SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An approximate theoretical method is presented which determined the limit cycle behavior of a helicopter model which has one or two nonlinear dampers. The relationship during unstable ground resonance oscillations between lagging motion of the blades and fuselage motion is discussed. An experiment was carried out on using a helicopter scale model. The experimental results agree with those of the theoretical analysis.
The approximation of the output response of a nonlinear system by the output response of a linear system to a desired order irrespective of the admissible input applied should prove useful for purposes of control generation and simulation. Given a nonlinear system, an integer k, and an open subset of state space, sufficient conditions are stated that such a linear approximation exists to order k for every point in the set. In addition, a method for finding the approximating linear systems is presented.
An analysis of density measurements of Ar, N2, O, and He made at 280 km with the gas analyzer aboard the polar-orbiting satellite Esro 4 has yielded a global model of the variations in temperature, density, and composition that occur in the disturbed thermosphere. In the model the increase of temperature over quiet conditions is a nonlinear function of the planetary geomagnetic index, its latitude profile being approximated by a fourth-power sin phi law, where phi is the 'invariant' magnetic latitude. A density wave proceeding from high latitudes is approximated by a fourth power cos phi law. A strong nonlinearity in the relation between the temperature variations and the variations in the height of the homopause explains a previously found behavioral difference in the variation of atomic oxygen during magnetic storms and during periods of sustained geomagnetic activity.
Experimentalists have produced all-optical switches capable of 100-fs responses. To adequately model such switches, nonlinear effects in optical materials (both instantaneous and dispersive) must be included. In principle, the behavior of electromagnetic fields in nonlinear dielectrics can be determined by solving Maxwell's equations subject to the assumption that the electric polarization has a nonlinear relation to the electric field. However, until our previous work, the resulting nonlinear Maxwell's equations have not been solved directly. Rather, approximations have been made that result in a class of generalized nonlinear Schrodinger equations (GNLSE) that solve only for the envelope of the optical pulses. In this paper, we present first-time calculations from the vector nonlinear Maxwell's equations of femtosecond soliton propagation and scattering, including carrier waves, in two-dimensional systems of dielectric waveguides exhibiting the Kerr and Raman quantum effects. We use the finite-difference time-domain (FD-TD) method in an extension of our 1-D work. There, in a fundamental innovation, we treated the linear and nonlinear convolutions for the electric polarization as new dependent variables. By differentiating these convolutions in the time domain, we derived an equivalent system of coupled, nonlinear second-order ODE's. These equations together with Maxwell's equations form the system that is solved to determine the electromagnetic fields in inhomogeneous nonlinear dispersive media. Backstorage in time is limited to only that needed by the time-integration algorithm for the ODE's, rather than that needed to store the time-history of the kernel functions of the convolutions (1000-10,000 time steps). Thus, a 2-D nonlinear optics model from Maxwell's equations is now feasible.
A high-order linearized model of helicopter flight dynamics is extracted from a nonlinear time domain simulation. The model has 29 states that describe the fuselage rigid body degrees of freedom, the flap and lag dynamics in a nonrotating coordinate system, the inflow dynamics, the delayed entry of the horizontal tail into the main rotor wake, and, approximately, the blade torsion dynamics. The nonlinear simulation is obtained by extensively modifying the GENHEL computer program. The results indicate that the agreement between the linearized and the nonlinear model is good for small perturbations, and deteriorates for large amplitude maneuvers.
The collective interactions of nanoparticles arranged in periodic structures give rise to high‐ in‐plane diffractive modes known as surface lattice resonances. Although these resonances and their broader implications have been extensively studied within the framework of classical electrodynamics and linear response theory, a quantum optical theory capable of describing the dynamics of these structures, especially in the presence of material nonlinearities beyond ad hoc few‐mode approximations, is largely missing. To this end, we consider a lattice of metallic nanoparticles coupled to the electromagnetic field and derive the quantum input–output relations within the electric dipole approximation. As applications, we analyze coupling between the nanoparticle array and external quantum emitters, and show how the formalism extends to molecular optomechanics, where the high ‐factors of SLRs enable coupling to collective vibrational modes. We further consider arrays composed of saturable excitonic emitters, demonstrating how emitter nonlinearities can be used to switch the SLR condition between electronic transitions. Using a perturbative approach that accounts for population dynamics, we show how these effects can be probed in pump–probe experiments and give rise to nonlinear phase‐matching phenomena. Our work provides a microscopic framework for modeling SLRs interacting with quantum emitters without phenomenological descriptions of the electromagnetic environment.
The accurate calculation of stresses at boundaries and interfaces where FEM analysis may be unreliable is presently undertaken by an error analysis that derives a continuous approximation to discrete finite-element data, which can be differentiated to compute continuous stresses for component-failure predictions. An evaluation is conducted of this approximation in the context of the nonlinear PDEs. A novel interpolation formula which is a simple modification of the double Fourier sine series is used to reduce truncation errors near the rectangular plate boundary by means of an 'extended grid'. Results are presented from a FEM solution, a conventional double-Fourier series' continuous approximation, and a solution applying interpolation on the extended grid, which yields superior convergence properties near the plate boundaries.
Transistor design for extremely high frequency applications requires consideration of the interaction between the device and the circuit to which it is connected. Traditional analytical transistor models are to approximate at some of these frequencies and may not account for variations of dopants and semiconductor materials (especially some of the newer materials) within the device. Physically based models of device performance are required. These are based on coupled systems of partial differential equations and typically require 20 minutes of Cray computer time for a single AC operating point. A technique is presented to extract parameters from a few partial differential equation solutions for the device to create a nonlinear equivalent circuit model which runs in approximately 1 second of personal computer time. This nonlinear equivalent circuit model accurately replicates the contact current properties of the device as computed by the partial differential solver on which it is based. Using the nonlinear equivalent circuit model of the device, optimization of systems design can be performed based on device/circuit interactions.
Collisions between particles in a low density plasma are described by the Fokker–Planck collision operator. In applications, this nonlinear integro-differential operator is often approximated by linearised or ad-hoc model operators due to computational cost and complexity. In this work, we present an implementation of the nonlinear Fokker–Planck collision operator written in terms of Rosenbluth potentials in the Rosenbluth–MacDonald–Judd (RMJ) form. The Rosenbluth potentials may be obtained either by direct integration or by solving partial differential equations (PDEs) similar to Poisson's equation: we optimise for performance and scalability by using sparse matrices to solve the relevant PDEs. We represent the distribution function using a tensor-product continuous-Galerkin finite-element representation and we derive and describe the implementation of the weak form of the collision operator. We present tests demonstrating a successful implementation using an explicit time integrator and we comment on the speed and accuracy of the operator. Finally, we speculate on the potential for applications in the current and next generation of kinetic plasma models.
A nonlinear multigrid solver for two-phase flow and transport in a mixed fractional-flow velocity-pressure-saturation formulation is proposed. The solver, which is under the framework of the full approximation scheme (FAS), extends our previous work on nonlinear multigrid for heterogeneous diffusion problems. The coarse spaces in the multigrid hierarchy are constructed by first aggregating degrees of freedom, and then solving some local flow problems. The mixed formulation and the choice of coarse spaces allow us to assemble the coarse problems without visiting finer levels during the solving phase, which is crucial for the scalability of multigrid methods. Specifically, a natural generalization of the upwind flux can be evaluated directly on coarse levels using the precomputed coarse flux basis vectors. We find that the resulting solver is applicable to problems discretized on general unstructured grids. The performance of the proposed nonlinear multigrid solver in comparison with the standard single level Newton's method is demonstrated through challenging numerical examples. It is observed that the proposed solver is robust for highly nonlinear problems and clearly outperforms Newton's method in the case of high Courant-Friedrichs-Lewy (CFL) numbers.
As more and more nonlinear estimation techniques become available, our interest is in finding out what performance improvement, if any, they can provide for practical nonlinear problems that have been traditionally solved using linear methods. In this paper we examine the problem of estimating spacecraft position using conical scan (conscan) for NASA's Deep Space Network antennas. We show that for additive disturbances on antenna power measurement, the problem can be transformed into a linear one, and we present a general solution to this problem, with the least square solution reported in literature as a special case. We also show that for additive disturbances on antenna position, the problem is a truly nonlinear one, and we present two approximate solutions based on linearization and Unscented Transformation respectively, and one 'exact' solution based on Markov Chain Monte Carlo (MCMC) method. Simulations show that, with the amount of data collected in practice, linear methods perform almost the same as MCMC methods. It is only when we artificially reduce the amount of collected data and increase the level of noise that nonlinear methods show significantly better accuracy than that achieved by linear methods, at the expense of more computation.
Nonlinear mathematical-programming-based design optimization can be an elegant method. However, the calculations required to generate the merit function, constraints, and their gradients, which are frequently required, can make the process computational intensive. The computational burden can be greatly reduced by using approximating analyzers derived from an original analyzer utilizing neural networks and linear regression methods. The experience gained from using both of these approximation methods in the design optimization of a high speed civil transport aircraft is the subject of this paper. The Langley Research Center's Flight Optimization System was selected for the aircraft analysis. This software was exercised to generate a set of training data with which a neural network and a regression method were trained, thereby producing the two approximating analyzers. The derived analyzers were coupled to the Lewis Research Center's CometBoards test bed to provide the optimization capability. With the combined software, both approximation methods were examined for use in aircraft design optimization, and both performed satisfactorily. The CPU time for solution of the problem, which had been measured in hours, was reduced to minutes with the neural network approximation and to seconds with the regression method. Instability encountered in the aircraft analysis software at certain design points was also eliminated. On the other hand, there were costs and difficulties associated with training the approximating analyzers. The CPU time required to generate the input-output pairs and to train the approximating analyzers was seven times that required for solution of the problem.
An algorithm is described which solves the parameters X = (x1,x2,...,xm) and p in an approximation problem Ax nearly equal to y(p), where the parameter p occurs nonlinearly in y. Instead of linearization methods, which require an approximate value of p to be supplied as a priori information, and which may lead to the finding of local minima, the proposed algorithm finds the global minimum by permitting the use of series expansions of arbitrary order, exploiting an a priori knowledge that the addition of a particular function, corresponding to a new column in A, will not improve the goodness of the approximation.
Abstract Koopman operators model nonlinear dynamics as a linear dynamic system acting on a nonlinear function as the state. This nonstandard state is often called a Koopman observable and is usually approximated numerically by a superposition of functions drawn from a dictionary . In a widely used algorithm, extended dynamic mode decomposition (EDMD), the dictionary functions are drawn from a fixed class of functions. Deep learning combined with EDMD has been used to learn novel dictionary functions in an algorithm called deep dynamic mode decomposition (deepDMD). The learned representation both (1) accurately models and (2) scales well with the dimension of the original nonlinear system. In this paper, we analyze the learned dictionaries from deepDMD and explore the theoretical basis for their strong performance. We explore State-Inclusive Logistic Lifting (SILL) dictionary functions to approximate Koopman observables. Error analysis of these dictionary functions show they satisfy a property of subspace approximation, which we define as uniform finite approximate closure. Typically, a Koopman dictionary’s nonlinear functions are homogeneous. In this paper, we discover that structured mixing of heterogeneous dictionary functions drawn from different classes of nonlinear functions achieve the same accuracy and dimensional scaling as the deep-learning-based deepDMD algorithm Yeung et al. ( In: 2019 American Control Conference (ACC), 2019). We specifically show this by building a heterogeneous dictionary comprised of SILL functions and conjunctive radial basis functions (RBFs). This mixed dictionary achieves similar accuracy and dimensional scaling to deepDMD with an order of magnitude reduction in parameters, while maintaining geometric interpretability. These results strengthen the viability of dictionary-based Koopman models to solving high-dimensional nonlinear learning problems.
Projection based dimensionality reduction is used to approximate the full discretiza tion of a PDE problem in order to reduce the cost of its numerical simulation while staying faithful to the full dynamics. For nonlinear problems, hyperreduction methods are additionally needed to remove the dependence of the nonlinear terms on the full problem’s size. In this project, we develop an energy conserving hyperreduction method and apply it to Eulerian-Lagrangian hydrodynamics problems, demonstrating that the reduced model successfully accelerates the numerical simulations while conserving the problem’s total energy with high accuracy.
The numerical solution of stiff initial value problems, which lead to the problem of solving large systems of mildly nonlinear equations are considered. For many problems derived from engineering and science, a solution is possible only with methods derived from iterative linear equation solvers. A common approach to solving the nonlinear equations is to employ an approximate solution obtained from an explicit method. The error is examined to determine how it is distributed among the stiff and non-stiff components, which bears on the choice of an iterative method. The conclusion is that error is (roughly) uniformly distributed, a fact that suggests the Chebyshev method (and the accompanying Manteuffel adaptive parameter algorithm). This method is described, also commenting on Richardson's method and its advantages for large problems. Richardson's method and the Chebyshev method with the Mantueffel algorithm are applied to the solution of the nonlinear equations by Newton's method.
A sonic boom is a nonlinear event whose propagation can be modeled involving two stages. The first stage consists of ray path calculations using linear approximations, while the second stage deals with a nonlinear transport of the acoustic energy along these paths. This presentation discusses a second-order finite difference numerical approach used to predict the ray paths in range-dependent atmospheres and compares it to existing finite difference schemes. The approach is validated using exact solutions obtained for stratified atmospheres. In the second stage, the geometrical spreading effect needed in determining sonic boom waveforms from a Burgers' equation is obtained using a method that only needs a single ray rather than four rays required by most existing sonic boom propagation codes. The single-ray method calculates the Jacobian, associated with the coordinate transformation from a suitable ray coordinate system to the Cartesian coordinate system, directly from the ray tracing equations. While the four-ray method approximates the geometrical spreading using a finite difference scheme involving the four rays, the single-ray method does not rely on this approximation and instead depends purely on the acoustical kinematic properties of the atmosphere. Comparisons of results using these two methods are discussed.
The classical field approximation is widely used to better understand the predictions of ultralight dark matter. Here, in this work, we use the truncated Wigner approximation method to test the classical field approximation of ultralight dark matter. This method approximates a quantum state as an ensemble of independently evolving realizations drawn from its Wigner function. The method is highly parallelizable and allows the direct simulation of quantum corrections and decoherence times in systems many times larger than have been previously studied in reference to ultralight dark matter. Our study involves simulation of systems in 1, 2, and 3 spatial dimensions. We simulate three systems, the condensation of a Gaussian random field in three spatial dimensions, a stable collapsed object in three spatial dimensions, and the merging of two stable objects in two spatial dimensions. We study the quantum corrections to the classical field theory in each case. We find that quantum corrections grow exponentially during nonlinear growth with the timescale being approximately equal to the system dynamical time. In stable systems the corrections grow quadratically. We also find that the primary effect of quantum corrections is to reduce the amplitude of fluctuations on the de Broglie scale in the spatial density. Finally, we find that the timescale associated with decoherence due to gravitational coupling to baryonic matter is at least as fast as the quantum corrections due to gravitational interactions. These results are consistent with the predictions of the classical field theory being accurate.