Search NASA⌕ Search

SEARCH · Search NASA

Results for “Forward sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Spaceborne Remote Sensing of Hail: Retrievals, Climatologies, and Challenges Going Forward

In addition to the myriad threats that severe hailstorms pose to society, infrastructure and agriculture, severe hail is difficult to measure in situ, and surface-based hail reporting and detection methods are inconsistent and subject to geographical or societal biases. This motivates the use of spaceborne remote-sensing platforms to retrieve hail and construct climatologies in the most globally consistent way. Passive-microwave algorithms leverage the sensitivity of spaceborne passive-microwave radiometers to scattering by hail, particularly in the channels from 10 to 89 GHz. These retrievals are used to construct global climatologies of severe hail. The Bang and Cecil (2019) retrievals has been applied to several different spaceborne sensors: the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI), Global Precipitation Measurement Mission (GPM) Microwave Imager, Advanced Microwave Scanning Radiometer for EOS (AMSR-E), and Advanced Microwave Scanning Radiometer 2 (AMSR2) sensors and used to construct [near] global climatologies of severe hail. This retrieval, and others, have been tested using Global Precipitation Measurement (GPM) Ku-band precipitation radar, to assess their effectiveness and regional variability. A successful retrieval and climatology are those that correspond tightly to radar reflectivity and give minimal appearance of regional biases, especially with latitude. Satellite platforms offer consistent observations, even in remote, data-sparse, and oceanic regions that ground-based networks exclude. There are, however, potential disconnects between the processes identified aloft by the satellite and the resultant weather at the ground, leading to uncertainties in the retrievals that may propagate into satellite-based climatologies, particularly in the Tropics, where there are abundant strong - but not necessarily hailing - storms that are strongly represented in the current satellite climatologies. There are ongoing efforts to assess and mitigate the contributing factors to these uncertainties, chiefly among them the effects of non-uniform beam filling in the passive-microwave footprint, and the relationships between the size distributions of hailstones aloft and the dynamic processes and environments with which they interact throughout their trajectories.

Sarah D Bang↗

Characteristics and selection of near-fault simulated earthquake ground motions for nonlinear analysis of buildings

Earthquake-induced ground shaking near rupturing faults is highly sensitive to the rupture characteristics, seismic wave propagation patterns and site conditions, and field recordings of near-fault shaking are relatively sparse. These challenges complicate the assessment of the seismic performance of near-fault structures. A common approach to representing near-fault ground motion in engineering analysis is to explicitly consider and select records with strong directivity pulses (pulse records). We use three-dimensional high-resolution physics-based earthquake simulations to test this approach in the context of scenario-based ground motion record selection, and to study the important characteristics of near-fault ground shaking. We highlight the deficiencies associated with classifying near-fault simulated records as “pulse” or “non-pulse,” based on the presence of a single dominating pulse in the velocity time history. We show that this approach is inadequate for characterizing near-fault shaking on soft soils which can be dominated by both forward rupture directivity and basin amplification effects. We conduct ground motion selection experiments for the analysis of near-fault structures with and without explicit classification of the pulse features in the records, and evaluate the bias in the predicted structural demands. We find that the maximum interstory drift demands on building structures imposed by unscaled site-specific simulated ground motion records selected based on relevant spectral shape features are not sensitive to the classification of records as pulse/non-pulse. Therefore, with regard to predicting the maximum interstory drifts in near-fault buildings, we do not find justification for the binary pulse classification of near-fault records.

42 ENGINEERING↗

Impurity gas monitoring using ultrasonic sensing and neural networks: forward and inverse problems

Ultrasonic sensing is a non-invasive technique for monitoring impurity gas composition in various industrial applications where safety and regulatory compliance are crucial. In this study, ultrasonic sensing and neural networks were used to analyze impurity gases (i.e., air and argon) in helium. An experimental platform was established to acquire ultrasonic data. In the forward problem, an artificial neural network (ANN) model was used to forecast the response and time-of-flight (TOF) based on the excitation, and argon and air concentrations. The inverse problem was solved using a convolutional neural network (CNN) to predict the argon and air concentrations given the ultrasonic response and excitation. The results showed that the ANN accurately predicted the ultrasonic response and the change in TOF with concentration. As the air concentration was increased from 0 to 9.8%, the TOF sensitivity to detect argon decreased by 39.8% and 16.1% from ANN and sound speed theory, respectively. The CNN demonstrated high accuracy in predicting concentrations for inputs in the testing dataset. The application of the trained CNN indicated that it over-predicts air concentration while under-predicting the argon concentration. To improve accuracy, the predicted air and argon concentrations should be corrected by -0.992% and 1.027% bias, respectively.

47 OTHER INSTRUMENTATION↗

Spaceborne Passive-Microwave Hail Detection: Global Climatologies, Validation, and Challenges Going Forward

In addition to the myriad threats that severe hailstorms pose to society, infrastructure and agriculture, severe hail is difficult to measure in situ, and surface-based hail reporting and detection methods are inconsistent and vulnerable to nonmeteorological biases. This motivates the use of spaceborne remote-sensing platforms to retrieve hail and construct climatologies in a globally uniform way. We have developed a hail detection algorithm that leverages the sensitivity of spaceborne passive-microwave radiometers to scattering by hail, particularly in the channels from 10 to 89 GHz. We use this retrieval to construct global passive-microwave climatologies of severe hail using the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI), Global Precipitation Measurement Mission (GPM) Microwave Imager, Advanced Microwave Scanning Radiometer for EOS (AMSR-E), and Advanced Microwave Scanning Radiometer 2 (AMSR2) sensors and are working to extend into the pre-TRMM era to the Special Sensor Microwave Imager/Sounder (SSMI/(S)) data. Using coincident Global Precipitation Measurement (GPM) Ku-band precipitation radar, we assessed this retrieval and several others in the literature for their effectiveness and regional variability. We find that this retrieval, which leverages a signature in the Minimum 19-GHz polarization corrected temperature (PCT) combined with the 37-GHz PCT depression normalized by tropopause height constrains the radar reflectivity most tightly, and gives the least appearance of regional biases compared to other passive-microwave approaches in the literature. Satellite platforms offer consistent observations, even in remote, data-sparse, and oceanic regions that ground-based networks exclude. There are, however, potential disconnects between the processes identified aloft by the satellite and the resultant weather at the ground, leading to uncertainties in the retrievals that may propagate into satellite-based climatologies, particularly in the Tropics, where there are abundant strong - but not necessarily hailing - storms that are strongly represented in the current satellite climatologies. We will discuss ongoing efforts to assess and mitigate the contributing factors to these uncertainties, chiefly among them the effects of non-uniform beam filling in the passive-microwave footprint, and the relationships between the size distributions of hailstones aloft and the dynamic processes and environments with which they interact throughout their trajectories.

Sarah D. Bang↗

A multidimensional study of the structure function ratio $\sigma_{LT'}$/$\sigma_0$ from hard exclusive $\pi^+$ electro-production off protons in the GPD regime

A multidimensional extraction of the structure function ratio σ LT' /σ 0 from the hard exclusive $\vec{e}$p → e'nπ+ reaction above the resonance region has been performed. The study was done based on beam-spin asymmetry measurements using a 10.6 GeV incident electron beam on a liquid-hydrogen target and the CLAS12 spectrometer at Jefferson Lab. The measurements focus on the very forward regime (t/Q 2 $\ll$ 1) with a wide kinematic range of x B in the valence regime (0.17 < x B < 0.55), and virtualities Q 2 ranging from 1.5 GeV 2 up to 6 GeV 2 . The results and their comparison to theoretical models based on Generalized Parton Distributions demonstrate the sensitivity to chiral-odd GPDs and the directly related tensor charge of the nucleon. In addition, the data is compared to an extension of a Regge formalism at high photon virtualities. It was found that the Regge model provides a better description at low Q 2 , while the GPD model is more appropriate at high Q 2 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ozone vertical distribution retrieval from ground-based high resolution infrared solar spectra

A practical procedure for the retrieval of ozone vertical profiles from ground-based high resolution Fourier transform infrared solar spectra has been developed. The analysis is based on a multilayer line-by-line forward model and a semi-empirical version of the optimal estimation inversion method of Rodgers. The 1002.6-1003.2 cm(exp -1) spectral interval has been selected for the analysis on the basis of synthetic spectrum calculations. This interval contains numerous ozone lines covering a range of intensities and providing retrieval sensitivity from ground level to about 35 km. Characterization of the method and an error analysis have been performed. For a spectral resolution of 0.05-0.01 cm(exp -1) and a signal-to-noise ratio greater than or equal to 100 the retrieval is stable with a vertical resolution of approximately 5 km attainable near the surface degrading to approximately 10 km in the stratosphere. Synthetic spectra studies show that the a priori profile and weak constraints selected for the retrievals introduce no significant biases for a wide range of ozone profiles.

Pougatchev, N. S.↗

Flutter Calculations for an Experimental Fan

During testing, an experimental forward-swept fan encountered flutter at part-speed conditions. A three-dimensional propulsion aeroelasticity code, based on a computational fluid dynamics (CFD) approach, was used to model the aeroelastic behavior of this fan. This paper describes the flutter calculations and compares the results to the experimental measurements. Results of sensitivity studies are also presented that show the relative importance of different aspects of aeroelastic modeling.

Bakhle, Milind A.↗

Detecting Hail from Space: Algorithms, Climatologies, and Challenges Going Forward

In addition to the myriad threats that severe hailstorms pose to society, infrastructure and agriculture, severe hail is difficult to measure in situ, and surface-based hail reporting and detection methods are inconsistent and subject to geographical or societal biases. This motivates the use of spaceborne remote-sensing platforms to retrieve hail and construct climatologies in a globally uniform way. We have developed a hail detection algorithm that leverages the sensitivity of spaceborne passive-microwave radiometers to scattering by hail, particularly in the channels from 10 to 89 GHz. We use this retrieval to construct global climatologies of severe hail using several different spaceborne sensors: the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI), Global Precipitation Measurement Mission (GPM) Microwave Imager, Advanced Microwave Scanning Radiometer for EOS (AMSR-E), and Advanced Microwave Scanning Radiometer 2 (AMSR2) sensors and are working to extend into the late 1980’s using the Special Sensor Microwave Imager/Sounder (SSMI/(S)) data. Using coincident Global Precipitation Measurement (GPM) Ku-band precipitation radar, we assessed this retrieval and several others in the literature for their effectiveness and regional variability. We developed a passive-microwave algorithm that corresponds tightly to radar reflectivity and gives the least appearance of regional biases compared to other passive-microwave approaches in the literature. Satellite platforms offer consistent observations, even in remote, data-sparse, and oceanic regions that ground-based networks exclude. There are, however, potential disconnects between the processes identified aloft by the satellite and the resultant weather at the ground, leading to uncertainties in the retrievals that may propagate into satellite-based climatologies, particularly in the Tropics, where there are abundant strong - but not necessarily hailing - storms that are strongly represented in the current satellite climatologies. We will discuss ongoing efforts to assess and mitigate the contributing factors to these uncertainties, chiefly among them the effects of non-uniform beam filling in the passive-microwave footprint, and the relationships between the size distributions of hailstones aloft and the dynamic processes and environments with which they interact throughout their trajectories.

Sarah D Bang↗

Aeroelastic optimization of a helicopter rotor

Structural optimization of a hingeless rotor is investigated to reduce oscillatory hub loads while maintaining aeroelastic stability in forward flight. Design variables include spanwise distribution of nonstructural mass, chordwise location of blade center of gravity and blade bending stiffnesses (flap, lag and torsion). A comprehensive aeroelastic analysis of rotors, based on a finite element method in space and time, is linked with optimization algorithms to perform optimization of rotor blades. Sensitivity derivatives of blade response, hub loads, and eigenvalues with respect to the design variables are derived using a direct analytical approach, and constitute an integral part of the basic blade response and stability analyses. This approach reduces the computation time substantially; an 80 percent reduction of CPU time to achieve an optimum solution, as compared to the widely adopted finite difference approach. Through stiffness and nonstructural mass distributions, a 60-90 percent reduction in all six 4/rev hub loads is achieved for a four-bladed soft-inplane rotor.

Lim, Joon W.↗

Analysis of navigation performance for the Earth Observing System (EOS) using the TDRSS Onboard Navigation System (TONS)

Use of the Tracking and Data Relay Satellite System (TDRSS) Onboard Navigation System (TONS) was proposed as an alternative to the Global Positioning System (GPS) for supporting the Earth Observing System (EOS) mission. The results are presented of EOS navigation performance evaluation with respect to TONS based orbit, time, and frequency determination (OD/TD/FD). Two TONS modes are considered: one uses scheduled TDRSS forward link service to derive one way Doppler tracking data for OD/FD support (TONS-I); the other uses an unscheduled navigation beacon service (proposed for Advanced TDRSS) to obtain pseudorange and Doppler data for OD/TD/FD support (TONS-II). Key objectives of the analysis were to evaluate nominal performance and potential sensitivities, such as suboptimal tracking geometry, tracking contact scheduling, and modeling parameter selection. OD/TD/FD performance predictions are presented based on covariance and simulation analyses. EOS navigation scenarios and the contributions of principal error sources impacting performance are also described. The results indicate that a TONS mode can be configured to meet current and proposed EOS position accuracy requirements of 100 and 50 m, respectively.

Elrod, B.↗

Mid-Infrared Astronomy with the NGST

We present an overview of the science capabilities enabled by a mid-infrared camera/spectrometer on board the NGST. Even without full mid-IR optimization, a mid-infrared (5-30 microns) instrument on the NGST will be orders of magnitude more sensitive than any equivalent ground-based instrument/telescope combination. In the extragalactic arena, the mid-IR region is critical for a complete understanding of the or high-redshift universe, dusty star-formation regions at low and high redshifts, and starburst vs. AGN discrimination. In the local universe, great strides forward can be made using mid-IR imaging, spectroscopy, and coronagraphy of dusty and rocky disks of all ages, from protostellar to remnant debris disks. Near-neighbor detection and characterization can also be greatly advanced by mid-infrared observations.

Serabyn, E.↗

Observing System Simulations for Small Satellite Formations Estimating Bidirectional Reflectance

The bidirectional reflectance distribution function (BRDF) gives the reflectance of a target as a function of illumination geometry and viewing geometry, hence carries information about the anisotropy of the surface. BRDF is needed in remote sensing for the correction of view and illumination angle effects (for example in image standardization and mosaicing), for deriving albedo, for land cover classification, for cloud detection, for atmospheric correction, and other applications. However, current spaceborne instruments provide sparse angular sampling of BRDF and airborne instruments are limited in the spatial and temporal coverage. To fill the gaps in angular coverage within spatial, spectral and temporal requirements, we propose a new measurement technique: Use of small satellites in formation flight, each satellite with a VNIR (visible and near infrared) imaging spectrometer, to make multi-spectral, near-simultaneous measurements of every ground spot in the swath at multiple angles. This paper describes an observing system simulation experiment (OSSE) to evaluate the proposed concept and select the optimal formation architecture that minimizes BRDF uncertainties. The variables of the OSSE are identified; number of satellites, measurement spread in the view zenith and relative azimuth with respect to solar plane, solar zenith angle, BRDF models and wavelength of reflection. Analyzing the sensitivity of BRDF estimation errors to the variables allow simplification of the OSSE, to enable its use to rapidly evaluate formation architectures. A 6-satellite formation is shown to produce lower BRDF estimation errors, purely in terms of angular sampling as evaluated by the OSSE, than a single spacecraft with 9 forward-aft sensors. We demonstrate the ability to use OSSEs to design small satellite formations as complements to flagship mission data. The formations can fill angular sampling gaps and enable better BRDF products than currently possible.

small satellite↗

GC13I-0857: Designing a Frost Forecasting Service for Small Scale Tea Farmers in East Africa

Kenya is the third largest tea exporter in the world, producing 10% of the world's black tea. Sixty percent of this production occurs largely by small scale tea holders, with an average farm size of 1.04 acres, and an annual net income of $1,075. According to a recent evaluation, a typical frost event in the tea growing region causes about $200 dollars in losses which can be catastrophic for a small holder farm. A 72-hour frost forecast would provide these small-scale tea farmers with enough notice to reduce losses by approximately 80 USD annually. With this knowledge, SERVIR, a joint NASA-USAID initiative that brings Earth observations for improved decision making in developing countries, sought to design a frost monitoring and forecasting service that would provide farmers with enough lead time to react to and protect against a forecasted frost occurrence on their farm. SERVIR Eastern and Southern Africa, through its implementing partner, the Regional Centre for Mapping of Resources for Development (RCMRD), designed a service that included multiple stakeholder engagement events whereby stakeholders from the tea industry value chain were invited to share their experiences so that the exact needs and flow of information could be identified. This unique event allowed enabled the design of a service that fit the specifications of the stakeholders. The monitoring service component uses the MODIS Land Surface Temperature product to identify frost occurrences in near-real time. The prediction component, currently under testing, uses the 2-m air temperature, relative humidity, and 10-m wind speed from a series of high-resolution Weather Research and Forecasting (WRF) numerical weather prediction model runs over eastern Kenya as inputs into a frost prediction algorithm. Accuracy and sensitivity of the algorithm is being assessed with observations collected from the farmers using a smart phone app developed specifically to report frost occurrences, and from data shared through our partner network developed at the stakeholder engagement meeting. This presentation will illustrate the efficacy of our frost forecasting algorithm, and a way forward for incorporating these forecasts in a meaningful way to the key decision makers - the small-scale farmers of East Africa.

frost↗

Development and Lab-Scale Testing of a Gas Generator Hybrid Fuel in Support of the Hydrogen Peroxide Hybrid Upper Stage Program

As part of a NASA funded contract to develop and demonstrate a gas generator cycle hybrid rocket motor for upper stage space motor applications, the development and demonstration of a low sensitivity, high performance fuel composition was undertaken. The ultimate goal of the development program was to demonstrate successful hybrid operation (start, stop, throttling) of the fuel with high concentration (90+%) hydrogen peroxide. The formulation development and lab-scale testing of a simple DOT Class 1.4c gas generator propellant is described. Both forward injected center perforated and aft injected end burner hybrid combustion behavior were evaluated with gaseous oxygen and catalytically decomposed 90% hydrogen peroxide. Cross flow and static environments were found to yield profoundly different combustion behaviors, which were further governed by binder type, oxidizer level and, significantly, oxidizer particle size. Primary extinguishment was accomplished via manipulation of PDL behavior and oxidizer turndown, which is enhanced with the hydrogen peroxide system. Laboratory scale combustor results compared very well with 11-inch and 24-inch sub-scale test results with 90% hydrogen peroxide.

Lund, Gary K.↗

Technical Challenges Associated with In-Air Wingtip Docking of Aircraft in Forward Flight

Autonomous in-air wingtip docking of aircraft offers significant opportunity for system level performance gains for numerous aircraft applications. Several of the technical challenges facing wingtip docking of fixed-wing aircraft are addressed in this paper, including: close proximity aerodynamic coupling; mechanisms and operations for robust docking; and relative state estimation methods. A simulation framework considering the aerodynamics, rigid-body dynamics, and vehicle controls is developed and used to perform docking sensitivity studies for a system of two 5.5% scale NASA Generic Transport Model aircraft. Additionally, proof of- concept testing of a candidate docking mechanism designed to move the primary wingtip vortex inboard suggests the viability of such an approach for achieving robust docking.

Quinlan, Jesse R.↗

Dose-efficient automatic differentiation for ptychographic reconstruction

Ptychography, as a powerful lensless imaging method, has become a popular member of the coherent diffractive imaging family over decades of development. The ability to utilize low-dose X-rays and/or fast scans offers a big advantage in a ptychographic measurement (for example, when measuring radiation-sensitive samples), but results in low-photon statistics, making the subsequent phase retrieval challenging. Here, we demonstrate a dose-efficient automatic differentiation framework for ptychographic reconstruction (DAP) at low-photon statistics and low overlap ratio. As no reciprocal space constraint is required in this DAP framework, the framework, based on various forward models, shows superior performance under these conditions. It effectively suppresses potential artifacts in the reconstructed images, especially for the inherent periodic artifact in a raster scan. We validate the effectiveness and robustness of this method using both simulated and measured datasets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Field Validation of MVA Technology for Offshore CCS: Novel Ultra-High-Resolution 3D Marine Seismic Technology (P-Cable) (Final Report)

The objectives of the proposed study were to deploy and validate a specific monitoring technology, high-resolution 3D marine seismic (HR3D), appropriate for large-demonstration and commercial-scale offshore CCS sites. The project accomplished successful acquisition two HR3D seismic surveys. The first HR3D dataset was over the offshore injection site of the Tomakomai, Japan integrated pilot CCS project, which at the time of survey acquisition was actively injecting CO 2 . The first survey also represented a successful international collaboration between the DOE NETL program and Japan’s national CCS program and was the first successful acquisition and use of HR3D over an active CO 2 injection site (Meckel, Feng et al. 2019). The Tomakomai HR3D survey successfully tested a novel 4-streamer HR3D system array in which, for the first time, no cross-cable (aka “P-Cable”) was utilized and only four GeoEel streamers were used instead of the standard 12-streamer configuration. Consequently, this was not, strictly speaking, a deployment of the “P-Cable” system of (Planke and Berndt 2004) but rather a modified version, thereof, and it is the first known demonstration of the modified system configuration. One very positive outcome from the Japanese collaboration earlier in the project was the ability to learn from the Japanese how they used tail buoys with GPS to determine the position of the seismic source and receivers in time and space. Based on that experience, GCCC designed and built six GPS receivers that could be used to position the streamer receivers and the seismic source via tail buoys. A fundamental advance that was made on the original design, was the ability to directly power the tail buoy GPS units and transfer data through the streamers (i.e., vs. the batteries used at Tomakomai). The bulkiness of the GPS batteries caused drag and episodic surging of the buoys, which affected data quality by lifting up the tail end of the streamers so the receivers were not at the same depth. The units were tested onshore for accuracy and functionality, and the design was subsequently and successfully tested in marine acquisition mode during the SLP survey acquisition. The marine acquisition test and survey satisfied Subtasks 2.2.2, Novel Positioning Technology Selection and Subtask 2.2.3, Novel Positioning Technology Deployment. Results of the novel positioning technology selection (Subtask 2.2.2) were considered successful and will be incorporated in future HR3D seismic acquisition projects to reduce costs, improve deployment safety at sea, and integrate both seismic and data recording via a single data transfer through the streamers to the recording system. The project also established a permitting process through NETL NEPA compliance, which included an Environmental Assessment in a marine setting and is required for conducting these types of surveys using Federal funding. The permitting process charted a “boilerplate,” which can allow future surveys related to other funded projects to move forward more expeditiously. Future improvements that could be considered are more robust seals on the GPS module and stronger materials (especially joints) on tail buoy fabrication. These would increase fixed costs, but would be advisable and probably more economic long-term if multiple HR3D surveys are planned. Project Accomplishments include: • Pre-survey Sensitivity Study • Marine geochemistry methods and data analysis • Successful HR3D seismic dataset acquired @ Tomakomai active CO 2 injection marine site • Developed advanced seismic processing techniques • No NRMS anomalies detected in overburden; Demonstration of containment • Repeatability study • Second survey collected @ San Luis Pass, TX • 4D application using positioning techniques developed in the project for monitoring were successful

3D seismic GPS positioning↗

A scattering model for rain depolarization

A method is presented for calculating the amount of depolarization caused by precipitation for a propagation path. In the model the effects of each scatterer and their interactions are accounted for by using a series of simplifying steps. It is necessary only to know the forward scattering properties of a single scatterer. For the case of rain the results of this model for attenuation, differential phase shift, and cross polarization agree very well with the results of the only other model available, that of differential attenuation and differential phase shift. Calculations presented here show that horizontal polarization is more sensitive to depolarization than is vertical polarization for small rain drop canting angle changes. This effect increases with increasing path length.

Wiley, P. H.↗