Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERRIMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Insulating ground state and 2−𝑘 magnetic structure of candidate Weyl hydrogen-atom K2⁢Mn3⁢(AsO4)3

The ideal Weyl "hydrogen-atom" semimetal exhibits only a single pair of Weyl nodes and no other trivial states at the Fermi energy. Such a material would be a panacea in the study of Weyl quasi-particles, allowing direct unambiguous observation of their topological properties. The alluaudite-like K2⁢Mn3⁢(AsO4)3 compound was recently proposed as such a material. Here, we use comprehensive experimental work and first-principle calculations to assess this prediction. We find K2⁢Mn3⁢(AsO4)3 crystallizes in the 𝐶⁢2/𝑐 symmetry with a quasi-one-dimensional Mn sublattice, growing as small needle-like crystals. Bulk property measurements reveal magnetic transitions at ≈8 and ≈4 K, which neutron scattering experiments show correspond to two distinct magnetic orders, first a partially ordered ferrimagnetic 𝐤𝟏=(0,0,0) structure at 8 K and a second transition of 𝐤𝟐=(1,0,0) at 4 K to a fully ordered state. Below the second transition, both ordering vectors are necessary to describe the complex magnetic structure with modulated spin magnitudes. Both of the best-fit magnetic structures in this work are found to break the symmetry necessary for the generation of Weyl nodes, though one of the magnetic structures allowed by 𝐤𝟏 does preserve this symmetry. However, the crystals are optically transparent and ellipsometry measurements reveal a large band gap, undermining expectations of semimetallic behavior. Density functional theory calculations predict an insulating antiferromagnetic ground state, in contrast to previous reports, and suggest potential frustration on the magnetic sublattice. Given the wide tunability of the alluaudite structure, we consider ways to push the system closer to a semimetallic state.

Taddei, Keith M [Argonne National Laboratory]↗

Thermally frustrated phase transition at high pressure in B 2-ordered FeV

X-ray diffraction measurements of equiatomic B2-ordered FeV were performed in a diamond-anvil cell at room temperature at several pressure points up to 80 GPa that showed the cubic phase to be stable with no indication of structural phase transitions. Density functional theory at 0 K predicts Fermi surface nesting, an electronic topological transition, and a phonon dynamical instability within the experimentally investigated pressure range. Nevertheless, the instability is absent in phonon dispersion curves extracted from ab initio molecular dynamics simulations below the critical volume at temperatures as low as 10 K, indicating that thermal atomic displacements can frustrate the phase transition by renormalizing the phonon dispersion curves. Ferrimagnetism is critical for the stability of the cubic phase at low temperature, but thermal atomic displacements are enough to support the structure at and above the Néel temperature.

36 MATERIALS SCIENCE↗

Impact of reduced dimensionality on the correlation length and magnetization dynamics of the spin chain cobaltite Ca 3 Co 2 O 6

We have recently applied the magnetic field and temperature dependence of magnetic entropy change as a probe of the magnetic states of a single crystal of Ca 3 Co 2 O 6 to establish a more comprehensive magnetic phase diagram for this exotic system. The results are consistent with the spin-density wave description of the ground state and indicate the suppression of the modulated state in favor of a ferrimagnetic up-up-down arrangement of the spin chains with the application of a moderate field. We demonstrate, in this study, that the features of the static magnetic phase diagram are preserved when the grain size of Ca 3 Co 2 O 6 is reduced to 440 nm (below the maximum c-axis correlation length of ~550 nm in Ca 3 Co 2 O 6 ), although the polycrystalline materials show a non-saturating behavior, rounded steps, and reduced magnetization when compared to the single crystal. Our new finding of the multiple low-temperature magnetization steps in the 440 nm sample, together with conflicting reports concerning such steps in nanostructured samples, suggests that correlations in the ab plane are more important than correlations along the c-axis in the appearance of the plateaus. The relaxation processes in the system are studied through the decay of remanent magnetization, ac susceptibility, and Argand diagrams. The introduction of grain boundaries in Ca 3 Co 2 O 6 weakens the slow-dynamic state, widens the low-temperature distribution of relaxation times, and lowers activation energies within the Arrhenius-like relaxation regime.

36 MATERIALS SCIENCE↗

Two-dimensional ferromagnetic superlattices

Mechanically exfoliated two-dimensional ferromagnetic materials (2D FMs) possess long-range ferromagnetic order and topologically nontrivial skyrmions in few layers. However, because of the dimensionality effect, such few-layer systems usually exhibit much lower Curie temperature (T C ) compared to their bulk counterparts. It is therefore of great interest to explore effective approaches to enhance their T C , particularly in wafer-scale for practical applications. Here, we report an interfacial proximity-induced high-T C 2D FM Fe 3 GeTe 2 (FGT) via A-type antiferromagnetic material CrSb (CS) which strongly couples to FGT. A superlattice structure of (FGT/CS) n , where n stands for the period of FGT/CS heterostructure, has been successfully produced with sharp interfaces by molecular-beam epitaxy on 2-inch wafers. By performing elemental specific X-ray magnetic circular dichroism (XMCD) measurements, we have unequivocally discovered that T C of 4-layer Fe 3 GeTe 2 can be significantly enhanced from 140 K to 230 K because of the interfacial ferromagnetic coupling. Meanwhile, an inverse proximity effect occurs in the FGT/CS interface, driving the interfacial antiferromagnetic CrSb into a ferrimagnetic state as evidenced by double-switching behavior in hysteresis loops and the XMCD spectra. Density functional theory calculations show that the Fe-Te/Cr-Sb interface is strongly FM coupled and doping of the spin-polarized electrons by the interfacial Cr layer gives rise to the T C enhancement of the Fe 3 GeTe 2 films, in accordance with our XMCD measurements. Strikingly, by introducing rich Fe in a 4-layer FGT/CS superlattice, T C can be further enhanced to near room temperature. Our results provide a feasible approach for enhancing the magnetic order of few-layer 2D FMs in wafer-scale and render opportunities for realizing realistic ultra-thin spintronic devices.

(Fe3GeTe2/CrSb)n superlattice↗

Magnetism and spin dynamics in room-temperature van der Waals magnet Fe 5 GeTe 2

Two-dimensional van der Waals (vdWs) materials have gathered a lot of attention recently. However, the majority of these materials have Curie temperatures that are well below room temperature, making it challenging to incorporate them into device applications. In this work, we synthesized a room-temperature vdW magnetic crystal Fe 5 GeTe 2 with a Curie temperature T c = 332 K, and studied its magnetic properties by vibrating sample magnetometry (VSM) and broadband ferromagnetic resonance (FMR) spectroscopy. The experiments were performed with external magnetic fields applied along the c -axis (H∥ c ) and the ab -plane (H∥ ab ), with temperatures ranging from 300 to 10 K. We have found a sizable Landé g -factor difference between the H∥ c and H∥ ab cases. In both cases, the Landé g -factor values deviated from g = 2. This indicates contribution of orbital angular momentum to the magnetic moment. The FMR measurements reveal that Fe 5 GeTe 2 has a damping constant comparable to Permalloy. With reducing temperature, the linewidth was broadened. Together with the VSM data, our measurements indicate that Fe 5 GeTe 2 transitions from ferromagnetic to ferrimagnetic at lower temperatures. Our experiments highlight key information regarding the magnetic state and spin scattering processes in Fe 5 GeTe 2 , which promote the understanding of magnetism in Fe 5 GeTe 2 , leading to implementations of Fe 5 GeTe 2 based room-temperature spintronic devices.

36 MATERIALS SCIENCE↗

The relation of magnetic properties and anomalous Hall behaviors in Mn4N (200) epitaxial films

Highlights: • Ferrimagnetic Mn4N(200) were grown on MgO(100) by plasma assisted molecular beam epitaxy. • We elucidate the relation of nitrogen vacancies and the magnetism by adjusting the growth pressure. • We state the relation of longitudinal resistivity and temperature as ρ{sub xx}∝T{sup 1.9994} (T ≤ 86K) and ρ{sub xx}∝T{sup 0.3068} (T > 86K) by data fitting. • We introduce a method to estimate the Debye temperature of Mn{sub 4}N materials and the residual resistance of 0 K. • We verify the linear relation between anomalou Hall resistivity (ρ{sub AH}) and magnetization at low magnetic field. - Abstract: The Mn{sub 4}N(200) films were grown on MgO(100) substrates by molecular beam epitaxy. The saturated magnetizations are 0.735 μB/f.u. and 0.892 μB/f.u. under pressure of 7.5 × 10{sup −6} mbar–9.5 × 10{sup −6} mbar. Increasing of growth pressure enhances the magnetism of Mn{sub 4}N due to the reduction of nitrogen vacancies. Debye temperature (T{sub D}) of Mn{sub 4}N is estimated to be 86 K. The longitudinal resistivity is linear to T{sup 1.9994} when T D , which coincides with electron-electron scattering of ferromagnetic coupling. The longitudinal resistivity originates from electron-electron scattering below T{sub D} since electron-phonon scattering is frozen. The longitudinal resistivity at 0 K is about 10% lower than 5 K as 7.085 μΩ cm. Mn{sub 4}N films show obvious anomalous Hall Effect in perpendicular magnetic fields. The anomalous Hall resistivity (ρ{sub AH}) of Mn{sub 4}N film is obtained by subtracting the ordinary Hall resistivity from transverse resistivity. The ρ{sub AH} is verified to be linear to magnetization at low magnetic field strength region (0–9 KOe).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Domain Wall Patterning and Giant Response Functions in Ferrimagnetic Spinels

Abstract The manipulation of mesoscale domain wall phenomena has emerged as a powerful strategy for designing ferroelectric responses in functional devices, but its full potential is not yet realized in the field of magnetism. This work shows a direct connection between magnetic response functions in mechanically strained samples of Mn 3 O 4 and MnV 2 O 4 and stripe‐like patternings of the bulk magnetization which appear below known magnetostructural transitions. Building off previous magnetic force microscopy data, a small‐angle neutron scattering is used to show that these patterns represent distinctive magnetic phenomena which extend throughout the bulk of two separate materials, and further are controllable via applied magnetic field and mechanical stress. These results are unambiguously connected to the anomalously large magnetoelastic and magnetodielectric response functions reported for these materials, by performing susceptibility measurements on the same crystals and directly correlating local and macroscopic data.

36 MATERIALS SCIENCE↗

Magnetocaloric effect in GdCo x Al 2-x system for (0.15 ≤ x ≤ 1) compositions

Structure and magnetic properties of the GdAl 2 -GdCo 2 system including magnetocaloric effect have been investigated for various compositions. The as-cast GdCo x Al 2-x alloys prepared by arc-melting crystallize in the dual-phase structure of cubic MgCu 2 -type and hexagonal MgZn 2 -type phases. All the as-cast dual-phase alloys exhibit only one magnetic phase transition near 77 K even though two ferrimagnetic phases coexist. The magnetic transition was broadened by the continuous transitions of the component phases, which resulted in enhancement of relative cooling power at the expense of the magnetic entropy changes.

36 MATERIALS SCIENCE↗

The Phase Diagram and Exotic Magnetostrictive Behaviors in Spinel Oxide Co(Fe1−xAlx)2O4 System

We report the magnetic and magnetostrictive behaviors of the pseudobinary ferrimagnetic spinel oxide system (1−x)CoFe2O4–xCoAl2O4 [Co(Fe1−xAlx)2O4], with one end-member being the ferrimagnetic CoFe2O4 and the other end-member being CoAl2O4 that is paramagnetic above 9.8 K. The temperature spectra of magnetization and magnetic susceptibility were employed to detect the magnetic transition temperatures and to determine the phase diagram of this system. Composition dependent and temperature dependent magnetostrictive behaviors reveal an exotic phase boundary that separates two ferrimagnetic states: At room temperature and under small magnetic fields (∼500 Oe), Fe-rich compositions exhibit negative magnetostriction while the Al-rich compositions exhibit positive magnetostriction though the values are small (<10 ppm). Moreover, the compositions around this phase boundary at room temperature (x = 0.35, 0.4, 0.45, 0.5) exhibit near-zero magnetostriction and enhanced magnetic susceptibility, which may be promising in the applications for magnetic cores, current sensors, or magnetic shielding materials.

36 MATERIALS SCIENCE↗

Less magnetic and larger Zr{sup 4+}–Zn{sup 2+} ions co-substituted structural and magnetic properties of ordered Li{sub 0.5}Fe{sub 2.5}O{sub 4} nanoparticles

Graphical abstract: - Highlights: • Zr{sup 4+} and Zn{sup 2+} co-substituted Li{sub 0.5}Fe{sub 2.5}O{sub 4}. • Crystallite size decreased with Zr{sup 4+} and Zn{sup 2+} co-substitution. • Magnetization results exhibit collinear ferrimagnetic structure for x = 0.2. • Yafet–Kittle angle exists between the observed and calculated magneton number. - Abstract: Samples of Zr{sup 4+} and Zn{sup 2+} co-substituted Li{sub 0.5}Fe{sub 2.5}O{sub 4} nanoparticles were prepared by the sol–gel auto-combustion method. The samples were obtained by annealing at relatively low temperature at 600 °C and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM) and Fourier transform infrared (FT-IR) spectroscopy. Lattice parameter, X-ray density, specific surface area and porosity were found to increase, whereas bulk density and crystallite size showed the decreasing trend with the Zr{sup 4+} and Zn{sup 2+} substitution. Cation distribution estimated from XRD results suggests that Zn{sup 2+} and Li{sup +} occupy tetrahedral A- and octahedral B-site respectively, whereas Zr{sup 4+} and Fe{sup 3+} occupy both the available sites. The FT-IR spectra show two major absorption bands at 715–749 cm{sup −1} (ν{sub 1}) and 484–507 cm{sup −1} (ν{sub 2}) related to spinel structure of ferrite. Magnetization results exhibit collinear ferrimagnetic structure for x ≤ 0.2, and changed to the non-collinear for x > 0.2. Observed and calculated magneton number shows discrepancy in their values that gives rise to Yafet–Kittle angle for x > 0.2.

36 MATERIALS SCIENCE↗

Giant coercivity and enhanced intrinsic anomalous Hall effect at vanishing magnetization in a compensated kagome ferrimagnet

Ferrimagnets that can be driven to magnetic compensation show promise for use in spintronics as they exhibit a finite anomalous Hall effect at zero magnetic field without having a substantial magnetic moment. Compensated ferrimagnet spintronic devices with both a large anomalous Hall effect and a high coercivity would be simultaneously easy to read and difficult to erase. The kagome ferrimagnet TbMn 6 Sn 6 has been reported to host a large intrinsic anomalous Hall effect. Here, we demonstrate that doping the Mn sites with Cr drives the system toward magnetic compensation. For nearly compensated compositions at low temperatures, giant coercive fields exceeding 14 T are observed. Additionally, Cr doping markedly enhances the intrinsic anomalous Hall effect, which can be attributed to a shift in the Fermi level. Our results extend the range of unique magnetic states observed in kagome materials, demonstrating that chemical doping is an effective strategy to tune and realize these states.

DeStefano, Jonathan M. [Univ. of Washington, Seatt↗

Band structure and itinerant magnetism in quantum critical NbFe2

We report first-principles calculations of the band structure and magnetic ordering in the C14 Laves phase compound NbFe{sub 2}. The magnetism is itinerant in the sense that the moments are highly dependent on ordering. We find an overestimation of the magnetic tendency within the local spin-density approximation, similar to other metals near magnetic quantum critical points. We also find a competition between different magnetic states due to band-structure effects. These lead to competing magnetic tendencies due to competing interlayer interactions, one favoring a ferrimagnetic solution and the other an antiferromagnetic state. While the structure contains Kagome lattice sheets, which could, in principle, lead to strong magnetic frustration, the calculations do not show dominant nearest-neighbor antiferromagnetic interactions within these sheets. These results are discussed in relation to experimental observations.

36 MATERIALS SCIENCE↗

Magnetic structure and multiferroicity of Sc-substituted hexagonal YbFeO 3

The hexagonal rare-earth ferrite RFeO 3 family represents a unique class of multiferroics exhibiting weak ferromagnetism, and a strong coupling between magnetism and structural trimerization is predicted. However, the hexagonal structure for RFeO 3 remains metastable in conventional conditions. We have succeeded in stabilizing the hexagonal structure of polycrystalline YbFeO 3 by partial Sc substitution of Yb. Using bulk magnetometry and neutron diffraction, we find that Yb 0.42 Sc 0.58 FeO 3 orders into a canted antiferromagnetic state with the Néel temperature T N ~ 165K, below which the Fe 3+ moments form the triangular configuration in the ab plane and their in-plane projections are parallel to the [100] axis, consistent with magnetic space group P6 3 c'm'. It is determined that the spin canting is aligned along the c axis, giving rise to the weak ferromagnetism. Furthermore, the Fe 3+ moments reorient toward a new direction below reorientation temperature T R ~ 40K, satisfying magnetic subgroup P6 3 , while the Yb 3+ moments order independently and ferrimagnetically along the c axis at the characteristic temperature T Yb ~ 15K. Interestingly, reproducible modulation of electric polarization induced by magnetic field at low temperature is achieved, suggesting that the delicate structural distortion associated with two-up/one-down buckling of the Yb/Sc planes and tilting of the FeO 5 bipyramids may mediate the coupling between ferroelectric and magnetic orders under magnetic field. Furthermore, the present work represents substantial progress to search for high-temperature multiferroics in hexagonal ferrites and related materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic and Magnetic Properties of Al Adsorption on α-Uranium(001) Surface: Ab Initio Calculations

First-principles calculations based on density functional theory with the generalized gradient approximation have been performed to study the aluminum (Al) adsorption on the (001) surface of α-uranium (α-U). The geometric, electronic and magnetic properties have been investigated at coverages of 0.25 and 0.5 monolayer. The results show that the quasi-trigonal sites are preferred at both coverages. The bonding of Al with U is found to be metallic, which mainly arises from the mixing of Al 3sp and U 5f states. A ferromagnetic phase is determined for the bare α-U(001) surface, while the adsorption of Al on the surface significantly perturbs the spin arrangement pattern and reduces the local magnetic moment, leading to a ferrimagnetic phase on the α-U(001) surface at the coverage of 0.5 monolayer. However, the Al overlayer is paramagnetic. Generally, the spin polarization has negligible effects on the geometric and electronic properties of Al atoms on the α-U(001) surface.

36 MATERIALS SCIENCE↗

Synthesis and characterization of Gd-doped magnetite nanoparticles

There has been rising interest in the synthesis of magnetite nanoparticles due to their importance in biomedical and technological applications. Tunable magnetic properties of magnetite nanoparticles to meet specific requirements will greatly expand the spectrum of applications. Tremendous efforts have been devoted to studying and controlling the size, shape and magnetic properties of magnetite nanoparticles. We investigate gadolinium (Gd) doping to influence the growth process as well as magnetic properties of magnetite nanocrystals via a simple co-precipitation method under mild conditions in aqueous media. Gd doping was found to affect the growth process leading to synthesis of controllable particle sizes under the conditions tested (0–10 at% Gd 3+ ). Typically, undoped and 5 at% Gd-doped magnetite nanoparticles were found to have crystal sizes of about 18 and 44 nm, respectively, supported by X-ray diffraction and transmission electron microscopy. These results showed that Gd-doped nanoparticles retained the magnetite crystal structure, with Gd 3+ randomly incorporated in the crystal lattice, probably in the octahedral sites. The composition of 5 at% Gd-doped magnetite was Fe (3-x) Gd x O 4 (x=0.085±0.002), as determined by inductively coupled plasma mass spectrometry. 5 at% Gd-doped nanoparticles exhibited ferrimagnetic properties with small coercivity (~65 Oe) and slightly decreased magnetization at 260 K in contrast to the undoped, superparamagnetic magnetite nanoparticles. Templation by the bacterial biomineralization protein Mms6 did not appear to affect the growth of the Gd-doped magnetite particles synthesized by this method.

36 MATERIALS SCIENCE↗

Electronic, magnetic, and optical properties of bulk and (1 1 1)-surfaces of CoMnZnSi quaternary Heusler alloy

The structural stability, electronic structure, and magnetic and optical properties of CoMnZnSi quaternary Heusler alloy (QHA) in the bulk and (1 1 1)-slab forms have been investigated by performing density functional theory (DFT) calculations. Formation and cohesive energies, and elastic constants confirm that the bulk CoMnZnSi is chemically and mechanically stable at an equilibrium lattice parameter of 5.81 Å. The calculated elastic constants also indicate that this QHA has ductile and anisotropic features. We investigate and discuss the bonding behavior from charge density distribution and density of states. Furthermore, these calculations in the bulk phase show a perfect half-metallic behavior with an integer value of magnetic moment (4 µB) and a large spin-flip gap of 0.39 eV. On the other hand, the Co (1 1 1) and Si (1 1 1)-slabs exhibit semi-metallic nature at the Fermi level. These results indicate that CoMnZnSi qualifies for spintronic applications. In the bulk and Co (1 1 1), Zn (1 1 1), and Si (1 1 1)-surfaces, the magnetic moment of Co and Mn atoms are ferromagnetically aligned, while the ferrimagnetic alignment of Co with Mn has been found in Mn (1 1 1)-surface. We also investigate the optimal conductivity, dielectric functions, reflectivity, absorption coefficient, refractive index, and loss function to understand the underlying optical properties of this alloy.

36 MATERIALS SCIENCE↗

Investigation of chemical vapor deposition of garnet films for bubble domain memories

The important process parameters and control required to grow reproducible device quality ferrimagnetic films by chemical vapor deposition (CVD) were studied. The investigation of the critical parameters in the CVD growth process led to the conclusion that the required reproducibility of film properties cannot be achieved with individually controlled separate metal halide sources. Therefore, the CVD growth effort was directed toward replacement of the halide sources with metallic sources with the ultimate goal being the reproducible growth of complex garnet compositions utilizing a single metal alloy source. The characterization of the YGdGaIG films showed that certain characteristics of this material, primarily the low domain wall energy and the large temperature sensitivity, severely limited its potential as a useful material for bubble domain devices. Consequently, at the time of the change from halide to metallic sources, the target film compositions were shifted to more useful materials such as YGdTmGaIG, YEuGaIG and YSmGaIG.

Besser, P. J.↗

Magnetic Properties of MFeCrO{sub 4} (M = Co/Ni) Prepared by Solution Combustion Method

Single phase MFeCrO{sub 4} (M = Co/Ni) nanosized samples are prepared by solution combustion method using glycine as fuel. Lattice parameter obtained after Rietveld refinement of the powder x-ray diffraction pattern of CoCrFeO{sub 4} and NiCrFeO{sub 4} samples are 8.374 and 8.325 Å and corresponding crystallite sizes are 40 and 27 nm, respectively. FTIR spectra of both samples show tetrahedral and octahedral metal oxygen bond stretching peaks at 596 and 488 cm{sup −1}, indicating spinel phase formation. DC magnetisation study indicates that both samples are ferrimagnetic at room temperature, with CoCrFeO{sub 4} having a higher value of saturation magnetisation. Mössbauer spectra indicate the presence of magnetic relaxation in the samples. Also, the strength of interaction with nearest neighbour Fe{sup 3+} cations is higher in NiCrFeO{sub 4}.

36 MATERIALS SCIENCE↗