Search NASA⌕ Search

SEARCH · Search NASA

Results for “METALS - TEMPERATURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Sealed aerospace metal-hydride batteries

Nickel metal hydride and silver metal hydride batteries are being developed for aerospace applications. There is a growing market for smaller, lower cost satellites which require higher energy density power sources than aerospace nickel-cadmium at a lower cost than space nickel-hydrogen. These include small LEO satellites, tactical military satellites and satellite constellation programs such as Iridium and Brilliant Pebbles. Small satellites typically do not have the spacecraft volume or the budget required for nickel-hydrogen batteries. NiCd's do not have adequate energy density as well as other problems such as overcharge capability and memory effort. Metal hydride batteries provide the ideal solution for these applications. Metal hydride batteries offer a number of advantages over other aerospace battery systems.

Coates, Dwaine↗
NASA NTRS1992

Ellipsometric study of oxide films formed on LDEF metal samples

The optical constants of samples of six different metals (Al, Cu, Ni, Ta, W, and Zr) exposed to space on the Long Duration Exposure Facility (LDEF) were studied by variable angle spectroscopic ellipsometry. Measurements were also carried out on portions of each sample which were shielded from direct exposure by a metal bar. A least-squares fit of the data using an effective medium approximation was then carried out, with thickness and composition of surface films formed on the metal substrates as variable parameters. The analysis revealed that exposed portions of the Cu, Ni, Ta, and Zr samples are covered with porous oxide films ranging in thickness from 500 to 1000 A. The 410 A thick film of Al2O3 on the exposed Al sample is practically free of voids. Except for Cu, the shielded portions of these metals are covered by thin non-porous oxide films characteristic of exposure to air. The shielded part of the Cu sample has a much thicker porous coating of Cu2O. The tungsten data could not be analyzed.

Franzen, W.↗
NASA NTRS1991

Metal oxide absorbents for regenerative carbon dioxide and water vapor removal for advanced portable life support systems

Recent studies of Allied Signal metal oxide based absorbents demonstrated that these absorbents offer a unique capability to regeneratively remove both metabolic carbon dioxide and water vapor from breathing air; previously, metal oxides were considered only for the removal of CO2. The concurrent removal of CO2 and H2O vapor can simplify the astronaut Portable Life Support System (PLSS) by combining the CO2 and humidity control functions into one regenerative component. The use of metal oxide absorbents for removal of both CO2 ad H2O vapor in the PLSS is the focus of an ongoing program. The full scale Metal Oxide Carbon dioxide and Humidity Remover (MOCHR) and regeneration unit is described.

Hart, Joan M.↗
NASA NTRS1992

Noble metal abundances in an early Archean impact deposit

Detailed analyses are reported on the concentrations of the noble metals Pd, Os, Ir, Pt, and Au in an early Archean spherule bed (S4) of probably impact origin from the lower Fig Tree Group, Barberton Greenstone Belt, South Africa. Compared to other sedimentary deposits of known or suspected impact origin, some noble metals are present in exceptionally high concentrations. Noble metal abundances are fractionated relative to abundances in chondrites with ratios of Os/Ir, Pt/Ir, Pd/Ir, and Au/Ir at only 80, 80, 41, and 2 percent of these values on CI chondrites. Although an extraterrestrial source is favored for the noble metal enrichment, the most plausible cause of the fractionation is by regional hydrothermal/metasomatic alteration.

Kyte, Frank T.↗
NASA NTRS1992

Origin of metallic Fe-Ni in Renazzo and related chondrites

To assess the formation of metallic Fe-Ni in Renazzo and related chondrites, Ni and Co zoning profiles in metallic Fe-Ni are determined from different petrographic sites (chondrule interiors, chondrule margins, chondrule rims, and matrix) in Renazzo, Al Rais, and the related chondrite, MacAlpine Hills 87320. Metal from chondrule interiors shows flat Ni and Co concentrations and profiles, moderately large grain-to-grain compositional variations (even with chondrules), and generally high Ni and Co. Nickel concentrations extend above the kamacite stability limit; etching such 'martensite' shows high-Ni domains in some cases, but observed Ni concentrations do not exceed 190 mg/g. Metal from chondrule margins adjacent to matrix shows convex Ni and Co zoning profiles; the highest Ni and Co concentrations are at grain centers, although the mean central Ni and Co concentrations in margin grains are much lower than those from chondrule interiors; the remainder are convex. The low Co and Ni contents at the edge of grains in chondrule margins are interpreted to reflect dilution by Fe produced by FeO reduction.

Lee, Min S.↗
NASA NTRS1992

Combustion synthesis of ceramic-metal composite materials - The TiC-Al2O3-Al system

Combustion synthesis was applied for producing ceramic-metal composites with reduced levels of porosity, by allowing an excess amount of liquid metal, generated by the exothermic reaction during synthesis, to infiltrate the pores. It is shown that this method, when applied to TiC-Al2O3 system, led to a decreased level of porosity in the resulting TiC-Al2O3-Al product, as compared with that of TiC-Al2O3 system. This in situ procedure is more efficient than the two-stage conventional processes (i.e., sintering followed by liquid metal infiltration), although there are limitations with respect to total penetration of the liquid metal and maintaining a stable propagation of the combustion reaction.

Feng, H. J.↗
NASA NTRS1992

CN anomalies in extremely metal-deficient red giants

New photometric and UV spectroscopic data for the metal-deficient red giants CD -38 deg 245 and BD -18 deg 5550 are presented and discussed in light of recently noted photometric anomalies. From the IUE spectra it is aparent that the UV excess found in BD -18 deg 5550 is not the result of a hot companion. The IUE spectra, in conjunction with other observations, point to anomalous nitrogen abundances as the source of the discrepancies between the photometric and spectroscopic abundances for these stars. CD -38 deg 245 appears to be exceptionally nitrogen-rich while BD -18 deg 5550 is anomalously nitrogen-poor with respect to stars of comparable metallicities. While BD -18 deg 5550 appears to be an exception to the rule for its metallicity, the confirmation of a similar photometric pattern for CS 22885-96 may be an indication that the nitrogen overabundance in CD -38 deg 245 is typical for giants of extreme metal-deficiency.

Anthony-Twarog, Barbara J.↗
NASA NTRS1993

High-dispersion spectroscopy of giants in metal-poor globular clusters. I - Iron abundances

High-resolution, high-SNR CCD spectra have been obtained for 16 giants in eight metal-poor Galactic globular clusters. Fe abundances accurate to 0.15 dex have been determined by a fully consistent set of model atmospheres and spectrum synthesis techniques. A metallicity scale is presented for metal-poor clusters that should prove useful for calibrating a wide variety of photometric and low-resolution spectroscopic metallicity indicators.

Minniti, Dante↗
NASA NTRS1993

Solar noble gases revealed by closed system stepped etching of a metal separate from Fayetteville

Solar He, Ne, and Ar in a Fe-Ni separate from the chondrite Fayetteville are analyzed by closed system stepped oxidation. We report here data of the first 15 steps comprising 55 percent of the total solar gases. He-4/Ar-36 and Ne-20/Ar-36 are quite constant at values about 20 percent below those of present day solar wind (SWC). In this, Fe-Ni differs from lunar ilmenites where He-4/Ar-36 and Ne-20/Ar-36 in the first steps are several times below SWC. Thus, metal retains SW-noble gases even better than ilmenite, almost without element fractionation. Nevertheless, the isotopic composition of SW-He, -Ne, and -Ar in the first steps of the metal sample are identical to those found in a recently irradiated lunar ilmenite, indicating that ilmenites and chondritic metal both contain isotopically unfractionated SW noble gases. A preliminary analysis of a smaller Fayetteville metal separate shows Ne from solar energetic particles (SEP-Ne) with Ne-20/Ne-22 less than or equal to 11.5.

Murer, CH.↗
NASA NTRS1993

Microactuator production via high aspect ratio, high edge acuity metal fabrication technology

LIGA is a procession sequence which uses x-ray lithography on photoresist layers of several hundred micrometers to produce very high edge acuity photopolymer molds. These plastic molds can be converted to metal molds via electroplating of many different metals and alloys. The end results are high edge acuity metal parts with large structural heights. The LIGA process as originally described by W. Ehrfeld can be extended by adding a surface micromachining phase to produce precision metal parts which can be assembled to form three-dimensional micromechanisms. This process, SLIGA, has been used to fabricate a dynamometer on a chip. The instrument has been fully implemented and will be applied to tribology issues, speed-torque characterization of planar magnetic micromotors and a new family of sensors.

Guckel, H.↗
NASA NTRS1994

Near-net-shape manufacturing: Spray-formed metal matrix composites and tooling

Spray forming is a materials processing technology in which a bulk liquid metal is converted to a spray of fine droplets and deposited onto a substrate or pattern to form a near-net-shape solid. The technology offers unique opportunities for simplifying materials processing without sacrificing, and oftentimes substantially improving, product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offers property improvements resulting from rapid solidification (e.g. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. The Idaho National Engineering Laboratory is developing a unique spray-forming method, the Controlled Aspiration Process (CAP), to produce near-net-shape solids and coatings of metals, polymers, and composite materials. Results from two spray-accompanying technical and economic benefits. These programs involved spray forming aluminum strip reinforced with SiC particulate, and the production of tooling, such as injection molds and dies, using low-melting-point metals.

Mchugh, Kevin M.↗
NASA NTRS1993

Microscopic iron metal on glass and minerals - A tool for studying regolith maturity

A novel method of producing mixtures of glass or minerals with iron metal is presented. A portion of the Fe(2+) in basaltic glass and minerals can be reduced to metal in a few hours at 1100 C and an oxygen fugacity well below the iron-wustite buffer. Part of the iron metals forms rounded submicrometer blebs on the surfaces and in some cases within the grains. A concentration of such blebs equivalent to 20-30 percent of a grain's surface area can totally dominate the reflectance spectra of basaltic glass, pyroxene, and olivine. The production of optically opaque iron metal blebs, combined with the decline in Fe(2+), affects the glass and mineral reflectance spectra in three ways: by lowering the overall reflectivity, reducing the spectral contrast of absorption features, and producing a continuum with a general rise in reflectivity toward longer wavelengths.

Allen, C. C.↗
NASA NTRS1994

One-step synthesis of dithiocarbamates from metal powders

Neutral metal dithiocarbamate complexes (M(NR2CS2)X) are well-known precursors to metal sulfides, a class of materials with numerous technological applications. We are involved in a research effort to prepare new precursors to metal sulfides using simple, reproducible synthetic procedures. We describe the results of our synthetic and characterization studies for M = Fe, Co, Ni, Cu. and In. For example, treatment of metallic indium with tetramethylthiuram disulfide (tmtd) in 4-methylpyridine (4-Mepy) at 25 deg C produces a new homoleptic indium (III) dithiocarbamate, In(N(CH3)2CS2)3(I), in yields of over 60 percent. The indium (III) dithiocarbamate was characterized by X-ray crystallography; (I) exists in the solid state as discrete distorted-octahedral molecules. Compound (I) crystallizes in the P1bar (No. 2) space group with lattice parameters: a = 9.282(1) A, b = 10.081(1) A, c = 12.502 A, alpha = 73.91(1) deg, beta = 70.21(1) deg, gamma = 85.8(1)deg, and Z = 2. X-ray diffraction and mass spectral data were used to characterize the products of the analogous reactions with Fe, Co, Ni, and Cu. We discuss both use of dithiocarbamates as precursors and our approach to their preparation.

Hepp, Aloysius F.↗
NASA NTRS1994

Split mandrel versus split sleeve coldworking: Dual methods for extending the fatigue life of metal structures

It is common practice to use split sleeve coldworking of fastener holes as a means of extending the fatigue life of metal structures. In search of lower manufacturing costs, the aerospace industry is examining the split mandrel (sleeveless) coldworking process as an alternative method of coldworking fastener holes in metal structures. The split mandrel process (SpM) significantly extends the fatigue life of metal structures through the introduction of a residual compressive stress in a manner that is very similar to the split sleeve system (SpSl). Since the split mandrel process is significantly less expensive than the split sleeve process and more adaptable to robotic automation, it will have a notable influence upon other new manufacture of metal structures which require coldworking a significant number of holes, provided the aerospace community recognizes that the resulting residual stress distributions and fatigue life improvement are the same for both processes. Considerable testing has validated the correctness of that conclusion. The findings presented in this paper represent the results of an extensive research and development program, comprising data collected from over 400 specimens fabricated from 2024-T3 and 7075-T651 aluminum alloys in varied configurations, which quantify the benefits (fatigue enhancement and cost savings) of automating a sleeveless coldworking system.

Rodman, Geoffrey A.↗
NASA NTRS1995

Collection and review of metals data obtained from LDEF experiment specimens and support hardware

LDEF greatly extended the range of data available for metals exposed to the low-Earth-orbital environment. The effects of low-Earth-orbital exposure on metals include meteoroid and debris impacts, solar ultraviolet radiation, thermal cycling, cosmic rays, solar particles, and surface oxidation and contamination. This paper is limited to changes in surface composition and texture caused by oxidation and contamination. Surface property changes afford a means to study the environments (oxidation and contamination) as well as in-space stability of metal surfaces. We compare thermal-optical properties for bare aluminum and anodized aluminum clamps flown on LDEF. We also show that the silicon observed on the LDEF tray clamps and tray clamp bolt heads is not necessarily evidence of silicon contamination of LDEF from the shuttle. The paper concludes with a listing of LDEF reports that have been published thus far that contain significant findings concerning metals.

Bourassa, Roger↗
NASA NTRS1995

Evaluation of space environmental effects on metals and optical thin films on EOIM-3

Metals and optical thin films exposed to the space environment on the Third Flight of the Evaluation of Oxygen Interactions with Materials (EOIM-3) payload, onboard Space Shuttle mission STS-46 were evaluated. The materials effects described in this paper include the effects of space exposure on various pure metals, optical thin films, and optical thin film metals. The changes induced by exposure to the space environment in the material properties were evaluated using bidirectional reflectance distribution function (BRDF), specular reflectance (250 nm to 2500 nm), ESCA, VUV reflectance (120 nm to 200 nm), ellipsometry, FTIR and optical properties. Using these analysis techniques gold optically thin film metal mirrors with nickel undercoats were observed to darken due to nickel diffusion through the gold to the surface. Also, thin film nickel mirrors formed nickel oxide due to exposure to both the atmosphere and space.

Vaughn, Jason A.↗
NASA NTRS1994

Comprehensive stellar population models and the disentanglement of age and metallicity effects

The construction of detailed models for intermediate and old stellar populations is described. Input parameters include metallicity (-2 less than (Fe/H) less than 0.5), single-burst age (between 1.5 and 17 Gyr), and initial mass function (IMF) exponent. Quantities output include broadband magnitudes, spectral energy distributions, surface brightness fluctuation magnitudes, and a suite of 21 absorption feature indices. The models are checked against a wide variety of available observations. Examinations of model output yield the following conclusions. (1) If the percentage change delta age/delta Z approximately equals 3/2 for two populations, they will appear almost identical in most indices. A few indices break this degeneracy by being either more abundance sensitive (Fe4668, Fe5015, Fe5709, and Fe5782) or more age sensitive (G4300, H beta, and presumably higher order Balmer lines) than usual. (2) Present uncertainties in stellar evolution are of the same magnitude as the effects of IMF and Y in the indices studied. (3) Changes in abundance ratios (like (Mg/Fe)) are predicted to be readily apparent in the spectra of old stellar populations. (4) The I-band flux of a stellar population is predicted to be nearly independent of metallicity and only modestly sensitive to age. The I band is therefore recommended for standard candle work or studies of M/L in galaxies. Other conclusions stem from this work. (1) Intercomparison of models and observations of two TiO indices seem to indicate variation of the (V/Ti) ratio among galaxies, but it is not clear how this observation ties into the standard picture of chemical enrichment. (2) Current estimates of (Fe/H) for the most metal-rich globulars that are based on integrated indices are probably slightly too high. (3) Colors of population models from different authors exhibit a substantial range. At solar metallicity and 13 Gyr, this range corresponds to an age error of roughly +/- 7 Gyr. Model colors from different authors applied in a differential sense have smaller uncertainties. (4) In the present models the dominant error for colors is probably the transformation from stellar atmospheric parameters to stellar colors. (5) Stellar B - V is difficult to model, and current spreads among different authors can reach 0.2 mag. (6) If known defects in the stellar flux library are corrected, the population model colors of this work in passbands redder than U would be accurate to roughly 0.03 mag in an absolute sense. These corrections are not made in the tables of model output.

Worthey, Guy↗
NASA NTRS1994

AH Cam: A metal-rich RR Lyrae star with the shortest known Blazhko period

Analysis of 746 new V-band observations of the RR Lyrae star AH Cam obtained during 1989 - 1992 clearly show that its light curve cannot be described by a single period. In fact, at first glance, the Fourier spectrum of the photometry resembles that of a double-mode pulsator, with peaks at a fundamental period of 0.3686 d and an apparent secondary period of 0.2628 d. Nevertheless, the dual-mode solution is a poor fit to the data. Rather, we believe that AH Cam is a single-mode RR Lyrae star undergoing the Blazhko effect: periodic modulation of the amplitude and shape of its light curve. What was originally taken to be the period of the second mode is instead the 1-cycle/d alias of a modulation sidelobe in the Fourier spectrum. The data are well described by a modulation period of just under 11 d, which is the shortest Blazhko period reported to date in the literature and confirms the earlier suggestion by Goranskii. A low-resolution spectrum of AH Cam indicates that it is relatively metal rich, with delta-S less than or = 2. Its high metallicity and short modulation period may provide a critical test of at least one theory for the Blazhko effect. Moskalik's internal resonance model makes specific predictions of the growth rate of the fundamental model vs fundamental period. AH Cam falls outside the regime of other known Blazhko variables and resonance model predictions, but these are appropriate for metal-poor RR Lyrae stars. If the theory matches the behavior of AH Cam for a metal-rich stellar model, this would bolster the resonance hypothesis.

Smith, Horace A.↗