Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model discrepancy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Computational Fluid Dynamics (CFD) Simulations of Taylor Bubbles in Vertical and Inclined Pipes with Upward and Downward Liquid Flow

Summary Two-phase flow is a common occurrence in pipes of oil and gas developments. Current predictive tools are based on the mechanistic two-fluid model, which requires the use of closure relations to predict integral flow parameters such as liquid holdup (or void fraction) and pressure gradient. However, these closure relations carry the highest uncertainties in the model. In particular, significant discrepancies have been found between experimental data and closure relations for the Taylor bubble velocity in slug flow, which has been determined to strongly affect the mechanistic model predictions (Lizarraga-García 2016). In this work, we study the behavior of Taylor bubbles in vertical and inclined pipes with upward and downward flow using a validated 3D computational fluid dynamics (CFD) approach with level set method implemented in a commercial code. A total of 56 cases are simulated, covering a wide range of fluid properties, pipe diameters, and inclination angles: Eo ∈ [10, 700]; Mo ∈ [1×10–6, 5×103]; ReSL ∈ [–40, 10]; θ ∈ [5°, 90°]. For bubbles in vertical upward flows, the simulated distribution parameter, C0, is successfully compared with an existing model. However, the C0 values of downward and inclined slug flows where the bubble becomes asymmetric are shown to be significantly different from their respective vertical upward flow values, and no current model exists for the fluids simulated here. The main contributions of this work are (1) the relatively large 3D numerical database generated for this type of flow, (2) the study of the asymmetric nature of inclined and some vertical downward slug flows, and (3) the analysis of its impact on the distribution parameter, C0.

Engineering↗

Direct measurement of the muonic content of extensive air showers between 2 $\times$ 10 17 and 2 $\times$ 10 18 eV at the Pierre Auger Observatory

The hybrid design of the Pierre Auger Observatory allows for the measurement of the properties of extensive air showers initiated by ultra-high energy cosmic rays with unprecedented precision. By using an array of prototype underground muon detectors, we have performed the first direct measurement, by the Auger Collaboration, of the muon content of air showers between 2 $\times$ 10 17 and 2 $\times$ 10 18 eV. We have studied the energy evolution of the attenuation-corrected muon density, and compared it to predictions from air shower simulations. The observed densities are found to be larger than those predicted by models. We quantify this discrepancy by combining the measurements from the muon detector with those from the Auger fluorescence detector at 10 17.5 eV and 10 18 eV. We find that, for the models to explain the data, an increase in the muon density of 38% $±$4%(12%) $±^{21\%}_{18\%}$ for EPOS-LHC, and of 50%(53%) $±$4%(13%) $±^{23\%}_{20\%}$ for QGSJETII-04, is respectively needed.

79 ASTRONOMY AND ASTROPHYSICS↗

Age-erosion constraints on an Early Pleistocene paleosol in Yukon, Canada, with profiles of 10 Be and 26 Al: Evidence for a significant loess cover effect on cosmogenic nuclide production rates

We report that Wounded Moose type paleosols developed on remnant deposits of Late Pliocene to Early Pleistocene [pre-Reid] Cordilleran Ice Sheet [CIS] glaciations in central Yukon, Canada. It is an important regional soil-geomorphic marker at the boundary between early CIS advances and the non-glaciated regions of Yukon and Alaska. Yet, at present, its age is poorly constrained between the Reid [0.2 Ma] and earliest [2.84 Ma] CIS advances. Here, we apply depth profiles of in situ-produced cosmogenic 26 Al and 10 Be to obtain both a minimum exposure age [1.12 +0.44 / -0.36 Ma, 2σ] and maximum erosion rate [1.1 +0.9 / -0.5 m Myr -1 ] for the Wounded Moose paleosol. Here, our results show that this soil formed under exceptionally stable conditions [max erosion rate similar to polar bedrock erosion rates] and that it pre-dates the emergence of the 100 ka [eccentricity] climate cycle. Contrasting our results from single- and joint-nuclide depth profile models reveals a significant discrepancy between calculated and effective 10 Be and 26 Al production rates [40–65% of expected values]. We interpret this discrepancy as the result of intermittent loess cover—with a time-averaged depth between 60 and 110 cm—which significantly reduced apparent exposure ages obtained from the single–nuclide model. The observation of such a significant loess-cover effect on cosmogenic nuclide production has implications for exposure dating in glacial and periglacial environments; a multi-nuclide sampling strategy is required to quantify this effect.

54 ENVIRONMENTAL SCIENCES↗

Approximate DFT-based methods for generating diabatic states and calculating electronic couplings: models of two and more states

Four types of density functional theory (DFT)-based approaches are assessed in this work for the approximate construction of diabatic states and the evaluation of electronic couplings between these states. These approaches include the constrained DFT (CDFT) method, the constrained noninteracting electron (CNE) model to post-process Kohn–Sham operators, the approximate block-diagonalization (BD) of the Kohn–Sham operators, and the generalized Mulliken–Hush method. It is shown that the first three approaches provide a good description for long-distance intermolecular electron transfer (ET) reactions. On the other hand, inconsistent results were found when applying these approaches to intramolecular ET in strongly coupled, mixed-valence systems. Model analysis shows that this discrepancy is caused by the inappropriate use of the two-state model rather than the defects of the approaches themselves. The situation is much improved when more states are included in the model electronic Hamiltonian. The CNE and BD approaches can thus serve as efficient and robust alternatives for building ET models based on DFT calculations.

Yang, Chou-Hsun↗

Calculation of laser induced impulse based on the laser supported detonation wave model with dissociation, ionization and radiation

In the laser intensity range that the laser supported detonation (LSD) wave can be maintained, dissociation, ionization and radiation take a substantial part of the incidence laser energy. There is little treatment on the phenomenon in the existing models, which brings obvious discrepancies between their predictions and the experiment results. Taking into account the impact of dissociation, ionization and radiation in the conservations of mass, momentum and energy, a modified LSD wave model is developed which fits the experimental data more effectively rather than the existing models. Taking into consideration the pressure decay of the normal and the radial rarefaction, the laser induced impulse that is delivered to the target surface is calculated in the air; and the dependencies of impulse performance on laser intensity, pulse width, ambient pressure and spot size are indicated. The results confirm that the dissociation is the pivotal factor of the appearance of the momentum coupling coefficient extremum. This study focuses on a more thorough understanding of LSD and the interaction between laser and matter.

74 ATOMIC AND MOLECULAR PHYSICS↗

WIYN open cluster study. LXII. Comparison of isochrone systems using deep multi-band photometry of M35

The current generation of stellar isochrone models exhibits non-negligible discrepancies due to variations in the input physics. The success of each model is determined by how well it fits the observations, and this paper aims to disentangle contributions from the various physical inputs. New deep, wide-field optical and near-infrared photometry (UBVRIJHK{sub S} ) of the cluster M35 is presented, against which several isochrone systems are compared: Padova, PARSEC, Dartmouth, and Y {sup 2}. Two different atmosphere models are applied to each isochrone: ATLAS9 and BT-Settl. For any isochrone set and atmosphere model, observed data are accurately reproduced for all stars more massive than 0.7 M {sub ☉}. For stars less massive than 0.7 M {sub ☉}, Padova and PARSEC isochrones consistently produce higher temperatures than observed. Dartmouth and Y{sup 2} isochrones with BT-Settl atmospheres reproduce optical data accurately; however, they appear too blue in IR colors. It is speculated that molecular contributions to stellar spectra in the near-infrared may not be fully explored, and that future study may reconcile these differences.

79 ASTRONOMY AND ASTROPHYSICS↗

An adaptive knowledge-based data-driven approach for turbulence modeling using ensemble learning technique under complex flow configuration: 3D PWR sub-channel with DNS data

This work describes a new approach to increase the accuracy of Reynolds-averaged Navier–Stokes (RANS) in modeling turbulence flow leveraging the machine learning technique. Traditionally, different turbulence models for Reynolds stress are developed for different flow patterns based on human knowledge. Each turbulence model has a certain application domain and prediction uncertainty. In recent years, with the rapid improvements of machine learning techniques, researchers start to develop an approach to compensate for the prediction discrepancy of traditional turbulence models with statistical models and data. However, the approach has deficiencies in several aspects. For example, the amount of human knowledge introduced to the statistical model couldn’t be controlled, which makes the statistical model learn from a very naïve stage and limits its application. In this work, a new approach is developed to address those deficiencies. Here, the new approach uses the “ensemble learning” technique to control the amount of human knowledge introduced into the statistical model. Therefore, the new approach could be adaptive to the multiple application domains. In conclusion, according to the results of case study, the new approach shows higher accuracy than both traditional turbulence models and the previous machine learning approach.

42 ENGINEERING↗

Dark Energy Survey Year 1 Results: Cosmological constraints from cluster abundances and weak lensing

In this work we perform a joint analysis of the counts and weak lensing signal of redMaPPer clusters selected from the Dark Energy Survey (DES) Year 1 dataset. Our analysis uses the same shear and source photometric redshifts estimates as were used in the DES combined probes analysis. Our analysis results in surprisingly low values for $S_8 =\sigma_8(\Omega_{\rm m}/0.3)^{0.5}= 0.65\pm 0.04$, driven by a low matter density parameter, $\Omega_{\rm m}=0.179^{+0.031}_{-0.038}$, with $\sigma_8-\Omega_{\rm m}$ posteriors in $2.4\sigma$ tension with the DES Y1 3x2pt results, and in $5.6\sigma$ with the Planck CMB analysis. These results include the impact of post-unblinding changes to the analysis, which did not improve the level of consistency with other data sets compared to the results obtained at the unblinding. The fact that multiple cosmological probes (supernovae, baryon acoustic oscillations, cosmic shear, galaxy clustering and CMB anisotropies), and other galaxy cluster analyses all favor significantly higher matter densities suggests the presence of systematic errors in the data or an incomplete modeling of the relevant physics. Cross checks with X-ray and microwave data, as well as independent constraints on the observable--mass relation from SZ selected clusters, suggest that the discrepancy resides in our modeling of the weak lensing signal rather than the cluster abundance. Repeating our analysis using a higher richness threshold ($\lambda \ge 30$) significantly reduces the tension with other probes, and points to one or more richness-dependent effects not captured by our model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evaluation of experimentally measured and model-calculated pH for rock-brine-CO2 systems under geologic CO2 sequestration conditions

pH is an essential parameter for understanding the geochemical reactions that occur in rock-brine-CO2 systems when CO2 is injected into deep geologic formations for long-term storage. Due to a lack of reliable experimental methods, most laboratory studies conducted under geological CO2 sequestration (GCS) conditions have relied on thermodynamic modeling to estimate pH. The accuracy of these model predictions is typically uncertain. In our previous work, we have developed a method for pH determination by in-situ spectrophotometry. In the present work, we expanded the applicable pH range for this method and measured the pH of several rock-brine-CO2 systems at GCS conditions for five rock samples collected from ongoing GCS demonstration projects. Experimental measurements were compared with pH values calculated using several geochemical modeling approaches. The effect of different thermodynamic databases on the accuracy of model prediction was evaluated. Results indicate that the accuracy of model calculations is rock-dependent. For rocks comprised of carbonate and sandstone, model results generally agreed well with experimentally measured pH; however, for basalt, significant differences were observed. These discrepancies may be due to the models’ failure to fully account for certain reaction occurring between the basalt minerals the CO2-saturated brine solutions.

pH, carbon sequestration↗

Learning heterogeneous reaction kinetics from X-ray videos pixel by pixel

Reaction rates at spatially heterogeneous, unstable interfaces are notoriously difficult to quantify, yet are essential in engineering many chemical systems, such as batteries and electrocatalysts. Experimental characterizations of such materials by operando microscopy produce rich image datasets, but data-driven methods to learn physics from these images are still lacking because of the complex coupling of reaction kinetics, surface chemistry and phase separation. Here we show that heterogeneous reaction kinetics can be learned from in situ scanning transmission X-ray microscopy (STXM) images of carbon-coated lithium iron phosphate (LFP) nanoparticles. Combining a large dataset of STXM images with a thermodynamically consistent electrochemical phase-field model, partial differential equation (PDE)-constrained optimization and uncertainty quantification, we extract the free-energy landscape and reaction kinetics and verify their consistency with theoretical models. We also simultaneously learn the spatial heterogeneity of the reaction rate, which closely matches the carbon-coating thickness profiles obtained through Auger electron microscopy (AEM). Across 180,000 image pixels, the mean discrepancy with the learned model is remarkably small (<7%) and comparable with experimental noise. Our results open the possibility of learning nonequilibrium material properties beyond the reach of traditional experimental methods and offer a new non-destructive technique for characterizing and optimizing heterogeneous reactive surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fundamental aspects of deuterium retention in tungsten at high flux plasma exposure

An effect of enhanced trapping of deuterium in tungsten at high flux was discovered. It was shown analytically and confirmed experimentally that the deuterium trapping in a presence of high density of defects in tungsten (W) depends on the ion energy and ion flux. Newly developed analytical model explains experimentally observed discrepancy of deuterium trapping at radiation-induced defects in tungsten at different ion fluxes that significantly improves a prediction of hydrogen isotope accumulation in different plasma devices, including ITER and DEMO. The developed model can be used for many system of hydrogen in a metal in both normal and extreme environments (high fluxes, elevated temperatures, neutron irradiation, etc.). This new model allows, for the first time, to validate density function theory (DFT) predictions of multiple occupation of a defect with deuterium against experimental data that bridge the gap in length and time scale between DFT calculations and experiments. By comparing first-principle calculations based on DFT and semi-empirical “adsorption model,” it was proved that the mechanism of hydrogen isotope trapping in a vacancy cluster is similar to a chemisorption on a surface. Binding energies of deuterium with different types of defects in W were defined. Moreover, the surface barrier of deuterium to be chemisorbed on a clean W surface was found to be less than 1 eV and kinetics of deuterium release is limited by de-trapping from defects rather than to be limited by surface effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Learning heterogeneous reaction kinetics from X-ray movies pixel-by-pixel

Reaction rates at spatially heterogeneous, unstable interfaces are notoriously difficult to quantify, yet are essential in engineering many chemical systems, such as batteries 1 and electrocatalysts 2. Experimental characterizations of such materials by operando microscopy produce rich image datasets 3–6, but data-driven methods to learn physics from these images are still lacking because of the complex coupling of reaction kinetics, surface chemistry and phase separation 7. Here we show that heterogeneous reaction kinetics can be learned from in situ scanning transmission X-ray microscopy (STXM) images of carbon-coated lithium iron phosphate (LFP) nanoparticles. Combining a large dataset of STXM images with a thermodynamically consistent electrochemical phase-field model, partial differential equation (PDE)-constrained optimization and uncertainty quantification, we extract the free-energy landscape and reaction kinetics and verify their consistency with theoretical models. We also simultaneously learn the spatial heterogeneity of the reaction rate, which closely matches the carbon-coating thickness profiles obtained through Auger electron microscopy (AEM). Across 180,000 image pixels, the mean discrepancy with the learned model is remarkably small (<7%) and comparable with experimental noise. Our results open the possibility of learning nonequilibrium material properties beyond the reach of traditional experimental methods and offer a new non-destructive technique for characterizing and optimizing heterogeneous reactive surfaces.

Chueh, William↗

Resolving discrepancies in bang-time predictions for indirect-drive ICF experiments on the NIF: Insights from the Build-A-Hohlraum campaign

This study investigated discrepancies between measured and simulated x-ray drive in Indirect-Drive Inertial Confinement Fusion (ID-ICF) hohlraums at the National Ignition Facility. Despite advances in radiation-hydrodynamic simulations, a consistent “drive deficit” remains. Experimentally measured ID-ICF capsule bang-times are systematically 400–700 ps later than simulations predict. The Build-A-Hohlraum (BAH) campaign explored potential causes for this discrepancy by systematically varying hohlraum features, including laser entrance hole (LEH) windows, capsules, and gas fills. Overall, the agreement between simulated and experimental x-ray drive was found to be largely unaffected by these changes. The data allow us to exclude some hypotheses put forward to potentially explain the discrepancy. Errors in the local thermodynamic equilibrium (LTE) atomic modeling, errors in the modeling of LEH closure, and errors due to a lack of plasma species mix physics in simulations are shown to be inconsistent with our measurements. Instead, the data support the hypothesis that errors in NLTE emission modeling are a significant contributor to the discrepancy. X-ray emission in the 2–4 keV range is found to be approximately 30% lower than in simulations. This is accompanied by higher than predicted electron temperatures in the gold bubble region, pointing to errors in non-LTE modeling. Introducing an opacity multiplier of 0.87 on energy groups above 1.8 keV improves agreement with experimental data, reducing the bang-time discrepancy from 300 to 100 ps. These results underscore the need for refined NLTE opacity models to enhance the predictive power of hohlraum simulations.

Band emission↗

Prediction of transport in the JET DTE2 discharges with TGLF and NEO models using the TGYRO transport code

Abstract The JET Deuterium-Tritium-Experiment Campaign 2 (DTE2) has demonstrated the highest-ever fusion energy production. To forecast the transport dynamics within these discharges, the TGLF and NEO models within the TGYRO transport code were employed. A critical development in this study is the new quasilinear transport model, TGLF-SAT2, specifically designed to resolve discrepancies identified in JET deuterium discharges. This model accurately describes the saturated three-dimensional (3D) fluctuation spectrum, aligning closely with a database of nonlinear CGYRO turbulence simulations, thereby enhancing the predictive accuracy of TGYRO simulations. In validating against the JET DTE2 discharges across two primary operating scenarios, TGYRO effectively predicted the temperature profiles within a broad radial window ( ρ ∼ 0.2–0.85), though with minor ion temperature discrepancies near the core. However, a consistent underprediction of electron density profiles by 20% across the simulation domain was noted, indicating areas for future refinement. To achieve a self-consistent steady-state solution based on the JET DTE2 discharges, an integrated modeling workflow TGYRO-STEP within the OMFIT framework was introduced. This workflow iterates among the core transport, the pedestal pressure and the MHD equilibrium, ultimately yielding a converged solution that significantly reduces dependence on experimental boundary conditions for temperature and density profiles. The integrated simulation results show negligible differences in electron density and temperature profiles compared to standalone TGYRO modeling, while the ion temperature profile is lower due to the updated boundary condition in TGYRO-STEP. The application of the TGYRO-STEP workflow to JET DTE2 discharges serves as a crucial test to validate its robustness and highlights its limitations, providing valuable insights for its potential future application in ITER and Fusion Power Plant deuterium and tritium prediction modeling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

STAR FORMATION IN THE CHANDRA DEEP FIELD SOUTH: OBSERVATIONS CONFRONT SIMULATIONS

We investigate the star formation history of the universe using FIREWORKS, a multiwavelength survey of the Chandra Deep Field South. We study the evolution of the specific star formation rate (sSFR) with redshift in different mass bins from z = 0 to z approx 3. We find that the sSFR increases with redshift for all masses. The logarithmic increase of the sSFR with redshift is nearly independent of mass, but this cannot yet be verified at the lowest-mass bins at z>0.8, due to incompleteness. We convert the sSFRs to a dimensionless growth rate to facilitate a comparison with a semianalytic galaxy formation model that was implemented on the Millennium Simulation. The model predicts that the growth rates and sSFRs increase similarly with redshift for all masses, consistent with the observations. However, we find that for all masses, the inferred observed growth rates increase more rapidly with redshift than the model predictions. We discuss several possible causes for this discrepancy, ranging from field-to-field variance, conversions to SFR, and shape of the initial mass function. We find that none of these can solve the discrepancy completely. We conclude that the models need to be adapted to produce the steep increase in growth rate between redshift z = 0 and z = 1.

79 ASTRONOMY AND ASTROPHYSICS↗