cosmic-ray modulation for the period 1985-1989 during which drifts are considered to be important. The general energy dependence of the modulation of Galactic protons is studied as predicted by the model for the energy range 1 MeV to 10 GeV. The corresponding instantaneous radial and latitudinal gradients are calculated, and it is found that, whereas the latitudinal gradients follow the trends in the waviness of the neutral sheet to a large extent for all energies, the radial gradients below about 200 MeV deviate from this general pattern. In particular, these gradients increase when the waviness decreases for the simulated period 1985-1987.3, after which they again follow the neutral sheet by increasing rapidly.

Potgieter, M. S.↗
NASA NTRS1980

A thermalized ion explosion model for high energy sputtering and track registration

A velocity spectrum of neutral sputtered particles as well as a low resolution mass spectrum of sputtered molecular ions was measured for 4.74 MeV F-19(+2) incident of UF4. The velocity spectrum is dramatically different from spectra taken with low energy (keV) bombarding ions, and is shown to be consistent with a hot plasma of atoms in thermal equilibrium inside the target. A thermalized ion explosion model is proposed for high energy sputtering which is expected to describe track formation in dielectric materials. The model is shown to be consistent with the observed total sputtering yield and the dependence of the yield on the primary ionization rate of the incident ion.

Seiberling, L. E.↗
NASA NTRS1994

A simple hydrologically based model of land surface water and energy fluxes for general circulation models

A generalization of the single soil layer variable infiltration capacity (VIC) land surface hydrological model previously implemented in the Geophysical Fluid Dynamics Laboratory (GFDL) general circulation model (GCM) is described. The new model is comprised of a two-layer characterization of the soil column, and uses an aerodynamic representation of the latent and sensible heat fluxes at the land surface. The infiltration algorithm for the upper layer is essentially the same as for the single layer VIC model, while the lower layer drainage formulation is of the form previously implemented in the Max-Planck-Institut GCM. The model partitions the area of interest (e.g., grid cell) into multiple land surface cover types; for each land cover type the fraction of roots in the upper and lower zone is specified. Evapotranspiration consists of three components: canopy evaporation, evaporation from bare soils, and transpiration, which is represented using a canopy and architectural resistance formulation. Once the latent heat flux has been computed, the surface energy balance is iterated to solve for the land surface temperature at each time step. The model was tested using long-term hydrologic and climatological data for Kings Creek, Kansas to estimate and validate the hydrological parameters, and surface flux data from three First International Satellite Land Surface Climatology Project Field Experiment (FIFE) intensive field campaigns in the summer-fall of 1987 to validate the surface energy fluxes.

Liang, XU↗
NASA NTRS1997

Correspondence between theoretical models and dual energy x-ray absorptiometry measurements of femoral cross-sectional growth during adolescence

We have developed an analytical model of long bone cross-sectional ontogeny in which appositional growth of the diaphysis is primarily driven by mechanical stimuli associated with increasing body mass during growth and development. In this study, our goal was to compare theoretical predictions of femoral diaphyseal structure from this model with measurements of femoral bone mineral and geometry by dual energy x-ray absorptiometry. Measurements of mid-diaphyseal femoral geometry and structure were made previously in 101 Caucasian adolescents and young adults 9-26 years of age. The data on measured bone mineral content and calculated section modulus were compared with the results of our analytical model of cross-sectional development of the human femur over the same age range. Both bone mineral content and section modulus showed good correspondence with experimental measurements when the relationships with age and body mass were examined. Strong linear relationships were evident for both parameters when examined as a function of body mass.

NASA Discipline Musculoskeletal↗
NASA NTRS1977

A simulation model for wind energy storage systems. Volume 2: Operation manual

A comprehensive computer program (SIMWEST) developed for the modeling of wind energy/storage systems utilizing any combination of five types of storage (pumped hydro, battery, thermal, flywheel, and pneumatic) is described. Features of the program include: a precompiler which generates computer models (in FORTRAN) of complex wind source/storage/application systems, from user specifications using the respective library components; a program which provides the techno-economic system analysis with the respective I/O the integration of system dynamics, and the iteration for conveyance of variables; and capability to evaluate economic feasibility as well as general performance of wind energy systems. The SIMWEST operation manual is presented and the usage of the SIMWEST program and the design of the library components are described. A number of example simulations intended to familiarize the user with the program's operation is given along with a listing of each SIMWEST library subroutine.

Warren, A. W.↗
NASA NTRS1979

The updated algorithm of the Energy Consumption Program (ECP): A computer model simulating heating and cooling energy loads in buildings

The energy Comsumption Computer Program was developed to simulate building heating and cooling loads and compute thermal and electric energy consumption and cost. This article reports on the new additional algorithms and modifications made in an effort to widen the areas of application. The program structure was rewritten accordingly to refine and advance the building model and to further reduce the processing time and cost. The program is noted for its very low cost and ease of use compared to other available codes. The accuracy of computations is not sacrificed however, since the results are expected to lie within + or - 10% of actual energy meter readings.

Lansing, F. L.↗
DOE OSTI2024

Organizational Influence on Supply Chain for Digital Energy Infrastructure: Business Models, and Policy Landscape

Significant investment is driving the essential modernization and digitization of U.S. energy infrastructure, but the United States faces a key challenge in this grid transformation: our renewable and clean energy supply chains have limited capacity to source necessary digital assets through U.S. or allied sources. Batteries and their associated power electronic interfaces are key components to delivering clean and more resilient energy delivery, providing much-needed fast ramping, emergency discharge, generation, and operations support to the electric grid. These services have grown to be invaluable over the past 10 years and will soon be an irreplaceable component of energy delivery. While there have been significant strides to move supply chains for raw and critical materials to U.S. and allied nations, the control and power electronic industry has lagged, in part because of lower cost margins. For example, the United States now has growing capacity to manufacture solar photovoltaic (PV) panels, but 90% of the inverters—which are essential to the conversion of DC to AC for grid connection and controls—are made in or source parts from the People’s Republic of China (PRC). While a global supply chain is beneficial for many economic and supply diversification reasons, presence of foreign entities of concern (FEOC) in a dominant role in this supply chain brings additional concerns for national security of infrastructure. The BESS relationship and new clean energy have features that warrant discussions and additional focus on impact for technology security, given their critical role. This review considers the impact and solutions for complex business and policy landscapes in clean energy supply chain, and the benefit trade-offs, focusing on the Battery Energy Storage System case study, and its complex organizational relationships across both the US, Allied countries and Foreign Entities of Concern. While many examples in this paper are presented on PRC focused manufacture, this could apply to any potentially adversarial relationship

25 - ENERGY STORAGE↗
DOE OSTI2026

Surrogate model evaluation and building energy benchmarking for commercial buildings

Building energy consumption benchmarking involves challenges associated with various energy patterns for different building types; heating, ventilating, and air-conditioning (HVAC) system types; and climates. Given significant variation in energy use patterns, accurate prediction of long-term energy use using surrogate models remains challenging. Multiple linear regression (MLR) is commonly used for building energy benchmarking because of its simple structure; however, it lacks accuracy compared to other black-box models. Although many studies have compared surrogate models and offer guidance on model selection based on metrics, they do not provide detailed analysis on improving the surrogate model accuracy. In this paper, we implement a surrogate model using polynomial ridge regression (i.e., MLR with interaction terms combined with ridge regularization) for small office and retail strip mall buildings across six HVAC system types and all climate zones, for electricity and natural gas in baseline and proposed scenarios. A simulation workflow is developed using OpenStudio TM /EnergyPlus TM to generate simulation data using measures over a wide range of efficiency inputs. Enhancements based on statistical insights are used for improving the model accuracy using filters, input transformations, and change points. Surrogate models achieved average coefficient of variation of the root mean squared error (CVRMSE) values of 2.17, 1.06, 2.05, and 3.26 for proposed electricity, proposed natural gas, baseline electricity, and baseline natural gas, respectively, with enhancements reducing CVRMSE by an average of 14.9% across all combinations. We provide model interpretation via Shapley additive explanations to determine which input variables most influence energy consumption and provide supportive arguments for enhancements.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Impedance Emulation Control of Wave Energy Converters

Modeling and control of wave energy conversion (WEC) systems for maximum power extraction is challenging due to complex multiphysics that include fluids, mechanics, and machine drives. To uncover an intuitive model that clearly depicts WEC system operation, we utilize a force-current equivalent circuit framework which then enables us to design an impedance emulation control strategy. To provide context for our framework, we focus on a standard reference model-3 (RM3) point absorber device coupled to a permanent magnet synchronous generator. After the proposed extremum seeking controller is computed, we experimentally validate its performance on a platform that consists of two back-to-back connected inverters that emulate the WEC system.

wave energy conversion, impedance emulation, machi↗