SEARCH · Search NASA

Results for “JAXA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS2022

Multi-Frequency Radiometer-Based Soil Moisture Retrieval and Algorithm Parameterization Using In Situ Sites

L-band brightness temperature (TB) has been shown to provide the best sensitivity to soil moisture (SM) although C- and X-band based products offer a longer time-series from satellite-based measurements. Currently, global coverage SM is routinely produced from spaceborne measurements using all three frequency bands, but despite continued validation efforts of the products, the relative characteristics and performance of these observations have not been fully established. Therefore, this study focused on the parametrization of SM retrieval algorithms at L-, C- and X-bands using TB observations from the L-band radiometer on NASA's SM Active Passive (SMAP) mission and the C- and X-band channels of JAXA's Advanced Microwave Scanning Radiometer 2 (AMSR2) onboard the GCOM-W satellite. These can be applied in global SM retrieval algorithms using either one of the frequencies or a combination of them. The reference in situ SM data was obtained from 12 core validation sites across various land cover types around the world. The investigation highlighted the known challenges of retrieving SM from C- and X-band data compared to the higher sensitivity of the L-band data. Even with a site-specific retrieval algorithm parameterization, the mean correlation of the C- and X-band retrievals for the core validation site SM measurement were much lower than that for L-band, being 0.52 (0.54) and 0.45 (0.47) for vertical (horizontal) polarization, respectively, while for the L-band retrieval the corresponding values were 0.81 (0.77). The parameterization exercise showed that matching the C- and X-band TB measurements with an emission model was not difficult; the problem was relating the observations to SM under the influence of large roughness and vegetation effects. As a result, parameter optimization produced values for some sites that were not realistic or did not allow any practical sensitivity to SM at C- and X-band. Considering the L-band observations, the parameter optimization resulted in superior bias performance as compared to the operational SMAP product parameterization, but the sensitivity to SM changes (R and unbiased root mean square difference) did not improve markedly, or in some cases degraded at the expense of a smaller bias.

passive microwave↗

NASA NTRSDate not supplied

Advancing Dust Tolerant Mechanisms for a Sustained Exploration of the Moon

Introduction: “I think dust is probably one of our greatest inhibitors to a nominal operation on the Moon. I think we can overcome other physio-logical or physical or mechanical problems except dust.”– Gene Cernan, Apollo 17 Technical Debrief The Apollo missions revealed the impact of lu-nar dust on mechanisms. Lunar dust particles are jagged and electrostatically charged, giving them the ability to bind or damage mechanisms and alter thermal properties. Reports documented clogged equipment and jammed mechanisms in every mission, regardless of surface duration, as well as clogged mechanisms in the Extravehicular Mobility Suit (EMS), including zippers, wrist and hose locks, faceplates, and sunshades [1-2]. Several astronauts remarked they could not have sustained surface activity much longer because clogged joints would have frozen up completely [2]. Effective dust mitigation strategies are need-ed to support longer duration stays on the lunar surface [3-4]. State of the Art: Technology for mechanisms able to operate in dusty enviroments is advancing rapidly due to the needs of both Mars rovers and the Artemis program. Vacuum-tight connectors are essential for spacesuits and habitats, and their performance can be dependent on cleaning technologies, which have proven difficult on the lunar surface. Several TRL 3-5 technologies are undergoing tests with the expectation to reach TRL 6 within 1-2 years. Some mechanisms will be infused and tested on the VIPER (Volatiles Inves-tigating Polar Exploration Rover) mission planned for mid-2020s. NASA Funded Efforts: NASA has recognized the need for dust tolerant mechanisms, and has partnered with industry to advance the state-of-the-art. At NASA GRC, KSC, and JSC, the Dust Tolerant Mechanisms Project is working to devel-op advanced actuator seals for rotary joints and rotary bearing technologies for long-term sus-tained operation in lunar dust environments. An-other NASA project at NASA GRC, partnered with GSFC, JPL, and KSC is Motors for Dusty & Ex-treme Cold Environments (MDECE). MDECE is developing an unheated magnetically-geared mo-tor that can operate continuously for a long dura-tion at an ambient temperature of -243 ºC (33 K). NASA GRC has the capability to characterize the effects of dust on seals, mechanisms, and other mating surfaces and components under lunar conditions [5]. Through the SBIR/STTR program, NASA has funded several companies to advance dust toler-ant mechanisms via the Dust Tolerant Mecha-nisms sub-topic with applications in surface mobil-ity, spacesuits, connectors, joints, and more. LSIC and Community Efforts: The Lunar Surface Innovation Consortium (LSIC) Dust Miti-gation focus group has fostered collaborations across NASA, industry, and academia to develop solutions that minimizes the impact of lunar dust on robotic and human systems. Community ef-forts have included topical meetings on dust tol-erant mechanisms, featured technology presenta-tions, and feedback to NASA on potential gaps and needs. Testing: In 2021, NASA released NASA-STD-1008 [6]. This NASA Technical Standard estab-lishes minimum requirements and provides guid-ance for testing systems and hardware to be ex-posed to dust in planetary environments. The standard has specific sections dedicated to Mechanisms Testing (e.g. bearings, gears) as well as Seals and Mating Surfaces Testing (e.g. hatches, docking systems). Gaps and Needs: NASA is tracking dust tol-erant mechanisms as a gap in a cross-directorate analysis of capability areas needed to enable fu-ture human space-flight architectures. Two high-priority gap areas include additional facilities for testing mechanisms in lunar-surface conditions, and a better understanding of vulnerabilities to the smallest, nanometer-scale dust particles. Conclusion: Understanding and mitigating lu-nar dust is critical to successful, sustained opera-tions on the lunar surface – whether autonomous or otherwise. This presentation will discuss both the state-of-the-art and open needs in lunar dust tolerant mechanisms, technology impacts, mitiga-tion approaches, testing, LSIC community efforts, and more. References: [1] Gaier, J. R. (2020). The Im-pact of Dust on Lunar Surface Equipment During Apollo. Lunar Dust 2020. [2] GRC, & Gaier, J. R. (2005). The Effects of Lunar Dust on EVA Sys-tems During the Apollo Missions. [3] Johansen, M. R. (2020). An Update on NASA’s Lunar Dust Mitigation Strategy. Lunar Dust 2020. [4] ASI, CSA, ESA, JAXA, & NASA. (2016). Dust Mitiga-tion Gap Assessment Report. [5] Jimenez, N. et al (2022), LPSC Abstract 2572. [6] NASA-STD-1008, 2021.

J I Nunez↗

NASA NTRS2022

Lithological variation of asteroid Ryugu samples returned by the Hayabusa 2 spacecraft: Assessment from the 18 particles distributed to the initial analysis “Stone” team

JAXA’s Hayabusa2 spacecraft successfully returned~5.4g of C-type asteroid Ryugu materials on Dec. 2020 [e.g., 1] and the recovered samples were extensively analyzed by initial analysis teams and Phase2 curation teams. The reported results show that Ryugu samples are similar to CI chondritesin chemistry and mineralogy, showing evidence for aqueous alteration in the parent body [e.g., 2,3]. As a “stone” team of the initial analysis, we received 18coarse particles (>1 mm) of Ryugu samples to characterize their mineralogy and petrology. We found that the samples were breccias of mm-to-sub mm size clasts. All of the clasts are mainly composed of Mg-Fe phyllosilicates, but the alteration degree appears slightly different from one clast to another. Here we report a lithological variation of Ryugu samples to propose their reasonable lithological classification based upon different mineral assemblages and to discuss the formation and evolution of the Ryugu parent body.

Michael E Zolensky↗

NASA NTRSDate not supplied

Application of Earth Observation Data for Improved Environmental and Disaster Monitoring in Central America

Since its establishment in 1991, the Central American Integration System (SICA, in Spanish) has served as a force for integrating the eight countries of Central America and the Dominican Republic, and in recent years, SICA’s General Secretariat and its various technical secretariats have focused on integrating Earth observations into various regional and national processes. In 2019, for instance, a joint statement was signed between SICA’s General Secretariat and NASA, toward strengthening the region’s use of Earth observations. SICA has also pursued cooperation with the Group on Earth Observations’ AmeriGEO regional initiative, the Japanese Aerospace Agency (JAXA), the United Nations Office of Outer Space Affairs (UNOOSA), and the Copernicus program, among others. Just in the framework of the NASA-SICA Joint Statement, and towards the goal of strengthening the region’s use of Earth observations across sectors, a large number of training webinars has been conducted, particularly benefiting national institutions, non-governmental organizations, and universities. Additionally, targeted support has been provided in the areas of environmental monitoring and disaster management. From 2019 through 2021, for instance, a number of feasibility studies were implemented by NASA’s DEVELOP program in collaboration with SICA technical secretariats. In 2020, in response to devastating Hurricanes Eta and Iota, the SERVIR program also provided support for extending the HYDRAFloods algorithm which had been originally developed for the Mekong to Central America. Support is also being provided toward monitoring land cover change across the Mesoamerican Biological Corridor. In the framework of the “observing the Earth for the benefit of all” theme, this presentation will also focus on how Central America can serve as a case study for the development of Earth observation capacity, applicable to other regions of the world.

applied sciences↗

NASA NTRSDate not supplied

Validation of Ullage Collapse Due to Violent Lateral Slosh

Understanding the coupling between thermodynamics and propellant sloshing is important for cryogenic upper stages, especially during the lift-off phase and in missions including multiple engine restarts, as the fluid dynamic condition of the propellant is mainly influenced by various flight maneuvers. This paper describes the development and validation of a Volume of Fluid (VOF)-based CFD solver, Loci/STREAM-VOF, to the ullage collapse under violent later slosh conditions. Loci/STREAM-VOF is shown to be able to capture detailed slosh dynamics, including slosh frequency, non-linear slosh damping, and violent surface breakup due to forced acceleration. The comparison of surface shape and small drops formed during large amplitude slosh with experimental imagery shows excellent agreement throughout the sloshing period. Comparison of temperature histories in the ullage, at the gas-liquid interface, and inside liquid with the experiment conducted at JAXA also show very good agreement. The simulation points to a stratified temperature field inside the liquid near the interface, critical to the ullage pressure after the collapse. The predicted pressure collapse matches well with the experimental value due to sloshing. Parametric sensitivity studies suggest that high-fidelity Loci/STREM-VOF simulations can play an essential role in predicting the actual thermodynamics of ullage collapse when following the recommended simulation methodology.

H Q Yang↗

NASA NTRSDate not supplied

Ryugu and the Quest for Unaltered CI-Like Materials From the Early Solar System

Samples of C-type asteroid (162173) Ryugu returned by the Hayabusa2 mission of JAXA [1-3] have been found to be mineralogically, chemically, and isotopically similar to CI carbonaceous chondrites [3-6]. The rare CI meteorites have bulk chemical compositions closely matching the solar photosphere in all but the most volatile elements, and so are considered to represent the starting composition of the solar system. Paradoxically, however, all known CI have been extensively altered by aqueous fluids (i.e., they are CI1), so that their primary mineralogy, textures, and oxygen isotope compositions have been obscured. Thus, one of the most exciting discoveries from Ryugu samples is that they contain “less-altered” (CI2) areas, which have substantial abundances of anhydrous silicates (olivine and pyroxene) and Ca-Al-rich phases that may be remnants of primordial CI3 materials [4-11]. This discovery has motivated new investigations of CIs that show higher abundances of anhydrous silicate grains than previously recognized [9,12,13]. Such studies are an important step in the search for unaltered CI-like material, a so-called “holy grail” of meteoriticists [14]. To further this goal, we are studying Ryugu samples in the context of a previously unrecognized, potentially Ryugu-like, population of C2 materials that occur as xenoliths in polymict ureilites.

C A Goodrich↗

NASA NTRS2023

Characterization of Oscillation Modes in Levitated Droplets Using Image and Non-Image Based Techniques

The dynamics of levitated liquid droplets can be used to measure their thermophysical properties by correlating the frequencies at which normal modes of oscillation most strongly resonate when subject to an external oscillatory force. In two preliminary works, it was shown via electrostatic levitation and processing of various metals and alloys that 1) the resonance of the first principal mode of oscillation (mode n = 2) can be used to accurately measure surface tension and 2) that so-called ‘higher-order resonance’ of n = 3 is observable at a predictable frequency. It was also shown, in the context of future space-based experimentation on the Electrostatic Levitation Furnace (ELF), a setup on the International Space Station (ISS) operated by Japan Aerospace Exploration Agency (JAXA), that while the shadow array method in which droplet behavior is visualized would be challenging to identify the n = 3 resonance, the normal mode n = 4 was predicted to be more easily identifiable. In this short communication, experimental evidence of the first three principal modes of oscillation is provided using molten samples of Tin and Indium and it is subsequently shown that, as predicted, an “image-less” approach can be used to identify both n = 2 and n = 4 resonances in levitated liquid droplets. This suggests that the shadow array method may be satisfactorily used to obtain a self-consistent benchmark of thermophysical properties by comparing results from two successive even-mode natural frequencies.

Nevin Brosius↗

NASA NTRSDate not supplied

Variability of Organic Matter Across Ci Chondrites and Ryugu

Petrologic and isotopic analysis of the mineral components of regolith samples from asteroid 162173 Ryugu collected by the JAXA Hayabusa2 spacecraft indicate a strong affinity with CI chondrite meteorites. Preliminary investigations of organic matter in Hayabusa2 samples also report similarities with insoluble organic matter in CI and CM chondrites. However, the Ryugu samples also contain a wide diversity of organic functional chemistry not previously observed in those aqueously altered chondrites. Due to their rarity, organic matter in CI chondrites is understudied relative to other chondrite classes. Here we investigate several CI samples with the same analytical approaches used for samples collected by Hayabusa2 for a more accurate comparison between CI and Ryugu organic matter.

Hayabusa2↗

NASA NTRSDate not supplied

The ESA Hera Mission: Detailed Investigation of the NASA Dart Impact Outcome and Characterization of the Binary Asteroid Didymos

The Hera mission is in development in the Space Safety Program of the European Space Agency (ESA) in collaboration with JAXA for launch in October 2024. It will rendezvous with the binary asteroid (65803) Didymos in early 2027 and over the following 6 months will investigate the properties of Didymos and its small moon Dirmorphos, including the effects of the successful impact of the NASA DART probe. DART was launched on 24 November 2021 at 06:21 UTC and successfully impacted at about 6.1 km/s on the 160 meter-size Dimorphos on 26 September 2022 at 23:14 UTC. Two weeks before impact, it deployed the Light Italian Cubesat for Imaging of Asteroids (LICIACube) that provided images during the few minutes following the impact. A campaign of observations from Earth and space provided distant images of the event, which were used to determine a reduction of 33 min in the orbital period of Dimorphos around Didymos. The Hera mission will investigate the outcome of the DART impact in detail. In particular, it will determine the effects of the impact on Dimorphos’ surface, e.g., whether it produced a crater, and if so its properties, and/or whether it led to global reshaping of Dimorphos. It will accurately measure the mass of Dimorphos, which will allow quantification of the momentum enhancement factor, which is a crucial parameter to evaluate the efficiency of the kinetic impactor technique. Hera will also determine in detail the physical, thermal and compositional properties of the asteroid, including first time measurements of the internal properties, which have a critical influence on the impact outcome. With Hera and DART together, we will have a fully documented deflection test and impact experiment that will allow us to verify our numerical impact models, to be able to extrapolate this deflection test to other asteroids and to improve our understanding of the complex geological properties and response of small asteroids. Hera consists of a mother spacecraft and two cubesats. It will perform the first rendezvous with a binary asteroid, arriving at Didymos about 4 years after DART. Hera will not only contribute significantly to the planetary defense effort by documenting entirely the outcome of the DART impact, it will also greatly advance our understanding of processes in the very low gravity regime of a small asteroidv (Dimorphos) as well as our knowledge of binary asteroids and asteroid geophysics. The mission development is progressing nominally, with the Critical Design Review having been passed in Nov. 2022. The various working groups of the Hera Science Team are working intensively to support this development and be best prepared for the surprises that Hera will offer during its visit to Didymos in 2027.

Asteroid deflection↗

NASA NTRS2022

Ice Sheet Melt Water Profile Mapping Using Multi-frequency Microwave Radiometry

For understanding englacial hydrology and its impact on ice sheet mass balance, observations of the liquid water content (LWC) within the ice sheets are needed. Earlier studies have shown the complementary nature of multi-frequency microwave radiometer measurements to detect subsurface LWC distribution in addition to surface LWC, which is critical for understanding the seasonal melt dynamics of ice sheets. In this study, we used 1.4 GHz brightness temperature (TB) measurements from the NASA Soil Moisture Active Passive (SMAP) satellite, and 6.9, 10.7, 18.9, and 36.5 GHz TB measurements from the JAXA Global Change Observation Mission-Water Shizuku (GCOM-W) satellite to investigate the multi-frequency response at pan-Greenland scale. The melt indications derived at different frequencies show trends consistent with persistent seasonal subsurface melt water and delayed subsurface refreezing of the seasonal melt water. The result suggests that the seasonal subsurface persistent melt water occurrences that are not captured by the high-frequency retrievals are both temporally and spatially very significant.

Burgin, Mariko↗

NASA NTRS2021

Future SAR Imaging Systems: Goals, Plans, Challenges and Opportunities

Synthetic Aperture Radar (SAR) Earth observation data are becoming increasingly ubiquitous as new spaceborne systems become operational and their data are made available to scientists and applications users. The characteristic of active sensors like SAR to be able to observe Earth independent of weather or solar illumination, coupled with regular data acquisition, fosters reliability and encourages the investment in algorithm and product development toward a beneficial result. As SAR systems typically contain proprietary or nationally important technologies, civilian SAR systems are typically developed with a national focus, or in the case of the European Union, with the Union’s focus. As a result, when viewed from a global perspective, SAR programs can be generally viewed as independent developments, each with their own requirements, schedules, development approaches, and data policies. At the same time, these systems can be expensive, and particularly in an era of increasingly open data policies, coordination of programs could reduce redundancy in observations, increase sampling density and measurement diversity, and improve dependability of data streams in the long term. Since 2018, agency representatives from NASA, ESA, DLR, JAXA, ISRO, ASI, and CONAE have been evaluating the possibilities for programmatic and technical coordination of future SAR systems, data sharing, and scientific exploitation. In this paper, we describe the work in discovering trends and possibilities associated with flight systems, by evaluating current and future plans for SAR systems around the world, and identifying opportunities for coordination.

Zink, Manfred↗

NASA NTRSDate not supplied

Gateway: Humanity’s Next Utilization Platform

The National Aeronautics and Space Administration’s (NASA) Gateway Program is an international collaboration to establish humanity’s first space station in lunar orbit. Gateway is a critical element of the Artemis missions that will create a sustained human presence on and around the Moon and chart a path for human missions to Mars. As a platform for science, Gateway builds on decades of success on the International Space Station by extending utilization capabilities from low-Earth orbit to deep space to leverage opportunities specific to the deep space lunar environment. NASA leads the Gateway Program and serves as the integrator of spaceflight capabilities and contributions of U.S. commercial and international partners, including the European Space Agency (ESA), Japanese Aerospace Exploration Agency (JAXA) and the Canadian Space Agency (CSA), to develop Gateway and leverage unique opportunities presented by its location in deep space. This paper provides: Gateway spacecraft overview, internal and external accommodations, resources for utilization, and vantage point for Earth, Sun, and Moon observations. Three utilization payloads have already been selected to fly on Gateway as part of the initial modules, the Habitation and Logistics Outpost (HALO) and Power and Propulsion Element (PPE): European Radiation Sensors Array (ERSA), Heliophysics Environmental and Radiation Measurement Experiment Suite (HERMES), and Internal Dosimeter Array (IDA). This paper will provide a short summary of each payload, the value behind conducting each payload, and share an overview of future utilization goals of Gateway.

Stephanie Buskirk Dudley↗

NASA NTRSDate not supplied

NASA’s Earth System Observatory Formulation Overview

NASA’s Earth System Observatory (ESO) is an array of Earth-focused, interconnected satellite missions focused on five core study areas: Surface Biology and Geology, Mass Change, Aerosols, Surface Deformation and Change, and Clouds, Convection, and Precipitation. Observatory development follows recommendations from the National Academies of Sciences, Engineering and Medicine’s 2017 Earth Science Decadal Survey. Data gathered by ESO missions will provide actionable science to inform decisions related to climate change, disaster mitigation, and wildfires, improve real-time agricultural processes, and many other applications. Targeting launch dates in the late 2020s and early 2030s, each ESO satellite will deliver valuable information, but by working together as a single observatory system, their combined data and imagery will provide the global community with a 4D, holistic view of Earth, from bedrock to atmosphere. The ESO is also building on the legacy of international collaboration in Earth science, with initial participation and collaboration on these missions across space agency partners, including the Japanese Aerospace Exploration Agency (JAXA), Centre National D'Etudes Spatiales (CNES), Canadian Space Agency (CSA), Deutsches Zentrum für Luft- und Raumfahrt (DLR), and Agenzia Spaziale Italiana (ASI). This paper provides an overview of ESO, as well as an update on ESO missions currently in formulation – the Atmosphere Observing System, Mass Change, and Surface Biology and Geology elements – including current mission architectures, international partner collaboration, science community engagement, and applications efforts, as well as how NASA and its partners will make ESO data accessible to users all over the world.

NASA Earth Science↗

NASA NTRS2023

Anisotropic Mach Cone Aligned Mesh Adaptation for Low Boom Simulations

An automated off-body Mach cone aligned structured curvilinear grid generation procedure is presented for near-field computational fluid dynamics simulations. This procedure combines output-based indicators and mesh redistribution to perform anisotropic mesh adaptation while maintaining Mach cone alignment. Automation is achieved through a novel direction-based adaptation indicator formulation. The adaptation procedure is demonstrated on the JAXA Wing Body geometry and X-59 C608 demonstrator model from the Second and Third AIAA Sonic Boom Prediction Workshops, respectively. It is demonstrated that anisotropic mesh adaptation may result in a greater than fifty percent reduction in resource usage required to achieve the same level of accuracy as uniform and user constructed Mach cone aligned grids for near-field pressure signatures, ground-level overpressure signatures, and loudness metrics.

CST↗

NASA NTRS2023

Anisotropic Mach Cone Aligned Mesh Adaptation for Low Boom Simulations

CST↗

NASA NTRS2023

NASA’s Atmosphere Observing System (AOS), From A Precipitation Perspective

NASA is developing the Atmosphere Observing System (AOS) mission as part of its Earth System Observatory (ESO) in response to priorities identified in the 2017 Earth Science Decadal Survey. AOS addresses the Decadal Survey’s call for missions measuring the targeted observables “clouds, convection, and precipitation”; “aerosol and cloud radiative properties”, and “aerosol vertical profiles”. AOS is currently in Phase A, the concept and technology development phase, with plans for satellite launches in the late 2020’s and early 2030’s, and suborbital measurements to include field campaigns after those satellite launches. Key precipitation-related instrumentation includes Doppler radars capable of measuring clouds and precipitation, and passive microwave radiometers with channels between 89-700 GHz. Other instrumentation includes dual-wavelength backscatter lidars, a multi-wavelength and multi-angle polarimeter, a far infrared imaging radiometer, and aerosol and moisture limb sounders that will contribute to studies of coupled aerosol-cloud-precipitation processes. From the perspective of precipitation science, a Ku-band Doppler radar in a 55° inclined orbit provided by JAXA will continue the heritage of precipitation radar measurements made by the Tropical Rainfall Measuring Mission (TRMM) and Global Precipitation Mission (GPM), while adding information about Doppler-derived particle vertical motions. With assumptions about particle terminal velocities, the Doppler measurements will enable estimates of the vertical air motion in storms. A higher frequency (W and/or Ka band) radar on a satellite in a polar sun-synchronous orbit will add similar information with greater sensitivity to clouds and to light precipitation. Passive microwave radiometers for AOS will be less capable than those from TRMM and GPM from a precipitation-measurement perspective, but more capable of adding information about cloud processes. Synergies among these and other instruments are expected to advance process-level understanding of aerosols, clouds, and precipitation.

Daniel J Cecil↗

NASA NTRSDate not supplied

Cr-Rich and Al-Rich Oxide Grains With 16O-Rich Compositions in Ryugu Samples

Samples returned from asteroid Ryugu by JAXA’s Hayabusa2 mission are CI-like, with abundant hydrated and secondary phases [1]. Rare anhydrous minerals occur in the matrix of the major lithology and in chemically distinct clasts. Oxygen isotopic analysis of coarse (> 10 µm) anhydrous Mg-rich silicates revealed a bimodal distribution, with some grains having compositions similar to amoeboid olivine aggregates (AOAs) and others having compositions similar to chondrule phenocrysts [2, 3]. We previously analyzed < 2 µm-sized Mg-rich silicates within a clast that also showed a range of O isotopic compositions (δ18O from -38 to +5 ‰) [4]. In this study, we conducted coordinated isotopic and mineralogical analysis of anhydrous oxide grains found in the matrix of Ryugu samples

A. N. Nguyen↗

NASA NTRS2023

Tensor-to-scalar ratio forecasts for extended LiteBIRD frequency configurations

LiteBIRD is a planned JAXA-led cosmic microwave background (CMB) B -mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, δr , down to δr < 0.001. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust spectral energy distribution, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compared the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the High-Frequency Telescope (HFT) frequency range was shifted logarithmically toward higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measured the tensor-to-scalar ratio r uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on r after foreground cleaning may be reduced by as much as 30–50% by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to higher residuals when fitting an incorrect dust model, but also it is easier to discriminate between models through higher χ 2 sensitivity. Even in the case in which the fitting procedure does not correspond to the underlying dust model in the sky, and when the highest frequency data cannot be modeled with sufficient fidelity and must be excluded from the analysis, the uncertainty on r increases by only about 5% for a 500 GHz configuration compared to the baseline.

U. Fuskeland↗