Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Tracking Soiling Losses: Assessment, Uncertainty, and Challenges in Mapping

Several models have been presented in the recent years to estimate the magnitude of soiling from environmental parameters. However, these models are often based on data from a single site, or at most a few sites, and only limited data are, as of yet, available on their uncertainty. The present work aims to present a first comparative analysis of soiling estimation models, using measured soiling data from various locations in the USA. The study also investigates the impact that the source of the input data can have on the estimation. The results show that the model selection is only one of the factors that can affect the evaluation. Indeed, the use of satellite-derived or ground-mounted particulate matter data can lead to the generation of different soiling maps, with factors greater than 2x between the modeled losses. The current challenges and the unanswered questions that can bias soiling estimation are discussed. Additionally, potential research directions to improve the quality of soiling modeling are identified.

14 SOLAR ENERGY↗

Coordinated Model Predictive Control on Multi-Lane Roads

There are significant economic, environmental, energy, and other societal costs incurred by the road transportation sector. With the advent and penetration of connected and autonomous vehicles there are vast opportunities to optimize the control of individual vehicles for reducing energy consumption and increasing traffic flow. Model predictive control is a useful tool to achieve such goals, while accommodating ego-centric objectives typical of heterogeneous traffic and explicitly enforcing collision and other constraints. In this paper, we describe a multi-agent distributed maneuver planning and lane selection model predictive controller that includes an information sharing and coordination scheme. The energy saving potential of the proposed coordination scheme is then evaluated via large scale microscopic traffic simulations considering different penetration levels of connected and automated vehicles.

Goulet, Nathan↗

Constitutive model fingerprints in medium-amplitude oscillatory shear

Rheologists have expectations for signatures of linear viscoelastic properties, such as shapes of G'(ω) and G"(ω). Medium amplitude (or asymptotically-nonlinear) oscillatory shear (MAOS) provides additional nonlinear rheological information with low dimensional, well-defined material functions. Here, we develop expectations of signatures (or fingerprints) for the four asymptotically-nonlinear material functions associated with MAOS, [e 1 ](ω), [e 3 ](ω), [v 1 ](ω), [v 3 ](ω). Although the linear fingerprints may be identical for different models, the asymptotically-nonlinear fingerprints may be different in magnitude, frequency-scaling, curve shapes, and sign changes. To perform the analysis, we collect/translate a library of available analytical strain-controlled MAOS fingerprints for seven different constitutive models. Using this library, we identify general trends and highlight key differences of asymptotic-nonlinear viscoelasticity. Asymptotic nonlinearities for all models considered here obey the terminal regime inter-relations and frequency scaling predicted by Bharadwaj and Ewoldt. Unlike the positive linear viscoelastic measures, at least one of the four asymptotic nonlinearities changes signs with Deborah number (De). Following sign interpretations of Ewoldt and Bharadwaj, we show that nonlinearities tend to be driven by strain-rates at small De, and by strains at large De, a trend observed for nearly all the constitutive models studied here, the exception being the model for dilute rigid dumbbell suspensions. Some constitutive models exhibit multiple sign changes at intermediate De and there may be no universal behavior of asymptotically-nonlinear fingerprints in this regime. Therefore, frequency-dependent signatures can be material-specific. Furthermore, this will allow inverse problems to infer structure, select models, and fit model parameters using asymptotically-nonlinear signatures. To illustrate this aspect, we demonstrate a fingerprint matching exercise with experimental measurements on a transiently cross-linked hydrogel system. We find that currently available model fingerprints can match the qualitative magnitudes and frequency dependence, but not the signs of the experimental transient network response.

42 ENGINEERING↗

Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products, Part 3: LED Environmental Testing

This report covers the third part of a larger U.S. Department of Energy (DOE) project to assess the life- cycle environmental and resource impacts associated with the manufacturing, transport, use, and disposal of light-emitting diode (LED) lighting products in relation to incumbent lighting technologies. All three reports are available on the DOE website (www.ssl.energy.gov/tech_reports.html). Part 1: Review of the Life-Cycle Energy Consumption of Incandescent, Compact Fluorescent and LED Lamps; Part 2: LED Manufacturing and Performance; Part 3: LED Environmental Testing. Parts 1 and 2 were published in February and June 2012, respectively. The Part 1 report included a summary of the life-cycle assessment (LCA) process and methodology, provided a literature review of more than 25 existing LCA studies of various lamp types, and performed a meta-analysis comparing LED lamps with incandescent and compact fluorescent lamps (CFLs). Drawing from the Part 1 findings, Part 2 performed a more detailed assessment of the LED manufacturing process and used these findings to provide a comparative LCA taking into consideration a wider range of environmental impacts. Both reports concluded that the life-cycle environmental impact of a given lamp is dominated by the energy used during lamp operation—the upstream generation of electricity drives the total environmental footprint of the product. However, a more detailed understanding of end-of-life disposal considerations for LED products has become increasingly important as their installation base has grown. The Part 3 study (reported herein) was undertaken to augment the LCA findings with chemical analysis of a variety of LED, CFL, and incandescent lamps using standard testing procedures. A total of 22 samples, representing 11 different models, were tested to determine whether any of 17 elements were present at levels exceeding California or Federal regulatory thresholds for hazardous waste. Notably, this type of testing does not provide an indication of product safety during use. Key findings include: • The selected models were generally found to be below thresholds for Federally regulated elements, although volatile mercury in the CFLs is presumed to have escaped detection; • Nearly all of the lamps (regardless of technology) exceeded at least one California threshold— typically for copper, zinc, antimony, or nickel; • The greatest contributors were the metal screw bases, drivers, ballasts, and wires or filaments— internal LED light sources generally did not cause LED lamps to exceed thresholds. This study was exploratory in nature and was not intended to provide a definitive indication of regulatory compliance for any specific lamp model or technology. Further study would be needed to more broadly characterize the various light source technologies; to more accurately and precisely characterize a specific model; or to determine whether product redesign would be appropriate. However, concentrations of regulated elements in LED lamps were found to be comparable to cell phones and other types of electronic devices, which like incandescent lamps and CFLs have also have been shown to exceed the stringent California thresholds for hazardous waste. Although LED lamps offer reduced life-cycle energy and environmental impacts when compared to CFLs and incandescent lamps, recycling will likely gain importance as consumer adoption of this emerging technology continues to increase.

bulb↗

Simultaneous “Clean-and-Repair” of Surfaces Using Smart Droplets

An autonomous self-healing system, inspired by transportation processes inherent to biology, is described for materials transportation and repair. The selected model system combines inorganic nanoparticles (NPs) on damaged substrates with functional emulsion droplets that pick up the particles from pristine portions of the substrate and deposit them into damaged regions. The droplets are stabilized by polymer surfactants containing phosphorylcholine groups, a polymer composition selected to impart surfactant properties for droplet stabilization as well as fouling resistance to prevent irreversible droplet adsorption on the substrates. Both the NP pickup (cleaning) and drop off (repair) steps are conducted in a system driven by an imposed flow and characterized by fluorescence microscopy. To evaluate and optimize the efficiency of this NP transportation process, the effect of both the chemical composition of the polymer surfactant and the NP surface chemistry is investigated in this work. Interfacial interactions proved enabling for these NP transportation processes, specifically those involving NP/droplet, NP/substrate, and droplet/substrate interactions. Ultimately, droplets capable of both picking up and dropping off NPs are realized by adjusting fluid/fluid and fluid/substrate interactions, with electrostatic interactions between NPs and droplets proving most effective.

36 MATERIALS SCIENCE↗

Water Temperature, Prey Concentration and Salmonid Density Influence Daily Growth of Wild Juvenile Salmonids in Tributaries of the Upper Salmon River, Idaho ( USA )

ABSTRACT Theory, experiments and field studies indicate that the somatic growth rate of freshwater consumers is shaped by the individual, additive and multiplicative effects of multiple factors, including consumer size and condition, temperature, prey resources and biotic interactions. While our understanding of how these factors affect wild populations of freshwater consumers is improving, the topic remains poorly studied, especially with respect to mobile species. Here, we report on an 8‐year, seven‐stream ( n = 49 stream‐year combinations) observational study examining the individual and interactive effects of invertebrate prey concentration (F, mg/m 3 ), mean daily water temperature (T, °C) and juvenile Chinook salmon ( Oncorhynchus tshawytscha ) density (D, fish/100 m 2 ) on summer daily growth rates (%/d) of mobile, anadromous, juvenile Chinook salmon (age‐0+, n = 382) and sub‐yearling (age‐0+, n = 61) and yearling (age‐1+) steelhead trout ( O. mykiss , n = 70) rearing in cold (mean daily summer: 12.1°C, range: 4.2°C–16.7°C) mountain tributaries of the Salmon River basin in central Idaho (USA). AIC c model selection indicated that daily juvenile salmonid growth positively correlated with water temperature, prey biomass concentration, local juvenile Chinook density and the interaction between water temperature and food but with species and age‐specific differences. Water temperature was a covariate in all top‐ranked models, with daily growth (%/day) rate increasing (0.05%–0.23%/d) linearly with mean daily summer water temperature. In addition to a direct positive relationship with daily growth rate, there was evidence that prey concentration positively interacted with water temperature to accelerate daily growth (F × T). The positive relationship between juvenile salmonid daily growth rate and juvenile Chinook density is difficult to explain and could result from confounding factors. The individual success observed in these streams may contribute to population‐level benefits for the focal consumers, as prey‐rich, warm summers may result in larger individuals with higher energy reserves at the end of the summer/autumn growing season, contributing to improved overwinter survival. Our results, taken in combination with evidence from models, experiments and observational studies, have climate change implications. Current and predicted increases in water temperature will necessitate higher rates of prey consumption by aquatic ectothermic consumers to offset accelerated metabolic demands. Thus, to improve the resilience of mobile freshwater consumers in a warming climate, we suggest that natural resource managers not only consider physical and chemical habitat conditions but also biotic conditions, including the spatiotemporal quantity and quality of prey resources.

Kiffney, Peter. M. [Fish Ecology, Northwest Fisher↗

Rock Valley Direct Comparison Relocation Working Group Location Results and Recommendations

Work accomplished: Collected and compared historic data for the 1993 Rock Valley earthquake sequence; Compared preliminary and prior location work from different location algorithms, phase pick sets, station constellations, and velocity models; Selected a common set of stations that could be used across all location methods for consistency; Reviewed 8 different sets of phase picks and converged on a single, reviewed set of picks for all common stations; Evaluated four pre-existing regional velocity models and incorporated new and preliminary results for five new velocity models that provide information on the very shallow (< 2km) structure near station RTPP; Compared location results from different methods while using the common sets of picks, stations, and velocity models

58 GEOSCIENCES↗

Evaluating the Community Land Model in a pine stand with shading manipulations and 13 CO 2 labeling

Carbon partitioning and flow through ecosystems regulates land surface atmosphere CO 2 exchange and thus is a key, albeit uncertain component of mechanistic models. The Partitioning in Trees and Soil (PiTS) experiment-model project tracked C partitioning through a young Pinus taeda stand following pulse-labeling with 13 CO 2 and two levels of shading. The field component of this project provided process-oriented data that was used to evaluate and improve terrestrial biosphere model simulations of rapid shifts in carbon partitioning and hydrological dynamics under varying environmental conditions. Here we tested the performance of the Community Land Model version 4 (CLM4) in capturing short-term carbon and water dynamics in relation to manipulative shading treatments, and the timing and magnitude of carbon fluxes through various compartments of the ecosystem. To constrain CLM4 to closely simulate pretreatment conditions, we calibrated select model parameters with the pretreatment observational data. Compared to CLM4 simulations with default parameters, CLM4 with calibrated model parameters was better able to simulate pretreatment vegetation carbon pools, light response curves, and other initial states and fluxes of carbon and water. Over a 3-week treatment period, the calibrated CLM4 generally reproduced the impacts of shading on average soil moisture at 15-95 cm depth, transpiration, relative change in stem carbon, and soil CO 2 efflux rate, although some discrepancies in the estimation of magnitudes and temporal evolutions existed. CLM4, however, was not able to track the progression of the 13 CO 2 label from the atmosphere through foliage, phloem, roots or surface soil CO 2 efflux, even when optimized model parameters were used. This model bias arises, in part, from the lack of a short-term non-structural carbohydrate storage pool and progressive timing of within-plant transport, thus indicating a need for future work to improve the allocation routines in CLM4. Overall, these types of detailed evaluations of CLM4, paired with intensive field manipulations, can help to identify model strengths and weaknesses, model uncertainties, and additional observations necessary for future model development.

54 ENVIRONMENTAL SCIENCES↗

DEVELOPING ATMOSPHERIC RETRIEVAL METHODS FOR DIRECT IMAGING SPECTROSCOPY OF GAS GIANTS IN REFLECTED LIGHT. I. METHANE ABUNDANCES AND BASIC CLOUD PROPERTIES

Upcoming space-based coronagraphic instruments in the next decade will perform reflected light spectroscopy and photometry of cool directly imaged extrasolar giant planets. We are developing a new atmospheric retrieval methodology to help assess the science return and inform the instrument design for such future missions, and ultimately interpret the resulting observations. Our retrieval technique employs a geometric albedo model coupled with both a Markov chain Monte Carlo Ensemble Sampler ( emcee ) and a multimodal nested sampling algorithm ( MultiNest ) to map the posterior distribution. This combination makes the global evidence calculation more robust for any given model and highlights possible discrepancies in the likelihood maps. As a proof of concept, our current atmospheric model contains one or two cloud layers, methane as a major absorber, and a H{sub 2}–He background gas. This 6-to-9 parameter model is appropriate for Jupiter-like planets and can be easily expanded in the future. In addition to deriving the marginal likelihood distribution and confidence intervals for the model parameters, we perform model selection to determine the significance of methane and cloud detection as a function of expected signal-to-noise ratio in the presence of spectral noise correlations. After internal validation, the method is applied to realistic spectra of Jupiter, Saturn, and HD 99492c, a model observing target. We find that the presence or absence of clouds and methane can be determined with high confidence, while parameter uncertainties are model dependent and correlated. Such general methods will also be applicable to the interpretation of direct imaging spectra of cloudy terrestrial planets.

79 ASTRONOMY AND ASTROPHYSICS↗

Simultaneous calibration of surface flow and baseflow simulations: a revisit of the SWAT model calibration framework

Accurate analysis of water flow pathways from rainfall to streams is critical for simulating water use, climate change impact, and contaminants transport. In this study, we developed a new scheme to simultaneously calibrate surface flow (SF) and baseflow (BF) simulations of soil and water assessment tool (SWAT) by combing evolutionary multi-objective optimization (EMO) and BF separation techniques. The application of this scheme demonstrated pronounced trade-off of SWAT’s performance on SF and BF simulations. The simulated major water fluxes and storages variables (e.g. soil moisture, evapotranspiration, and groundwater) using the multiple parameters from EMO span wide ranges. Uncertainty analysis was conducted by Bayesian model averaging of the Pareto optimal solutions. The 90% confidence interval (CI) estimated using all streamflows substantially overestimate the uncertainty of low flows on BF days while underestimating the uncertainty of high flows on SF days. Despite using statistical criteria calculated based on streamflow for model selection, it is important to conduct diagnostic analysis of the agreement of SWAT behaviour and actual watershed dynamics. The new calibration technique can serve as a useful tool to explore the tradeoff between SF and BF simulations and provide candidates for further diagnostic assessment and model identification.

54 ENVIRONMENTAL SCIENCES↗

Sparsifying priors for Bayesian uncertainty quantification in model discovery

We propose a probabilistic model discovery method for identifying ordinary differential equations governing the dynamics of observed multivariate data. Our method is based on the sparse identification of nonlinear dynamics (SINDy) framework, where models are expressed as sparse linear combinations of pre-specified candidate functions. Promoting parsimony through sparsity leads to interpretable models that generalize to unknown data. Instead of targeting point estimates of the SINDy coefficients, we estimate these coefficients via sparse Bayesian inference. The resulting method, uncertainty quantification SINDy (UQ-SINDy), quantifies not only the uncertainty in the values of the SINDy coefficients due to observation errors and limited data, but also the probability of inclusion of each candidate function in the linear combination. UQ-SINDy promotes robustness against observation noise and limited data, interpretability (in terms of model selection and inclusion probabilities) and generalization capacity for out-of-sample forecast. Sparse inference for UQ-SINDy employs Markov chain Monte Carlo, and we explore two sparsifying priors: the spike and slab prior, and the regularized horseshoe prior. UQ-SINDy is shown to discover accurate models in the presence of noise and with orders-of-magnitude less data than current model discovery methods, thus providing a transformative method for real-world applications which have limited data.

97 MATHEMATICS AND COMPUTING↗

Cosmic string parameter constraints and model analysis using small scale Cosmic Microwave Background data

We present a significant update of the constraints on the Abelian Higgs cosmic string tension by cosmic microwave background (CMB) data, enabled both by the use of new high-resolution CMB data from suborbital experiments as well as the latest results of the WMAP satellite, and by improved predictions for the impact of Abelian Higgs cosmic strings on the CMB power spectra. The new cosmic string spectra [1] were improved especially for small angular scales, through the use of larger Abelian Higgs string simulations and careful extrapolation. If Abelian Higgs strings are present then we find improved bounds on their contribution to the CMB anisotropies, fd{sup AH} < 0.095, and on their tension, Gμ{sub AH} < 0.57 × 10{sup −6}, both at 95% confidence level using WMAP7 data; and fd{sup AH} < 0.048 and Gμ{sub AH} < 0.42 × 10{sup −6} using all the CMB data. We also find that using all the CMB data, a scale invariant initial perturbation spectrum, n{sub s} = 1, is now disfavoured at 2.4σ even if strings are present. A Bayesian model selection analysis no longer indicates a preference for strings.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparing cosmic web classifiers using information theory

We introduce a decision scheme for optimally choosing a classifier, which segments the cosmic web into different structure types (voids, sheets, filaments, and clusters). Our framework, based on information theory, accounts for the design aims of different classes of possible applications: (i) parameter inference, (ii) model selection, and (iii) prediction of new observations. As an illustration, we use cosmographic maps of web-types in the Sloan Digital Sky Survey to assess the relative performance of the classifiers T-WEB, DIVA and ORIGAMI for: (i) analyzing the morphology of the cosmic web, (ii) discriminating dark energy models, and (iii) predicting galaxy colors. Our study substantiates a data-supported connection between cosmic web analysis and information theory, and paves the path towards principled design of analysis procedures for the next generation of galaxy surveys. We have made the cosmic web maps, galaxy catalog, and analysis scripts used in this work publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗

Machine Learning-Based Identification of the Interface Regions for Coupling Local and Nonlocal Models

Local-nonlocal coupling approaches provide a means to combine the computational efficiency of local models and the accuracy of nonlocal models. However, the coupling process can be challenging, requiring expertise to identify the interface between local and nonlocal regions. Here, this study introduces a machine learning-based approach to automatically detect the regions in which the local and nonlocal models should be used. The method uses loading functions evaluated at grid points to decide the model selection at those points. Training of the networks is based on datasets provided by classes of loading functions for which reference coupling configurations are computed using accurate coupled solutions, where accuracy is measured in terms of the relative error between the solution to the coupling approach and the solution to the nonlocal model. We study two approaches that vary in data structure. The first, the full-domain input data approach, uses the entire load vector and outputs a complete label vector, performing a global classification. The second, a window-based approach, processes loads into windows and addresses the problem as a node-wise classification where each window's central point is classified individually. The classification problems are solved via deep learning algorithms based on convolutional neural networks. The performance of these approaches is studied on one-dimensional numerical examples using F1-scores and accuracy metrics. Notably, the windowing approach achieves an accuracy of 0.96 and an F1-score of 0.97, highlighting its potential to automate coupling processes effectively and enhance computational efficiency in material science applications.

97 MATHEMATICS AND COMPUTING↗

Eelgrass Enhancement and Restoration in the Lower Columbia River Estuary, Period of Performance: Feb 2008-Sep 2009.

The purpose of this study was to evaluate the ability to enhance distribution of eelgrass (Zostera marina) in the Columbia River Estuary to serve as refuge and feeding habitat for juvenile salmon, Dungeness crab, and other fish and wildlife. We strongly suspected that limited eelgrass seed dispersal has resulted in the present distribution of eelgrass meadows, and that there are other suitable places for eelgrass to survive and form functional meadows. Funded as part of the Bonneville Power Administration's call for Innovative Projects, we initiated a multistage study in 2008 that combined modeling, remote sensing, and field experimentation to: (1) Spatially predict habitat quality for eelgrass; (2) Conduct experimental plantings; and (3) Evaluate restoration potential. Baseline in-situ measurements and remote satellite observations were acquired for locations in the Lower Columbia River Estuary (LCRE) to determine ambient habitat conditions. These were used to create a habitat site-selection model, using data on salinity, temperature, current velocity, light availability, wave energy, and desiccation to predict the suitability of nearshore areas for eelgrass. Based on this model and observations in the field, five sites that contained no eelgrass but appeared to have suitable environmental conditions were transplanted with eelgrass in June 2008 to test the appropriateness of these sites for eelgrass growth. We returned one year after the initial planting to monitor the success rate of the transplants. During the year after transplanting, we carried out a concurrent study on crab distribution inside and outside eelgrass meadows to study crab usage of the habitat. One year after the initial transplant, two sites, one in Baker Bay and one in Young's Bay, had good survival or expansion rates with healthy eelgrass. Two sites had poor survival rates, and one site had a total loss of the transplanted eelgrass. For submerged aquatic vegetation (SAV) restoration projects, these are reasonable success results and represent a small net gain in eelgrass in the LCRE. Crabs used both the eelgrass and unvegetated substrate, though in neither were there great abundance of the young-of-the-year crabs. During the field assessment of 12 potential transplant sites, divers discovered one site in southern Young's Bay that contained a previously undocumented eelgrass bed. This integrated project developed the first predictive maps of sites suitable for eelgrass and other SAV in the lower estuary. In addition, techniques developed for this project to assess light levels in existing and potential submerged habitats have great potential to be used in other regions for nearshore and coastal monitoring of SAV. Based on these preliminary results, we conclude that eelgrass distribution could likely be expanded in the estuary, though additional information on current eelgrass locations, usage by species of interest, and monitoring of current conditions would help develop a baseline and verify benefit. Our recommendations for future studies include: (1) Site Monitoring. Continued monitoring of restoration sites along with physical metrics of light, temperature and salinity within beds. Continued monitoring will both assist managers in understanding the longevity and expansion rate of planted sites and inform practical guidance on the minimum planted eelgrass required to develop a resilient meadow. (2) Natural bed documentation and monitoring. Document current eelgrass habitat conditions in the Columbia River by mapping eelgrass and other SAV species and monitoring physical metrics in natural beds. This will assist by better defining the factors that control the annual and spatial variation in eelgrass in the estuary, and thus lead to improved management. Improved information on conditions will help refine a habitat suitability model that can more accurately predict where eelgrass can be restored or areas under duress. (3) Monitor Species Use. Expanded monitoring of Dungeness crab and salmon use and benefit from eelgrass in the estuary to evaluate how feeding and rearing functions of eelgrass benefit the survival and growth of these species. We have two final recommendations. First, if transplanting of eelgrass is to be expanded, donor stocks of plants should also be expanded to reduce the dependence on natural meadows. We recommend that an eelgrass culture facility be considered to supply stocks of eelgrass for planting that are developed from the eelgrass populations now in the estuary. Second, freshwater submerged aquatic vegetation (SAV) occurs in many parts of the estuary, and probably has importance to juvenile salmon (although this also needs verification). Restoration and expansion of freshwater SAV should be considered in a comprehensive effort to restore the submerged vegetation habitats through the Columbia River estuary.

13 HYDRO ENERGY↗

Inferring the Gibbs state of a small quantum system

Gibbs states are familiar from statistical mechanics, yet their use is not limited to that domain. For instance, they also feature in the maximum entropy reconstruction of quantum states from incomplete measurement data. Outside the macroscopic realm, however, estimating a Gibbs state is a nontrivial inference task, due to two complicating factors: the proper set of relevant observables might not be evident a priori; and whenever data are gathered from a small sample only, the best estimate for the Lagrange parameters is invariably affected by the experimenter's prior bias. I show how the two issues can be tackled with the help of Bayesian model selection and Bayesian interpolation, respectively, and illustrate the use of these Bayesian techniques with a number of simple examples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Importance of structural information in predicting human acute toxicity from in vitro cytotoxicity data

In this study, we tried to assess the utility of the structural information of drugs for predicting human acute toxicity from in vitro basal cytotoxicity, and to interpret the informative quality and the pharmacokinetic meaning of each structural descriptor. For this, human acute toxicity data of 67 drugs were taken from literature with their basal cytotoxicity data, and used to develop predictive models. A series of multiple linear regression analyses were performed to construct feasible regression models by combining molecular descriptors and cytotoxicity data. We found that although the molecular descriptors alone had only moderate correlation with human acute toxicity, they were highly useful for explaining the discrepancy between in vitro cytotoxicity and human acute toxicity. Among many possible models, we selected the most explanatory models by changing the number and the type of combined molecular descriptors. The results showed that our selected models had high predictive power (R{sup 2}: between 0.7 and 0.87). Our analysis indicated that those successful models increased the prediction accuracies by providing the information on human pharmacokinetic parameters which are the major reason for the difference between human acute toxicity and cytotoxicity. In addition, we performed a clustering analysis on selected molecular descriptors to assess their informative qualities. The results indicated that the number of single bonds, the number of hydrogen bond donors and valence connectivity indices are closely related to linking cytotoxicity to acute toxicity, which provides insightful explanation about human toxicity beyond cytotoxicity.

54 ENVIRONMENTAL SCIENCES↗

ATF material model development and validation for priority fuel concepts

Development, implementation, and validation of material and behavior models for accident tolerant fuel (ATF) concepts in the Bison fuel performance code began in 2014 in response to the events that occurred at the Fukushima Daichii nuclear power plant in March 2011. Early on the focus was on U 3 Si 2 fuel and FeCrAl cladding as part of a high impact problem through the Nuclear Energy and Advanced Modeling Simulation (NEAMS) program. Then, developments for Cr 2 O 3 -doped UO 2 fuel, and SiC-SiC and Cr-coated zirconium-based claddings began based upon industry interests. In late fiscal year 2018 the Consortium for Advanced Simulation of Light Water Reactors (CASL) took over further ATF work in Bison in support of the Nuclear Regulatory Commission (NRC) engagement. Discussions with the NRC identified their list of priority fuel and cladding concepts, which included Cr 2 O 3 -doped UO 2 and U 3 Si 2 fuels, and Cr-coated zirconium-based and FeCrAl claddings. In particular, the NRC suggested that reports similar in form to NUREG/CR-7024 [1] that was developed for traditional LWR materials UO 2 and zirconium-based claddings (i.e., Zircaloy-4, M5®, ZIRLO) be created for the priority ATF concepts. The approach to ATF capability development in Bison since the beginning has been two-fold: (1) empirical correlations and (2) multiscale model development. Both approaches have uncertainty inherent to them. Uncertainty in empirical correlations is bounded by the experimental data upon which with the correlation was developed. Models developed through a multiscale approach have uncertainty associated with the lower length scale calculations and input parameters that must be propagated to the engineering scale model in Bison. In this report, the recommended models, their range of applicability (e.g., temperature, burnup), and associated uncertainty for the NRC priority fuel concepts Cr 2 O 3 -doped UO 2 and U 3 Si 2 are presented in a manner similar to the aforementioned NUREG. In addition, the Cr 2 O 3 -doped UO 2 models are validated to the Halden Reactor tess IFA-677.1 rods 1 and 5 and IFA-716.1 rod 1. For U 3 Si 2 the models are validated to the recent post-irradiation examination (PIE) data ATF-13 and ATF-15 rods that were irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory. Finally, an uncertainty quantification (UQ) and sensitivity analysis (SA) is completed on a single rod for each fuel concept that takes into account the defined uncertainty in select models. The results of the UQ and SA analyses indicate that given the large uncertainty in some of the input ATF models that the uncertainty on the Bison predictions of fuel performance metrics of interest bound the available experimental data. Correlation coefficients are also reported that identified the uncertain inputs with the strongest correlation (positive or negative) with the outputs of interest. Fuel performance metrics investigated include fuel elongation, rod internal pressure, fuel centerline temperature, and fission gas release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗