Search NASA⌕ Search

SEARCH · Search NASA

Results for “Entry Vehicle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

ADEPT for Secondary Payloads

Deployable entry vehicles provide an enabling capability for large payloads at destinations across the solar system. The primary advantage of such systems derives from the fundamental limitation of available launch vehicle shroads preventing tried-and-true rigid aeroshell technology from being applied. However, little mission-pull exists for deployable entry vehicle technology for missions where the entry vehicle is the primary payload and can fit within available shrouds. The propensity toward applying rigid aeroshell technology is logical given that deployable concepts are higher risk and provide no marginal scientific benefit for missions where a rigid aeroshell is an option. A movement toward flying smaller spacecraft has emerged in recent years and is revealing novel applications for deployable entry vehicles as secondary payloads. Secondary payloads must minimize interference with the primary payload in order to ease accomodation. Advancements in small spacecraft technology have caught the attention of government entities who are now recognizing the high value proposition of small spacecraft for frequent, incremental technology development and science return rather than the traditional high cost and infrequent big-bang approaches. Worldwide, well over 200 small satellites (mass < 180 kg) have launched in recent years for such purposes as eduation, technology development, science, commerce, and defense. The Adaptable Deployable Entry and Placement Technology (ADEPT), a mechanically-deployable entry vehicle technology, has been under development at NASA since 2011. An Ames Center Innovation Fund (CIF) proposal was recently awarded to study ADEPT for EDL of small payloads. The unique capability of ADEPT for small science payloads comes from its ability to stow within a slender volume and deploy passively to achieve a mass-efficient drag surface with a high heat rate capability. The low ballistic coefficient results in entry heating and mechanical loads that can be met by a revolutionary three-dimensionally woven carbon fabric supported with rib structures. This carbon fabric has test-proven capability as both primary structure and payload thermal protection. This presentation will inform the EDL community of the capability of ADEPT for delivery of small secondary payloads as well as provide status of on-going technology development activities. Results of a mission applications study for secondary payloads to Mars and Venus will be presented. A primary goal of these mission design activities is to integrate high-value verification approaches wherever possible. For example, for some mission applications it is possible to test in NASA arc jet facilities at full-scale. This enables endto- end thermostructural requirement verification with a single test. Another important challenge that needs to be solved is the reliability of the decelerator to achieve the desired shape using simple passive mechanical actuators (such as springs) that do not require power from the primary payload for deployment. A configuration of ADEPT is being prototyped and used to evaluate the functionality and reliability of the deployment mechanism through bench-top testing. The prototype will then be tested in a low speed wind tunnel in late 2014 to evaluate aerodynamic load-carrying capability and deflected shape. Results of the deployment testing and status of wind tunnel test plans will be discussed.

Smith, B.↗
NASA NTRS1985

Definition of an entry research vehicle

Within the last year, there has been a growing interest in technology which would support the development of vehicles which can maneuver in the atmosphere while returning from orbit and vehicles which can fly in the atmosphere at hypersonic speeds for sustained periods of time. This rebirth of interest in hypersonics is partly a result of a developing awareness of the potential benefits which can be derived from vehicles with capability to operate between the limits of existing aircraft and spacecraft. Examples of the types of maneuvers which are projected for this new class of vehicles are presented. Challenges provided by the considered maneuvers are summarized, taking into account a synergetic or atmospheric plane change. The plane change maneuver will require a Thermal Protection System (TPS). Attention is given to the definition of a Shuttle launched entry research vehicle experiment. Details regarding the synergetic plane change are considered along with the maneuvering entry, vehicle heating, and experiments and instrumentation.

Freeman, D. C.↗
NASA NTRS2012

Mission Sizing and Trade Studies for Low Ballistic Coefficient Entry Systems to Venus

The U.S and the U.S.S.R. have sent seventeen successful atmospheric entry missions to Venus. Past missions to Venus have utilized rigid aeroshell systems for entry. This rigid aeroshell paradigm sets performance limitations since the size of the entry vehicle is constrained by the fairing diameter of the launch vehicle. This has limited ballistic coefficients (beta) to well above 100 kg/m2 for the entry vehicles. In order to maximize the science payload and minimize the Thermal Protection System (TPS) mass, these missions have entered at very steep entry flight path angles (gamma). Due to Venus thick atmosphere and the steep-gamma, high- conditions, these entry vehicles have been exposed to very high heat flux, very high pressures and extreme decelerations (upwards of 100 g's). Deployable aeroshells avoid the launch vehicle fairing diameter constraint by expanding to a larger diameter after the launch. Due to the potentially larger wetted area, deployable aeroshells achieve lower ballistic coefficients (well below 100 kg/m2), and if they are flown at shallower flight path angles, the entry vehicle can access trajectories with far lower decelerations (~50-60 g's), peak heat fluxes (~400 W/cm2) and peak pressures. The structural and TPS mass of the shallow-gamma, low-beta deployables are lower than their steep-gamma, high-beta rigid aeroshell counterparts at larger diameters, contributing to lower areal densities and potentially higher payload mass fractions. For example, at large diameters, deployables may attain aeroshell areal densities of 10 kg/m2 as opposed to 50 kg/m2 for rigid aeroshells. However, the low-beta, shallow-gamma paradigm also raises issues, such as the possibility of skip-out during entry. The shallow-gamma could also increase the landing footprint of the vehicle. Furthermore, the deployable entry systems may be flexible, so there could be fluid-structure interaction, especially in the high altitude, low-density regimes. The need for precision in guidance, navigation and control during entry also has to be better understood. This paper investigates some of the challenges facing the design of a shallow-gamma, low-beta entry system.

Dutta, Soumyo↗
NASA NTRS2016

Passive vs. Parachute System Architecture for Robotic Sample Return Vehicles

The Multi-Mission Earth Entry Vehicle (MMEEV) is a flexible vehicle concept based on the Mars Sample Return (MSR) EEV design which can be used in the preliminary sample return mission study phase to parametrically investigate any trade space of interest to determine the best entry vehicle design approach for that particular mission concept. In addition to the trade space dimensions often considered (e.g. entry conditions, payload size and mass, vehicle size, etc.), the MMEEV trade space considers whether it might be more beneficial for the vehicle to utilize a parachute system during descent/landing or to be fully passive (i.e. not use a parachute). In order to evaluate this trade space dimension, a simplified parachute system model has been developed based on inputs such as vehicle size/mass, payload size/mass and landing requirements. This model works in conjunction with analytical approximations of a mission trade space dataset provided by the MMEEV System Analysis for Planetary EDL (M-SAPE) tool to help quantify the differences between an active (with parachute) and a passive (no parachute) vehicle concept.

Maddock, Robert W.↗
NASA NTRS2016

Aerodynamic and Aerothermal TPS Instrumentation Reference Guide

The hypersonic regime of planetary entry combines the most severe environments that an entry vehicle will encounter with the greatest amount of uncertainty as to the events unfolding during that time period. This combination generally leads to conservatism in the design of an entry vehicle, specifically that of the thermal protection system (TPS). Each planetary entry provides a valuable aerodynamic and aerothermal testing opportunity; the utilization of this opportunity is paramount in better understanding how a specific entry vehicle responds to the demands of the hypersonic entry environment. Previous efforts have been made to instrument entry vehicles in order to collect data during the entry period and reconstruct the corresponding vehicle response. The purpose of this paper is to cumulatively document past TPS instrumentation designs for applicable planetary missions, as well as to list pertinent results and any explainable shortcomings.

Thermal Protection System↗
NASA NTRS1972

Space vehicle gyroscope sensor applications

Considerations which form the basis for the specification, design and evaluation of gyroscopes for spaceborne sensor applications are presented. The applications are distinguished by basic vehicle category: launch vehicles, spacecraft, entry vehicles and sounding rockets. Specifically excluded from discussion are gyroscope effector applications. Exotic or unconventional gyroscopes for which operational experience is nonexistent are mentioned only briefly to alert the reader of future trends. General requirements for testing and evaluation are discussed.

Source record↗
NASA NTRS1989

Computational aerothermodynamics

Computational aerothermodynamics concerns the coupling of real gas effects with equations of motion to include thermochemical rate processes for chemical and energy exchange phenomena. These processes concern the creation and destruction of gas species by chemical reactions and the transfer of energy between the various species and between the various energy modes (e.g., translation, rotation, vibration, ionization, dissociation/recombination, etc.) of the species. To gain some insight into when such phenomena occur for current and future aerospace flight vehicles the author shows the flight regimes of some typical vehicles (e.g., Concord, aerospace plane, Space Shuttle, associated space transfer vehicles, Apollo entry vehicle, etc.) in terms of flight altitude and flight speed. Also indicated are regimes where chemical reactions such as dissociation and ionization are important and where nonequilibrium thermochemical phenomena are important.

Deiwert, George S.↗
NASA NTRS1997

Outer Planet Mission Studies Neptune Aerocapture

Current and previous studies of orbiter missions to the outer planets have clearly identified high-energy aerocapture as a critical and enabling technology. Aerocapture involves the use of aerodynamic lift to fly a trajectory through a planet's atmosphere to sufficiently decelerate an entry vehicle to capture into planetary orbit. In the past, numerous studies of different configurations of lifting entry vehicles were studied for various planetary orbiter missions which identified aerocapture as a feasible concept yet complex and technically challenging. In order to determine the feasibility of high-speed aerocapture at the outer planets, an accurate trajectory simulation of the flight vehicle is the critical first step in the proposed research. Vehicle response to aerodynamic loading must be predicted accurately in the trajectory simulations. For several Neptune orbiter missions currently under study at the Jet Propulsion Laboratory (JPL), entry velocities relative to the rotating atmosphere ranging from 25 to 30 km/sec, are to be expected. Preliminary trajectory analysis has identified the various flow regimes the entry vehicle is expected to fly in the 8 1% H2 and 19% He atmosphere of Neptune. The size and mass of the vehicle are also determined by the launch vehicle constraints and orbiter spacecraft requirements. For a given baseline arrival conditions of an inertial entry velocity of 28 km/sec and an entry mass of 400 kg, a medium lift (L/D = 1), axisymmetric biconic shaped vehicle was selected in order to satisfy entry corridor width requirements expected for Neptune aerocapture. The analysis summarized in this study indicates that a biconic entry vehicle is a feasible concept for a Neptune aerocapture orbiter mission. The preliminary entry trajectory simulations has demonstrated adequate entry corridor control authority. Furthermore, estimates of the stagnation point heating environment has enabled the preliminary selection of candidate lightweight ceramic TPS materials.

Wercinski, Paul F.↗
NASA NTRS1988

A fault-tolerant avionics suite for an entry research vehicle

A highly-reliable avionics suite has been designed for an Entry Research Vehicle. The autonomous spacecraft would be deployed from the Space Shuttle Orbiter and perform a variety of aerodynamic and propulsive maneuvers which may be required for future space transportation system vehicles. The flight electronics consist of a central fault-tolerant processor, which is resilient to all first failures, reliably cross-strapped to redundant and distributed sets of sensors and effectors. This paper describes the preliminary design and analysis of the architecture which resulted from a fifteen month study by the Charles Stark Draper Laboratory for the NASA Langley Research Center. After a brief introduction to the design task, the architecture of the central flight computer and its interface to the vehicle are discussed. Following this, the method and results of the baseline reliability study for the avionic suite are presented.

Dzwonczyk, Mark↗
NASA NTRS2014

The Status of Spacecraft Bus and Platform Technology Development Under the NASA ISPT Program

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in three areas that include Propulsion System Technologies, Entry Vehicle Technologies, and Systems Mission Analysis. ISPTs propulsion technologies include: 1) NASAs Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; 2) a Hall-effect electric propulsion (HEP) system for sample return and low cost missions; 3) the Advanced Xenon Flow Control System (AXFS); ultra-lightweight propellant tank technologies (ULTT); and propulsion technologies for a Mars Ascent Vehicle (MAV). The AXFS and ULTT are two component technologies being developed with nearer-term flight infusion in mind, whereas NEXT and the HEP are being developed as EP systems. ISPTs entry vehicle technologies are: 1) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GNC) models of blunt-body rigid aeroshells; and aerothermal effect models; and 2) Multi-mission technologies for Earth Entry Vehicles (MMEEV) for sample return missions. The Systems Mission Analysis area is focused on developing tools and assessing the application of propulsion, entry vehicle, and spacecraft bus technologies to a wide variety of mission concepts. Several of the ISPT technologies are related to sample return missions and other spacecraft bus technology needs like: MAV propulsion, MMEEV, and electric propulsion. These technologies, as well as Aerocapture, are more vehicle and mission-focused, and present a different set of technology development challenges. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, Flagship and sample return missions currently under consideration. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness.

electric propulsion↗
NASA NTRS1986

Hypersonic aerodynamic characteristics of a candidate entry research vehicle

Static longitudinal and lateral-directional aerodynamic characteristics of a candidate lifting entry research vehicle were measured at Mach numbers of 6 and 10 in air and at Mach 20 in helium. The effects of nose bluntness, body flap deflection, and elevon deflection were examined over a range of angle of attack. The vehicle demonstrated static longitudinal and lateral-directional stability at angles of attack from the maximum lift-to-drag ratio (L/D)max to high angles of attack. Sufficient control effectiveness existed to provide longitudinal trim from (L/D)max to high angles of attack. Aerodynamic coefficients predicted using the Hypersonic Arbitrary Body Program were compared to measurement. Good agreement was obtained for lift-to-drag values.

Brauckmann, G. J.↗
NASA NTRS2005

A methodology of MSL breakup analysis for Earth accidental reentry and its application to breakup analysis for Mars off-nominal entry

Vehicle breakup analysis has been performed for missions that may carry nuclear fuel for heating or power purposes to assess nuclear safety in case of launch failure leading to atmospheric reentry. Also, failure scenarios exist which could lead to breakup during Entry / Descent / Landing (EDL) at Mars due to off-nominal entries, with implications for planetary protection requirements. Since the Mars Science Laboratory (MSL) spacecraft may include a Multi-Mission Radioisotope Thermoelectric Generator (MMRTG), an analysis of breakup in case of launch failure is required. Also, breakup during Mars EDL due to off-nominal entries could release the RTG heat source that has implications for planetary protection requirements. This paper presents a methodology of MSL breakup analysis for launch failure with application to Mars off-nominal entry.

nuclear safety↗
NASA NTRS1984

The next generation of reentry vehicles: NASA's view

The term reentry vehicle is used in the broad sense. The vehicles addressed include not only those that return from orbit to the Earth's surface, but also aeroassisted orbit transfer vehicles that use aerodynamic forces generated during atmospheric passes to achieve orbital changes with a smaller expenditure of energy than is required for an all-propulsion vehicle. Advanced reusable launch vehicles with special emphasis on system concepts and the influence of advanced technology on entry vehicle configuration are considered. Three categories of orbital transfer vehicles discussed: synergetic plane-change vehicles, planetary aerocapture vehicles, and LEO to GEO orbital transfer vehicles. While the orbital transfer and planetary vehicles are quite different from conventional winged Earth entry vehicles, synergetic plane change and high cross-range Earth entry vehicles have many similarities. Finally, a possible scenario for the development of the next generation of reentry vehicles is presented.

Walberg, G. D.↗
NASA NTRS2011

Advanced High-Temperature Flexible TPS for Inflatable Aerodynamic Decelerators

Typical entry vehicle aeroshells are limited in size by the launch vehicle shroud. Inflatable aerodynamic decelerators allow larger aeroshell diameters for entry vehicles because they are not constrained to the launch vehicle shroud diameter. During launch, the hypersonic inflatable aerodynamic decelerator (HIAD) is packed in a stowed configuration. Prior to atmospheric entry, the HIAD is deployed to produce a drag device many times larger than the launch shroud diameter. The large surface area of the inflatable aeroshell provides deceleration of high-mass entry vehicles at relatively low ballistic coefficients. Even for these low ballistic coefficients there is still appreciable heating, requiring the HIAD to employ a thermal protection system (TPS). This TPS must be capable of surviving the heat pulse, and the rigors of fabrication handling, high density packing, deployment, and aerodynamic loading. This paper provides a comprehensive overview of flexible TPS tests and results, conducted over the last three years. This paper also includes an overview of each test facility, the general approach for testing flexible TPS, the thermal analysis methodology and results, and a comparison with 8-foot High Temperature Tunnel, Laser-Hardened Materials Evaluation Laboratory, and Panel Test Facility test data. Results are presented for a baseline TPS layup that can withstand a 20 W/cm2 heat flux, silicon carbide (SiC) based TPS layup, and polyimide insulator TPS layup. Recent work has focused on developing material layups expected to survive heat flux loads up to 50 W/cm2 (which is adequate for many potential applications), future work will consider concepts capable of withstanding more than 100 W/cm2 incident radiant heat flux. This paper provides an overview of the experimental setup, material layup configurations, facility conditions, and planned future flexible TPS activities.

DelCorso, Joseph A.↗
NASA NTRS1982

Transport properties associated with carbon-phenolic ablators

Entry vehicle heat shields designed for entry into the atmosphere of the outer planets are usually made of carbonaceous material such as carbon-phenolic ablator. Ablative injection of this material is an important mechanism for reducing the heat at the surface of the entry vehicle. Conductive transport properties in the shock layer are important for some entry conditions. The kinetic theory of gases has been used to calculate the transport properties for 17 gaseous species obtained from the ablation of carbon-phenolic heat shields. Results are presented for the pure species and for the gas mixture.

Biolsi, L.↗
NASA NTRS1986

Performance evaluation of an entry research vehicle

The aerodynamic database upon which the missions and the proposed designs of an atmospheric entry research vehicle (ERV) would be based are discussed, along with a trajectory analysis of two missions proposed for the ERV. The ERV is intended as a means to explore reentry techniques, thermal protection systems and cross-range and orbital change maneuvers beyond the operational envelope of the Orbiter. The 25 ft long ERV would have a 13 ft wingspan, allowing it to be launched from the Orbiter bay. The ERV would have atmospheric maneuvering control surfaces and reaction control systems for orbital maneuvers. The total weight would be 12,000 lb. The aerodynamic design for the ERV was developed from wind tunnel, theoretical and Shuttle data for continuum, transition and free-molecule flight regimes. Typical flight profiles for intended missions are outlined.

Powell, R. W.↗
NASA NTRS2010

Roles of Engineering Correlations in Hypersonic Entry Boundary Layer Transition Prediction

Efforts to design and operate hypersonic entry vehicles are constrained by many considerations that involve all aspects of an entry vehicle system. One of the more significant physical phenomenon that affect entry trajectory and thermal protection system design is the occurrence of boundary layer transition from a laminar to turbulent state. During the Space Shuttle Return To Flight activity following the loss of Columbia and her crew of seven, NASA's entry aerothermodynamics community implemented an engineering correlation based framework for the prediction of boundary layer transition on the Orbiter. The methodology for this implementation relies upon similar correlation techniques that have been is use for several decades. What makes the Orbiter boundary layer transition correlation implementation unique is that a statistically significant data set was acquired in multiple ground test facilities, flight data exists to assist in establishing a better correlation and the framework was founded upon state of the art chemical nonequilibrium Navier Stokes flow field simulations. Recent entry flight testing performed with the Orbiter Discovery now provides a means to validate this engineering correlation approach to higher confidence. These results only serve to reinforce the essential role that engineering correlations currently exercise in the design and operation of entry vehicles. The framework of information related to the Orbiter empirical boundary layer transition prediction capability will be utilized to establish a fresh perspective on this role, and to discuss the characteristics which are desirable in a next generation advancement. The details of the paper will review the experimental facilities and techniques that were utilized to perform the implementation of the Orbiter RTF BLT Vsn 2 prediction capability. Statistically significant results for multiple engineering correlations from a ground testing campaign will be reviewed in order to describe why only certain correlations were selected for complete implementation to support the Shuttle Program. Historical Orbiter flight data on early boundary layer transition due to protruding gap fillers will be described in relation to the selected empirical correlations. In addition, Orbiter entry flight testing results from the BLT Flight Experiment will be discussed in relation to these correlations. Applicability of such correlations to the entry design problem will be reviewed, and finally a perspective on the desirable characteristics for a next generation capability based on high fidelity physical models will be provided.

Campbell, Charles H.↗