Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC DIPOLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

A COST-EFFECTIVE RAPID-CYCLING SYNCHROTRON

The present Fermilab proton Booster is an early example of a rapidly-cycling synchrotron (RCS). Build in 1960s, it features a design in which the combined-function dipole magnets serve as vacuum chambers. Such a design is quite cost-effective, and it does not have the limitations associated with the eddy currents in a metallic vacuum chamber. However, an important drawback of that design is a high impedance, as seen by a beam, because of the magnet laminations. More recent RCS designs (e.g. J-PARC) employ large and complex ceramic vacuum chambers in order to mitigate the eddycurrent effects and to shield the beam from the magnet laminations. Such a design, albeit very successful, is quite costly because it requires large-bore magnets and large-bore rf cavities. In this article, we will consider an RCS concept with a thin-wall metallic vacuum chamber as a compromise between the chamber-less Fermilab Booster design and the large-bore design with ceramic chambers.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Virtual Slit for Improved Resolution in Longitudinal Emittance Measurement

A technique to reduce point-spread originating from physical slit width in emittance measurements is described. This technique is developed to improve phase resolution in a longitudinal emittance apparatus consisting of a dipole magnet, energy-selecting slit and bunch shape monitor. In this apparatus, the energy and phase resolutions are directly proportional to the width of the slit, but the virtual slit method enables sub-slit resolution. The bunch phase profile is measured at two points in the energy distribution with a separation less than the physical slit width. The difference of these two profiles is used to reconstruct the profile from a virtual slit of width equal to the separation.

Ruisard, Kiersten↗
DOE OSTI2021

Optical devices enabled by vertical dielectric Mie resonators

Dielectric resonators provide a building block for the development of low-loss resonant metamaterials because they replace lossy ohmic currents of metallic resonators with low-loss displacement currents. The spectral locations of electric and magnetic dipole resonances of a dielectric resonator can be tuned by varying the resonator geometry so that desired scattering properties are achieved.

Campione, Salvatore↗
DOE OSTI2022

Results on photon-mediated dark matter-nucleus interactions from the PICO-60 C$_{3}$F$_{8}$ bubble chamber

Many compelling models predict dark matter coupling to the electromagnetic current through higher multipole interactions, while remaining electrically neutral. Different multipole couplings have been studied, among them anapole moment, electric and magnetic dipole moments, and millicharge. This study sets limits on the couplings for these photon-mediated interactions using non-relativistic contact operators in an effective field theory framework. Using data from the PICO-60 bubble chamber leading limits for dark matter masses between 2.7 GeV/c$^2$ and 24 GeV/c$^2$ are reported for the coupling of these photon-mediated dark matter-nucleus interactions. The detector was filled with 52 kg of C$_3$F$_8$ operating at thermodynamic thresholds of 2.45 keV and 3.29 keV, reaching exposures of 1404 kg-day and 1167 kg-day, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Photoconductive metasurface-based ultrafast device

A theoretically perfectly absorbing photoconductive all-dielectric metasurface is provided. This metasurface can improve the efficiency and performance of ultrafast photoconductive switches and detectors. In an embodiment, the metasurface is incorporated in photoconductive THz switches or detectors. In embodiments, the metasurface is constituted by a network of gallium arsenide resonators. Each resonator supports two degenerate and critically coupled magnetic dipole modes. Simultaneous excitation of these two modes leads to theoretically close-to-perfect optical absorption near the resonant wavelength.

Brener, Igal↗
DOE OSTI2024

LINAC Longitudinal Simulation and Measurement of Output Energy

The Linac at Fermilab, one of the oldest accelerators on-site, plays a crucial role in delivering 400 MeV proton beams to other accelerating facilities. The beam traveling through Linac needs to be carefully monitored for better accelerator operation. One of the key factors of efficient Linac operation is its longitudinal stability. The stability can minimize Linac loss and maximize beam current. For this purpose, I examined the beam's longitudinal profile, which is crucial for proper beam transfer between its two sections. After careful monitoring of the beam through Linac, we need to ensure that it leaves with desired parameters. The beam coming out from the Linac is subsequently injected into the Booster, a synchrotron that relies on dipole magnets to bend the beam at injection. If the output energy of the beam deviates from the expected value, the beam will bend at an incorrect radius, leading to potential beam loss. Therefore, precise regulation of the output energy is critical for the efficient operation of the accelerator. To address this, I have conducted a thorough examination of the Linac longitudinal simulations and data from Beam Position Monitors (BPMs). My objective is to measure and stabilize the output energy and verify its correspondence with the predicted simulation results. All these analyses are important for efficient operation of the accelerator.

Safaryan, Milena↗
DOE OSTI2023

An Initial Look at the Magnetic Design of a 150 mm Aperture High-Temperature Superconducting Magnet With a Dipole Field of 8 to 10 T

High-temperature superconducting REBa 2 Cu 3 O 7-$x$ (rebco) conductors have the potential to generate a high magnetic field over a broad temperature range. The corresponding accelerator magnet technology, still in its infancy, can be attractive for future energy-frontier particle colliders such as a multi-TeV muon collider. To help develop the technology, we explore the requirements and potential characteristics of a rebco magnet, operating at 4.2 or 20 K, with a dipole field of 8-10 T in a clear aperture of 150 mm. We use the canted cos $\theta$ magnet configuration to reduce the electromagnetic stresses on the conductors. We present the resulting dipole fields, field gradients for combined-function cases, conductor stresses, magnet dimensions and conductor lengths. We also discuss the conductor performance that is required to achieve the target dipole field at 4.2 and 20 K. In conclusion, the information can provide useful input to the development of rebco magnet and conductor technology for collider-ring magnets in a muon collider.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Study of Conduction-Cooled Superconducting Quadrupole Magnets Combined with Dipole Correctors for the ILC Main Linac

A superconducting rf (SRF) cryomodule for International Linear Collider(ILC) Main Linac equips focus/steering magnets. The magnets are "superferric" magnets with four superconducting (SC) race track coils conductively cooled from the cryomodule LHe supply pipe. The quadrupole field gradient and dipole field are 40 T/m and 0.1 T, respectively. The magnet length and iron-pole radius are 1 m and 0.045 m, respectively. It is known that dark current is generated at SRF cavities and accelerated through the following linac string. The dark current reaches and heats the SC magnets. It is estimated that the power deposition in the magnet may reach more than a few watts and temperature of the SC coils may locally reach to critical temperature of NbTi. It is important to make the magnet not reach quench with sufficient conduction cooling. We aim to realize the SC magnet which can stably operate under such condition. We plan to develop test coils made of three types of SC materials, NbTi, Nb₃Sn, and MgB₂ and study thermal characteristics and stability . We will develop a short model magnet, based on the test coil results. Here, we will present the magnet design study and the R&D plan.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

Quantum Spin Ice Dynamics in the Dipole-Octupole Pyrochlore Magnet Ce 2 Zr 2 O 7

Neutron scattering measurements on the pyrochlore magnet Ce 2 Zr 2 O 7 reveal an unusual crystal field splitting of its lowest J = 5 / 2 multiplet, such that its ground-state doublet is composed of m J = ± 3 / 2 , giving these doublets a dipole-octupole (DO) character with local Ising anisotropy. Its magnetic susceptibility shows weak antiferromagnetic correlations with θ CW = - 0.4 ( 2 ) K , leading to a naive expectation of an all-in, all-out ordered state at low temperatures. Instead, our low-energy inelastic neutron scattering measurements show a dynamic quantum spin ice state, with suppressed scattering near | Q | = 0 , and no long-range order at low temperatures. We find that this is consistent with recent theory predicting symmetry-enriched U(1) quantum spin liquids for such DO doublets decorating the pyrochlore lattice. Finally, we show that disorder, especially oxidation of powder samples, is important in Ce 2 Zr 2 O 7 and could play an important role in the low-temperature behavior of this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Nonvolatile Magnetoelectric Switching of Magnetic Tunnel Junctions with Dipole Interaction

The magnetoelectric effect is technologically appealing because of its ability to manipulate magnetism using an electric field rather than magnetic field or current, thus providing a promising solution for the development of energy-efficient spintronics. Although 180° magnetization switching is vital to spintronic devices, the achievement of 180° magnetization switching via magnetoelectric coupling is still a fundamental challenge. Here, in this work, voltage-driven full resistance switching of a magnetic tunnel junction (MTJ) with dipole interaction on a ferroelectric substrate through switchable parallel/antiparallel magnetization alignment is demonstrated. Parallel magnetization alignment along the y direction is obtained under a bias magnetic field. By rotating the magnetic easy axis via strain-mediated magnetoelectric coupling, the parallel magnetizations in the MTJ reorient to the x axis with opposite paths because of dipole interaction, thus resulting in antiparallel alignment. Moreover, this voltage switching of MTJs is nonvolatile owing to variations in dipole interaction and can be well understood via phase field simulations. The results provide an avenue to realize electrical switching of MTJs and are significant for exploring energy-efficient spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

What is needed for BISCO to work in a dipole insert for 20 tesla hybrid accelerator magnets

Developing HTS dipole inserts producing fields larger than 5 T within 15 T Nb3Sn outserts is necessary to generate 20 T or higher fields for future high energy colliders. Dipole inserts based on the cos-theta coil geometry with various stress management concepts and Bi2212 super-conducting strand and cable are being developed at Fermilab both within and beyond the U.S. national effort. On paper, the potential reach for the maximum magnetic field in existing or planned Nb3Sn outserts is close to 20 T, thanks to the progress realized in Bi2212 wires’ critical current density. To achieve the Bi2212 potential in accelerator magnets, however, a number of technological challenges still have to be faced. These for instance include the need to design billets that are adequate for Rutherford cabling; developing insulation processes and materials that prevent leaks, which reduce transport current and increase the risk of shorts; control and limit Bi2212 coils’ stresses and strains; reconsider the Split Melt Process (SMP) to lower costs and simplify the processing. This paper reviews Bi2212 conductor properties and coil technolo-gies, and proposes new ideas to face the challenges that Bi2212 still presents as an accelerator magnet conductor.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

Fabrication of Bi-2212 Canted-Cosine-Theta Dipole Prototypes

The U.S. Magnet Development Program (MDP) is exploring the possibility of combining low-and higherature superconductor technologies, using cosine-theta and canted-cosine-theta (CCT) Nb3Sn dipole magnets together with Bi-2212 CCT inserts, with the ultimate goal of constructing a 20-T dipole. The MDP short-term goal is a Bi-2212 CCT insert capable of reaching 5 T in the bore when operating as a stand-alone and 3 T when operating under a background field of 15 T. This paper reports on the fabrication of our BIN4 dipole magnet and our BIN5a and BIN5b coils, designed and built at the Lawrence Berkeley National Laboratory to address potential fabrication issues of Bi-2212 coils and verify the design of our 18-20-T dipole magnet. BIN4 is a two-layer 50-cm-long CCT magnet that uses a nine-strand Rutherford cable made with 0.8-mm-diameter Bi-2212 strands. Its goal is to investigate critical current, insulation integrity, manufacturing challenges, and quench protection issues after heat treating both layers together under oxygen at standard atmosphere (1 bar). BIN5a and BIN5b are two identical coils, similar to the outer layer of BIN4, with the difference that the length is 39 cm, and they will undergo 50-bar overpressure processing heat treatment. Finally, BIN5 coils are made from the state-of-the-art strand with an engineering critical current density of 1150 A/mm 2 at 4.2 K and 5 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Designs and Prospects of Bi-2212 Canted-Cosine-Theta Magnets to Increase the Magnetic Field of Accelerator Dipoles Beyond 15 T

The critical current density of Bi-2212 round wires has seen significant improvement over the past two years. We present the magnetic design and stress analysis of two Bi-2212 dipoles based on Canted-Cosine-Theta (CCT) technology using the state-of-the-art wires. The first design, based on a 19-strand Rutherford cable of θ0.8mm strands, is a two-layer dipole with a bore diameter of 40 mm and an outer diameter of 98.4 mm; it generates 5.4 T when operating in stand-alone configuration and 18.9 T in 15 T background field. The second design, based on a 13-strand Rutherford cable of θ0.8mm strands, is also a two-layer dipole with a bore diameter of 40 mm and an outer diameter of 81 mm; it generates 4.0 T when operating in stand-alone configuration and 17.8 T in 15 T background field. Normal stresses on the conductor in these magnets do not exceed 35 MPa when working under background field.Moreover, we propose a novel approach for increasing the efficiency of CCT magnets using keystoned Rutherford cable while removing the midplane ribs. with this method, it is possible to increase the efficiency of small radius CCT coils by 20%. We conclude that Bi-2212 can be used to increase the limit of accelerator magnet dipole fields beyond 15 T while managing stresses in the coils to acceptable levels.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Test Results of Fast Decaying Current-Induced AC Losses in SHMS Superconducting Magnets at Jefferson Lab

The 11 GeV Super High Momentum Spectrometer (SHMS) of Hall C, part of the recent 12 GeV accelerator Upgrade at Jefferson Lab, was successfully commissioned in 2017. Fast current discharges of the SHMS Q2, Q3 quadrupoles and dipole superconducting magnets experienced some level of operational difficulty, during commissioning and normal operation. Measurements and analyses demonstrate that the fast current discharge leads to substantial AC losses in the conductor and subsequently triggers a quench-back effect. The details of the measurements and analyses have been reported previously. This paper focuses on the test results of the magnets using a reduced value of the protection dump resistor for each magnet to lower the current decay rate. Finally, the test results confirmed that the reduced dump resistances eliminated the quench-back effect for the SHMS Q2, Q3 and Dipole magnets, thus improving their cryogenic operability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Dark moments for the Standard Model?

If dark matter (DM) interacts with the Standard Model (SM) via the kinetic mixing (KM) portal, it necessitates the existence of portal matter (PM) particles which carry both dark and SM quantum numbers that will appear in vacuum polarization-like loop graphs. In addition to the familiar ~ eϵQ strength, QED-like interaction for the dark photon (DP), in some setups different loop graphs of these PM states can also induce other coupling structures for the SM fermions that may come to dominate in at least some regions of parameter space regions and which can take the form of ‘dark’ moments, e.g., magnetic dipole-type interactions in the IR, associated with a large mass scale, Λ. In this paper, motivated by a simple toy model, we perform a phenomenological investigation of a possible loop-induced dark magnetic dipole moment for SM fermions, in particular, for the electron. We show that at the phenomenological level such a scenario can not only be made compatible with existing experimental constraints for a significant range of correlated values for Λ and the dark U(1) D gauge coupling, g D , but can also lead to quantitatively different signatures once the DP is discovered. In this setup, assuming complex scalar DM to satisfy CMB constraints, parameter space regions where the DP decays invisibly are found to be somewhat preferred if PM mass limits from direct searches at the LHC and our toy model setup are all taken seriously. High precision searches for, or measurements of, the e + e - → γ + DP process at Belle II are shown to provide some of the strongest future constraints on this scenario.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Electron Spin Resonance Study of Zn{sub x}Co{sub 1−x}Fe{sub 2−x}Al{sub x}O{sub 4} Nanoparticles

Zn- and Al-substituted cobalt ferrite Zn{sub x}Co{sub 1−x}Fe{sub 2−x}Al{sub x}O{sub 4} (0 ≤x≤ 0.9) with particle size in the range of 6–13 nm were synthesized by glycol-thermal reaction. The compounds were investigated by electron spin resonance (ESR) measurements. CoFe{sub 2}O{sub 4} (x = 0) shows a broad ESR signal associated with magnetic dipole-dipole interactions among particles which is highly sensitive to the Zn and Al ion concentrations. Narrower ESR signals in Zn- and Al-doped samples are attributed to the weakening of super-exchange interactions. ESR and magnetization measurements reveal a reduction in magnetization with increasing particle size. This is explained on the basis of the redistribution of Zn{sup 2+} ions in both tetrahedral (A) and octahedral (B) sites in fine powders.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Effect of atom substitutions on the magnetic properties in Ce 2 Fe 17 : Toward permanent magnet applications

Due to the rapidly developing technologies and huge market demand, there has been increasing interest internationally in exploring permanent magnet formulations in addition to the well-known Nd 2 Fe 14 B and SmCo 5 /Sm 2 Co 17 . Given Fe's low materials cost and generally high magnetization, Fe-rich rare earth binaries such as Ce 2 Fe 17 comprise a rich “hunting ground” for such new materials. While this compound suffers from a low ordering point and is a heli magnet, these difficulties are easily remedied by the substitution of appropriate amounts of cobalt for Fe, with room-temperature saturation magnetization as high as 1.5 T. In this work, we try to switch the all-important magnetic anisotropy from planar to uniaxial behavior in Ce 2 Fe 17 via 18 h - and 6 c -type atom substitutions with Si, Ir, and numerous other atoms. The uniaxial magnetocrystalline anisotropy is successfully achieved in the 6 c -site-substituted Ce 2 Fe 15 Ir 2 systems, along with large magnetization. We find that iridium substitution, in particular, induces a substantial uniaxial anisotropy of 11.25 MJ/m 3 , which is comparable to most of the current rare earth permanent magnets. Although the iridium substitution is costly, the finding of Ir-triggered uniaxial magnetic anisotropy indicates the potential of Ce–Fe-based alloys for permanent magnets.

36 MATERIALS SCIENCE↗