Search NASA⌕ Search

SEARCH · Search NASA

Results for “GAS CHROMATOGRAPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Organic solids produced by electrical discharge in reducing atmospheres - Tholin molecular analysis

The complex dark brown solid of a class called tholins, produced on passage of an electrical discharge through a roughly equimolar mixture of methane and ammonia with 2.6% water vapor, is analyzed by vacuum pyrolysis followed by gas chromatography and mass spectrometry. Pyrolyzates include a wide range of aliphatic and aromatic nitriles, alkanes, alkenes, aromatic hydrocarbons, pyrrole, and pyridine. This tholin is remarkably stable to 950 C. It and its degradation products are candidate constituents of planetary aerosols in the outer solar system and of the grains in the interstellar medium.

Khare, B. N.↗

In situ aircraft measurements of enhanced levels of N2O associated with thunderstorm lightning

A series of measurements of enhanced levels of atmospheric N2O associated with thunderstorm lightning are reported. The data were gathered by instrumentation on-board an aircraft operated as part of the NASA Storm Hazards Project. Air samples were taken both during storms and in clear conditions to have a basis for comparisons; sample bottles were filled at altitudes from 11,000-40,000 ft. Gas chromatography was employed for sample composition analyses, revealing clear air N2O concentrations of about 310 ppbv, while storm concentrations reached, for example, 490, 729, and 393 ppbv. Although the measurements did not precisely characterize the actual lightning contributions, the enhancements being present during electrically active storms did confirm that trace gases are produced by lightning. Calculations are presented to demonstrate that the 3 to greater than 12 keV X rays detected in storm clouds are of sufficient energy to drive the production of N2O from the reaction of metastable nitrogen with molecular oxygen.

Levine, J. S.↗

The retrieval of atmospheric constituent mixing-ratio profiles from solar absorption spectra

Methods used to determine various atmospheric gas distributions are summarized. The experimentally determined mixing ratio profiles (the mixing ratio of a gas is the ratio of the number of gas molecules to the number of air molecules) of some atmospheric gases are shown. In most in situ experiments stratospheric gas samples are collected at several altitudes by balloon, aircraft, or rocket. These samples are then analyzed by various methods. Mixing ratio profiles of Ci, ClO, and OH were determined by laser induced fluorescence of samples. Others have analyzed gas samples by gas chromatography in order to determine the molecular abundances of CCl2F2, CCl4, CCl3F, CFCl3, CF2Cl2, CHClF2, CH3CCl3, CH4, CO, C2Cl3F3, C2Cl4, C2HCl3, C2H2, C2H4, C2H6, C3H8, C6H6, C7H8, H2, and N2O.

Shaffer, W. A.↗

Air-sampling inlet contamination by aircraft emissions on the NASA CV-990 aircraft

Results of an experimental investigation of the contamination of air sampling inlets by aircraft emissions from the NASA CV-990 research aircraft are presented. This four-engine jet aircraft is a NASA facility used for many different atmospheric and meteorological experiments, as well as for developing spacecraft instrumentation for remote measurements. Our investigations were performed to provide information on which to base the selection of sampling locations for a series of multi-instrument missions for measuring tropospheric trace gases. The major source of contamination is the exhaust from the jet engines, which generate many of the same gases that are of interest in atmospheric chemistry, as well as other gases that may interfere with sampling measurements. The engine exhaust contains these gases in mixing ratios many orders of magnitude greater than those that occur in the clean atmosphere which the missions seek to quantify. Pressurized samples of air were collected simultaneously from a scoop located forward of the engines to represent clean air and from other multiport scoops at various aft positions on the aircraft. The air samples were analyzed in the laboratory by gas chromatography for carbon monoxide, an abundant combustion by-product. Data are presented for various scoop locations under various flight conditions.

Condon, E. P.↗

Analyses via automated mass spectrometry (MS/DS)

New or improved uses of the Finnigan 4000 quadrupole mass spectrometer (MS) with its associated INCOS data system (DS) were investigated. The first phase involved an evaluative activity in which specific problems with miscalibration and gas chromatographic column conditioning were identified. This also revealed one solution to the problem of detection of substances not visible in the gas chromatography detection mode. A second phase was to seek useful applications of the direct inlet systems. This mode of sample introduction has not been previously utilized on the existing equipment and was successfully applied to the analysis of the components of TONOX 60/40 and in the thermal degradation products of some polymeric materials. Suggestions are made for improving and expanding the use of the MS/DS system in materials development and testing.

Koenig, T.↗

Applications of high pressure differential scanning calorimetry to aviation fuel thermal stability research

High pressure differential scanning calorimetry (DSC) was studied as an alternate method for performing high temperature fuel thermal stability research. The DSC was used to measure the heat of reaction versus temperature of a fuel sample heated at a programmed rate in an oxygen pressurized cell. Pure hydrocarbons and model fuels were studied using typical DSC operating conditions of 600 psig of oxygen and a temperature range from ambient to 500 C. The DSC oxidation onset temperature was determined and was used to rate the fuels on thermal stability. Kinetic rate constants were determined for the global initial oxidation reaction. Fuel deposit formation is measured, and the high temperature volatility of some tetralin deposits is studied by thermogravimetric analysis. Gas chromatography and mass spectrometry are used to study the chemical composition of some DSC stressed fuels.

Neveu, M. C.↗

Ambient air contamination: Characterization and detection techniques

Techniques to characterize and detect sources of ambient air contamination are described. Chemical techniques to identify indoor contaminants are outlined, they include gas chromatography, or colorimetric detection. Organics generated from indoor materials at ambient conditions and upon combustion are characterized. Piezoelectric quartz crystals are used as precision frequency determining elements in electronic oscillators.

Nulton, C. P.↗

Gas chromatographic separation of nitrogen, oxygen, argon, and carbon monoxide using custom-made porous polymers from high purity divinylbenzene

Existing porous polymers were surveyed for their ability to separate the subject gases. Certain products that showed more promise than others were synthesized and the existing synthetic procedures studied and modified to produce new polymers with enhanced ability to separate the subject gases. Evaluation of the porous polymers was carried out practically by gas chromatography at ambient temperature. The modified synthetic procedures were somewhat simpler than the originals. The new porous polymers made with high purity divinylbenzene enabled use of shorter columns to obtain the separations desired.

Pollock, G. E.↗

Evaluation of catalyst for closed cycle operation of high energy pulsed CO2 lasers

Several catalyst materials have been tested for efficiency of converting CO and O2 to CO2 for use in a high energy CO2 laser. The composition of the gas mixtures was monitored by mass spectrometry and gas chromatography. A copper/copper oxide catalyst and a platinum/tin oxide catalyst were used for closed cycle operation of a CO2 laser (0.7 joules/pulse), operating at 10 pulses/sec.

Rogowski, R. S.↗

Mechanistic studies related to the safety of Li/SOCl2 cells

Mechanistic studies of the reactions in Li-SOCl2 cells have been undertaken to improve understanding of the safety problems of these cells. The electrochemical reduction of 1.5M LiAlCl4/SOCl2 has been investigated using gas chromatography, electron spin resonance spectroscopy, and infrared spectroscopy. Cl2 and S2Cl2 have been identified as intermediates in the reduction of SOCl2, along with a radical species (g/xx/ = 2.004, g/yy/ = 2.016, g/zz/ = 2.008) and the proposed triplet ground-state dimer of this radical. SO2 and sulfur have been identified as products. Based upon these findings, a mechanism for the electrochemical reduction of 1.5M LiAlCl4/SOCl2 has been proposed, and its implications for safety of Li-SOCl2 cells during discharge to +0.5V at 25-30 C are discussed.

Carter, B. J.↗

The radiolysis and radioracemization of amino acids on clays

The effects of the surfaces of kaolinite and bentonite clays on the radiolysis and radioracemization of L-leucine and its hydrochloride salt have been investigated experimentally. L-leucine and its hydrochloride salt were deposited on the clays and the amino acid/clay preparations were irradiated by a Co-60 gamma-ray source which induced 2-89 percent radiolysis. The efficiency of radiolysis and radioracemization were measured using gas chromatography. Results were obtained for leucine in 0.1 M aqueous solution for comparison with the clay-deposted leucine and leucine hydrochloride. It is found that radiolysis and radioracemization in the samples occurred according to a pseudo-first-order rate law. Comparison of the specific rate constants showed that leucine and its hydrochloride salt were the most resistant to both radiolysis and radioracemization, followed by leucine and its hydrochloride salt on kaolin. Leucine and its HCl salt on bentonite, and leucine in aqueous solution were found to be the least resistant to radiolysis and radioracemization. The experimental results are intepreted with respect to the Vester-Ulbricht mechanism for the origin of optical activity.

Bonner, W. A.↗

Space bio-technology in housing

Gas chromatography and mass spectrometry data obtained from monitoring atmospheric pollutants in Skylab spurred studies of indoor pollutants in terrestrial buildings. Subsequent studies of techniques for removing the pollutants from space habitats have led to building concepts which achieve the same purpose on earth. The Skylab data indicated that the synthesized organic materials used in many modern buildings, furnishings, personal clothing and aerosols add significant amounts of chemicals to the indoor atmosphere. Lowered circulation and ventilation rates to conserve energy have caused trapping of these substances in buildings. Studies of methods for space modules which will use plants and microbes to absorb airborne and wastewater pollutants have defined biotechnology designs which can be applied to remove pollutants from air and wastewater organically. Plant roots trap pollutants from wastewater and leaves readily absorb air pollutants, as well as improve the overall energy efficiency of buildings. Several designs which incorporate biotechnology to enhance both the aesthetics and efficiency of homes and office buildings are illustrated.

Wolverton, B. C.↗

Chemistry of the outer planets: Investigations of the chemical nature of the atmosphere of Titan

It is clear from the experiments that a variety of complex organic models can be produced by lightning in a Titan-like gas mixture. The dominant products were found to be acetylene and hydrogen cyanide, with smaller amounts of many other species. Any aerosol produced by lightning inititated process will consist of a complex mixture of organic compounds, many of which should easily be identified by pyrolytic gas chromatography. Work will continue to expand the data base of molecules produced by lightning and other processes in order to assist in the design of appropriate analytical instruments for the upcoming Saturn/Titan mission and any other planetary probes.

Scattergood, Thomas W.↗

Origin and evolution of osmoregulatory mechanisms in blue-green algae (cyanobacteria) as a function of metabolic and structural complexity: Reflections of Precambrian paleobiology

Major accomplishments underlying the basic understanding of cyanobacterial resistance to salt tolerance and osmotic stress were made. The methodology proposed included: the tracing of the pathways of formation of osmoregulatory solutes by traditional methods involving C-14 labelled substrates; gas chromatography; amino acid analysis; X-ray analysis using scanning transmission electron microscopy; and most importantly, C-13 labelled substrates, followed by Nuclear Magnetic Resonance (NMR) spectroscopy. It was found that the cyanobacteria employ a diversity of organic, osmoregulatory solutes. Osmoregulatory solutes were found to serve four functions: adjustment of water activity, noninhibition of enzymes; lowering of K sub m of enzymes to allow functioning at normal levels when the intracellular salt accumulates, and extending the pH optimum of enzymes as intracellular pH rises due to proton-potassium ion pump action during osmoregulation. Differences in osmoregulatory solutes may, but are not always, be attributed to differences in nutritional capabilities. The mechanism of osmoregulation and concomitant salt tolerance in halophilic cyanobacteria was elucidated. The activities of betaine and S-Adenosylhomocysteine hydrolase are discussed.

Yopp, John H.↗

Gas filter radiometer for carbon monoxide measurements during the 1979 Summer Monsoon Experiment (MONEX)

The instrumental and data-reduction techniques used in obtaining remote measurements of carbon monoxide during the 1979 Summer Monsoon Experiment are described. The form of the signal function (the variation of signal with altitude) and the impact of variations in the vertical distribution of carbon monoxide are discussed. Estimates of the experimental accuracy are made both by assessment of error sources through the use of numerical simulations and by comparison with concurrent measurements made by means of gas chromatography. It is found that the radiometric measurements tend to be about 9 percent lower than the direct measurements and to have a precision of about 8 percent.

Reichle, H. G., Jr.↗

Degradation mechanisms of sulfur and nitrogen containing compounds during thermal stability testing of model fuels

The degradation behavior of n-dodecane (singly or in combination with S- and N-containing dopants) was studied using a modified Jet Fuel Thermal Oxidation Tester facility between 200 and 400 C. The products were analyzed by gas chromatography and mass spectrometry. The soluble products consisted mainly of n-alkanes and 1-alkenes, aldehydes, tetrahydrofuran derivatives, dodecanol and dodecanone isomers, C21-C24 alkane isomers, and dodecylhydroperoxide (ROOH) decomposition products. The major products were always the same, with and without dopants, but their distributions varied considerably. The 3,4-dimercaptotoluene and dibutylsulfide dopants added individually to n-dodecane interferred with the hydrocarbon oxidation at the alkylperoxy radical and the alkylhydroperoxide link, respectively, while the 2,5-dimethylpyrrole dopant inhibited ROOH formation. Pyridine, pyrrole, and dibenzothiophene added individually showed few significant effects.

Reddy, K. T.↗

Light hydrocarbons from plasma discharge in H2-He-CH4 - First results and Uranian auroral chemistry

The production of light hydrocarbons by precipitating magnetospheric electrons in the Uranian stratosphere is simulated in laboratory experiments. The products of continuous-flow glow discharges of H2-He-CH4 mixtures containing 0.0012 or 0.022 mol pct CH4 at pressures 0.63-57 mbar are trapped at 77 K, measured manometrically, and identified by gas chromatography and mass spectroscopy; the results are presented in tables and characterized in detail. The globally averaged rate for the production of higher hydrocarbons by this mechanism on Uranus is estimated as 3 x 10 to the 6th C/sq cm sec and shown to be similar to that for photochemical production, while the local rate for the auroral zones is significantly higher than the corresponding photochemical rate. A decrease in yield with increasing molecular complexity is also noted.

Thompson, W. Reid↗

Modified reaction mechanism of aerated n-dodecane liquid flowing over heated metal tubes

The degradation mechanism of the n-dodecane was studied using a modified jet fuel thermal oxidation tester containing a sample withdrawal system as a reaction vessel. The reaction products were identified using gas chromatography and mass spectorometry. The soluble products were found to consist mainly of C5-C10 n-alkanes and 1-alkenes, C7-C10 aldehydes, tetrahydrofuran derivatives, dodecanol and dodecanone isomers, dodecyl hydroperoxide (ROOH) decomposition products, and C24 alkane isomers. The data from the experiments agreed with those of Hazlett et al. (1977). It was found that alkyl peroxide radical reactions dominate in the autooxidation temperature regime (at T not above 300 C); the dominant path is for the alkyl peroxyl radical to react bimolecularly with fuel to yield primarily alkyl hydroperoxides. The alkyl peroxide radical also undergoes self-termination and unimolecular isomerization and decomposition reactions, to yield smaller amounts of C12 alcohol plus ketone products and tetrahydrofuran derivatives, respectively.

Reddy, K. T.↗