Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Hollow target magnetron-sputter-type solid material ion source

A thin-walled aluminum (Al) hollow electrode has been inserted into an ion source to serve as an electrode for a radio frequency magnetron discharge. The produced plasma stabilized by argon (Ar) gas sputters the Al electrode to form a beam of Al{sup +} and Ar{sup +} ions. The total beam current extracted through a 3 mm diameter extraction hole has been 50 {mu}A, with the Al{sup +} ion beam occupying 30% of the total beam current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and Magnetic Properties of Graded (001)-Oriented FePt Films Prepared by Magnetron Sputtering and Rapid Thermal Annealing

L1{sub 0}-FePt/[Fe/Pt]{sub 27} multilayer films were prepared on (100)-oriented single-crystal MgO substrates. Structural analysis indicates epitaxial growth of the L1{sub 0}-FePt films during high-temperature deposition. The room-temperature-deposited [Fe/Pt]{sub 27} multilayer exhibits the fcc-FePt structure grown epitaxially on the L1{sub 0}-FePt base layer. The degree of chemical order and thereby the anisotropy of the top layer has been controlled by varying the temperature of a post-deposition annealing process. Compared with the as-deposited films, coercivities of the films annealed below 400 {sup ∘}C are substantially decreased by introducing the formation of a graded anisotropy in the partially ordered top layer. Coercivities decrease for annealing temperatures that are greater than 400 {sup ∘}C due to improved ordering of the top layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of oxygen on characteristics of Zn(O,S) thin films deposited by RF magnetron sputtering

Zn(O,S) thin films were successfully deposited by reactive sputtering using Ar and O{sub 2} gas mixtures at 473 K. X-ray diffraction patterns revealed that the well crystallized Zn(O,S) films were deposited with increasing oxygen concentration in O{sub 2}/Ar, resulting in a shift of the Zn peak of 28.5° to a higher angle, closer to the ZnO peak of 34.4°. Zn(O,S) films were composed of grains agglomerated from small particles, which grew gradually with increasing oxygen concentration. The depth profiles and energy dispersive spectroscopy results of the films indicated that the O/(O+S) ratio increased from 0.04 to 0.81, and all Zn(O,S) films were Zn rich with uniform concentrations of each component. X-ray photoelectron spectroscopy revealed that, as the oxygen concentration increased to 2%, the ZnS films were transformed to Zn(O,S) films via substitution of oxygen for sulfur.

36 MATERIALS SCIENCE↗

Effects of deposition parameters on tantalum films deposited by direct current magnetron sputtering

The structure, composition, and temperature coefficient of resistance of tantalum films were studied as a function of deposition parameters and substrate temperature. As the sputtering power increases from 25 to 100 W, tantalum films deposited at 300 deg. C consisting of the {beta} phase, the preferred-growth orientation changes from (200) to (202) and the temperature coefficient of resistance reduces from -289.79 to -116.65 ppm/ deg. C. The decrease in oxygen and other impurity content in the films was observed when the deposition power was increased. The O/Ta ratio decrease and grain size reduction, which were related to a change in electrical resistivity, were also observed as substrate temperature was varied from 300 to 500 deg. C. These results indicated that the electrical properties were related to the oxygen and other impurity content and grain size in the films rather than to growth orientation. At 650 deg. C, the metastable {beta}-Ta phase was partially transformed into the stable {alpha}-Ta phase which leads to a sharp decrease in the electrical resistivity and a significant change in the microstructure of the tantalum films.

36 MATERIALS SCIENCE↗

Properties of ZnSe/Al{sub 2}O{sub 3} Nanostructures Obtained by RF Magnetron Sputtering

Experimental data for the synthesis of ZnSe/Al{sub 2}O{sub 3} nanostructures utilizing a technology widely used in integrated circuit (IC) production are reported. It has been shown that the refractive index and size of the coherent scattering domains grow, whereas the energy bandgap decreases, with an increase in ZnSe width. It has been supposed that samples with a ZnSe width of 9 Å contain a ZnSeO{sub 3} compound and/or ZnSe ⋅ Al{sub 2}O{sub 3} complex compound. Multilayer heterostructures with a ZnSe width more than 9 Å contain cubic ZnSe nanocrystallites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The effect of pretreatment by titanium ion beam on the internal stresses and microstructure of the TiAlN coating obtained by magnetron sputtering

The increase in duration of titanum ion pretreatment of the substrate-austenitic steel leads to a decrease in the transverse dimensions of the nanocrystalline columnar coating Ti{sub 1−x}AlxN structure, emergence of ferritic layer between coating and substrate and an increase in the compressive macrostresses both in the coating and in the substrate.

36 MATERIALS SCIENCE↗

High rate reactive magnetron sputter deposition of Al-doped ZnO with unipolar pulsing and impedance control system

Al-doped ZnO (AZO) films were deposited on quartz glass substrates, unheated and heated to 200 deg. C, using reactive sputtering with a special feedback system of discharge impedance combined with midfrequency pulsing. A planar Zn-Al alloy target was connected to the switching unit, which was operated in a unipolar pulse mode. The oxidation of the target surface was precisely controlled by a feedback system for the entire O{sub 2} flow ratio including ''the transition region''. The deposition rate was about 10-20 times higher than that for films deposited by conventional sputtering using an oxide target. A deposition rate of AZO films of 390 nm/min with a resistivity of 3.8x10{sup -4} {Omega} cm and a transmittance in the visible region of 85% was obtained when the films were deposited on glass substrates heated to 200 deg. C with a discharge power of 4 kW.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Boron-rich plasma by high power impulse magnetron sputtering of lanthanum hexaboride

Boron-rich plasmas have been obtained using a LaB{sub 6} target in a high power impulse sputtering (HiPIMS) system. The presence of {sup 10}B{sup +}, {sup 11}B{sup +}, Ar{sup 2+}, Ar{sup +}, La{sup 2+}, and La{sup +} and traces of La{sup 3+}, {sup 12}C{sup +}, {sup 14}N{sup +}, and {sup 16}O{sup +} have been detected using an integrated mass and energy spectrometer. Peak currents as low as 20 A were sufficient to obtain plasma dominated by {sup 11}B{sup +} from a 5 cm planar magnetron. The ion energy distribution function for boron exhibits an energetic tail extending over several 10 eV, while argon shows a pronounced peak at low energy (some eV). This is in agreement with models that consider sputtering (B, La) and gas supply (from background and 'recycling'). Strong voltage oscillations develop at high current, greatly affecting power dissipation and plasma properties.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Hollow metal target magnetron sputter type radio frequency ion source

A 70 mm diameter 70 mm long compact ion source equipped with a hollow sputtering target has been designed and tested. The hollow sputtering target serves as the radio frequency (RF) plasma excitation electrode at 13.56 MHz. A stable beam of Cu{sup +} has been extracted when Ar was used as the discharge support gas. In the extracted beam, Cu{sup +} had occupied more than 85% of the total ion current. Further increase in Cu{sup +} ions in the beam is anticipated by increasing the RF power and Ar pressure.

36 MATERIALS SCIENCE↗

Observation of a periodic runaway in the reactive Ar/O{sub 2} high power impulse magnetron sputtering discharge

This paper reports the observation of a periodic runaway of plasma to a higher density for the reactive discharge of the target material (Ti) with moderate sputter yield. Variable emission of secondary electrons, for the alternating transition of the target from metal mode to oxide mode, is understood to be the main reason for the runaway occurring periodically. Increasing the pulsing frequency can bring the target back to a metal (or suboxide) mode, and eliminate the periodic transition of the target. Therefore, a pulsing frequency interval is defined for the reactive Ar/O{sub 2} discharge in order to sustain the plasma in a runaway-free mode without exceeding the maximum power that the magnetron can tolerate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Process-structure-property correlations in pulsed dc reactive magnetron sputtered vanadium oxide thin films

Cathode hysteresis in the reactive pulsed dc sputtering of a vanadium metal target was investigated to correlate the structural and electrical properties of the resultant vanadium oxide thin films within the framework of Berg's model [Berg et al., J. Vac. Sci. Technol. A 5, 202 (1987)]. The process hysteresis during reactive pulsed dc sputtering of a vanadium metal target was monitored by measuring the cathode (target) current under different total gas flow rates and oxygen-to-argon ratios for a power density of {approx}6.6.W/cm{sup 2}. Approximately 20%-25% hysteretic change in the cathode current was noticed between the metallic and oxidized states of the V-metal target. The extent of the hysteresis varied with changes in the mass flow of oxygen as predicted by Berg's model. The corresponding microstructure of the films changed from columnar to equiaxed grain structure with increased oxygen flow rates. Micro-Raman spectroscopy indicates subtle changes in the film structure as a function of processing conditions. The resistivity, temperature coefficient of resistance, and charge transport mechanism, obeying the Meyer-Neldel relation [Meyer and Neldel, Z. Tech. Phys. (Leipzig) 12, 588 (1937)], were correlated with the cathode current hysteric behavior.

36 MATERIALS SCIENCE↗

An in situ x-ray photoelectron spectroscopy study of the initial stages of rf magnetron sputter deposition of indium tin oxide on p-type Si substrate

The interface between indium tin oxide and p-type silicon is studied by in situ X-ray photoelectron spectroscopy (XPS). This is done by performing XPS without breaking vacuum after deposition of ultrathin layers in sequences. Elemental tin and indium are shown to be present at the interface, both after 2 and 10 s of deposition. In addition, the silicon oxide layer at the interface is shown to be composed of mainly silicon suboxides rather than silicon dioxide.

36 MATERIALS SCIENCE↗

Spark Plasma Sintering of SmS-Based Ceramic Targets for the Magnetron Sputtering

The results of studying the electric-spark plasma sintering of samarium monosulfide ceramics are presented. The dependence of the microstructure and phase composition of ceramics on the temperature of spark plasma sintering is studied on the basis of the data of scanning electron microscopy, energy dispersion X-ray microanalysis, and powder X-ray diffraction of synthesized samples. It is shown that a dense, nonporous ceramics, the phase composition of which is close to the composition of the initial powder, is formed at a sintering temperature of 1200°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studies on Nd{sub x}In{sub 1−x}O{sub 3} semiconducting thin films prepared by rf magnetron sputtering

Neodymium-substituted indium oxide (Nd{sub x}In{sub 1−x}O{sub 3}, NIO) semiconducting thin films fabricated by rf sputtering were investigated. It was found that the incorporation of Nd atoms would lead to broadening the optical band gap, suppressing the grain growth, and reducing the free carrier concentration. The field-effect transistors with different NIO (5%, 15%, and 25% Nd concentration of the targets) channel layers exhibited similar electrical stability under positive gate-bias-stress, but the ones with 15% and 25% Nd concentration displayed much better stability under negative gate-bias-stress. Detailed studies showed that the content of |Nd3d{sub 5/2}{sup 5}4f{sup 4}O2p{sup −1}> electron configuration decreased as the Nd concentration increased, resulting in the reduction of holes during negative-bias-stress. And the reduction of the |Nd3d{sub 5/2}{sup 5}4f{sup 4}O2p{sup −1}> content as the Nd concentration increased was ascribed to less overlap between the metal and ligand orbitals arose from large lattice expansion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure and chemical wet etching characteristics of AlN films deposited by ac reactive magnetron sputtering

The influence of the surface morphology of a molybdenum underlayer on the crystallinity and etchability of reactively sputtered c-axis oriented aluminum nitride thin films was investigated. Atomic force microscopy, scanning electron microscopy, transmission electron microscopy, high resolution x-ray diffraction, and defect selective chemical etching were used to characterize the microstructure of the Mo and AlN films. 1000 nm thick films of AlN with a full width at half maximum (FWHM) of the x-ray rocking curve ranging from 1.1 deg. to 1.9 deg. were deposited on 300 nm thick Mo underlayers with a FWHM of around 1.5 deg. The Ar pressure during the Mo deposition had a critical effect on the Mo film surface morphology, affecting the structure of the subsequently deposited AlN films and, hence, their wet etching characteristics. AlN films deposited on Mo sputtered at a relatively high pressure could not be etched completely, while AlN films deposited on low pressure Mo etched more easily. Postdeposition etching of the Mo surface in Ar rf discharge prior to deposition of the AlN film was found to influence the formation of AlN residuals that were difficult to etch. Optimal rf plasma etching conditions were found, which minimized the formation of these residuals.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Correlation of structure and hardness of rf magnetron sputtered silicon carbonitride films

Ternary nanocomposite silicon carbonitride (Si-C-N) ceramic coatings have shown potential for wear resistance, oxidation resistance, hardness, tunable band gap, and chemical inertness applications. A systematic investigation on the deposition of Si-C-N nanocomposite coatings by sputtering under varying deposition conditions such as chamber pressure, substrate temperature by structural, nanoindentation, and microstructural studies of optimized condition has been presented. Significant role of different deposition parameter on the mechanical and structural properties were observed. The structural characterizations of the coatings were carried out using Fourier transformed infra red (FTIR), transmission electron microscopy, Raman spectroscopy, and field emission scanning electron microscope. An increase in argon-nitrogen pressure in the range of 1-5 Pa led to lowering of particle size and surface smoothening and growth of hard phases of {beta}-C{sub 3}N{sub 4} and {beta}-Si{sub 3}N{sub 4}. An increase in substrate temperature from room temperature to 500 deg. C led to nucleation and growth of hard phases of {beta}-C{sub 3}N{sub 4} and Si{sub 3}N{sub 4} in the amorphous Si-C-N matrix. The nanoindentation studies showed the variation in hardness and Young's modulus from 8 to 22 GPa and from 100 to 240 GPa, respectively, dependent on the deposition conditions. The FTIR studies confirmed the presence of C-N, Si-N, Si-Si, Si-O, and Si-C in different films.

36 MATERIALS SCIENCE↗

Electronic and optical properties of ScN and (Sc,Mn)N thin films deposited by reactive DC-magnetron sputtering

Scandium nitride (ScN) is a rocksalt semiconductor that has attracted significant attention from various researchers for a diverse range of applications. Motivated by the prospect of using its interesting electronic structure for optoelectronic and dilute magnetic semiconductor applications, we present detailed studies of the electronic transport and optical properties of ScN and its alloys with manganese nitride (MnN). Our results suggest (a) dilute manganese doping in ScN compensates for the high n-type carrier concentrations arising due to oxygen impurities and (b) an n-type to p-type carrier type transition occurs at a composition between 5.8% and 11% Mn on Sc sites. In terms of its optical properties, our analysis clearly indicates direct and indirect bandgap absorption edges of ScN located at 2.04 eV and 1.18 eV, respectively. In addition to the direct gap absorption edge, (Sc,Mn)N samples also show Mn-defect induced electronic absorption. Photoluminescence measurements at room temperature from ScN films exhibit a yellowish-green emission corresponding to direct gap radiative recombination. Direct gap recombination is not expected given the smaller indirect gap. A possible role of high excitation intensities in suppressing relaxation and recombination across the indirect bandgap is suspected. Raman spectroscopic and ellipsometric characterization of the dielectric permittivities of ScN and (Sc,Mn)N are also presented to assist in understanding the potential of ScN for optoelectronic applications.

36 MATERIALS SCIENCE↗