Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mixed Oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Modeling of surface-state induced inter-electrode isolation of n -on- p devices in mixed-field and γ -irradiation environments

Position sensitive n-on-p silicon sensors will be utilized in the tracker and in the High Granularity Calorimeter (HGCAL) of the Compact Muon Solenoid (CMS) experiment at High Luminosity Large Hadron Collider (HL-LHC). The detrimental effect of the radiation-induced accumulation of positive net oxide charge on position resolution in n-on-p sensors has typically been countered by the application of isolation implants like p-stop or p-spray between n + -electrodes. In addition to the positively charged layer inside the oxide and close to the Si/SiO 2 -interface, surface damage introduced by ionizing radiation in SiO 2 -passivated silicon particle detectors includes the accumulation of trapped-oxide-charge and interface traps. A previous study of either n/γ (mixed field)- or γ-irradiated Metal-Oxide-Semiconductor (MOS) capacitors showed evidence of substantially higher introduction rates of acceptor- and donor-type deep interface traps (N it,acc/don ) in mixed-field environment. Here, in this work, an inter-pad and -strip resistance (or resistivity (ρ int )) simulation study of n-on-p sensors with and without p-stop isolation implants was conducted for both irradiation types. Higher levels of ρint showed correlation to higher densities of deep N it,acc/don , with the inter-pad isolation performance of the mixed-field irradiated sensors becoming independent of the presence of p-stop implant between the n + - electrodes up to about 100 kGy. The low introduction rates of deep N it,acc/don in γ-irradiated sensors resulted in high sensitivity of ρ int to the presence and peak doping of p-stop above the lowest dose of about 7 kGy in the study. As a consequence of the advantageous influence of radiation-induced accumulation of deep N it on the inter-electrode isolation, position sensitive n-on-p sensors without isolation implants may be considered for future HEP-experiments where the radiation is largely due to hadrons.

Akchurin, N. [Texas Tech Univ., Lubbock, TX (Unite↗
DOE OSTI2020

Bimetallics in a Nutshell: Complexes Supported by Chelating Naphthyridine-Based Ligands

Bimetallic motifs are a structural feature common to some of the most effective and synthetically useful catalysts known, including in the active sites of many metalloenzymes and on the surfaces of industrially relevant heterogeneous materials. However, the complexity of these systems often hampers detailed studies of their fundamental properties. To glean valuable mechanistic insight into how these catalysts function, this research group has prepared a family of dinucleating 1,8-naphthyridine ligands that bind two first-row transition metals in close proximity, originally designed to help mimic the proposed active site of metal oxide surfaces. Of the various bimetallic combinations examined, dicopper(I) is particularly versatile, as neutral bridging ligands adopt a variety of different binding modes depending on the configuration of frontier orbitals available to interact with the Cu centers. Organodicopper complexes are readily accessible, either through the traditional route of salt metathesis or via the activation of tetraarylborate anions through aryl group abstraction by a dicopper(I) unit. The resulting bridging aryl complexes engage in C-H bond activations, notably with terminal alkynes to afford bridging alkynyl species. In this work, the μ-hydrocarbyl complexes are surprisingly tolerant of water and elevated temperatures. This stability was leveraged to isolate a species that typically represents a fleeting intermediate in Cu-catalyzed azide-alkyne coupling (CuAAC); reaction of a bridging alkynyl complex with an organic azide afforded the first example of a well-defined, symmetrically bridged dicopper triazolide. This complex was shown to be an intermediate during CuAAC, providing support for a proposed bimetallic mechanism. These platforms are not limited to formally low oxidation states; chemical oxidation of the hydrocarbyl complexes cleanly results in formation of mixed valence Cu I Cu II complexes with varying degrees of distortion in both the bridging moiety and the dicopper core. Higher oxidation states, e.g. , dicopper(II), are easily accessed via oxidation of a dicopper(I) compound with air to give a Cu II 2 (μ-OH) 2 complex. Reduction of this compound with silanes resulted in the unexpected formation of pentametallic copper(I) dihydride clusters or trimetallic monohydride complexes, depending on the nature of the silane. Finally, development of an unsymmetrical naphthyridine ligand with mixed donor side-arms enables selective synthesis of an isostructural series of six heterobimetallic complexes, demonstrating the power of ligand design in the preparation of heterometallic assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The growth and nanothermite reaction of 2Al/3NiO multilayer thin films

Nanothermite NiO–Al is a promising material system for low gas emission heat sources; still, its reactive properties are highly dependent on material processing conditions. In the current study, sputter deposition is used to fabricate highly controlled nanolaminates comprised of alternating NiO and Al layers. Films having an overall stoichiometry of 2Al to 3NiO were produced with different bilayer thicknesses to investigate how ignition and self-sustained, high temperature reactions vary with changes to nanometer-scale periodicity and preheat conditions. Ignition studies were carried out with both hot plate and laser irradiation and compared to slow heating studies in hot-stage x-ray diffraction. Ignition behavior has bilayer thickness and heating rate dependencies. The 2Al/3NiO with λ ≤ 300 nm ignited via solid/solid diffusion mixing (activation energy, E a = 49 ± 3 kJ/mole). Multilayers having λ ≥ 500 nm required a more favorable mixing kinetics of solid/liquid dissolution into molten Al (E a = 30 ± 4 kJ/mole). This solid/liquid dissolution E a is a factor of 5 lower than that of the previously reported powder compacts due to the elimination of a passivating Al oxide layer present on the powder. The reactant mixing mechanism between 300 and 500 nm bilayer thicknesses was dependent on the ignition source's heating rate. The self-propagating reaction velocities of 2Al/3NiO multilayers varied from 0.4 to 2.5 m/s. Pre-heating nanolaminates to temperatures below the onset reaction temperatures associated with forming intermediate nickel aluminides at multilayer interfaces led to increased propagation velocities, whereas pre-heating samples above the onset temperatures inhibited subsequent attempts at laser ignition.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Highly Efficient Vacuum Smelting of Aluminum

The goal of this SBIR project was to develop and demonstrate an innovative aluminum smelting technology that will significantly increase the range of aluminum alloys that can be manufactured from recycling of scrap aluminum. This will result in reduction of need for primary aluminum with corresponding 95% energy and CO 2 emission benefits. The proposed melting of pre-sorted aluminum alloys using UHV’s patented high throughput sorter funded by ARPA-E METALS program in an energy efficient vacuum furnace avoids the typical 5% metal loss due to oxidation of molten metal. In addition, pre-sorting scrap into different categories (cast, wrought, extrusion and aerospace) allows lower cost production of high value aluminum alloys without the need for adding alloying elements to primary aluminum. During this SBIR project, pure aluminum and several different commercial alloys were procured and melted in a laboratory furnace in vacuum, CH4 and air environments. The slag and oxidation formation were measured using weight and cross-sectional scanning electron microscope. The results otained were mixed and did not show direct correlation between furnace pressure and oxidation. We believe that the results were tainted due to small furnace size and non-uniformity of oxidation layer. A more thorough investigation is required to prove the advantages of vacuum smelting which could not be performed due to the COVID-19 lockdowns during this project. The theoretical fact remains that in the absence of oxygen in the furnace, there should be no oxide after melting, however the team could not prove it experimentally, and thus decided to dis-continue the project.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Thermodynamics, local structure, and transport of protons in triple-conducing oxide, BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3-δ (BCFZY4411)

Triple-conducting oxides (TCOs) are an emerging class of mixed ionic and electronically conducting materials that show great promise for oxygen reduction/oxygen evolution (ORR/OER) electrocatalysis—primarily in high-temperature ceramic electrochemical cells— but also in aqueous alkaline environments. Their high activity is attributed, at least in part, to their ability to incorporate and transport three mobile charge carriers: protons, oxygen vacancies, and electron-holes Despite their promise, fundamental studies of TCOs are challenging, as transport dynamics from three charge carriers cannot be fully disentangled via traditional electrical measurement techniques. Characterizing proton dynamics in TCOs is particularly difficult as protons are generally the minority carrier, and their conduction response is typically obscured by the oxygen vacancies and electron holes. Here, we demonstrate successful isolation of the proton behavior in an archetypal TCO, BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3-δ (BCFZY4411), using a combination of non-electrical techniques. We determine proton uptake and oxygen non-stoichiometry (δ) using thermogravimetric analysis (TGA). X-ray absorption near edge structure (XANES) and neutron diffraction (ND) are used to validate the oxidation state of Co and the δ values obtained through TGA. We apply 1H solid-state magic-angle-spinning (MAS) nuclear magnetic resonance (NMR) to provide insights into local structure, dynamics, and proton kinetics. Finally, the proton transport properties are further quantified using tracer isotope exchange with time-of-flight secondary ion mass spectrometry (ToF-SIMS). Despite the very low proton concentrations in BCFZY4411 (<0.2% under most conditions), our analysis suggests that the oxygen Manuscript File Click here to view linked References 2 reduction and evolution reactions are nevertheless limited by the oxygen ion kinetics (e.g., oxygen surface exchange) rather than the proton kinetics at the reduced operating temperatures (<500 °C) that are targeted for electrochemical cell applications. These findings provide a comprehensive understanding of proton behavior in BCFZY4411 and pave the way for advancing the fundamental study of TCOs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Stabilization of Preternatural Barium Oxidation States as an Unexpected Byproduct of β-Decay: Discovery of a New Halide Semiconductor Alloy

137 Cs has a wide range of roles in the nuclear industry. The solid material, safely encapsulated in CsCl as 137 CsCl, is stored as fission product waste from nuclear power production and legacy waste from nuclear weapons production; it has also served as a radiation source in food and sewage irradiators as well as medical devices. However, because of the solubility of the chloride salt and the relatively high specific activity of 137 Cs, damaged or broken capsules can lead to severe radiological accidents. Safe capsule design and material recycling are complicated by the unclear structural evolution during β-decay, which remains ambiguous due to the differing oxidation states of Cs (1+) and Ba (2+). Here, in this study, we use first-principles calculations to investigate the evolving structure–property relationships of Cs 1–x Ba x Cl during β-decay. Despite the well-established 2+ formal oxidation state of alkali-earth metals, we find that Ba 1+ can be stabilized in the form of a mixed-valence alloy at low concentrations. Specifically, we identify three regimes for the β-decay of 137 Cs into CsCl: Ba-doped CsCl (Ba ≤ 14%), wherein Ba has the expected 2+ oxidation state; Cs–Ba–Cl alloys, where Ba has a mix of the usual Ba 2+ and highly unusual Ba 1+ oxidation state in the form of a quasi-disordered mixed-valence alloy (Ba = 25%); and phase separation into a CsCl + BaCl 2 + Ba (m) mechanical mixture, where Ba reverts to its expected 2+ oxidation state (Ba > 25%). Surprisingly, the Cs 0.75 Ba 0.25 Cl mixed-valence alloy is a narrow indirect band gap semiconductor (1.05 eV) despite the insulating nature of both CsCl and BaCl 2 . It also exhibits strongly excitonic polarized optical properties, has glass-like ultralow thermal conductivity (directional average of 0.21 W/mK at 300 K), and shows greater resistance to deformation under both tensile and volumetric strengths compared with the original CsCl structure (e.g., shear and Young’s modulus of 9.04 and 31.62 GPa, respectively). These findings imply that transmutation of 137 Cs leads to highly unusual chemical bonding that stabilizes Ba 1+ in local regions of the quasi-disordered Cs 0.25 Ba 0.75 Cl, resulting in anomalous physical properties. Moreover, this discovery provides valuable insight for safe nuclear waste capsule design, which can aid in preventing environmental or human exposure to radioactive materials.

Fuhr, Addis S. [Oak Ridge National Laboratory (ORN↗
DOE OSTI2024

Chemical properties and single-particle mixing state of soot aerosol in Houston during the TRACER campaign

Abstract. A high-resolution soot particle aerosol mass spectrometer (SP-AMS) was used to selectively measure refractory black carbon (rBC) and its associated coating material using both the ensemble size-resolved mass spectral mode and the event trigger single particle (ETSP) mode in Houston, Texas, in summer 2022. This study was conducted as part of the Department of Energy Atmospheric Radiation Measurement (ARM) program's TRacking Aerosol Convection interactions ExpeRiment (TRACER) field campaign. The study revealed an average (±1σ) rBC concentration of 103 ± 176 ng m−3. Additionally, the coatings on the BC particles were primarily composed of organics (59 %; 219 ± 260 ng m−3) and sulfate (26 %; 94 ± 55 ng m−3). Positive matrix factorization (PMF) analysis of the ensemble mass spectra of BC-containing particles resolved four distinct types of soot aerosol, including an oxidized organic aerosol (OOABC,PMF) factor associated with processed primary organic aerosol, an inorganic sulfate factor (SO4,BC,PMF), an oxidized rBC factor (O-BCPMF), and a mixed mineral dust–biomass burning aerosol factor with significant contribution from potassium (K-BBBC,PMF). Additionally, K-means clustering analysis of the single-particle mass spectra identified eight different clusters, including soot particles enriched in hydrocarbon-like organic aerosol (HOABC,ETSP), sulfate (SO4,BC,ETSP), two types of rBC, OOA (OOABC,ETSP), chloride (ClBC,ETSP), and nitrate (NO3,BC,ETSP). The single-particle measurements demonstrate substantial variation in BC coating thickness with coating-to-rBC mass ratios ranging from 0.1 to 100. The mixing state index (χ), which denotes the degree of homogeneity of the soot aerosol, varied from 4 % to 94 % with a median of 40 %, indicating that the aerosol population lies in between internal and external mixing but has large temporal and source type variability. In addition, a significant fraction of BC-containing particles, a majority enriched with oxidized organics and sulfate, exhibit sufficiently high κ values and diameters conducive to activation as cloud nuclei under atmospherically relevant supersaturation conditions. This finding bears significance in comprehending the aging processes of rBC-containing particles and their activation into cloud droplets. Our analysis highlights the complex nature of soot aerosol and underscores the need to comprehend its variability across different environments for accurate assessment of climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Operational stability of mixed Sn–Pb perovskite solar cells: Mechanisms, mitigation strategies, and perspectives

Mixed Sn–Pb perovskites provide the 1.2–1.3 eV narrow-bandgap absorber needed for high efficiency of all perovskite tandems, but their deployment is limited by operational instability under light. This review synthesizes mechanistic origins and recent mitigation strategies for mixed Sn–Pb perovskite solar cells. The oxidation of Sn 2+ to Sn 4+ , often driven by iodine formation under light and bias, is the primary failure pathway; it creates Sn vacancies, self-doping, and nonradiative loss. Surface/grain-boundary defects, halide migration, reactive oxygen species, and interfacial redox at charge-transport layers, along with hole accumulation from poor band alignment, further accelerate Sn–Pb perovskite degradation. Here we survey recent stability advances across additive chemistry, surface and grain-boundary passivation, buried-interface redesign with modified or alternative hole transport layers, and solvent systems that preserve Sn 2+ and correct Sn–Pb speciation for scalable coating. Together, these recent advances have enabled devices to retain 80%–90% output for hundreds to over a thousand hours. Lastly, we provide our perspectives on further improving the operational stability of Sn–Pb perovskite and solar cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Bio‐Based Piezo‐ and Thermoresistive Photocurable Sensing Materials from Acrylated Epoxidized Soybean Oil

Abstract Bio‐based photocurable polymers are increasingly in demand as environmentally friendly materials for advanced applications. Together with functional fillers, these represent a next step for the generation of functional and active smart materials, compatible with additive manufacturing technologies. Herein, acrylated epoxidized soybean oil (AESO) mixed with different amounts of reduced graphene oxide (rGO) up to 6 wt% in order to obtain UV‐curable piezoresistive and thermoresistive materials, is reported. It is shown that the addition of rGO to AESO hinders the curing process, but always maintains double bond conversions higher than 50%. Composites are characterized by a good dispersion of micrometric filler clusters. Further, the thermal stabilities are close to 300 °C and crosslinking degrees are above 1.75 mmol cm –3 . The Young modulus of the composites decreases with the addition of the rGO fillers, in particular for the higher filler contents, and electrical conductivities up to 0.13 S m –1 are obtained for the composites with the highest rGO content. UV‐curable composites with piezoresistive and thermoresistive responses suitable for applications are thus obtained, characterized by gauge factors around 26 for deformations up to 2% and maximum thermoresistive sensitivity of S = 0.43, values similar to the values obtained for petroleum‐based materials.

Mendes‐Felipe, Cristian↗
DOE OSTI2026

The Modulated Crystal Structure of K 2 V 3 O 8

Weak lattice distortions can tune exchange pathways and magnetic interactions in square-lattice quantum magnets. K 2 V 3 O 8 is a mixed valence (V 4+ /V 5+ ) fresnoite oxide that exhibits strong spin–lattice coupling at low temperature. Here, we combine single-crystal neutron diffraction (90 K) and laboratory X-ray diffraction (50 K) to solve the low-temperature structure as an orthorhombic (3 + 1)D incommensurately modulated phase in superspace group Cmm2(β,0,1/2)0s0 [No. 196]. What initially appeared as two independent modulation vectors, q 1 = 0.3132(6)[$110$] + 1/2c* and q 2 = 0.3132(6)[$1\bar{10}$] + 1/2c*, are more naturally described as a single one-dimensional modulation wave q = 0.626(1)a* + 1/2c* in a C-centered orthorhombic lattice, related to the parent tetragonal cell by the transformation a + b, −a + b, c. Refinement with a 4-fold rotational twin inherited from the P4bm parent structure solves oxygen-dominated framework distortions and K + displacements. A de Wolff section (t = 0.40) enables a symmetry-mode decomposition, identifying three dominant mm2 (C 2v ) modes: GM3 for framework tilt, A5 for interlayer shear, and Z5 for c-axis breathing. The mode-resolved structure provides a unified, symmetry-based explanation for reported low-temperature Raman and IR anomalies and clarifies the structural origin of the spin–lattice coupling in the S = 1/2 two-dimensional quantum spin compound.

K2V3O8↗
DOE OSTI2025

Toward Optimization of Polymer Electrolytes by Electrochemical Characterization: Poly(pentyl malonate) versus Poly(ethylene oxide)

Ion transport in two polymer electrolytes, poly­(ethylene oxide) (PEO) and poly­(pentyl malonate) (PPM), mixed with lithium bis­(trifluoromethanesulfonyl)­imide (LiTFSI) is studied in the vicinity of the limiting current. The experimental measurements are in quantitative agreement with theoretical predictions based on the concentrated solution theory. The properties of two electrolytes are compared using a new plot wherein the length-normalized limiting current, i lim L, is plotted as a function of the length-normalized potential drop, Φlim/L, in symmetric cells with electrolyte thickness, L. We propose that electrolyte design should aim to obtain the largest values of i lim L and the smallest values of Φlim/L. Using this criterion, PPM/LiTFSI is a better polymer electrolyte than PEO/LiTFSI. We hope that PPM/LiTFSI will serve as a benchmark for developing next-generation polymer electrolytes.

Lee, Jaeyong↗
DOE OSTI2026

Stabilizing Iodine in 2D Mixed Halide Perovskites: Dion–Jacobson Versus Ruddlesden–Popper Phases

Iodine electrochemistry plays an important role in driving iodide‐oxidation induced halide migration in 3D halide perovskites. When subjected to light illumination or electrochemical bias, mixed halide perovskites undergo halide segregation followed by iodine expulsion from the crystal lattices. To mitigate such intrinsic halide ion mobility in 3D perovskites, lower‐dimensional (2D) perovskites are employed as barriers to stabilize the perovskite layers. Interestingly, 2D halide perovskites also exhibit halide ion mobility that is dependent on the binding configuration, viz., Ruddlesden–Popper (RP) and Dion–Jacobson (DJ) phases. Hybrid RP‐DJ perovskites with a mixed Br:I ratio of 50:50 show increased stability following continuous photoirradiation. Spectroscopic studies that probe iodine migration and expulsion in photoirradiated 2D films of different configurations are presented here. The effective strategy of blending two different 2D phases (RP‐DJ) offers new opportunities to develop stable 2D/3D perovskite interfaces in solar cells.

2D halide perovskites↗
DOE OSTI2021

Water vapor oxidation of SiC layer in surrogate TRISO fuel particles

Under accidental conditions for high temperature gas-cooled reactors (HTGR), the SiC layer in tri-structural-isotropic (TRISO) fuel particles can be exposed to water vapor. In this study, oxidation behaviors of surrogate TRISO fuel particles were investigated in a He-20 vol% water vapor mixed atmosphere at temperatures up to 1600 °C. The growth of the crystalline oxide passivation layer with cracks and pores followed a parabolic law with time, where the maximum was 2.3 μm at 1600 °C. The oxide layer and the SiC surface under the oxide became flattened with increasing temperature, as a function of the silica viscosity and the diffusion path of water vapor. Volatilization of the oxide layer was analyzed using a mechanistic model that an inert gas in oxidizing atmospheres could influence the magnitude of volatilization. The fracture load and strength of the oxidized and thinned SiC layer were numerically estimated to decrease from 2.27 to 1.69 N and from 317 to 299 MPa, respectively, with the SiC thickness decrease from 35 to 32 μm. This prediction indicates that the oxidized SiC layer should retain fission products. Additionally, the mechanical integrity of each layer in the TRISO fuel particle after oxidation was evaluated. The results in this work provide important data for the safety analysis of accidental scenarios in HTGRs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

New Compounds and Phase Selection of Nickel Sulfides via Oxidation State Control in Molten Hydroxides

Molten salts are promising reaction media candidates for the discovery of novel materials; however, they offer little control over oxidation state compared to aqueous solutions. Here, we demonstrated that when two hydroxides are mixed, their melts become fluxes with tunable solubility, which are surprisingly powerful solvents for ternary chalcogenides and offer effective paths for crystal growth to new compounds. We report that precise control of the oxidation state of Ni is achievable in mixed molten LiOH/KOH to grow single crystals of all known ternary K-Ni-S compounds. It is also possible to access several new phases, including a new polytope of β-K 2 Ni 3 S 4 , as well as low-valence KNi 4 S 2 and K 4 Ni 9 S 11 . KNi 4 S 2 is a two-dimensional low-valence nickel-rich sulfide, and β-K 2 Ni 3 S 4 has a hexagonal lattice. Moreover, using KNi 4 S 2 as a template, we obtained a new layered binary Ni 2 S by topotactic deintercalation of K. The new binary Ni 2 S has a van der Waals gap and can function as a new host layer for intercalation chemistry, as demonstrated by the intercalation of LiOH between its layers. The oxidation states of low-valence KNi 4 S 2 and Ni 2 S were studied using X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. Density functional theory calculations showed large antibonding interactions at the Fermi level for both KNi 4 S 2 and Ni 2 S 2 corresponding to the flat-bands with large Ni-d$_{x^2}$$_{y^2}$ character.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultrasmall Cu Nanoparticles Supported on Crystalline, Mesoporous ZnO for Selective CO 2 Hydrogenation

Converting CO 2 to value-added chemicals, e. g., CH 3 OH, is highly desirable in terms of the carbon cycling while reducing CO 2 emission from fossil fuel combustion. Cu-based nanocatalysts are among the most efficient for selective CO 2 -to-CH 3 OH transformation; this conversion, however, suffers from low reactivity especially in the thermodynamically favored low temperature range. We herein report ultrasmall copper (Cu) nanocatalysts supported on crystalline, mesoporous zinc oxide nanoplate (Cu@mZnO) with notable activity and selectivity of CO 2 -to-CH 3 OH in the low temperature range of 200–250 °C. Cu@mZnO nanoplates are prepared based on the crystal-crystal transition of mixed Cu and Zn basic carbonates to mesoporous metal oxides and subsequent hydrogen reduction. Under the nanoconfinement of mesopores in crystalline ZnO frameworks, ultrasmall Cu nanoparticles with an average diameter of 2.5 nm are produced. Cu@mZnO catalysts have a peak CH 3 OH formation rate of 1.13 mol h −1 per 1 kg under ambient pressure at 246 °C, about 25 °C lower as compared to that of the benchmark catalyst of Cu−Zn−Al oxides. In conclusion, our new synthetic strategy sheds some valuable insights into the design of porous catalysts for the important conversion of CO 2 -to-CH 3 OH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Exposure of Stainless Steel 316 to Subcritical, Transition, and Near-Supercritical Water

This work investigates the oxidation of austenitic stainless steel 316 at temperatures close to the critical point of water: subcritical water at 330°C and 27 MPa, the transition between subcritical and supercritical water at 374°C and 27 MPa, and supercritical water (SCW) at 380°C and 27 MPa. The surfaces of the samples were characterized using x-ray diffraction, Raman spectroscopy, scanning electron microscopy, and x-ray photoelectron spectroscopy before and after exposure. Magnetite (Fe3O4) was found to be present on all surfaces of all samples. The samples exposed to subcritical water also showed the presence of a nickel-iron chromium mixed spinel Ni(Fe2-xCrx)O4. The oxide morphology was observed to vary based on exposure temperature; an increased nucleation and growth rate, and an increased generation of Fe2+ was observed on samples exposed to the transition region and SCW.

Materials Science↗
DOE OSTI2020

Charging Reactions Promoted by Geometrically Necessary Dislocations in Battery Materials Revealed by In Situ Single-Particle Synchrotron Measurements

Crystallographic defects exist in many redox active energy materials, e.g., battery and catalyst materials, which significantly alter their chemical properties for energy storage and conversion. However, there is lack of quantitative understanding of the interrelationship between crystallographic defects and redox reactions. Herein, crystallographic defects, such as geometrically necessary dislocations, are reported to influence the redox reactions in battery particles through single-particle, multimodal, and in situ synchrotron measurements. Through Laue X-ray microdiffraction, many crystallographic defects are spatially identified and statistically quantified from a large quantity of diffraction patterns in many layered oxide particles, including geometrically necessary dislocations, tilt boundaries, and mixed defects. The in situ and ex situ measurements, combining microdiffraction and X-ray spectroscopy imaging, reveal that LiCoO 2 particles with a higher concentration of geometrically necessary dislocations provide deeper charging reactions, indicating that dislocations may facilitate redox reactions in layered oxides during initial charging. The present study illustrates that a precise control of crystallographic defects and their distribution can potentially promote and homogenize redox reactions in battery materials.

25 ENERGY STORAGE↗