Search NASA⌕ Search

SEARCH · Search NASA

Results for “ND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Chronology and petrogenesis of a 1.8 g lunar granitic clast:14321,1062

Geochronological, isotopic, and trace element data for a pristine granite clast from Apollo 14 breccia 14321 obtained using Rb-Sr, Sm-Nd, and (Ar-39)-(Ar-40) methods are presented. Trace element data for a possibly related evolved rock, the quartz-monodiorite clast from breccia 15404 are also presented, and the relationship between these two rock types is discussed. The concordancy of the Rb-Sr and Sm-Nd internal isochron ages and especially the Rb-Sr model age strongly suggest that the granite clast formed 4.1 AE ago. It probably crystallized slowly in the crust and was later excavated and brecciated about 3.88 AE ago, as indicated by the Ar-Ar age. A two-stage model involving crystal fractionation followed by silicate liquid immiscibility is proposed for the lunar granite genesis.

Shih, C.-Y.↗
NASA NTRS1986

Photovoltaic conversion of laser power to electrical power

Photovoltaic laser to electric converters are attractive for use with a space-based laser power station. This paper presents the results of modeling studies for a silicon vertical junction converter used with a Nd laser. A computer code was developed for the model and this code was used to conduct a parametric study for a Si vertical junction converter consisting of one p-n junction irradiated with a Nd laser. These calculations predict an efficiency over 50 percent for an optimized converter.

Walker, G. H.↗
NASA NTRS1986

Crystal/liquid partitioning of REE in basaltic systems Extreme fractionation of REE in olivine

The calculation of partial coefficients for Nd, Sm, Gd, and Yb between olivine and synthetic basaltic melts using the percent level doping technique and microprobe analytical techniques is examined. The experimental and analytical procedures are described. The relationship between rare earth elements (REEs) concentrations and crystal margins caused by Rees X-rays from surrounding glass is discussed. Average olivine/liquid distribution coefficients for Nd, Sm, Gd, and Yb for mare and highlands basaltic melts are presented. The data reveal that the distribution coefficients for light REEs are lower than those obtained in previous studies, and the slope of the olivine/liquid distribution coefficient pattern is steeper; potential sources of error in the previous and present studies which could explain the differences in distribution coefficients and slope are investigated.

Mckay, G. A.↗
NASA NTRS1985

Solid state laser technology - A NASA perspective

NASA's program for developing solid-state laser technology and applying it to the Space Shuttle and Space Platform is discussed. Solid-state lasers are required to fulfill the Earth Observation System's requirements. The role of the Office of Aeronautics and Space Technology in developing a NASA tunable solid-state laser program is described. The major goals of the program involve developing a solid-state pump laser in the green, using AlGaAs array technology, pumping a Nd:YAG/SLAB crystal or glass, and fabricating a lidar system, with either a CO2 laser at 10.6 microns or a Nd:YAG laser at 1.06 microns, to measure tropospheric winds to an accuracy of + or - 1 m/s and a vertical resolution of 1 km. The procedures to be followed in order to visualize this technology plan include: (1) material development and characterization, (2) laser development, and (3) implementation of the lasers.

Allario, F.↗
NASA NTRS1985

A solid state tunable laser for resonance measurements of atmospheric sodium

The measurement of wave dynamics in the upper mesosphere using a solid-state laser to excite the resonance fluorescence line of sodium is examined. Two Nd:YAG lasers are employed to produce the sodium resonance line. The method involves mixing the 1064 nm radiation with that from a second Nd:YAG operating at 1319 nm in a nonlinear infrared crystal to directly produce 589 nm radiation by sum frequency generation. The use of the transmitter to measure the sodium layer from the Space Shuttle Platform is proposed. A diagram of the laser transmitter is presented.

Philbrick, C. R.↗
NASA NTRS1986

Remote express analysis of ground-layer aerosol based on laser-induced spark spectra

The creation of high-power pulsed CO2 and Nd-glass lasers enables the realization of the method for remote spectro-chemical analysis of atmospheric aerosols based on excitation of the emission spectrum of the aerosol particle atoms. A description of construction and characteristics of a spectrochemical lidar based on both Nd-glass and CO2 lasers is presented.

Zuev, V. E.↗
NASA NTRS1986

Lidar detection of metallic species at the mesopause level

The measurement alkali species present in the atomic form at the mesopause level has been performed by lidar for more than ten years. Atomic and ionic calcium density profiles are obtained for 3 years by the same technique in the visible range, at 423 nm for atomic calcium, and 393 nm for ionic calcium Ca(+). The experimental set-up and the preliminary results have been presented elsewhere. The 423 nm wavelength is directly obtained by the emission of a dye laser pumped by the third harmonic of a Nd-YAG laser. For the generation of the 393 nm wavelength, frequency mixing was used: the emission at 624 nm of a dye laser pumped by the 2nd harmonic of a Nd-Yag laser is mixed with the fundamental infrared emission (remaining after frequency doubling), in a non-linear KDP crystal, which gives the 393 nm emission. The behavior of the two atomic species, calcium and sodium, which are in the same altitude range are compared. For 45% of the observations, no ionic calcium was detected: the ionic calcium abundance was thus below the detection threshold. Contrasting with the density profiles of the atomic species, sodium and calcium, the ionic calcium profile present important variations on small time scales. The main characteristics of theatomic and ionic calcium behaviors that can be deduced from the measurements made are given.

Granier, C.↗
NASA NTRS1986

Fatigue life of laser cut metals

Fatigue tests were conducted to determine the actual reduction in fatigue life due to weight removal for balancing by: hand grinding, low power (20 watt) Nd:glass laser, and high power (400 watt) Nd:YAG laser.

Martin, M. R.↗
NASA NTRS1987

Photovoltaic conversion of laser power to electrical power

Photovoltaic laser to electric converters are attractive for use with a space-based laser power station. The results of modeling studies for a silicon vertical junction converter used with a Nd laser are given. A computer code was developed for the model and this code was used to conduct a parametric study for a Si vertical junction converter consisting of one p-n junction irradiated with a Nd laser. These calculations predict an efficiency over 50 percent for an optimized converter.

Walker, Gilbert H.↗
NASA NTRS1987

Canopy reflectance, photosynthesis, and transpiration. II - The role of biophysics in the linearity of their interdependence

The ability of satellite sensor systems to estimate area-averaged canopy photosynthetic and transpirative properties is evaluated. The near linear relationship between the simple ratio (SR) and normalized difference (ND) and the surface biophysical properties of canopy photosynthetically active radiation (PAR) absorption, photosynthesis, and bulk stomatal resistance is studied. The models utilized to illustrate the processes of canopy reflectance, photosynthesis, and resistance are described. The dependence of SR, the absorbed fraction of PAR, and canopy photosynthesis and resistance on total leaf area index is analyzed. It is noted that the SR and ND vegetation indices and vegetation-dependent qualities are near-linearly related due to the proportion of leaf scattering coefficient in visible and near IR wavelength regions. The data reveal that satellite sensor systems are useful for the estimation of photosynthesis and transpirative properties.

Sellers, P. J.↗
NASA NTRS1987

The production of NH(A 3Pi i) through photodissociative excitation of NH3

The NH(A-X) emission produced by photodissociation of NH3 is examined using a line emission source in the 600-1340 A region. It is observed that the production of the NH(A 3Pi i) photofragment involves a spin-forbidden transition. Fluorescence spectra of NH3 are derived and analyzed. The relationship between fluorescence cross sections and fluorescence count rates and gas pressure is studied. The fluorescence cross sections of NH(A-X) are calculated as 2.1 x 10 to the -22nd, 3.1 x 10 to the -22nd, 3.0 x 10 to the -21st, 1.5 x 10 to the -20th, and 3.4 x 10 to the -20th sq cm for the primary photon wavelength of 1239, 1184, 1065, 1037, and 976 A, respectively; and the corresponding fluorescence quantum yields are 0.00002, 0.00003, 0.0012, 0.0085, and 0.015.

Wu, C. Y. Robert↗
NASA NTRS1988

Fatigue Lives Of Laser-Cut Metals

Fatigue lives made to approach those attainable by traditional grinding methods. Fatigue-test specimens prepared from four metallic alloys, and material removed from specimens by manual grinding, by Nd:glass laser, and by Nd:YAG laser. Results of fatigue tests of all specimens indicated reduction of fatigue strengths of laser-fired specimens. Laser machining holds promise for improved balancing of components of gas turbines.

Martin, Michael R.↗
NASA NTRS1987

Diode pumped solid-state laser oscillators for spectroscopic applications

The rapid improvement in diode laser pump sources has led to the recent progress in diode laser pumped solid state lasers. To date, electrical efficiencies of greater than 10 percent were demonstrated. As diode laser costs decrease with increased production volume, diode laser and diode laser array pumped solid state lasers will replace the traditional flashlamp pumped Nd:YAG laser sources. The use of laser diode array pumping of slab geometry lasers will allow efficient, high peak and average power solid state laser sources to be developed. Perhaps the greatest impact of diode laser pumped solid state lasers will be in spectroscopic applications of miniature, monolithic devices. Single-stripe diode-pumped operation of a continuous-wave 946 nm Nd:YAG laser with less than 10 m/w threshold was demonstrated. A slope efficiency of 16 percent near threshold was shown with a projected slope efficiency well above a threshold of 34 percent based on results under Rhodamine 6G dye-laser pumping. Nonlinear crystals for second-harmonic generation of this source were evaluated. The KNbO3 and periodically poled LiNbO3 appear to be the most promising.

Byer, R. L.↗
NASA NTRS1987

High energy efficient solid state laser sources

Investigations continue of diode-laser-pumped solid-state laser oscillators and nonlinear processes using them as sources. Diode laser array pumped Nd:YAG and Nd:glass lasers have been demonstrated. Theoretical studies of non-planar oscillators have been advanced, producing new designs which should be more resistant to feedback and offer better frequency stability. A monolithic, singly resonant Optical Parametric Oscillator in MgO:LiNbO3 has been operated.

Byer, Robert L.↗
NASA NTRS1988

Three-dimensional models of conventional and vertical junction laser-photovoltaic energy converters

Three-dimensional models of both conventional planar junction and vertical junction photovoltaic energy converters have been constructed. The models are a set of linear partial differential equations and take into account many photoconverter design parameters. The model is applied to Si photoconverters; however, the model may be used with other semiconductors. When used with a Nd laser, the conversion efficiency of the Si vertical junction photoconverter is 47 percent, whereas the efficiency for the conventional planar Si photoconverter is only 17 percent. A parametric study of the Si vertical junction photoconverter is then done in order to describe the optimum converter for use with the 1.06-micron Nd laser. The efficiency of this optimized vertical junction converter is 44 percent at 1 kW/sq cm.

Heinbockel, John H.↗
NASA NTRS1988

Late-Archaean crustal growth in the Lewisian Complex of Northwest Scotland: Diachroneity in magmatic accretion and implications for models of crustal growth

The Lewisian Complex of northwestern Scotland is an Archaean basement terrain that was reworked during the Proterozoic. Previous geochronological studies have established that the complex represents an entirely new crustal addition during late-Archaean times, and the difference between a Sm-Nd accretion date of 2920 + or - 50 Ma and a Pb/Pb metamorphic date of 2680 + or - 70 Ma was interpreted as indicating a crustal accretion-differentiation superevent (CADS) lasting 240 + or - 110 Ma. A combined Rb-Sr, Pb/Pb, and Sm-Nd isotopic study reported was applied to the Lewisian CADS to attempt to address the problem of whether this comprised a short regional scale magmatic accretion event followed approximately 200 Ma later by regional high-grade metamorphism, or a long period of episodic or semi-continuous magmatic accretion prior to high-grade metamorphism.

Whitehouse, M. J.↗
NASA NTRS1987

Isotopic analysis of basaltic fragments from lunar breccia 14321 - Chronology and petrogenesis of pre-Imbrium mare volcanism

Internal (mineral) Rb-Sr isochrons were determined for six Apollo 14 mare basalts of lunar breccia 14321. The ages of these fragments, which represent the time of crystallization of the respective mafic lavas, range from about 4.05 to 4.24, and, possibly, to 4.33 Ga and are among the oldest dates reported for mare basalts. For three of the fragments, internal Sm-Nd isochron data were collected and initial Nd isotopic composition was determined. The results are discussed with reference to the original source of these different basaltic fragments.

Dasch, E. J.↗
NASA NTRS1989

Analysis of Nd3+:glass, solar-pumped, high-powr laser systems

The operating characteristics of Nd(3+):glass lasers energized by a solar concentrator were analyzed for the hosts YAG, silicate glass, and phosphate glass. The modeling is based on the slab zigzag laser geometry and assumes that chemical hardening methods for glass are successful in increasing glass hardness by a factor of 4. On this basis, it was found that a realistic 1-MW solar-pumped laser might be constructed from phosphate glass 4 sq m in area and 2 mm thick. If YAG were the host medium, a 1-MW solar-pumped laser need only be 0.5 sq m in area and 0.5 cm thick, which is already possible. In addition, Nd(3+) doped glass fibers were found to be excellent solar-pumped laser candidates. The small diameter of fibers eliminates thermal stress problems, and if their diameter is kept small (10 microns), they propagate a Gaussian single mode which can be expanded and transmitted long distances in space. Fiber lasers could then be used for communications in space or could be bundled and the individual beams summed or phase-matched for high-power operation.

Zapata, L. E.↗